1 files changed, 452 insertions, 0 deletions
diff --git a/drivers/mfd/intel_msic.c b/drivers/mfd/intel_msic.c
new file mode 100644
index 000000000..2017446c5
--- /dev/null
+++ b/drivers/mfd/intel_msic.c
@@ -0,0 +1,452 @@
+/*
+ * Driver for Intel MSIC
+ *
+ * Copyright (C) 2011, Intel Corporation
+ * Author: Mika Westerberg <mika.westerberg@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/init.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/intel_msic.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <asm/intel_scu_ipc.h>
+
+#define MSIC_VENDOR(id)		((id >> 6) & 3)
+#define MSIC_VERSION(id)	(id & 0x3f)
+#define MSIC_MAJOR(id)		('A' + ((id >> 3) & 7))
+#define MSIC_MINOR(id)		(id & 7)
+
+/*
+ * MSIC interrupt tree is readable from SRAM at INTEL_MSIC_IRQ_PHYS_BASE.
+ * Since IRQ block starts from address 0x002 we need to subtract that from
+ * the actual IRQ status register address.
+ */
+#define MSIC_IRQ_STATUS(x)	(INTEL_MSIC_IRQ_PHYS_BASE + ((x) - 2))
+#define MSIC_IRQ_STATUS_ACCDET	MSIC_IRQ_STATUS(INTEL_MSIC_ACCDET)
+
+/*
+ * The SCU hardware has limitation of 16 bytes per read/write buffer on
+ * Medfield.
+ */
+#define SCU_IPC_RWBUF_LIMIT	16
+
+/**
+ * struct intel_msic - an MSIC MFD instance
+ * @pdev: pointer to the platform device
+ * @vendor: vendor ID
+ * @version: chip version
+ * @irq_base: base address of the mapped MSIC SRAM interrupt tree
+ */
+struct intel_msic {
+	struct platform_device		*pdev;
+	unsigned			vendor;
+	unsigned			version;
+	void __iomem			*irq_base;
+};
+
+static struct resource msic_touch_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_adc_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_battery_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_gpio_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_audio_resources[] = {
+	{
+		.name		= "IRQ",
+		.flags		= IORESOURCE_IRQ,
+	},
+	/*
+	 * We will pass IRQ_BASE to the driver now but this can be removed
+	 * when/if the driver starts to use intel_msic_irq_read().
+	 */
+	{
+		.name		= "IRQ_BASE",
+		.flags		= IORESOURCE_MEM,
+		.start		= MSIC_IRQ_STATUS_ACCDET,
+		.end		= MSIC_IRQ_STATUS_ACCDET,
+	},
+};
+
+static struct resource msic_hdmi_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_thermal_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_power_btn_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct resource msic_ocd_resources[] = {
+	{
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+/*
+ * Devices that are part of the MSIC and are available via firmware
+ * populated SFI DEVS table.
+ */
+static struct mfd_cell msic_devs[] = {
+	[INTEL_MSIC_BLOCK_TOUCH]	= {
+		.name			= "msic_touch",
+		.num_resources		= ARRAY_SIZE(msic_touch_resources),
+		.resources		= msic_touch_resources,
+	},
+	[INTEL_MSIC_BLOCK_ADC]		= {
+		.name			= "msic_adc",
+		.num_resources		= ARRAY_SIZE(msic_adc_resources),
+		.resources		= msic_adc_resources,
+	},
+	[INTEL_MSIC_BLOCK_BATTERY]	= {
+		.name			= "msic_battery",
+		.num_resources		= ARRAY_SIZE(msic_battery_resources),
+		.resources		= msic_battery_resources,
+	},
+	[INTEL_MSIC_BLOCK_GPIO]		= {
+		.name			= "msic_gpio",
+		.num_resources		= ARRAY_SIZE(msic_gpio_resources),
+		.resources		= msic_gpio_resources,
+	},
+	[INTEL_MSIC_BLOCK_AUDIO]	= {
+		.name			= "msic_audio",
+		.num_resources		= ARRAY_SIZE(msic_audio_resources),
+		.resources		= msic_audio_resources,
+	},
+	[INTEL_MSIC_BLOCK_HDMI]		= {
+		.name			= "msic_hdmi",
+		.num_resources		= ARRAY_SIZE(msic_hdmi_resources),
+		.resources		= msic_hdmi_resources,
+	},
+	[INTEL_MSIC_BLOCK_THERMAL]	= {
+		.name			= "msic_thermal",
+		.num_resources		= ARRAY_SIZE(msic_thermal_resources),
+		.resources		= msic_thermal_resources,
+	},
+	[INTEL_MSIC_BLOCK_POWER_BTN]	= {
+		.name			= "msic_power_btn",
+		.num_resources		= ARRAY_SIZE(msic_power_btn_resources),
+		.resources		= msic_power_btn_resources,
+	},
+	[INTEL_MSIC_BLOCK_OCD]		= {
+		.name			= "msic_ocd",
+		.num_resources		= ARRAY_SIZE(msic_ocd_resources),
+		.resources		= msic_ocd_resources,
+	},
+};
+
+/*
+ * Other MSIC related devices which are not directly available via SFI DEVS
+ * table. These can be pseudo devices, regulators etc. which are needed for
+ * different purposes.
