diff options
Diffstat (limited to 'lib/mpi/mpih-div.c')
| -rw-r--r-- | lib/mpi/mpih-div.c | 236 |
1 files changed, 236 insertions, 0 deletions
diff --git a/lib/mpi/mpih-div.c b/lib/mpi/mpih-div.c new file mode 100644 index 000000000..c57d1d462 --- /dev/null +++ b/lib/mpi/mpih-div.c @@ -0,0 +1,236 @@ +/* mpihelp-div.c - MPI helper functions + * Copyright (C) 1994, 1996 Free Software Foundation, Inc. + * Copyright (C) 1998, 1999 Free Software Foundation, Inc. + * + * This file is part of GnuPG. + * + * GnuPG is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * GnuPG is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA + * + * Note: This code is heavily based on the GNU MP Library. + * Actually it's the same code with only minor changes in the + * way the data is stored; this is to support the abstraction + * of an optional secure memory allocation which may be used + * to avoid revealing of sensitive data due to paging etc. + * The GNU MP Library itself is published under the LGPL; + * however I decided to publish this code under the plain GPL. + */ + +#include "mpi-internal.h" +#include "longlong.h" + +#ifndef UMUL_TIME +#define UMUL_TIME 1 +#endif +#ifndef UDIV_TIME +#define UDIV_TIME UMUL_TIME +#endif + +/* Divide num (NP/NSIZE) by den (DP/DSIZE) and write + * the NSIZE-DSIZE least significant quotient limbs at QP + * and the DSIZE long remainder at NP. If QEXTRA_LIMBS is + * non-zero, generate that many fraction bits and append them after the + * other quotient limbs. + * Return the most significant limb of the quotient, this is always 0 or 1. + * + * Preconditions: + * 0. NSIZE >= DSIZE. + * 1. The most significant bit of the divisor must be set. + * 2. QP must either not overlap with the input operands at all, or + * QP + DSIZE >= NP must hold true. (This means that it's + * possible to put the quotient in the high part of NUM, right after the + * remainder in NUM. + * 3. NSIZE >= DSIZE, even if QEXTRA_LIMBS is non-zero. + */ + +mpi_limb_t +mpihelp_divrem(mpi_ptr_t qp, mpi_size_t qextra_limbs, + mpi_ptr_t np, mpi_size_t nsize, mpi_ptr_t dp, mpi_size_t dsize) +{ + mpi_limb_t most_significant_q_limb = 0; + + switch (dsize) { + case 0: + /* We are asked to divide by zero, so go ahead and do it! (To make + the compiler not remove this statement, return the value.) */ + /* + * existing clients of this function have been modified + * not to call it with dsize == 0, so this should not happen + */ + return 1 / dsize; + + case 1: + { + mpi_size_t i; + mpi_limb_t n1; + mpi_limb_t d; + + d = dp[0]; + n1 = np[nsize - 1]; + + if (n1 >= d) { + n1 -= d; + most_significant_q_limb = 1; + } + + qp += qextra_limbs; + for (i = nsize - 2; i >= 0; i--) + udiv_qrnnd(qp[i], n1, n1, np[i], d); + qp -= qextra_limbs; + + for (i = qextra_limbs - 1; i >= 0; i--) + udiv_qrnnd(qp[i], n1, n1, 0, d); + + np[0] = n1; + } + break; + + case 2: + { + mpi_size_t i; + mpi_limb_t n1, n0, n2; + mpi_limb_t d1, d0; + + np += nsize - 2; + d1 = dp[1]; + d0 = dp[0]; + n1 = np[1]; + n0 = np[0]; + + if (n1 >= d1 && (n1 > d1 || n0 >= d0)) { + sub_ddmmss(n1, n0, n1, n0, d1, d0); + most_significant_q_limb = 1; + } + + for (i = qextra_limbs + nsize - 2 - 1; i >= 0; i--) { + mpi_limb_t q; + mpi_limb_t r; + + if (i >= qextra_limbs) + np--; + else + np[0] = 0; + + if (n1 == d1) { + /* Q should be either 111..111 or 111..110. Need special + * treatment of this rare case as normal division would + * give overflow. */ + q = ~(mpi_limb_t) 0; + + r = n0 + d1; + if (r < d1) { /* Carry in the addition? */ + add_ssaaaa(n1, n0, r - d0, + np[0], 0, d0); + qp[i] = q; + continue; + } + n1 = d0 - (d0 != 0 ? 1 : 0); + n0 = -d0; + } else { + udiv_qrnnd(q, r, n1, n0, d1); + umul_ppmm(n1, n0, d0, q); + } + + n2 = np[0]; +q_test: + if (n1 > r || (n1 == r && n0 > n2)) { + /* The estimated Q was too large. */ + q--; + sub_ddmmss(n1, n0, n1, n0, 0, d0); + r += d1; + if (r >= d1) /* If not carry, test Q again. */ + goto q_test; + } + + qp[i] = q; + sub_ddmmss(n1, n0, r, n2, n1, n0); + } + np[1] = n1; + np[0] = n0; + } + break; + + default: + { + mpi_size_t i; + mpi_limb_t dX, d1, n0; + + np += nsize - dsize; + dX = dp[dsize - 1]; + d1 = dp[dsize - 2]; + n0 = np[dsize - 1]; + + if (n0 >= dX) { + if (n0 > dX + || mpihelp_cmp(np, dp, dsize - 1) >= 0) { + mpihelp_sub_n(np, np, dp, dsize); + n0 = np[dsize - 1]; + most_significant_q_limb = 1; + } + } + + for (i = qextra_limbs + nsize - dsize - 1; i >= 0; i--) { + mpi_limb_t q; + mpi_limb_t n1, n2; + mpi_limb_t cy_limb; + + if (i >= qextra_limbs) { + np--; + n2 = np[dsize]; + } else { + n2 = np[dsize - 1]; + MPN_COPY_DECR(np + 1, np, dsize - 1); + np[0] = 0; + } + + if (n0 == dX) { + /* This might over-estimate q, but it's probably not worth + * the extra code here to find out. */ + q = ~(mpi_limb_t) 0; + } else { + mpi_limb_t r; + + udiv_qrnnd(q, r, n0, np[dsize - 1], dX); + umul_ppmm(n1, n0, d1, q); + + while (n1 > r + || (n1 == r + && n0 > np[dsize - 2])) { + q--; + r += dX; + if (r < dX) /* I.e. "carry in previous addition?" */ + break; + n1 -= n0 < d1; + n0 -= d1; + } + } + + /* Possible optimization: We already have (q * n0) and (1 * n1) + * after the calculation of q. Taking advantage of that, we + * could make this loop make two iterations less. */ + cy_limb = mpihelp_submul_1(np, dp, dsize, q); + + if (n2 != cy_limb) { + mpihelp_add_n(np, np, dp, dsize); + q--; + } + + qp[i] = q; + n0 = np[dsize - 1]; + } + } + } + + return most_significant_q_limb; +} |