blob: f9525f6e3d43337599af0ee8000a29663332641a (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
|
Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers
http://www.analog.com/en/products/mems/accelerometers/adxl345.html
http://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
Required properties:
- compatible : should be one of
"adi,adxl345"
"adi,adxl375"
- reg : the I2C address or SPI chip select number of the sensor
Required properties for SPI bus usage:
- spi-max-frequency : set maximum clock frequency, must be 5000000
- spi-cpol and spi-cpha : must be defined for adxl345 to enable SPI mode 3
Optional properties:
- interrupts: interrupt mapping for IRQ as documented in
Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
Example for a I2C device node:
accelerometer@2a {
compatible = "adi,adxl345";
reg = <0x53>;
interrupt-parent = <&gpio1>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
};
Example for a SPI device node:
accelerometer@0 {
compatible = "adi,adxl345";
reg = <0>;
spi-max-frequency = <5000000>;
spi-cpol;
spi-cpha;
interrupt-parent = <&gpio1>;
interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
};
|
