diff options
Diffstat (limited to 'sound/soc/intel/boards/cht_bsw_rt5672.c')
-rw-r--r-- | sound/soc/intel/boards/cht_bsw_rt5672.c | 457 |
1 files changed, 457 insertions, 0 deletions
diff --git a/sound/soc/intel/boards/cht_bsw_rt5672.c b/sound/soc/intel/boards/cht_bsw_rt5672.c new file mode 100644 index 000000000..e5aa13058 --- /dev/null +++ b/sound/soc/intel/boards/cht_bsw_rt5672.c @@ -0,0 +1,457 @@ +/* + * cht_bsw_rt5672.c - ASoc Machine driver for Intel Cherryview-based platforms + * Cherrytrail and Braswell, with RT5672 codec. + * + * Copyright (C) 2014 Intel Corp + * Author: Subhransu S. Prusty <subhransu.s.prusty@intel.com> + * Mengdong Lin <mengdong.lin@intel.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/clk.h> +#include <sound/pcm.h> +#include <sound/pcm_params.h> +#include <sound/soc.h> +#include <sound/jack.h> +#include <sound/soc-acpi.h> +#include "../../codecs/rt5670.h" +#include "../atom/sst-atom-controls.h" + + +/* The platform clock #3 outputs 19.2Mhz clock to codec as I2S MCLK */ +#define CHT_PLAT_CLK_3_HZ 19200000 +#define CHT_CODEC_DAI "rt5670-aif1" + +struct cht_mc_private { + struct snd_soc_jack headset; + char codec_name[SND_ACPI_I2C_ID_LEN]; + struct clk *mclk; +}; + +/* Headset jack detection DAPM pins */ +static struct snd_soc_jack_pin cht_bsw_headset_pins[] = { + { + .pin = "Headset Mic", + .mask = SND_JACK_MICROPHONE, + }, + { + .pin = "Headphone", + .mask = SND_JACK_HEADPHONE, + }, +}; + +static int platform_clock_control(struct snd_soc_dapm_widget *w, + struct snd_kcontrol *k, int event) +{ + struct snd_soc_dapm_context *dapm = w->dapm; + struct snd_soc_card *card = dapm->card; + struct snd_soc_dai *codec_dai; + struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); + int ret; + + codec_dai = snd_soc_card_get_codec_dai(card, CHT_CODEC_DAI); + if (!codec_dai) { + dev_err(card->dev, "Codec dai not found; Unable to set platform clock\n"); + return -EIO; + } + + if (SND_SOC_DAPM_EVENT_ON(event)) { + if (ctx->mclk) { + ret = clk_prepare_enable(ctx->mclk); + if (ret < 0) { + dev_err(card->dev, + "could not configure MCLK state"); + return ret; + } + } + + /* set codec PLL source to the 19.2MHz platform clock (MCLK) */ + ret = snd_soc_dai_set_pll(codec_dai, 0, RT5670_PLL1_S_MCLK, + CHT_PLAT_CLK_3_HZ, 48000 * 512); + if (ret < 0) { + dev_err(card->dev, "can't set codec pll: %d\n", ret); + return ret; + } + + /* set codec sysclk source to PLL */ + ret = snd_soc_dai_set_sysclk(codec_dai, RT5670_SCLK_S_PLL1, + 48000 * 512, SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(card->dev, "can't set codec sysclk: %d\n", ret); + return ret; + } + } else { + /* Set codec sysclk source to its internal clock because codec + * PLL will be off when idle and MCLK will also be off by ACPI + * when codec is runtime suspended. Codec needs clock for jack + * detection and button press. + */ + snd_soc_dai_set_sysclk(codec_dai, RT5670_SCLK_S_RCCLK, + 48000 * 512, SND_SOC_CLOCK_IN); + + if (ctx->mclk) + clk_disable_unprepare(ctx->mclk); + } + return 0; +} + +static const struct snd_soc_dapm_widget cht_dapm_widgets[] = { + SND_SOC_DAPM_HP("Headphone", NULL), + SND_SOC_DAPM_MIC("Headset Mic", NULL), + SND_SOC_DAPM_MIC("Int