+ *
+ * These devices appear only after the MSIC driver itself is initialized so
+ * we can guarantee that the SCU IPC interface is ready.
+ */
+static const struct mfd_cell msic_other_devs[] = {
+	/* Audio codec in the MSIC */
+	{
+		.id			= -1,
+		.name			= "sn95031",
+	},
+};
+
+/**
+ * intel_msic_reg_read - read a single MSIC register
+ * @reg: register to read
+ * @val: register value is placed here
+ *
+ * Read a single register from MSIC. Returns %0 on success and negative
+ * errno in case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_reg_read(unsigned short reg, u8 *val)
+{
+	return intel_scu_ipc_ioread8(reg, val);
+}
+EXPORT_SYMBOL_GPL(intel_msic_reg_read);
+
+/**
+ * intel_msic_reg_write - write a single MSIC register
+ * @reg: register to write
+ * @val: value to write to that register
+ *
+ * Write a single MSIC register. Returns 0 on success and negative
+ * errno in case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_reg_write(unsigned short reg, u8 val)
+{
+	return intel_scu_ipc_iowrite8(reg, val);
+}
+EXPORT_SYMBOL_GPL(intel_msic_reg_write);
+
+/**
+ * intel_msic_reg_update - update a single MSIC register
+ * @reg: register to update
+ * @val: value to write to the register
+ * @mask: specifies which of the bits are updated (%0 = don't update,
+ *        %1 = update)
+ *
+ * Perform an update to a register @reg. @mask is used to specify which
+ * bits are updated. Returns %0 in case of success and negative errno in
+ * case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_reg_update(unsigned short reg, u8 val, u8 mask)
+{
+	return intel_scu_ipc_update_register(reg, val, mask);
+}
+EXPORT_SYMBOL_GPL(intel_msic_reg_update);
+
+/**
+ * intel_msic_bulk_read - read an array of registers
+ * @reg: array of register addresses to read
+ * @buf: array where the read values are placed
+ * @count: number of registers to read
+ *
+ * Function reads @count registers from the MSIC using addresses passed in
+ * @reg. Read values are placed in @buf. Reads are performed atomically
+ * wrt. MSIC.
+ *
+ * Returns %0 in case of success and negative errno in case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_bulk_read(unsigned short *reg, u8 *buf, size_t count)
+{
+	if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
+		return -EINVAL;
+
+	return intel_scu_ipc_readv(reg, buf, count);
+}
+EXPORT_SYMBOL_GPL(intel_msic_bulk_read);
+
+/**
+ * intel_msic_bulk_write - write an array of values to the MSIC registers
+ * @reg: array of registers to write
+ * @buf: values to write to each register
+ * @count: number of registers to write
+ *
+ * Function writes @count registers in @buf to MSIC. Writes are performed
+ * atomically wrt MSIC. Returns %0 in case of success and negative errno in
+ * case of failure.
+ *
+ * Function may sleep.
+ */
+int intel_msic_bulk_write(unsigned short *reg, u8 *buf, size_t count)
+{
+	if (WARN_ON(count > SCU_IPC_RWBUF_LIMIT))
+		return -EINVAL;
+
+	return intel_scu_ipc_writev(reg, buf, count);
+}
+EXPORT_SYMBOL_GPL(intel_msic_bulk_write);
+
+/**
+ * intel_msic_irq_read - read a register from an MSIC interrupt tree
+ * @msic: MSIC instance
+ * @reg: interrupt register (between %INTEL_MSIC_IRQLVL1 and
+ *	 %INTEL_MSIC_RESETIRQ2)
+ * @val: value of the register is placed here
+ *
+ * This function can be used by an MSIC subdevice interrupt handler to read
+ * a register value from the MSIC interrupt tree. In this way subdevice
+ * drivers don't have to map in the interrupt tree themselves but can just
+ * call this function instead.
+ *
+ * Function doesn't sleep and is callable from interrupt context.
+ *
+ * Returns %-EINVAL if @reg is outside of the allowed register region.
