diff options
Diffstat (limited to 'tests/data/regressions/its4448')
-rwxr-xr-x | tests/data/regressions/its4448/its4448 | 326 | ||||
-rw-r--r-- | tests/data/regressions/its4448/slapd-meta.conf | 61 |
2 files changed, 387 insertions, 0 deletions
diff --git a/tests/data/regressions/its4448/its4448 b/tests/data/regressions/its4448/its4448 new file mode 100755 index 0000000..538f16c --- /dev/null +++ b/tests/data/regressions/its4448/its4448 @@ -0,0 +1,326 @@ +#! /bin/sh +# $OpenLDAP$ +## This work is part of OpenLDAP Software <http://www.openldap.org/>. +## +## Copyright 1998-2018 The OpenLDAP Foundation. +## All rights reserved. +## +## Redistribution and use in source and binary forms, with or without +## modification, are permitted only as authorized by the OpenLDAP +## Public License. +## +## A copy of this license is available in the file LICENSE in the +## top-level directory of the distribution or, alternatively, at +## <http://www.OpenLDAP.org/license.html>. + +echo "running defines.sh" +. $SRCDIR/scripts/defines.sh + +echo "" + +if test $BACKMETA = metano ; then + echo "meta backend not available, test skipped" + exit 0 +fi + +# to be removed some time... +if test "x$TEST_META" = "xno" ; then + echo '### Test disabled by "TEST_META=no"; unset TEST_META to re-enable' + echo "" + exit 0 +else + echo "### this test is experimental; in case of problems," + echo "### set \"TEST_META=no\" to disable, and report thru" + echo "### the Issue Tracking System <http://www.openldap.org/its/>" + echo "" +fi + +if test x$TESTLOOPS = x ; then + TESTLOOPS=50 +fi + +rm -rf $TESTDIR + +mkdir -p $TESTDIR $DBDIR1 $DBDIR2 + +ITS=4448 +ITSDIR=$DATADIR/regressions/its$ITS +ITSCONF=$ITSDIR/slapd-meta.conf + +# NOTE: this could be added to all tests... +if test "$BACKEND" = "bdb" || test "$BACKEND" = "hdb" ; then + if test "x$DB_CONFIG" != "x" ; then \ + if test -f $DB_CONFIG ; then + echo "==> using DB_CONFIG \"$DB_CONFIG\"" + cp $DB_CONFIG $DBDIR1 + cp $DB_CONFIG $DBDIR2 + else + echo "==> DB_CONFIG must point to a valid file (ignored)" + fi + else + echo "==> set \"DB_CONFIG\" to the DB_CONFIG file you want to use for the test." + fi + echo "" +fi + +echo "Starting slapd on TCP/IP port $PORT1..." +. $CONFFILTER $BACKEND $MONITORDB < $CONF > $CONF1 +$SLAPD -f $CONF1 -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 & +PID=$! +if test $WAIT != 0 ; then + echo PID $PID + read foo +fi +KILLPIDS="$PID" + +sleep 1 + +echo "Using ldapsearch to check that slapd is running..." +for i in 0 1 2 3 4 5; do + $LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT1 \ + 'objectclass=*' > /dev/null 2>&1 + RC=$? + if test $RC = 0 ; then + break + fi + echo "Waiting 5 seconds for slapd to start..." + sleep 5 +done +if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Using ldapadd to populate the database..." +$LDAPADD -D "$MANAGERDN" -h $LOCALHOST -p $PORT1 -w $PASSWD < \ + $LDIFORDERED > $TESTOUT 2>&1 +RC=$? +if test $RC != 0 ; then + echo "ldapadd failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Using ldapadd to add the referral..." +$LDAPADD -D "$MANAGERDN" -h $LOCALHOST -p $PORT1 -w $PASSWD << EOMODS \ + > $TESTOUT 2>&1 +dn: cn=Meta,dc=example,dc=com +objectClass: referral +objectClass: extensibleObject +cn: Meta +ref: ${URI2}ou=Meta,dc=example,dc=com +EOMODS + +RC=$? +if test $RC != 0 ; then + echo "ldapadd failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Starting slapd on TCP/IP port $PORT2..." +. $CONFFILTER $BACKEND $MONITORDB < $METACONF2 > $CONF2 +$SLAPD -f $CONF2 -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 & +PID=$! +if test $WAIT != 0 ; then + echo PID $PID + read foo +fi +KILLPIDS="$KILLPIDS $PID" + +sleep 1 + +echo "Using ldapsearch to check that slapd is running..." +for i in 0 1 2 3 4 5; do + $LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT2 \ + 'objectclass=*' > /dev/null 2>&1 + RC=$? + if test $RC = 0 ; then + break + fi + echo "Waiting 5 seconds for slapd to start..." + sleep 5 +done +if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Using ldapadd to populate the database..." +$LDAPADD -D "$METAMANAGERDN" -h $LOCALHOST -p $PORT2 -w $PASSWD < \ + $LDIFMETA >> $TESTOUT 2>&1 +RC=$? +if test $RC != 0 ; then + echo "ldapadd failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Starting slapd on TCP/IP port $PORT3..." +. $CONFFILTER $BACKEND $MONITORDB < $ITSCONF > $CONF3 +$SLAPD -f $CONF3 -h $URI3 -d $LVL $TIMING > $LOG3 2>&1 & +PID=$! +if test $WAIT != 0 ; then + echo PID $PID + read foo +fi +KILLPIDS="$KILLPIDS $PID" + +sleep 1 + +echo "Using ldapsearch to check that slapd is running..." +for i in 0 1 2 3 4 5; do + $LDAPSEARCH -s base -b "$MONITOR" -h $LOCALHOST -p $PORT3 \ + 'objectclass=*' > /dev/null 2>&1 + RC=$? + if test $RC = 0 ; then + break + fi + echo "Waiting 5 seconds for slapd to start..." + sleep 5 +done +if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +cat /dev/null > $SEARCHOUT + +mkdir -p $TESTDIR/$DATADIR +METABASEDN="o=Example,c=US" +#for f in $DATADIR/do_* ; do +# sed -e "s;$BASEDN;$METABASEDN;" $f > $TESTDIR/$f +#done + +# add a read that matches only the local database, but selects +# also the remote as candidate; this should be removed to compare +# execution times with test008... +#for f in $TESTDIR/$DATADIR/do_read.* ; do +# echo "ou=Meta,$METABASEDN" >> $f +#done + +# add a read that matches a referral in the local database only, +# but selects also the remote as candidate; this should be removed +# to compare execution times with test008... +#for f in $TESTDIR/$DATADIR/do_read.* ; do +# echo "cn=Somewhere,ou=Meta,$METABASEDN" >> $f +#done + +# add a bind that resolves to a referral +#for f in $TESTDIR/$DATADIR/do_bind.* ; do +# echo "cn=Foo,ou=Meta,$METABASEDN" >> $f +# echo "bar" >> $f +# echo "" >> $f +# echo "" >> $f +#done + +echo \ +"$METABASEDN +(cn=John Belushi) +$METABASEDN +(cn=Meta) +$METABASEDN +(cn=Foo Bar) +$METABASEDN +(cn=Dan Aykroyd) +$METABASEDN +(cn=John Belushi) +$METABASEDN +(cn=Meta) +$METABASEDN +(cn=Foo Bar) +$METABASEDN +(cn=Dan Aykroyd) +$METABASEDN +(cn=John Belushi) +$METABASEDN +(cn=Meta) +$METABASEDN +(cn=Foo Bar) +$METABASEDN +(cn=Dan Aykroyd) +$METABASEDN +(cn=John Belushi) +$METABASEDN +(cn=Meta) +$METABASEDN +(cn=Foo Bar) +$METABASEDN +(cn=Dan Aykroyd) +$METABASEDN +(cn=John Belushi) +$METABASEDN +(cn=Meta) +$METABASEDN +(cn=Foo Bar) +$METABASEDN +(cn=Dan Aykroyd) +$METABASEDN +(cn=John Belushi) +$METABASEDN +(cn=Meta) +$METABASEDN +(cn=Foo Bar) +$METABASEDN +(cn=Dan Aykroyd) +$METABASEDN +(cn=John Belushi) +$METABASEDN +(cn=Meta) +$METABASEDN +(cn=Foo Bar) +$METABASEDN +(cn=Dan Aykroyd) +$METABASEDN +(cn=John Belushi) +$METABASEDN +(cn=Meta) +$METABASEDN +(cn=Foo Bar) +$METABASEDN +(cn=Dan Aykroyd)" \ +> $TESTDIR/$DATADIR/do_search.0 + +echo "Using tester for concurrent server access..." +$SLAPDTESTER -P "$PROGDIR" -d "$TESTDIR/$DATADIR" -h $LOCALHOST -p $PORT3 \ + -D "cn=Manager,$METABASEDN" -w $PASSWD -l $TESTLOOPS -r 20 -FF +RC=$? + +if test $RC != 0 ; then + echo "slapd-tester failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Using ldapsearch to retrieve all the entries..." +$LDAPSEARCH -S "" -b "$METABASEDN" -h $LOCALHOST -p $PORT3 \ + '(objectClass=*)' > $SEARCHOUT 2>&1 +RC=$? + +test $KILLSERVERS != no && kill -HUP $KILLPIDS + +if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + exit $RC +fi + +echo "Filtering ldapsearch results..." +$LDIFFILTER < $SEARCHOUT > $SEARCHFLT +echo "Filtering original ldif used to create database..." +$LDIFFILTER < $METACONCURRENCYOUT > $LDIFFLT +echo "Comparing filter output..." +$BCMP $SEARCHFLT $LDIFFLT > $CMPOUT + +if test $? != 0 ; then + echo "comparison failed - slapd-meta search/modification didn't succeed" + exit 1 +fi + +echo ">>>>> Test succeeded" + +test $KILLSERVERS != no && wait + +exit 0 diff --git a/tests/data/regressions/its4448/slapd-meta.conf b/tests/data/regressions/its4448/slapd-meta.conf new file mode 100644 index 0000000..ed8bc63 --- /dev/null +++ b/tests/data/regressions/its4448/slapd-meta.conf @@ -0,0 +1,61 @@ +# master slapd config -- for testing +# $OpenLDAP$ +## This work is part of OpenLDAP Software <http://www.openldap.org/>. +## +## Copyright 1998-2018 The OpenLDAP Foundation. +## All rights reserved. +## +## Redistribution and use in source and binary forms, with or without +## modification, are permitted only as authorized by the OpenLDAP +## Public License. +## +## A copy of this license is available in the file LICENSE in the +## top-level directory of the distribution or, alternatively, at +## <http://www.OpenLDAP.org/license.html>. + +include @SCHEMADIR@/core.schema +include @SCHEMADIR@/cosine.schema +include @SCHEMADIR@/inetorgperson.schema +include @SCHEMADIR@/openldap.schema +include @SCHEMADIR@/nis.schema +include @SCHEMADIR@/ppolicy.schema +pidfile @TESTDIR@/slapd.m.pid +argsfile @TESTDIR@/slapd.m.args + +#mod#modulepath ../servers/slapd/back-@BACKEND@/ +#mod#moduleload back_@BACKEND@.la +#relaymod#modulepath ../servers/slapd/back-relay/ +#relaymod#moduleload back_relay.la +#ldapmod#modulepath ../servers/slapd/back-ldap/ +#ldapmod#moduleload back_ldap.la +#metamod#modulepath ../servers/slapd/back-meta/ +#metamod#moduleload back_meta.la +#monitormod#modulepath ../servers/slapd/back-monitor/ +#monitormod#moduleload back_monitor.la +#rwmmod#modulepath ../servers/slapd/overlays/ +#rwmmod#moduleload rwm.la + +# seems to improve behavior under very heavy load +# (i.e. it alleviates load on target systems) +threads 8 + +####################################################################### +# database definitions +####################################################################### + +database meta +suffix "o=Example,c=US" +rootdn "cn=Manager,o=Example,c=US" +rootpw secret +nretries 100 +chase-referrals yes + +uri "@URI1@o=Example,c=US" +suffixmassage "o=Example,c=US" "dc=example,dc=com" +idassert-bind bindmethod=simple + binddn="cn=manager,dc=example,dc=com" + credentials=secret + mode=none +idassert-authzFrom "*" + +#monitor#database monitor |