Mic", NULL), + SND_SOC_DAPM_SPK("Ext Spk", NULL), + SND_SOC_DAPM_SUPPLY("Platform Clock", SND_SOC_NOPM, 0, 0, + platform_clock_control, SND_SOC_DAPM_PRE_PMU | + SND_SOC_DAPM_POST_PMD), +}; + +static const struct snd_soc_dapm_route cht_audio_map[] = { + {"IN1P", NULL, "Headset Mic"}, + {"IN1N", NULL, "Headset Mic"}, + {"DMIC L1", NULL, "Int Mic"}, + {"DMIC R1", NULL, "Int Mic"}, + {"Headphone", NULL, "HPOL"}, + {"Headphone", NULL, "HPOR"}, + {"Ext Spk", NULL, "SPOLP"}, + {"Ext Spk", NULL, "SPOLN"}, + {"Ext Spk", NULL, "SPORP"}, + {"Ext Spk", NULL, "SPORN"}, + {"AIF1 Playback", NULL, "ssp2 Tx"}, + {"ssp2 Tx", NULL, "codec_out0"}, + {"ssp2 Tx", NULL, "codec_out1"}, + {"codec_in0", NULL, "ssp2 Rx"}, + {"codec_in1", NULL, "ssp2 Rx"}, + {"ssp2 Rx", NULL, "AIF1 Capture"}, + {"Headphone", NULL, "Platform Clock"}, + {"Headset Mic", NULL, "Platform Clock"}, + {"Int Mic", NULL, "Platform Clock"}, + {"Ext Spk", NULL, "Platform Clock"}, +}; + +static const struct snd_kcontrol_new cht_mc_controls[] = { + SOC_DAPM_PIN_SWITCH("Headphone"), + SOC_DAPM_PIN_SWITCH("Headset Mic"), + SOC_DAPM_PIN_SWITCH("Int Mic"), + SOC_DAPM_PIN_SWITCH("Ext Spk"), +}; + +static int cht_aif1_hw_params(struct snd_pcm_substream *substream, + struct snd_pcm_hw_params *params) +{ + struct snd_soc_pcm_runtime *rtd = substream->private_data; + struct snd_soc_dai *codec_dai = rtd->codec_dai; + int ret; + + /* set codec PLL source to the 19.2MHz platform clock (MCLK) */ + ret = snd_soc_dai_set_pll(codec_dai, 0, RT5670_PLL1_S_MCLK, + CHT_PLAT_CLK_3_HZ, params_rate(params) * 512); + if (ret < 0) { + dev_err(rtd->dev, "can't set codec pll: %d\n", ret); + return ret; + } + + /* set codec sysclk source to PLL */ + ret = snd_soc_dai_set_sysclk(codec_dai, RT5670_SCLK_S_PLL1, + params_rate(params) * 512, + SND_SOC_CLOCK_IN); + if (ret < 0) { + dev_err(rtd->dev, "can't set codec sysclk: %d\n", ret); + return ret; + } + return 0; +} + +static const struct acpi_gpio_params headset_gpios = { 0, 0, false }; + +static const struct acpi_gpio_mapping cht_rt5672_gpios[] = { + { "headset-gpios", &headset_gpios, 1 }, + {}, +}; + +static int cht_codec_init(struct snd_soc_pcm_runtime *runtime) +{ + int ret; + struct snd_soc_dai *codec_dai = runtime->codec_dai; + struct snd_soc_component *component = codec_dai->component; + struct cht_mc_private *ctx = snd_soc_card_get_drvdata(runtime->card); + + if (devm_acpi_dev_add_driver_gpios(component->dev, cht_rt5672_gpios)) + dev_warn(runtime->dev, "Unable to add GPIO mapping table\n"); + + /* Select codec ASRC clock source to track I2S1 clock, because codec + * is in slave mode and 100fs I2S format (BCLK = 100 * LRCLK) cannot + * be supported by RT5672. Otherwise, ASRC will be disabled and cause + * noise. + */ + rt5670_sel_asrc_clk_src(component, + RT5670_DA_STEREO_FILTER + | RT5670_DA_MONO_L_FILTER + | RT5670_DA_MONO_R_FILTER + | RT5670_AD_STEREO_FILTER + | RT5670_AD_MONO_L_FILTER + | RT5670_AD_MONO_R_FILTER, + RT5670_CLK_SEL_I2S1_ASRC); + + ret = snd_soc_card_jack_new(runtime->card, "Headset", + SND_JACK_HEADSET | SND_JACK_BTN_0 | + SND_JACK_BTN_1 | SND_JACK_BTN_2, + &ctx->headset, + cht_bsw_headset_pins, + ARRAY_SIZE(cht_bsw_headset_pins)); + if (ret) + return