diff options
Diffstat (limited to 'drivers/soc/xilinx/xlnx_vcu.c')
| -rw-r--r-- | drivers/soc/xilinx/xlnx_vcu.c | 630 |
1 files changed, 630 insertions, 0 deletions
diff --git a/drivers/soc/xilinx/xlnx_vcu.c b/drivers/soc/xilinx/xlnx_vcu.c new file mode 100644 index 000000000..a840c0272 --- /dev/null +++ b/drivers/soc/xilinx/xlnx_vcu.c @@ -0,0 +1,630 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Xilinx VCU Init + * + * Copyright (C) 2016 - 2017 Xilinx, Inc. + * + * Contacts Dhaval Shah <dshah@xilinx.com> + */ +#include <linux/clk.h> +#include <linux/device.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_platform.h> +#include <linux/platform_device.h> + +/* Address map for different registers implemented in the VCU LogiCORE IP. */ +#define VCU_ECODER_ENABLE 0x00 +#define VCU_DECODER_ENABLE 0x04 +#define VCU_MEMORY_DEPTH 0x08 +#define VCU_ENC_COLOR_DEPTH 0x0c +#define VCU_ENC_VERTICAL_RANGE 0x10 +#define VCU_ENC_FRAME_SIZE_X 0x14 +#define VCU_ENC_FRAME_SIZE_Y 0x18 +#define VCU_ENC_COLOR_FORMAT 0x1c +#define VCU_ENC_FPS 0x20 +#define VCU_MCU_CLK 0x24 +#define VCU_CORE_CLK 0x28 +#define VCU_PLL_BYPASS 0x2c +#define VCU_ENC_CLK 0x30 +#define VCU_PLL_CLK 0x34 +#define VCU_ENC_VIDEO_STANDARD 0x38 +#define VCU_STATUS 0x3c +#define VCU_AXI_ENC_CLK 0x40 +#define VCU_AXI_DEC_CLK 0x44 +#define VCU_AXI_MCU_CLK 0x48 +#define VCU_DEC_VIDEO_STANDARD 0x4c +#define VCU_DEC_FRAME_SIZE_X 0x50 +#define VCU_DEC_FRAME_SIZE_Y 0x54 +#define VCU_DEC_FPS 0x58 +#define VCU_BUFFER_B_FRAME 0x5c +#define VCU_WPP_EN 0x60 +#define VCU_PLL_CLK_DEC 0x64 +#define VCU_GASKET_INIT 0x74 +#define VCU_GASKET_VALUE 0x03 + +/* vcu slcr registers, bitmask and shift */ +#define VCU_PLL_CTRL 0x24 +#define VCU_PLL_CTRL_RESET_MASK 0x01 +#define VCU_PLL_CTRL_RESET_SHIFT 0 +#define VCU_PLL_CTRL_BYPASS_MASK 0x01 +#define VCU_PLL_CTRL_BYPASS_SHIFT 3 +#define VCU_PLL_CTRL_FBDIV_MASK 0x7f +#define VCU_PLL_CTRL_FBDIV_SHIFT 8 +#define VCU_PLL_CTRL_POR_IN_MASK 0x01 +#define VCU_PLL_CTRL_POR_IN_SHIFT 1 +#define VCU_PLL_CTRL_PWR_POR_MASK 0x01 +#define VCU_PLL_CTRL_PWR_POR_SHIFT 2 +#define VCU_PLL_CTRL_CLKOUTDIV_MASK 0x03 +#define VCU_PLL_CTRL_CLKOUTDIV_SHIFT 16 +#define VCU_PLL_CTRL_DEFAULT 0 +#define VCU_PLL_DIV2 2 + +#define VCU_PLL_CFG 0x28 +#define VCU_PLL_CFG_RES_MASK 0x0f +#define VCU_PLL_CFG_RES_SHIFT 0 +#define VCU_PLL_CFG_CP_MASK 0x0f +#define VCU_PLL_CFG_CP_SHIFT 5 +#define VCU_PLL_CFG_LFHF_MASK 0x03 +#define VCU_PLL_CFG_LFHF_SHIFT 10 +#define VCU_PLL_CFG_LOCK_CNT_MASK 0x03ff +#define VCU_PLL_CFG_LOCK_CNT_SHIFT 13 +#define VCU_PLL_CFG_LOCK_DLY_MASK 0x7f +#define VCU_PLL_CFG_LOCK_DLY_SHIFT 25 +#define VCU_ENC_CORE_CTRL 0x30 +#define VCU_ENC_MCU_CTRL 0x34 +#define VCU_DEC_CORE_CTRL 0x38 +#define