diff options
Diffstat (limited to 'drivers/phy/broadcom/phy-bcm-ns-usb3.c')
| -rw-r--r-- | drivers/phy/broadcom/phy-bcm-ns-usb3.c | 405 |
1 files changed, 405 insertions, 0 deletions
diff --git a/drivers/phy/broadcom/phy-bcm-ns-usb3.c b/drivers/phy/broadcom/phy-bcm-ns-usb3.c new file mode 100644 index 000000000..a53ae128e --- /dev/null +++ b/drivers/phy/broadcom/phy-bcm-ns-usb3.c @@ -0,0 +1,405 @@ +/* + * Broadcom Northstar USB 3.0 PHY Driver + * + * Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl> + * Copyright (C) 2016 Broadcom + * + * All magic values used for initialization (and related comments) were obtained + * from Broadcom's SDK: + * Copyright (c) Broadcom Corp, 2012 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/bcma/bcma.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/mdio.h> +#include <linux/module.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> +#include <linux/phy/phy.h> +#include <linux/slab.h> + +#define BCM_NS_USB3_MII_MNG_TIMEOUT_US 1000 /* usecs */ + +#define BCM_NS_USB3_PHY_BASE_ADDR_REG 0x1f +#define BCM_NS_USB3_PHY_PLL30_BLOCK 0x8000 +#define BCM_NS_USB3_PHY_TX_PMD_BLOCK 0x8040 +#define BCM_NS_USB3_PHY_PIPE_BLOCK 0x8060 + +/* Registers of PLL30 block */ +#define BCM_NS_USB3_PLL_CONTROL 0x01 +#define BCM_NS_USB3_PLLA_CONTROL0 0x0a +#define BCM_NS_USB3_PLLA_CONTROL1 0x0b + +/* Registers of TX PMD block */ +#define BCM_NS_USB3_TX_PMD_CONTROL1 0x01 + +/* Registers of PIPE block */ +#define BCM_NS_USB3_LFPS_CMP 0x02 +#define BCM_NS_USB3_LFPS_DEGLITCH 0x03 + +enum bcm_ns_family { + BCM_NS_UNKNOWN, + BCM_NS_AX, + BCM_NS_BX, +}; + +struct bcm_ns_usb3 { + struct device *dev; + enum bcm_ns_family family; + void __iomem *dmp; + void __iomem *ccb_mii; + struct mdio_device *mdiodev; + struct phy *phy; + + int (*phy_write)(struct bcm_ns_usb3 *usb3, u16 reg, u16 value); +}; + +static const struct of_device_id bcm_ns_usb3_id_table[] = { + { + .compatible = "brcm,ns-ax-usb3-phy", + .data = (int *)BCM_NS_AX, + }, + { + .compatible = "brcm,ns-bx-usb3-phy", + .data = (int *)BCM_NS_BX, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table); + +static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg, + u16 value) +{ + return usb3->phy_write(usb3, reg, value); +} + +static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3) +{ + int err; + + /* USB3 PLL Block */ + err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_PLL30_BLOCK); + if (err < 0) + return err; + + /* Assert Ana_Pllseq start */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x1000); + + /* Assert CML Divider ratio to 26 */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400); + + /* Asserting PLL Reset */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0xc000); + + /* Deaaserting PLL Reset */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0x8000); + + /* Deasserting USB3 system reset */ + writel(0, usb3->dmp + BCMA_RESET_CTL); + + /* PLL frequency monitor enable */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x9000); + + /* PIPE Block */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_PIPE_BLOCK); + + /* CMPMAX & CMPMINTH setting */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_CMP, 0xf30d); + + /* DEGLITCH MIN & MAX setting */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_DEGLITCH, 0x6302); + + /* TXPMD block */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_TX_PMD_BLOCK); + + /* Enabling SSC */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003); + + return 0; +} + +static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3) +{ + int err; + + /* PLL30 block */ + err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_PLL30_BLOCK); + if (err < 0) + return err; + + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400); + + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, 0x80e0); + + bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x009c); + + /* Enable SSC */ + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, + BCM_NS_USB3_PHY_TX_PMD_BLOCK); + + bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x21d3); + + bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003); + + /* Deasserting USB3 system reset */ + writel(0, usb3->dmp + BCMA_RESET_CTL); + + return 0; +} + +static int bcm_ns_usb3_phy_init(struct phy *phy) +{ + struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy); + int err; + + /* Perform USB3 system soft reset */ + writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL); + + switch (usb3->family) { + case BCM_NS_AX: + err = bcm_ns_usb3_phy_init_ns_ax(usb3); + break; + case BCM_NS_BX: + err = bcm_ns_usb3_phy_init_ns_bx(usb3); + break; + default: + WARN_ON(1); + err = -ENOTSUPP; + } + + return err; +} + +static const struct phy_ops ops = { + .init = bcm_ns_usb3_phy_init, + .owner = THIS_MODULE, +}; + +/************************************************** + * MDIO driver code + **************************************************/ + +static int bcm_ns_usb3_mdiodev_phy_write(struct bcm_ns_usb3 *usb3, u16 reg, + u16 value) +{ + struct mdio_device *mdiodev = usb3->mdiodev; + + return mdiobus_write(mdiodev->bus, mdiodev->addr, reg, value); +} + +static int bcm_ns_usb3_mdio_probe(struct