ret; + + rt5670_set_jack_detect(component, &ctx->headset); + if (ctx->mclk) { + /* + * The firmware might enable the clock at + * boot (this information may or may not + * be reflected in the enable clock register). + * To change the rate we must disable the clock + * first to cover these cases. Due to common + * clock framework restrictions that do not allow + * to disable a clock that has not been enabled, + * we need to enable the clock first. + */ + ret = clk_prepare_enable(ctx->mclk); + if (!ret) + clk_disable_unprepare(ctx->mclk); + + ret = clk_set_rate(ctx->mclk, CHT_PLAT_CLK_3_HZ); + + if (ret) { + dev_err(runtime->dev, "unable to set MCLK rate\n"); + return ret; + } + } + return 0; +} + +static int cht_codec_fixup(struct snd_soc_pcm_runtime *rtd, + struct snd_pcm_hw_params *params) +{ + struct snd_interval *rate = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_RATE); + struct snd_interval *channels = hw_param_interval(params, + SNDRV_PCM_HW_PARAM_CHANNELS); + int ret; + + /* The DSP will covert the FE rate to 48k, stereo, 24bits */ + rate->min = rate->max = 48000; + channels->min = channels->max = 2; + + /* set SSP2 to 24-bit */ + params_set_format(params, SNDRV_PCM_FORMAT_S24_LE); + + /* + * Default mode for SSP configuration is TDM 4 slot + */ + ret = snd_soc_dai_set_fmt(rtd->codec_dai, + SND_SOC_DAIFMT_DSP_B | + SND_SOC_DAIFMT_IB_NF | + SND_SOC_DAIFMT_CBS_CFS); + if (ret < 0) { + dev_err(rtd->dev, "can't set format to TDM %d\n", ret); + return ret; + } + + /* TDM 4 slots 24 bit, set Rx & Tx bitmask to 4 active slots */ + ret = snd_soc_dai_set_tdm_slot(rtd->codec_dai, 0xF, 0xF, 4, 24); + if (ret < 0) { + dev_err(rtd->dev, "can't set codec TDM slot %d\n", ret); + return ret; + } + + return 0; +} + +static int cht_aif1_startup(struct snd_pcm_substream *substream) +{ + return snd_pcm_hw_constraint_single(substream->runtime, + SNDRV_PCM_HW_PARAM_RATE, 48000); +} + +static const struct snd_soc_ops cht_aif1_ops = { + .startup = cht_aif1_startup, +}; + +static const struct snd_soc_ops cht_be_ssp2_ops = { + .hw_params = cht_aif1_hw_params, +}; + +static struct snd_soc_dai_link cht_dailink[] = { + /* Front End DAI links */ + [MERR_DPCM_AUDIO] = { + .name = "Audio Port", + .stream_name = "Audio", + .cpu_dai_name = "media-cpu-dai", + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .platform_name = "sst-mfld-platform", + .nonatomic = true, + .dynamic = 1, + .dpcm_playback = 1, + .dpcm_capture = 1, + .ops = &cht_aif1_ops, + }, + [MERR_DPCM_DEEP_BUFFER] = { + .name = "Deep-Buffer Audio Port", + .stream_name = "Deep-Buffer Audio", + .cpu_dai_name = "deepbuffer-cpu-dai", + .codec_dai_name = "snd-soc-dummy-dai", + .codec_name = "snd-soc-dummy", + .platform_name = "sst-mfld-platform", + .nonatomic = true, + .dynamic = 1, + .dpcm_playback = 1, + .ops = &cht_aif1_ops, + }, + + /* Back End DAI links */ + { + /* SSP2 - Codec */ + .name = "SSP2-Codec", + .id = 0, + .cpu_dai_name = "ssp2-port", + .platform_name = "sst-mfld-platform", + .no_pcm = 1, + .nonatomic = true, + .codec_dai_name = "rt5670-aif1", + .codec_name = "i2c-10EC5670:00", + .init = cht_codec_init, + .be_hw_params_fixup = cht_codec_fixup, + .dpcm_playback = 1, + .dpcm_capture = 1, + .ops = &cht_be_ssp2_ops, + }, +}; + +static int cht_suspend_pre(struct snd_soc_card *card) +{ + struct snd_soc_component *component; + struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); + + list_for_each_entry(component, &card->component_dev_list, card_list) { + if (!strncmp(component->name, + ctx->codec_name, sizeof(ctx->codec_name))) { + + dev_dbg(component->dev, "disabling jack detect before going to suspend.