Adding upstream version 2.8.9rel.1.upstream/2.8.9rel.1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 491 insertions, 0 deletions

diff --git a/makefile.in b/makefile.in
new file mode 100644
index 0000000..f39b495
--- /dev/null
+++ b/makefile.in
@@ -0,0 +1,491 @@
+# $LynxId: makefile.in,v 1.173 2018/07/08 10:56:19 tom Exp $
+##makefile for lynx
+
+SHELL		= @CONFIG_SHELL@
+CDPATH		= .
+
+.SUFFIXES:
+@SET_MAKE@
+prefix		= @prefix@
+exec_prefix	= @exec_prefix@
+top_srcdir	= @top_srcdir@
+srcdir		= @srcdir@
+builddir	= .
+VPATH		= $(srcdir)
+
+CC		= @CC@
+CFLAGS		= @CFLAGS@
+DEFS		= @DEFS@
+CPPFLAGS	= @CPPFLAGS@
+LINT		= @LINT@
+ETAGS		= @ETAGS@
+
+BUILD_CC	= @BUILD_CC@
+BUILD_CPP	= @BUILD_CPP@
+BUILD_CFLAGS	= @BUILD_CFLAGS@
+BUILD_CPPFLAGS	= @BUILD_CPPFLAGS@ @DEFS@
+BUILD_EXEEXT	= @BUILD_EXEEXT@
+BUILD_LDFLAGS	= @BUILD_LDFLAGS@
+BUILD_LIBS	= @BUILD_LIBS@
+
+x		= @EXEEXT@
+o		= .@OBJEXT@
+
+LDFLAGS		= @EXTRA_LDFLAGS@ @LDFLAGS@
+LIBS		= @LIBS@
+
+INSTALL		= @INSTALL@
+INSTALL_PROGRAM	= @INSTALL_PROGRAM@
+INSTALL_DATA	= @INSTALL_DATA@
+
+LN_S		= @LN_S@
+
+TAR		= @TAR@
+TAR_UP		= $(TAR) @TAR_UP_OPTIONS@ @TAR_PIPE_OPTIONS@
+TAR_DOWN	= $(TAR) @TAR_DOWN_OPTIONS@ @TAR_PIPE_OPTIONS@
+
+# $Format: "LYNX_VERSION	= $ProjectVersion$"$
+LYNX_VERSION	= 2.8.9rel.1
+
+## This is the version which we are developing (or, upon release, make this
+## the same).  Use no dots in the name, since it must work on VMS and MS-DOS.
+VERSION		= 2-8-9
+
+##this is the name of the directory the lynx source code is in.
+##(e.g., lynx2-8-9, not the full path)
+lynxdir= lynx$(VERSION)
+lynxname= lynx$(VERSION)
+
+## The 'DESTDIR' variable allows you to install the program into a different
+## location, e.g., for packaging, without affecting the compiled-in pathnames.
+DESTDIR= @DESTDIR@
+
+## Where you want lynx installed
+bindir= @bindir@
+BINDIR= $(DESTDIR)$(bindir)
+
+## Where you want the lynx man file installed
+mandir= @mandir@/man1
+MANDIR= $(DESTDIR)$(mandir)
+
+## Where you want the lynx.cfg file installed
+sysconfdir= @sysconfdir@
+SYSCONFDIR= $(DESTDIR)$(sysconfdir)
+
+## Where you want the doc-files installed
+datarootdir= @datarootdir@
+docdir    = @datadir@/lynx_doc
+DOCDIR    = $(DESTDIR)$(docdir)
+
+## Where you want the help-files installed
+helpdir   = @datadir@/lynx_help
+HELPDIR   = $(DESTDIR)$(helpdir)
+
+##set the relative location of the WWW library Implementation directory,
+##from this directory
+##do not set this to be an absolute path!!!
+WWW_DIR   = $(builddir)/WWW/Library/Implementation
+
+##set the relative location of the message-file directory
+##do not set this to be an absolute path!!!