VCU_DEC_MCU_CTRL 0x3c +#define VCU_PLL_DIVISOR_MASK 0x3f +#define VCU_PLL_DIVISOR_SHIFT 4 +#define VCU_SRCSEL_MASK 0x01 +#define VCU_SRCSEL_SHIFT 0 +#define VCU_SRCSEL_PLL 1 + +#define VCU_PLL_STATUS 0x60 +#define VCU_PLL_STATUS_LOCK_STATUS_MASK 0x01 + +#define MHZ 1000000 +#define FVCO_MIN (1500U * MHZ) +#define FVCO_MAX (3000U * MHZ) +#define DIVISOR_MIN 0 +#define DIVISOR_MAX 63 +#define FRAC 100 +#define LIMIT (10 * MHZ) + +/** + * struct xvcu_device - Xilinx VCU init device structure + * @dev: Platform device + * @pll_ref: pll ref clock source + * @aclk: axi clock source + * @logicore_reg_ba: logicore reg base address + * @vcu_slcr_ba: vcu_slcr Register base address + * @coreclk: core clock frequency + */ +struct xvcu_device { + struct device *dev; + struct clk *pll_ref; + struct clk *aclk; + void __iomem *logicore_reg_ba; + void __iomem *vcu_slcr_ba; + u32 coreclk; +}; + +/** + * struct xvcu_pll_cfg - Helper data + * @fbdiv: The integer portion of the feedback divider to the PLL + * @cp: PLL charge pump control + * @res: PLL loop filter resistor control + * @lfhf: PLL loop filter high frequency capacitor control + * @lock_dly: Lock circuit configuration settings for lock windowsize + * @lock_cnt: Lock circuit counter setting + */ +struct xvcu_pll_cfg { + u32 fbdiv; + u32 cp; + u32 res; + u32 lfhf; + u32 lock_dly; + u32 lock_cnt; +}; + +static const struct xvcu_pll_cfg xvcu_pll_cfg[] = { + { 25, 3, 10, 3, 63, 1000 }, + { 26, 3, 10, 3, 63, 1000 }, + { 27, 4, 6, 3, 63, 1000 }, + { 28, 4, 6, 3, 63, 1000 }, + { 29, 4, 6, 3, 63, 1000 }, + { 30, 4, 6, 3, 63, 1000 }, + { 31, 6, 1, 3, 63, 1000 }, + { 32, 6, 1, 3, 63, 1000 }, + { 33, 4, 10, 3, 63, 1000 }, + { 34, 5, 6, 3, 63, 1000 }, + { 35, 5, 6, 3, 63, 1000 }, + { 36, 5, 6, 3, 63, 1000 }, + { 37, 5, 6, 3, 63, 1000 }, + { 38, 5, 6, 3, 63, 975 }, + { 39, 3, 12, 3, 63, 950 }, + { 40, 3, 12, 3, 63, 925 }, + { 41, 3, 12, 3, 63, 900 }, + { 42, 3, 12, 3, 63, 875 }, + { 43, 3, 12, 3, 63, 850 }, + { 44, 3, 12, 3, 63, 850 }, + { 45, 3, 12, 3, 63, 825 }, + { 46, 3, 12, 3, 63, 800 }, + { 47, 3, 12, 3, 63, 775 }, + { 48, 3, 12, 3, 63, 775 }, + { 49, 3, 12, 3, 63, 750 }, + { 50, 3, 12, 3, 63, 750 }, + { 51, 3, 2, 3, 63, 725 }, + { 52, 3, 2, 3, 63, 700 }, + { 53, 3, 2, 3, 63, 700 }, + { 54, 3, 2, 3, 63, 675 }, + { 55, 3, 2, 3, 63, 675 }, + { 56, 3, 2, 3, 63, 650 }, + { 57, 3, 2, 3, 63, 650 }, + { 58, 3, 2, 3, 63, 625 }, + { 59, 3, 2, 3, 63, 625 }, + { 60, 3, 2, 3, 63, 625 }, + { 61, 3, 2, 3, 63, 600 }, + { 62, 3, 2, 3, 63, 600 }, + { 63, 3, 2, 3, 63, 600 }, + { 64, 3, 2, 3, 63, 600 }, + { 65, 3, 2, 3, 63, 600 }, + { 66, 3, 2, 3, 63, 600 }, + { 67, 3, 2, 3, 63, 600 }, + { 68, 3, 2, 3, 63, 600 }, + { 69, 3, 2, 3, 63, 600 }, + { 70, 3, 2, 3, 63, 600 }, + { 71, 3, 2, 3, 63, 600 }, + { 72, 3, 2, 3, 63, 600 }, + { 73, 3, 2, 3, 63, 600 }, + { 74, 3, 2, 3, 63, 600 }, + { 75, 3, 2, 3, 63, 600 }, + { 76, 3, 2, 3, 63, 600 }, + { 77, 3, 2, 3, 63, 600 }, + { 78, 3, 2, 3, 63, 600 }, + { 79, 3, 2, 3, 63, 600 }, + { 80, 3, 2, 3, 63, 600 }, + { 81, 3, 2, 3, 63, 600 }, + { 82, 3, 2, 3, 63, 600 }, + { 83, 4, 2, 3, 63, 600 }, + { 84, 4, 2, 3, 63, 600 }, + { 85, 4, 2, 3, 63, 600 }, + { 86, 4, 2, 3, 63, 600 }, + { 87, 4, 2, 3, 63, 600 }, + { 88, 4, 2, 3, 63, 600 }, + { 89, 4, 2, 3, 63, 600 }, + { 90, 4, 2, 3, 63, 600 }, + { 91, 4, 2, 3, 63, 600 }, + { 92, 4, 2, 3, 63, 600 }, + { 93, 4, 2, 3, 63, 600 }, + { 94, 4, 2, 3, 63, 600 }, + { 95, 4, 2, 3, 63, 600 }, + { 96, 4, 2, 3, 63, 600 }, + { 97, 4, 2, 3, 63, 600 }, + { 98, 4, 2, 3, 63, 600 }, + { 99, 4, 2, 3, 63, 600 }, + { 100, 4, 2, 3, 63, 600 }, + { 101, 4, 2, 3, 63, 600 }, + { 102, 4, 2, 3, 63, 600 }, + { 103, 5, 2, 3, 63, 600 }, + { 104, 5, 2, 3, 63, 600 }, + { 105, 5, 2, 3, 63, 600 }, + { 106, 5, 2, 3, 63, 600 }, + { 107, 3, 4, 3, 63, 600 }, + { 108, 3, 4, 3, 63, 600 }, + { 109, 3, 4, 3, 63, 600 }, + { 110, 3, 4, 3, 63, 600 }, + { 111, 3, 4, 3, 63, 600 }, + { 112, 3, 4, 3, 63, 600 }, + { 113, 3, 4, 3, 63, 600 }, + { 114, 3, 4, 3, 63, 600 }, + { 115, 3, 4, 3, 63, 600 }, + { 116, 3, 4, 3, 63, 600 }, + { 117, 3, 4, 3, 63, 600 }, + { 118, 3, 4, 3, 63, 600 }, + { 119, 3, 4, 3, 63, 600 }, + { 120, 3, 4, 3, 63, 600 }, + { 121, 3, 4, 3, 63, 600 }, + { 122, 3, 4, 3, 63, 600 }, + { 123, 3, 4, 3, 63, 600 }, + { 124, 3, 4, 3, 63, 600 }, + { 125, 3, 4, 3, 63, 600 }, +}; + +/** + * xvcu_read - Read from the VCU register space + * @iomem: vcu reg space base address + * @offset: vcu reg offset from base + * + * Return: Returns 32bit value from VCU register specified + * + */ +static inline u32 xvcu_read(void __iomem *iomem, u32 offset) +{ + return ioread32(iomem + offset); +} + +/** + * xvcu_write - Write to the VCU register space + * @iomem: vcu reg space base address + * @offset: vcu reg offset from base + * @value: Value to write + */ +static inline void xvcu_write(void __iomem *iomem, u32 offset, u32 value) +{ + iowrite32(value, iomem + offset); +} + +/** + * xvcu_write_field_reg - Write to the vcu reg field + * @iomem: vcu reg space base address + * @offset: vcu reg offset from base + * @field: vcu reg field to write to + * @mask: vcu reg mask + * @shift: vcu reg number of bits to shift the bitfield + */ +static void xvcu_write_field_reg(void __iomem *iomem, int offset, + u32 field, u32 mask, int shift) +{ + u32 val = xvcu_read(iomem, offset); + + val &= ~(mask << shift); + val |= (field & mask) << shift; + + xvcu_write(iomem, offset, val); +} + +/** + * xvcu_set_vcu_pll_info - Set the VCU PLL info + * @xvcu: Pointer to the xvcu_device structure + * + * Programming the VCU PLL based on the user configuration + * (ref clock freq, core clock freq, mcu clock freq). + * Core clock frequency has higher priority than mcu clock frequency + * Errors in following cases + * - When mcu or clock clock get from logicoreIP is 0 + * - When VCU PLL DIV related bits value other than 1 + * - When proper data not found for given data + * - When sis570_1 clocksource related operation failed + * + * Return: Returns status, either success or error+reason + */ +static int xvcu_set_vcu_pll_info(struct xvcu_device *xvcu) +{ + u32 refclk, coreclk, mcuclk, inte, deci; + u32 divisor_mcu, divisor_core, fvco; + u32 clkoutdiv, vcu_pll_ctrl, pll_clk; + u32 cfg_val, mod, ctrl; + int ret, i; + const struct xvcu_pll_cfg *found = NULL; + + inte = xvcu_read(xvcu->logicore_reg_ba, VCU_PLL_CLK); + deci = xvcu_read(xvcu->logicore_reg_ba, VCU_PLL_CLK_DEC); + coreclk = xvcu_read(xvcu->logicore_reg_ba, VCU_CORE_CLK) * MHZ; + mcuclk = xvcu_read(xvcu->logicore_reg_ba, VCU_MCU_CLK) * MHZ; + if (!mcuclk || !coreclk) { + dev_err(xvcu->dev, "Invalid mcu and core clock data\n"); + return -EINVAL; + } + + refclk = (inte * MHZ) + (deci * (MHZ / FRAC)); + dev_dbg(xvcu->dev, "Ref clock from logicoreIP is %uHz\n", refclk); + dev_dbg(xvcu->dev, "Core clock from logicoreIP is %uHz\n", coreclk); + dev_dbg(xvcu->dev, "Mcu clock from logicoreIP is %uHz\n", mcuclk); + + clk_disable_unprepare(xvcu->pll_ref); + ret = clk_set_rate(xvcu->pll_ref, refclk); + if (ret) + dev_warn(xvcu->dev, "failed to set logicoreIP refclk rate\n"); + + ret = clk_prepare_enable(xvcu->pll_ref); + if (ret) { + dev_err(xvcu->dev, "failed to enable pll_ref clock source\n"); + return ret; + } + + refclk = clk_get_rate(xvcu->pll_ref); + + /* + * The divide-by-2 should be always enabled (==1) + * to meet the timing in the design. + * Otherwise, it's an error + */ + vcu_pll_ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_PLL_CTRL); + clkoutdiv = vcu_pll_ctrl >> VCU_PLL_CTRL_CLKOUTDIV_SHIFT; + clkoutdiv = clkoutdiv & VCU_PLL_CTRL_CLKOUTDIV_MASK; + if (clkoutdiv != 1) { + dev_err(xvcu->dev, "clkoutdiv value is invalid\n"); + return -EINVAL; + } + + for (i = ARRAY_SIZE(xvcu_pll_cfg) - 1; i >= 0; i--) { + const struct xvcu_pll_cfg *cfg = &xvcu_pll_cfg[i]; + + fvco = cfg->fbdiv * refclk; + if (fvco >= FVCO_MIN && fvco <= FVCO_MAX) { + pll_clk = fvco / VCU_PLL_DIV2; + if (fvco % VCU_PLL_DIV2 != 0) + pll_clk++; + mod = pll_clk % coreclk; + if (mod < LIMIT) { + divisor_core = pll_clk / coreclk; + } else if (coreclk - mod < LIMIT) { + divisor_core = pll_clk / coreclk; + divisor_core++; + } else { + continue; + } + if (divisor_core >= DIVISOR_MIN && + divisor_core <= DIVISOR_MAX) { + found = cfg; + divisor_mcu = pll_clk / mcuclk; + mod = pll_clk % mcuclk; + if (mcuclk - mod < LIMIT) + divisor_mcu++; + break; + } + } + } + + if (!found) { + dev_err(xvcu->dev, "Invalid clock combination.