mdio_device *mdiodev) +{ + struct device *dev = &mdiodev->dev; + const struct of_device_id *of_id; + struct phy_provider *phy_provider; + struct device_node *syscon_np; + struct bcm_ns_usb3 *usb3; + struct resource res; + int err; + + usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL); + if (!usb3) + return -ENOMEM; + + usb3->dev = dev; + usb3->mdiodev = mdiodev; + + of_id = of_match_device(bcm_ns_usb3_id_table, dev); + if (!of_id) + return -EINVAL; + usb3->family = (enum bcm_ns_family)of_id->data; + + syscon_np = of_parse_phandle(dev->of_node, "usb3-dmp-syscon", 0); + err = of_address_to_resource(syscon_np, 0, &res); + of_node_put(syscon_np); + if (err) + return err; + + usb3->dmp = devm_ioremap_resource(dev, &res); + if (IS_ERR(usb3->dmp)) { + dev_err(dev, "Failed to map DMP regs\n"); + return PTR_ERR(usb3->dmp); + } + + usb3->phy_write = bcm_ns_usb3_mdiodev_phy_write; + + usb3->phy = devm_phy_create(dev, NULL, &ops); + if (IS_ERR(usb3->phy)) { + dev_err(dev, "Failed to create PHY\n"); + return PTR_ERR(usb3->phy); + } + + phy_set_drvdata(usb3->phy, usb3); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct mdio_driver bcm_ns_usb3_mdio_driver = { + .mdiodrv = { + .driver = { + .name = "bcm_ns_mdio_usb3", + .of_match_table = bcm_ns_usb3_id_table, + }, + }, + .probe = bcm_ns_usb3_mdio_probe, +}; + +/************************************************** + * Platform driver code + **************************************************/ + +static int bcm_ns_usb3_wait_reg(struct bcm_ns_usb3 *usb3, void __iomem *addr, + u32 mask, u32 value, unsigned long timeout) +{ + unsigned long deadline = jiffies + timeout; + u32 val; + + do { + val = readl(addr); + if ((val & mask) == value) + return 0; + cpu_relax(); + udelay(10); + } while (!time_after_eq(jiffies, deadline)); + + dev_err(usb3->dev, "Timeout waiting for register %p\n", addr); + + return -EBUSY; +} + +static inline int bcm_ns_usb3_mii_mng_wait_idle(struct bcm_ns_usb3 *usb3) +{ + return bcm_ns_usb3_wait_reg(usb3, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL, + 0x0100, 0x0000, + usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US)); +} + +static int bcm_ns_usb3_platform_phy_write(struct bcm_ns_usb3 *usb3, u16 reg, + u16 value) +{ + u32 tmp = 0; + int err; + + err = bcm_ns_usb3_mii_mng_wait_idle(usb3); + if (err < 0) { + dev_err(usb3->dev, "Couldn't write 0x%08x value\n", value); + return err; + } + + /* TODO: Use a proper MDIO bus layer */ + tmp |= 0x58020000; /* Magic value for MDIO PHY write */ + tmp |= reg << 18; + tmp |= value; + writel(tmp, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA); + + return bcm_ns_usb3_mii_mng_wait_idle(usb3); +} + +static int bcm_ns_usb3_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + const struct of_device_id *of_id; + struct bcm_ns_usb3 *usb3; + struct resource *res; + struct phy_provider *phy_provider; + + usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL); + if (!usb3) + return -ENOMEM; + + usb3->dev = dev; + + of_id = of_match_device(bcm_ns_usb3_id_table, dev); + if (!of_id) + return -EINVAL; + usb3->family = (enum bcm_ns_family)of_id->data; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dmp"); + usb3->dmp = devm_ioremap_resource(dev, res); + if (IS_ERR(usb3->dmp)) { + dev_err(dev, "Failed to map DMP regs\n"); + return PTR_ERR(usb3->dmp); + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ccb-mii"); + usb3->ccb_mii = devm_ioremap_resource(dev, res); + if (IS_ERR(usb3->ccb_mii)) { + dev_err(dev, "Failed to map ChipCommon B MII regs\n"); + return PTR_ERR(usb3->ccb_mii); + } + + /* Enable MDIO. Setting MDCDIV as 26 */ + writel(0x0000009a, usb3->ccb_mii + BCMA_CCB_MII_MNG_CTL); + + /* Wait for MDIO? */ + udelay(2); + + usb3->phy_write = bcm_ns_usb3_platform_phy_write; + + usb3->phy = devm_phy_create(dev, NULL, &ops); + if (IS_ERR(usb3->phy)) { + dev_err(dev, "Failed to create PHY\n"); + return PTR_ERR(usb3->phy); + } + + phy_set_drvdata(usb3->phy, usb3); + platform_set_drvdata(pdev, usb3); + + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); + if (!IS_ERR(phy_provider)) + dev_info(dev, "Registered Broadcom Northstar USB 3.0 PHY driver\n"); + + return PTR_ERR_OR_ZERO(phy_provider); +} + +static struct platform_driver bcm_ns_usb3_driver = { + .probe = bcm_ns_usb3_probe, + .driver = { + .name = "bcm_ns_usb3", + .of_match_table = bcm_ns_usb3_id_table, + }, +}; + +static int __init bcm_ns_usb3_module_init(void) +{ + int err; + + /* + * For backward compatibility we register as MDIO and platform driver. + * After getting MDIO binding commonly used (e.g. switching all DT files + * to use it) we should deprecate the old binding and eventually drop + * support for it. + */ + + err = mdio_driver_register(&bcm_ns_usb3_mdio_driver); + if (err) + return err; + + err = platform_driver_register(&bcm_ns_usb3_driver); + if (err) + mdio_driver_unregister(&bcm_ns_usb3_mdio_driver); + + return err; +} +module_init(bcm_ns_usb3_module_init); + +static void __exit bcm_ns_usb3_module_exit(void) +{ + platform_driver_unregister(&bcm_ns_usb3_driver); + mdio_driver_unregister(&bcm_ns_usb3_mdio_driver); +} +module_exit(bcm_ns_usb3_module_exit) + +MODULE_LICENSE("GPL v2"); |