+PO_DIR    = $(builddir)/po
+PO_SRCDIR = $(srcdir)/po
+
+##set the relative location of the main source-directory
+##do not set this to be an absolute path!!!
+SRC_DIR   = $(builddir)/src
+
+##set the relative location of the character-translation data directory
+##do not set this to be an absolute path!!!
+CHR_DIR   = $(SRC_DIR)/chrtrans
+
+## Path to gzip that will compress the help files.
+## It will be used when --enable-gzip-help is set by configure.
+## Leave *both* empty if you don't want to gzip help files.
+COMPRESS_PROG=@COMPRESS_PROG@
+COMPRESS_EXT=@COMPRESS_EXT@
+
+# Path of scripts directory
+scripts_dir=$(srcdir)/scripts
+
+MAKE_RECUR = $(MAKE) @cf_cv_makeflags@ DESTDIR="$(DESTDIR)" CC="$(CC)"
+
+@LYNXCFG_MAKE@CFG2HTML = alphatoc.html body.html cattoc.html
+
+# !!!!!!!!!!! SUN resolv LIBRARY !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+# To include resolv in the LIBS="" list for SUN 3, 4 or Solaris OS,
+# point RESOLVLIB to that library.  You need this if you get the message
+# "Alert!:  Unable to connect to remote host" whenever you try to
+# access a host other than localhost and have made Lynx without it.
+# See the PROBLEMS file for more information.
+#RESOLVLIB= -lresolv
+
+# !!!!!!!!!!!!!  DIRECT WAIS ACCESS !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
+# If you are adding direct wais access you must fill in the
+# location of wais.a, client.a and the standard math library, libm.a.
+# You can pick up the most current freeWAIS sources from
+#	ftp://ftp.cnidr.org/pub/NIDR.tools/freewais
+# If you are using freeWAIS-0.202 or older, include -DDECLARE_WAIS_LOGFILES
+# in your SITE_DEFS.
+# Please put an ABSOLUTE address here if you want it to work!
+#WAISLIB= ../../freeWAIS-0.202/bin/client.a ../../freeWAIS-0.202/bin/wais.a /usr/lib/libm.a
+
+# !!!!!!!!!!!!! SLANG Support (For color version of Lynx). !!!!!!!!!!!!!!!!
+# The slang library is an alternative to curses, developed by John E. Davis
+# (davis@space.mit.edu).  Version 0.99-27 or higher is available from
+#	ftp://space.mit.edu/pub/davis
+# It provides color support for Lynx.
+
+# !!!!!!!!!!!!! NCURSES Support (For color version of Lynx). !!!!!!!!!!!!!!
+# If you need ncurses, the latest version can always be found
+# in ftp://ftp.invisible-island.net/ncurses/
+# or ftp://ftp.gnu.org/pub/gnu/
+
+# Also be sure to check out the compilation symbols in userdefs.h
+# before building Lynx!
+
+# If you apply patches which require linking to site-specific libraries, set
+# SITE_LIBS to those libraries.
+SITE_LIBS= # Your libraries here
+
+# Set SITE_LYDEFS to one or more of the defines for the WWW Library:
+SITE_LYDEFS = # Your defines here
+
+# Set SITE_DEFS to one or more of the defines for lynx below:
+SITE_DEFS = # Your defines here
+
+# defines for which there are no configure options:
+# -DIGNORE_CTRL_C  Define if Control-C shouldn't exit lynx.
+# -DNO_RULES       Disables CERN-style access rules (see lynx.cfg).