\n"); + return -EINVAL; + } + + xvcu->coreclk = pll_clk / divisor_core; + mcuclk = pll_clk / divisor_mcu; + dev_dbg(xvcu->dev, "Actual Ref clock freq is %uHz\n", refclk); + dev_dbg(xvcu->dev, "Actual Core clock freq is %uHz\n", xvcu->coreclk); + dev_dbg(xvcu->dev, "Actual Mcu clock freq is %uHz\n", mcuclk); + + vcu_pll_ctrl &= ~(VCU_PLL_CTRL_FBDIV_MASK << VCU_PLL_CTRL_FBDIV_SHIFT); + vcu_pll_ctrl |= (found->fbdiv & VCU_PLL_CTRL_FBDIV_MASK) << + VCU_PLL_CTRL_FBDIV_SHIFT; + vcu_pll_ctrl &= ~(VCU_PLL_CTRL_POR_IN_MASK << + VCU_PLL_CTRL_POR_IN_SHIFT); + vcu_pll_ctrl |= (VCU_PLL_CTRL_DEFAULT & VCU_PLL_CTRL_POR_IN_MASK) << + VCU_PLL_CTRL_POR_IN_SHIFT; + vcu_pll_ctrl &= ~(VCU_PLL_CTRL_PWR_POR_MASK << + VCU_PLL_CTRL_PWR_POR_SHIFT); + vcu_pll_ctrl |= (VCU_PLL_CTRL_DEFAULT & VCU_PLL_CTRL_PWR_POR_MASK) << + VCU_PLL_CTRL_PWR_POR_SHIFT; + xvcu_write(xvcu->vcu_slcr_ba, VCU_PLL_CTRL, vcu_pll_ctrl); + + /* Set divisor for the core and mcu clock */ + ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_ENC_CORE_CTRL); + ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT); + ctrl |= (divisor_core & VCU_PLL_DIVISOR_MASK) << + VCU_PLL_DIVISOR_SHIFT; + ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT); + ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT; + xvcu_write(xvcu->vcu_slcr_ba, VCU_ENC_CORE_CTRL, ctrl); + + ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_DEC_CORE_CTRL); + ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT); + ctrl |= (divisor_core & VCU_PLL_DIVISOR_MASK) << + VCU_PLL_DIVISOR_SHIFT; + ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT); + ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT; + xvcu_write(xvcu->vcu_slcr_ba, VCU_DEC_CORE_CTRL, ctrl); + + ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_ENC_MCU_CTRL); + ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT); + ctrl |= (divisor_mcu & VCU_PLL_DIVISOR_MASK) << VCU_PLL_DIVISOR_SHIFT; + ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT); + ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT; + xvcu_write(xvcu->vcu_slcr_ba, VCU_ENC_MCU_CTRL, ctrl); + + ctrl = xvcu_read(xvcu->vcu_slcr_ba, VCU_DEC_MCU_CTRL); + ctrl &= ~(VCU_PLL_DIVISOR_MASK << VCU_PLL_DIVISOR_SHIFT); + ctrl |= (divisor_mcu & VCU_PLL_DIVISOR_MASK) << VCU_PLL_DIVISOR_SHIFT; + ctrl &= ~(VCU_SRCSEL_MASK << VCU_SRCSEL_SHIFT); + ctrl |= (VCU_SRCSEL_PLL & VCU_SRCSEL_MASK) << VCU_SRCSEL_SHIFT; + xvcu_write(xvcu->vcu_slcr_ba, VCU_DEC_MCU_CTRL, ctrl); + + /* Set