+ */
+int intel_msic_irq_read(struct intel_msic *msic, unsigned short reg, u8 *val)
+{
+	if (WARN_ON(reg < INTEL_MSIC_IRQLVL1 || reg > INTEL_MSIC_RESETIRQ2))
+		return -EINVAL;
+
+	*val = readb(msic->irq_base + (reg - INTEL_MSIC_IRQLVL1));
+	return 0;
+}
+EXPORT_SYMBOL_GPL(intel_msic_irq_read);
+
+static int intel_msic_init_devices(struct intel_msic *msic)
+{
+	struct platform_device *pdev = msic->pdev;
+	struct intel_msic_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	int ret, i;
+
+	if (pdata->gpio) {
+		struct mfd_cell *cell = &msic_devs[INTEL_MSIC_BLOCK_GPIO];
+
+		cell->platform_data = pdata->gpio;
+		cell->pdata_size = sizeof(*pdata->gpio);
+	}
+
+	if (pdata->ocd) {
+		unsigned gpio = pdata->ocd->gpio;
+
+		ret = devm_gpio_request_one(&pdev->dev, gpio,
+					GPIOF_IN, "ocd_gpio");
+		if (ret) {
+			dev_err(&pdev->dev, "failed to register OCD GPIO\n");
+			return ret;
+		}
+
+		ret = gpio_to_irq(gpio);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "no IRQ number for OCD GPIO\n");
+			return ret;
+		}
+
+		/* Update the IRQ number for the OCD */
+		pdata->irq[INTEL_MSIC_BLOCK_OCD] = ret;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(msic_devs); i++) {
+		if (!pdata->irq[i])
+			continue;
+
+		ret = mfd_add_devices(&pdev->dev, -1, &msic_devs[i], 1, NULL,
+				      pdata->irq[i], NULL);
+		if (ret)
+			goto fail;
+	}
+
+	ret = mfd_add_devices(&pdev->dev, 0, msic_other_devs,
+			      ARRAY_SIZE(msic_other_devs), NULL, 0, NULL);
+	if (ret)
+		goto fail;
+
+	return 0;
+
+fail:
+	mfd_remove_devices(&pdev->dev);
+
+	return ret;
+}
+
+static void intel_msic_remove_devices(struct intel_msic *msic)
+{
+	struct platform_device *pdev = msic->pdev;
+
+	mfd_remove_devices(&pdev->dev);
+}
+
+static int intel_msic_probe(struct platform_device *pdev)
+{
+	struct intel_msic_platform_data *pdata = dev_get_platdata(&pdev->dev);
+	struct intel_msic *msic;
+	struct resource *res;
+	u8 id0, id1;
+	int ret;
+
+	if (!pdata) {
+		dev_err(&pdev->dev, "no platform data passed\n");
+		return -EINVAL;
+	}
+
+	/* First validate that we have an MSIC in place */
+	ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID0, &id0);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to identify the MSIC chip (ID0)\n");
+		return -ENXIO;
+	}
+
+	ret = intel_scu_ipc_ioread8(INTEL_MSIC_ID1, &id1);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to identify the MSIC chip (ID1)\n");
+		return -ENXIO;
+	}
+
+	if (MSIC_VENDOR(id0) != MSIC_VENDOR(id1)) {
+		dev_err(&pdev->dev, "invalid vendor ID: %x, %x\n", id0, id1);
+		return -ENXIO;
+	}
+
+	msic = devm_kzalloc(&pdev->dev, sizeof(*msic), GFP_KERNEL);
+	if (!msic)
+		return -ENOMEM;
+
+	msic->vendor = MSIC_VENDOR(id0);
+	msic->version = MSIC_VERSION(id0);
+	msic->pdev = pdev;
+
+	/*
+	 * Map in the MSIC interrupt tree area in SRAM. This is exposed to
+	 * the clients via intel_msic_irq_read().
+	 */
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	msic->irq_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(msic->irq_base))
+		return PTR_ERR(msic->irq_base);
+
+	platform_set_drvdata(pdev, msic);
+
+	ret = intel_msic_init_devices(msic);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize MSIC devices\n");
+		return ret;
+	}
+
+	dev_info(&pdev->dev, "Intel MSIC version %c%d (vendor %#x)\n",
+		 MSIC_MAJOR(msic->version), MSIC_MINOR(msic->version),
+		 msic->vendor);
+
+	return 0;
+}
+
+static int intel_msic_remove(struct platform_device *pdev)
+{
+	struct intel_msic *msic = platform_get_drvdata(pdev);
+
+	intel_msic_remove_devices(msic);
+
+	return 0;
+}
+
+static struct platform_driver intel_msic_driver = {
+	.probe		= intel_msic_probe,
+	.remove		= intel_msic_remove,
+	.driver		= {
+		.name	= "intel_msic",
+	},
+};
+builtin_platform_driver(intel_msic_driver);