+# -DUSE_VASPRINT   Use vasprintf() function
+#
+# if you are linking to freeWAIS-0.202 or older, you should define this
+# in SITE_DEFS
+#
+# -DDECLARE_WAIS_LOGFILES
+#
+# if you have an SVR4 system with the "type any key" problem, try defining
+# this in LYFLAGS (SITE_LYDEFS) and SITE_DEFS
+#
+# -DSVR4_BSDSELECT
+#
+# Many other defines have configure options  (see INSTALLATION, Section II-1c.):
+#
+# for installation of local execution links, please see the file userdefs.h
+
+WWW_CFLAGS = \
+	LY_CFLAGS="$(CFLAGS)" \
+	CPPFLAGS="$(CPPFLAGS)" \
+	LYFLAGS="$(SITE_LYDEFS)"
+
+CHR_CFLAGS = \
+	SITE_DEFS="$(SITE_DEFS)" \
+	BUILD_CFLAGS="$(BUILD_CFLAGS)" \
+	BUILD_CPPFLAGS="$(BUILD_CPPFLAGS)" \
+	BUILD_LDFLAGS="$(BUILD_LDFLAGS)" \
+	BUILD_LIBS="$(BUILD_LIBS)" \
+	BUILD_CC="$(BUILD_CC)"
+
+SRC_CFLAGS = \
+	CFLAGS="$(CFLAGS)" \
+	CPPFLAGS="$(CPPFLAGS)" \
+	LDFLAGS="$(LDFLAGS)" \
+	LIBS="$(LIBS) $(RESOLVLIB) $(WAISLIB) $(SITE_LIBS)" \
+	SITE_DEFS="$(SITE_DEFS)" \
+	WWWINC=$(WWW_DIR) \
+	WWWLIB="../$(WWW_DIR)/libwww.a"
+
+actual_PROG  = `echo lynx|sed '@program_transform_name@'`
+binary_PROG  = $(actual_PROG)$x
+
+all lynx$x: cfg_defs.h LYHelp.h
+@MSG_DIR_MAKE@	$(SHELL) $(scripts_dir)/fixtext.sh $(srcdir)/LYMessages_en.h >LYMessages.c
+@MSG_DIR_MAKE@	cd $(PO_DIR) && $(MAKE_RECUR)
+	cd $(WWW_DIR) && $(MAKE_RECUR) $(WWW_CFLAGS)
+	cd $(CHR_DIR) && $(MAKE_RECUR) all $(CHR_CFLAGS)
+	cd $(SRC_DIR) && $(MAKE_RECUR) all $(SRC_CFLAGS)
+
+lint:
+	cd $(WWW_DIR) && $(MAKE_RECUR) LINT="$(LINT)" $(WWW_CFLAGS) $@
+	cd $(SRC_DIR) && $(MAKE_RECUR) LINT="$(LINT)" $(SRC_CFLAGS) $@
+	cd $(CHR_DIR) && $(MAKE_RECUR) LINT="$(LINT)" $@
+
+tags:
+	cd $(WWW_DIR) && $(MAKE_RECUR) $(WWW_CFLAGS) $@
+	cd $(SRC_DIR) && $(MAKE_RECUR) $(SRC_CFLAGS) $@
+	cd $(CHR_DIR) && $(MAKE_RECUR) $@
+
+etags:
+	$(ETAGS) *.[ch] */*.[ch] */*/*.[ch] */*/*/*.[ch]
+
+help:
+	@echo
+	@echo "Please run make with one of the following arguments"
+	@echo "all        -- to make the executable, put it in this directory"
+	@echo "clean      -- removes all '$o' and 'core' files"
+	@echo "distclean  -- removes all generated files"
+	@echo "depend     -- use makedepend to generate header-dependencies"
+	@echo
+
+##Miscellaneous actions
+clean:
+	rm -f WWW/Library/*/*.[aoib]
+	rm -f WWW/Library/*/.created
+	cd $(WWW_DIR) && $(MAKE_RECUR) $@
+	cd $(SRC_DIR) && $(MAKE_RECUR) $@
+@MSG_DIR_MAKE@	rm -f LYMessages.c
+@MSG_DIR_MAKE@	cd $(PO_DIR) && $(MAKE_RECUR) $@
+	rm -f *.b $(SRC_DIR)/lynx$x *.leaks cfg_defs.h LYHelp.h lint.*
+@LYNXCFG_MAKE@	-rm -f $(CFG2HTML)
+	rm -f help_files.sed
+	rm -f core *.core
+
+depend: cfg_defs.h LYHelp.h
+	cd $(WWW_DIR) && $(MAKE_RECUR) $@
+	cd $(SRC_DIR) && $(MAKE_RECUR) $@
+
+distclean: clean
+	-rm -f WWW/Library/*/*~
+	-rm -f WWW/Library/*/*.bak
+	-rm -rf $(SRC_DIR)/obsolete
+	-cd $(WWW_DIR) && $(MAKE_RECUR) $@
+	-cd $(SRC_DIR) && $(MAKE_RECUR) $@
