blob: 2aa06ac0fac594ae48b85041fd1c3aed21f674ba (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
|
Generic ARM big LITTLE cpufreq driver's DT glue
-----------------------------------------------
This is DT specific glue layer for generic cpufreq driver for big LITTLE
systems.
Both required and optional properties listed below must be defined
under node /cpus/cpu@x. Where x is the first cpu inside a cluster.
FIXME: Cpus should boot in the order specified in DT and all cpus for a cluster
must be present contiguously. Generic DT driver will check only node 'x' for
cpu:x.
Required properties:
- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt
for details
Optional properties:
- clock-latency: Specify the possible maximum transition latency for clock,
in unit of nanoseconds.
Examples:
cpus {
#address-cells = <1>;
#size-cells = <0>;
cpu@0 {
compatible = "arm,cortex-a15";
reg = <0>;
next-level-cache = <&L2>;
operating-points = <
/* kHz uV */
792000 1100000
396000 950000
198000 850000
>;
clock-latency = <61036>; /* two CLK32 periods */
};
cpu@1 {
compatible = "arm,cortex-a15";
reg = <1>;
next-level-cache = <&L2>;
};
cpu@100 {
compatible = "arm,cortex-a7";
reg = <100>;
next-level-cache = <&L2>;
operating-points = <
/* kHz uV */
792000 950000
396000 750000
198000 450000
>;
clock-latency = <61036>; /* two CLK32 periods */
};
cpu@101 {
compatible = "arm,cortex-a7";
reg = <101>;
next-level-cache = <&L2>;
};
};
|