RES, CP, LFHF, LOCK_CNT and LOCK_DLY cfg values */ + cfg_val = (found->res << VCU_PLL_CFG_RES_SHIFT) | + (found->cp << VCU_PLL_CFG_CP_SHIFT) | + (found->lfhf << VCU_PLL_CFG_LFHF_SHIFT) | + (found->lock_cnt << VCU_PLL_CFG_LOCK_CNT_SHIFT) | + (found->lock_dly << VCU_PLL_CFG_LOCK_DLY_SHIFT); + xvcu_write(xvcu->vcu_slcr_ba, VCU_PLL_CFG, cfg_val); + + return 0; +} + +/** + * xvcu_set_pll - PLL init sequence + * @xvcu: Pointer to the xvcu_device structure + * + * Call the api to set the PLL info and once that is done then + * init the PLL sequence to make the PLL stable. + * + * Return: Returns status, either success or error+reason + */ +static int xvcu_set_pll(struct xvcu_device *xvcu) +{ + u32 lock_status; + unsigned long timeout; + int ret; + + ret = xvcu_set_vcu_pll_info(xvcu); + if (ret) { + dev_err(xvcu->dev, "failed to set pll info\n"); + return ret; + } + + xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL, + 1, VCU_PLL_CTRL_BYPASS_MASK, + VCU_PLL_CTRL_BYPASS_SHIFT); + xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL, + 1, VCU_PLL_CTRL_RESET_MASK, + VCU_PLL_CTRL_RESET_SHIFT); + xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL, + 0, VCU_PLL_CTRL_RESET_MASK, + VCU_PLL_CTRL_RESET_SHIFT); + /* + * Defined the timeout for the max time to wait the + * PLL_STATUS to be locked. + */ + timeout = jiffies + msecs_to_jiffies(2000); + do { + lock_status = xvcu_read(xvcu->vcu_slcr_ba, VCU_PLL_STATUS); + if (lock_status & VCU_PLL_STATUS_LOCK_STATUS_MASK) { + xvcu_write_field_reg(xvcu->vcu_slcr_ba, VCU_PLL_CTRL, + 0, VCU_PLL_CTRL_BYPASS_MASK, + VCU_PLL_CTRL_BYPASS_SHIFT); + return 0; + } + } while (!time_after(jiffies, timeout)); + + /* PLL is not locked even after the timeout of the 2sec */ + dev_err(xvcu->dev, "PLL is not locked\n"); + return -ETIMEDOUT; +} + +/** + * xvcu_probe - Probe existence of the logicoreIP + * and initialize PLL + * + * @pdev: Pointer to the platform_device structure + * + * Return: Returns 0 on success + * Negative error code otherwise + */ +static int xvcu_probe(struct platform_device *pdev) +{ + struct resource *res; + struct xvcu_device *xvcu; + int ret; + + xvcu = devm_kzalloc(&pdev->dev, sizeof(*xvcu), GFP_KERNEL); + if (!xvcu) + return -ENOMEM; + + xvcu->dev = &pdev->dev; + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "vcu_slcr"); + if (!res) { + dev_err(&pdev->dev, "get vcu_slcr memory resource failed.\n"); + return -ENODEV; + } + + xvcu->vcu_slcr_ba = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!xvcu->vcu_slcr_ba) { + dev_err(&pdev->dev, "vcu_slcr register mapping failed.