+	-cd $(CHR_DIR) && $(MAKE_RECUR) $@
+@MSG_DIR_MAKE@	cd $(PO_DIR) && $(MAKE_RECUR) $@
+@MSG_DIR_MAKE@	-rmdir $(PO_DIR)
+	-rm -f *~ *.bak *.sav tags TAGS
+	-rm -f $(WWW_DIR)/makefile $(SRC_DIR)/makefile $(CHR_DIR)/makefile
+@SRCDIR_CLEAN@	-rmdir $(WWW_DIR) && rmdir WWW/Library && rmdir WWW
+@SRCDIR_CLEAN@	-rmdir $(CHR_DIR) && rmdir $(SRC_DIR)
+	-rm -f makefile lynx_cfg.h config.status config.log config.cache
+	-rm -f lynx$x
+
+maintainer-clean: distclean
+	-find . -type f -name '*.rej' -exec rm -f {} \;
+	-find . -type f -name '*.orig' -exec rm -f {} \;
+	-rm -rf WWW/Library/*/obsolete
+	-rm -f Lynx.prj .*_aux
+
+# Directory containing reference source for patch generation,
+#     either absolute or relative to $(top_srcdir)/..
+REFDIR=orig/$(lynxdir)
+
+lynx.patch: $(top_srcdir) $(top_srcdir)/CHANGES
+	- cd $(top_srcdir)/.. && cd $(REFDIR) && { rm -f \
+		config.log \
+		config.status \
+		lynx_cfg.h \
+			; \
+		for I in . $(SRC_DIR) $(WWW_DIR); do ( set +e; \
+			( set -x; cd $$I && rm -f *.orig *.rej makefile ); : ); \
+		done; }
+	( cd $(top_srcdir)/..; echo "%%% Created `date` by target $@. %%%"; \
+	   if diff -bru /dev/null /dev/null;		     \
+		   then diff -bru $(REFDIR) $(lynxdir);	     \
+		   else diff -brc $(REFDIR) $(lynxdir); fi ) \
+		| grep -v '^Common' \
+		| grep -v '^Binary files ' \
+		| grep -v '^Only ' | tee $@ | egrep '^\-\-\- .*$(lynxdir)'
+
+install: install-bin install-man install-cfg @INSTALL_LSS@
+	@echo
+	@echo "Use $(MAKE) install-help to install the help-files"
+	@echo "Use $(MAKE) install-doc to install extra documentation files"
+	@echo
+
+install-full: install install-help install-doc
+	@echo Full installation complete.
+
+install-bin: $(BINDIR) lynx$x
+@MSG_DIR_MAKE@	cd $(PO_DIR) && $(MAKE_RECUR) install
+	@ECHO_CC@$(SHELL) -c "P=$(binary_PROG); \
+	if test -f $(BINDIR)/$$P ; then \
+	      mv -f $(BINDIR)/$$P $(BINDIR)/$$P.old; fi"
+	$(INSTALL_PROGRAM) lynx$x $(BINDIR)/$(binary_PROG)
+
+install-man : $(MANDIR)
+	$(INSTALL_DATA) $(srcdir)/lynx.man $(MANDIR)/$(actual_PROG).1
+
+install-doc : $(DOCDIR) $(HELPDIR)
+	@echo Copying sample files
+	$(SHELL) -c '\
+		( umask 022; \
+		  cd $(srcdir) && \
+		  $(TAR_UP) C[HO]* PROBLEMS README docs samples test ) | \
+		( umask 022; \
+		  cd $(DOCDIR) && \
+		  chmod -R u+w . && $(TAR_DOWN) )'
+	$(SHELL) -c 'if test "$(COMPRESS_PROG)" != "" ; then \
+		(cd $(DOCDIR) && $(COMPRESS_PROG) -f docs/CHANGES*.[0-9] docs/*.announce ) \
+	fi'
+	$(SHELL) -c 'for name in COPYING COPYHEADER; do \
+		cd $(HELPDIR) && rm -f $$name ;\
+		r= ;\
+		test "$(LN_S)" = "ln -s" || r=`echo $(helpdir)|sed -e "s%[^/]\+%..%g" -e "s%^.%%"`; \
+		cd $(HELPDIR) && ( $(LN_S) $$r$(docdir)/$$name . || cp $(DOCDIR)/$$name . );\
+		done'
+	-$(SHELL) -c 'case `id|sed -e "s/(.*//"` in uid=0) chown -R root $(DOCDIR);; esac'
+
+# HPUX 'sed' does not seem to like '=' as pattern delimiter.
