1 files changed, 128 insertions, 0 deletions
diff --git a/drivers/isdn/hardware/eicon/xdi_msg.h b/drivers/isdn/hardware/eicon/xdi_msg.h
new file mode 100644
index 000000000..0646079bf
--- /dev/null
+++ b/drivers/isdn/hardware/eicon/xdi_msg.h
@@ -0,0 +1,128 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* $Id: xdi_msg.h,v 1.1.2.2 2001/02/16 08:40:36 armin Exp $ */
+
+#ifndef __DIVA_XDI_UM_CFG_MESSAGE_H__
+#define __DIVA_XDI_UM_CFG_MESSAGE_H__
+
+/*
+  Definition of messages used to communicate between
+  XDI device driver and user mode configuration utility
+*/
+
+/*
+  As acknowledge one DWORD - card ordinal will be read from the card
+*/
+#define DIVA_XDI_UM_CMD_GET_CARD_ORDINAL	0
+
+/*
+  no acknowledge will be generated, memory block will be written in the
+  memory at given offset
+*/
+#define DIVA_XDI_UM_CMD_WRITE_SDRAM_BLOCK	1
+
+/*
+  no acknowledge will be genatated, FPGA will be programmed
+*/
+#define DIVA_XDI_UM_CMD_WRITE_FPGA				2
+
+/*
+  As acknowledge block of SDRAM will be read in the user buffer
+*/
+#define DIVA_XDI_UM_CMD_READ_SDRAM				3
+
+/*
+  As acknowledge dword with serial number will be read in the user buffer
+*/
+#define DIVA_XDI_UM_CMD_GET_SERIAL_NR			4
+
+/*
+  As acknowledge struct consisting from 9 dwords with PCI info.
+  dword[0...7] = 8 PCI BARS
+  dword[9]		 = IRQ
+*/
+#define DIVA_XDI_UM_CMD_GET_PCI_HW_CONFIG	5
+
+/*
+  Reset of the board + activation of primary
+  boot loader
+*/
+#define DIVA_XDI_UM_CMD_RESET_ADAPTER			6
+
+/*
+  Called after code download to start adapter
+  at specified address
+  Start does set new set of features due to fact that we not know
+  if protocol features have changed
+*/
+#define DIVA_XDI_UM_CMD_START_ADAPTER			7
+
+/*
+  Stop adapter, called if user
+  wishes to stop adapter without unload
+  of the driver, to reload adapter with
+  different protocol
+*/
+#define DIVA_XDI_UM_CMD_STOP_ADAPTER			8
+
+/*
+  Get state of current adapter
+  Acknowledge is one dword with following values:
+  0 - adapter ready for download
+  1 - adapter running
+  2 - adapter dead
+  3 - out of service, driver should be restarted or hardware problem
+*/
+#define DIVA_XDI_UM_CMD_GET_CARD_STATE		9
+
+/*
+  Reads XLOG entry from the card
+*/
+#define DIVA_XDI_UM_CMD_READ_XLOG_ENTRY		10
+
+/*
+  Set untranslated protocol code features
+*/
+#define DIVA_XDI_UM_CMD_SET_PROTOCOL_FEATURES	11
+
+typedef struct _diva_xdi_um_cfg_cmd_data_set_features {
+	dword features;
+} diva_xdi_um_cfg_cmd_data_set_features_t;
+
+typedef struct _diva_xdi_um_cfg_cmd_data_start {
+	dword offset;
+	dword features;
+} diva_xdi_um_cfg_cmd_data_start_t;
+
+typedef struct _diva_xdi_um_cfg_cmd_data_write_sdram {
+	dword ram_number;
+	dword offset;
+	dword length;
+} diva_xdi_um_cfg_cmd_data_write_sdram_t;
+
+typedef struct _diva_xdi_um_cfg_cmd_data_write_fpga {
+	dword fpga_number;
+	dword image_length;
+} diva_xdi_um_cfg_cmd_data_write_fpga_t;
+
+typedef struct _diva_xdi_um_cfg_cmd_data_read_sdram {
+	dword ram_number;
+	dword offset;
+	dword length;
+} diva_xdi_um_cfg_cmd_data_read_sdram_t;
+
+typedef union _diva_xdi_um_cfg_cmd_data {
+	diva_xdi_um_cfg_cmd_data_write_sdram_t write_sdram;
+	diva_xdi_um_cfg_cmd_data_write_fpga_t write_fpga;
+	diva_xdi_um_cfg_cmd_data_read_sdram_t read_sdram;
+	diva_xdi_um_cfg_cmd_data_start_t start;
+	diva_xdi_um_cfg_cmd_data_set_features_t features;
+} diva_xdi_um_cfg_cmd_data_t;
+
+typedef struct _diva_xdi_um_cfg_cmd {
+	dword adapter;		/* Adapter number 1...N */
+	dword command;
+	diva_xdi_um_cfg_cmd_data_t command_data;
+	dword data_length;	/* Plain binary data will follow */
+} diva_xdi_um_cfg_cmd_t;
+
+#endif