\n"); + return -ENOMEM; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "logicore"); + if (!res) { + dev_err(&pdev->dev, "get logicore memory resource failed.\n"); + return -ENODEV; + } + + xvcu->logicore_reg_ba = devm_ioremap_nocache(&pdev->dev, res->start, + resource_size(res)); + if (!xvcu->logicore_reg_ba) { + dev_err(&pdev->dev, "logicore register mapping failed.\n"); + return -ENOMEM; + } + + xvcu->aclk = devm_clk_get(&pdev->dev, "aclk"); + if (IS_ERR(xvcu->aclk)) { + dev_err(&pdev->dev, "Could not get aclk clock\n"); + return PTR_ERR(xvcu->aclk); + } + + xvcu->pll_ref = devm_clk_get(&pdev->dev, "pll_ref"); + if (IS_ERR(xvcu->pll_ref)) { + dev_err(&pdev->dev, "Could not get pll_ref clock\n"); + return PTR_ERR(xvcu->pll_ref); + } + + ret = clk_prepare_enable(xvcu->aclk); + if (ret) { + dev_err(&pdev->dev, "aclk clock enable failed\n"); + return ret; + } + + ret = clk_prepare_enable(xvcu->pll_ref); + if (ret) { + dev_err(&pdev->dev, "pll_ref clock enable failed\n"); + goto error_aclk; + } + + /* + * Do the Gasket isolation and put the VCU out of reset + * Bit 0 : Gasket isolation + * Bit 1 : put VCU out of reset + */ + xvcu_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, VCU_GASKET_VALUE); + + /* Do the PLL Settings based on the ref clk,core and mcu clk freq */ + ret = xvcu_set_pll(xvcu); + if (ret) { + dev_err(&pdev->dev, "Failed to set the pll\n"); + goto error_pll_ref; + } + + dev_set_drvdata(&pdev->dev, xvcu); + + dev_info(&pdev->dev, "%s: Probed successfully\n", __func__); + + return 0; + +error_pll_ref: + clk_disable_unprepare(xvcu->pll_ref); +error_aclk: + clk_disable_unprepare(xvcu->aclk); + return ret; +} + +/** + * xvcu_remove - Insert gasket isolation + * and disable the clock + * @pdev: Pointer to the platform_device structure + * + * Return: Returns 0 on success + * Negative error code otherwise + */ +static int xvcu_remove(struct platform_device *pdev) +{ + struct xvcu_device *xvcu; + + xvcu = platform_get_drvdata(pdev); + if (!xvcu) + return -ENODEV; + + /* Add the the Gasket isolation and put the VCU in reset. */ + xvcu_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, 0); + + clk_disable_unprepare(xvcu->pll_ref); + clk_disable_unprepare(xvcu->aclk); + + return 0; +} + +static const struct of_device_id xvcu_of_id_table[] = { + { .compatible = "xlnx,vcu" }, + { .compatible = "xlnx,vcu-logicoreip-1.0" }, + { } +}; +MODULE_DEVICE_TABLE(of, xvcu_of_id_table); + +static struct platform_driver xvcu_driver = { + .driver = { + .name = "xilinx-vcu", + .of_match_table = xvcu_of_id_table, + }, + .probe = xvcu_probe, + .remove = xvcu_remove, +}; + +module_platform_driver(xvcu_driver); + +MODULE_AUTHOR("Dhaval Shah <dshah@xilinx.com>"); +MODULE_DESCRIPTION("Xilinx VCU init Driver"); +MODULE_LICENSE("GPL v2"); |