+# We cannot use '%' because it may appear in a URL.
+# Andrew filesystem uses '@'.
+# So we limit sed delimiters to '!' and '%', depending on the expected text.
+FIX_SED = tr '=' '"'
+
+LYNX_URL='@HOMEPAGE_URL@release/breakout'
+LYNXDOCS_URL='$(LYNX_URL)/docs/'
+LYNXHELP_URL='$(LYNX_URL)/lynx_help/'
+
+@LYNXCFG_MAKE@$(CFG2HTML) :
+@LYNXCFG_MAKE@	@echo 'Making htmlized lynx.cfg'
+@LYNXCFG_MAKE@	cd $(SRC_DIR) && $(MAKE_RECUR) LYReadCFG.i
+@LYNXCFG_MAKE@	@-rm -f $(CFG2HTML)
+@LYNXCFG_MAKE@	sed -n -e '/Config_Type  *Config_Table/,/{0, *0, *0}/ p' $(SRC_DIR)/LYReadCFG.i | \
+@LYNXCFG_MAKE@	sed  -e 's/ *{ *"\([^"]*\)".*/\1/' | \
+@LYNXCFG_MAKE@	perl $(scripts_dir)/cfg2html.pl -ams $(srcdir)/lynx.cfg
+@LYNXCFG_MAKE@	-rm -f $(SRC_DIR)/LYReadCFG.i
+
+help_files.sed : makefile $(srcdir)/lynx_help/help_files.txt
+	@echo Constructing sed-script $@
+	@-rm -f $@ help_files.tmp
+	@cat $(srcdir)/lynx_help/help_files.txt > help_files.tmp
+@LYNXDOC_MAKE@	@ECHO_CC@echo 's!$(LYNXDOCS_URL)!file://$(docdir)/!g' >> help_files.tmp
+@LYNXCFG_MAKE@	@ECHO_CC@echo 's!$(LYNXHELP_URL)alphatoc.html!alphatoc.html!g' >> help_files.tmp
+@LYNXCFG_MAKE@	@ECHO_CC@echo 's!$(LYNXHELP_URL)cattoc.html!cattoc.html!g' >> help_files.tmp
+@LYNXCFG_MAKE@	@ECHO_CC@echo 's!alphatoc\.html!alphatoc.html$(COMPRESS_EXT)!g' >> help_files.tmp
+@LYNXCFG_MAKE@	@ECHO_CC@echo 's!cattoc\.html!cattoc.html$(COMPRESS_EXT)!g' >> help_files.tmp
+@LYNXCFG_MAKE@	@ECHO_CC@echo 's!body\.html!body.html$(COMPRESS_EXT)!g' >> help_files.tmp
+	@ECHO_CC@sed	-e '/^#/d' -e '/^$$/d' \
+		-e 's%\(.*\)=\(.*\@.*\)$$%s=@\1@=\2=g%' \
+		-e 's%\(.*\)=\(http:.*\)$$%s=@\1@=\2=g%' \
+		-e 's%\(.*\)=\(ftp:.*\)$$%s=@\1@=\2=g%' \
+		-e 's%\(.*\)=\(.*\.html\)$$%s=@\1@=\2$(COMPRESS_EXT)=g%' \
+		help_files.tmp | $(FIX_SED) > $@
+	@echo Appending interim-fix for existing html files to $@
+	@ECHO_CC@sed	-e '/^#/d' -e '/[:@]/d' -e '/^$$/d' \
+		-e 's%\(.*\)=\(.*\.html\)$$%s=\2=\2$(COMPRESS_EXT)=g%' \
+		-e 's%\.html=%\\.html=%' \
+		help_files.tmp | $(FIX_SED) >> $@
+	@ECHO_CC@if test -n "$(COMPRESS_EXT)"; then echo "s%\\(\$(COMPRESS_EXT)\\)*\$(COMPRESS_EXT)%$(COMPRESS_EXT)%g" >> $@; fi