\n"); + rt5670_jack_suspend(component); + break; + } + } + return 0; +} + +static int cht_resume_post(struct snd_soc_card *card) +{ + struct snd_soc_component *component; + struct cht_mc_private *ctx = snd_soc_card_get_drvdata(card); + + list_for_each_entry(component, &card->component_dev_list, card_list) { + if (!strncmp(component->name, + ctx->codec_name, sizeof(ctx->codec_name))) { + + dev_dbg(component->dev, "enabling jack detect for resume.\n"); + rt5670_jack_resume(component); + break; + } + } + + return 0; +} + +/* SoC card */ +static struct snd_soc_card snd_soc_card_cht = { + .name = "cht-bsw-rt5672", + .owner = THIS_MODULE, + .dai_link = cht_dailink, + .num_links = ARRAY_SIZE(cht_dailink), + .dapm_widgets = cht_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(cht_dapm_widgets), + .dapm_routes = cht_audio_map, + .num_dapm_routes = ARRAY_SIZE(cht_audio_map), + .controls = cht_mc_controls, + .num_controls = ARRAY_SIZE(cht_mc_controls), + .suspend_pre = cht_suspend_pre, + .resume_post = cht_resume_post, +}; + +#define RT5672_I2C_DEFAULT "i2c-10EC5670:00" + +static int snd_cht_mc_probe(struct platform_device *pdev) +{ + int ret_val = 0; + struct cht_mc_private *drv; + struct snd_soc_acpi_mach *mach = pdev->dev.platform_data; + const char *i2c_name; + int i; + + drv = devm_kzalloc(&pdev->dev, sizeof(*drv), GFP_ATOMIC); + if (!drv) + return -ENOMEM; + + strcpy(drv->codec_name, RT5672_I2C_DEFAULT); + + /* fixup codec name based on HID */ + if (mach) { + i2c_name = acpi_dev_get_first_match_name(mach->id, NULL, -1); + if (i2c_name) { + snprintf(drv->codec_name, sizeof(drv->codec_name), + "i2c-%s", i2c_name); + for (i = 0; i < ARRAY_SIZE(cht_dailink); i++) { + if (!strcmp(cht_dailink[i].codec_name, + RT5672_I2C_DEFAULT)) { + cht_dailink[i].codec_name = + drv->codec_name; + break; + } + } + } + } + + drv->mclk = devm_clk_get(&pdev->dev, "pmc_plt_clk_3"); + if (IS_ERR(drv->mclk)) { + dev_err(&pdev->dev, + "Failed to get MCLK from pmc_plt_clk_3: %ld\n", + PTR_ERR(drv->mclk)); + return PTR_ERR(drv->mclk); + } + snd_soc_card_set_drvdata(&snd_soc_card_cht, drv); + + /* register the soc card */ + snd_soc_card_cht.dev = &pdev->dev; + ret_val = devm_snd_soc_register_card(&pdev->dev, &snd_soc_card_cht); + if (ret_val) { + dev_err(&pdev->dev, + "snd_soc_register_card failed %d\n", ret_val); + return ret_val; + } + platform_set_drvdata(pdev, &snd_soc_card_cht); + return ret_val; +} + +static struct platform_driver snd_cht_mc_driver = { + .driver = { + .name = "cht-bsw-rt5672", + }, + .probe = snd_cht_mc_probe, +}; + +module_platform_driver(snd_cht_mc_driver); + +MODULE_DESCRIPTION("ASoC Intel(R) Baytrail CR Machine driver"); +MODULE_AUTHOR("Subhransu S. Prusty, Mengdong Lin"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:cht-bsw-rt5672"); |