+	@-rm -f help_files.tmp
+
+install-help : $(CFG2HTML) help_files.sed $(HELPDIR) $(SYSCONFDIR)
+	-$(SHELL) -c 'if cd "$(HELPDIR)" ; then \
+		WD=`pwd` ; \
+		TAIL=`basename "$(helpdir)"` ; \
+		HEAD=`echo "$$WD"|sed -e "s,/$${TAIL}$$,,"` ; \
+		test "x$$WD" != "x$$HEAD" && rm -fr * ; \
+		fi'
+	test -d $(HELPDIR)/keystrokes || mkdir $(HELPDIR)/keystrokes
+	@echo Translating/copying html files
+@LYNXCFG_MAKE@	@$(SHELL) -c 'for f in $(CFG2HTML) ; do \
+@LYNXCFG_MAKE@		sed -f help_files.sed $$f > $(HELPDIR)/$$f ; \
+@LYNXCFG_MAKE@		done'
+	@ECHO_CC@$(SHELL) -c 'sed_prog=`pwd`/help_files.sed && \
+		cd $(srcdir)/lynx_help && \
+		dirs=keystrokes && \
+		files="*.html */*.html" && \
+		for f in $$files ; do \
+			sed -f $$sed_prog $$f > $(HELPDIR)/$$f ; \
+		done && \
+		if test "$(COMPRESS_PROG)" != "" ; then \
+			(cd $(HELPDIR) && $(COMPRESS_PROG) $$files ) \
+		fi'
+	@echo Updating $(sysconfdir)/lynx.cfg
+	@ECHO_CC@$(SHELL) -c \
+	'if test -f $(SYSCONFDIR)/lynx.cfg ; then \
+		mv $(SYSCONFDIR)/lynx.cfg $(SYSCONFDIR)/lynx.tmp ; \
+	else \
+		cp $(srcdir)/lynx.cfg $(SYSCONFDIR)/lynx.tmp ; \
+	fi'
+	@echo Updating $(sysconfdir)/lynx.cfg to point to installed help-files
+	@ECHO_CC@sed	-e '/^HELPFILE:http/s!^!#!' \
+		-e '/^#HELPFILE:file/s!#!!' \
+		$(SYSCONFDIR)/lynx.tmp | \
+	$(SHELL) $(scripts_dir)/cfg_path.sh lynx_help $(helpdir) | \
+	$(SHELL) $(scripts_dir)/cfg_path.sh lynx_doc  $(helpdir) | \
+	sed	-e '/^HELPFILE:file/s!$$!$(COMPRESS_EXT)!' \
+		-e '/^HELPFILE:file/s!$(COMPRESS_EXT)$(COMPRESS_EXT)$$!$(COMPRESS_EXT)!' \
+		>$(SYSCONFDIR)/lynx.cfg
+	chmod 644 $(SYSCONFDIR)/lynx.cfg
+	-rm -f $(SYSCONFDIR)/lynx.tmp
+
+LYHelp.h : help_files.sed $(srcdir)/LYHelp.hin
+	@echo Creating $@
+	@sed -f help_files.sed $(srcdir)/LYHelp.hin > $@
+	@echo '**********************************************'
+	@echo
+	@$(SHELL) -c 'if test "$(COMPRESS_PROG)" = "" ; then \
+		echo "       Help files will NOT be gzipped."; \
+	else \
+		echo "       Help links point to compressed files"; \
+		echo "       To access them properly you have to type"; \
+		echo "                 make install-help"; \
+	fi'
+	@echo
+	@echo '**********************************************'
+
+cfg_defs.h : $(scripts_dir)/cfg_defs.sh $(scripts_dir)/cfg_edit.sh config.cache lynx_cfg.h
+	@rm -f $@
+	$(SHELL) -c 'SHELL=$(SHELL) $(SHELL) $(scripts_dir)/cfg_defs.sh $(srcdir)'
+
+install-cfg : $(SYSCONFDIR)
+	@$(SHELL) $(scripts_dir)/install-cfg.sh "$(INSTALL_DATA)" $(srcdir)/lynx.cfg $(SYSCONFDIR)/lynx.cfg
+
+install-lss : $(SYSCONFDIR)
+	@$(SHELL) $(scripts_dir)/install-lss.sh "$(INSTALL_DATA)" $(srcdir)/samples/lynx.lss $(SYSCONFDIR)/lynx.lss
+
+uninstall ::
+@MSG_DIR_MAKE@	cd $(PO_DIR) && $(MAKE_RECUR) uninstall
+	-rm -f $(BINDIR)/$(binary_PROG)
+	-rm -f $(MANDIR)/$(actual_PROG).1
+	-rm -f $(SYSCONFDIR)/lynx.cfg
+	-rm -f $(SYSCONFDIR)/lynx.lss
+
+uninstall \
+uninstall-help ::
+	-$(SHELL) -c 'if test -d "$(HELPDIR)" ; then \
+		WD=`cd "$(HELPDIR)" && pwd` ; \
+		TAIL=`basename "$(helpdir)"` ; \
+		HEAD=`echo "$$WD"|sed -e "s,/$${TAIL}$$,,"` ; \
+		test "x$$WD" != "x$$HEAD" && rm -rf "$(HELPDIR)"; \
+		fi'
+
+uninstall \
+uninstall-doc ::
+	-$(SHELL) -c 'if test -d "$(DOCDIR)" ; then \
+		WD=`cd "$(DOCDIR)" && pwd` ; \
+		TAIL=`basename "$(docdir)"` ; \
+		HEAD=`echo "$$WD"|sed -e "s,/$${TAIL}$$,,"` ; \
+		test "x$$WD" != "x$$HEAD" && rm -rf "$(DOCDIR)"; \
+		fi'
+	-$(SHELL) -c 'if test -d "$(HELPDIR)" ; then \
+		WD=`cd "$(HELPDIR)" && pwd` ; \
+		TAIL=`basename "$(helpdir)"` ; \
+		HEAD=`echo "$$WD"|sed -e "s,/'$${TAIL}'$$,,"` ; \
+		test "x$$WD" != "x$$HEAD" ; \
+		cd "$(HELPDIR)" && rm -f COPYING COPYHEADER ; \
+		fi'
+
+update-po:
+	rsync -Lrtvz  translationproject.org::tp/latest/lynx/  $(PO_SRCDIR)
+	test -f $(PO_SRCDIR)/makefile && cd $(PO_SRCDIR) && $(MAKE_RECUR) $@
+
+preinstall :
+	@ echo ''
+	@ echo '** Configuration summary for LYNX $(LYNX_VERSION):'
+	@ echo ''
+	@ echo '       program name: '$(actual_PROG)
+	@ echo ''
+	@ echo '      bin directory: '$(BINDIR)
+	@ echo '   config directory: '$(SYSCONFDIR)
+	@ echo '      man directory: '$(MANDIR)
+	@ echo '     help directory: '$(HELPDIR)
+	@ echo '      doc directory: '$(DOCDIR)
+
+$(BINDIR) \
+$(MANDIR) \
+$(SYSCONFDIR) \
+$(HELPDIR) \
+$(DOCDIR) :
+	mkdir -p $@