diff options
Diffstat (limited to 'tests/scripts/test049-sync-config')
| -rwxr-xr-x | tests/scripts/test049-sync-config | 406 |
1 files changed, 406 insertions, 0 deletions
diff --git a/tests/scripts/test049-sync-config b/tests/scripts/test049-sync-config new file mode 100755 index 0000000..6a51e7a --- /dev/null +++ b/tests/scripts/test049-sync-config @@ -0,0 +1,406 @@ +#! /bin/sh +# $OpenLDAP$ +## This work is part of OpenLDAP Software <http://www.openldap.org/>. +## +## Copyright 1998-2018 The OpenLDAP Foundation. +## All rights reserved. +## +## Redistribution and use in source and binary forms, with or without +## modification, are permitted only as authorized by the OpenLDAP +## Public License. +## +## A copy of this license is available in the file LICENSE in the +## top-level directory of the distribution or, alternatively, at +## <http://www.OpenLDAP.org/license.html>. + +echo "running defines.sh" +. $SRCDIR/scripts/defines.sh + +if test $SYNCPROV = syncprovno; then + echo "Syncrepl provider overlay not available, test skipped" + exit 0 +fi + +PRODIR=$TESTDIR/pro +CONDIR=$TESTDIR/con1 +DBPRO=$PRODIR/db +DBCON=$CONDIR/db +CFPRO=$PRODIR/slapd.d +CFCON=$CONDIR/slapd.d + +mkdir -p $TESTDIR $PRODIR $CONDIR $DBPRO $DBCON $CFPRO $CFCON + +$SLAPPASSWD -g -n >$CONFIGPWF + +if test x"$SYNCMODE" = x ; then + SYNCMODE=rp +fi +case "$SYNCMODE" in + ro) + SYNCTYPE="type=refreshOnly interval=00:00:00:03" + ;; + rp) + SYNCTYPE="type=refreshAndPersist" + ;; + *) + echo "unknown sync mode $SYNCMODE" + exit 1; + ;; +esac + +# +# Test replication of dynamic config: +# - start provider +# - start consumer +# - configure over ldap +# - populate over ldap +# - configure syncrepl over ldap +# - retrieve database over ldap and compare against expected results +# + +echo "Starting provider slapd on TCP/IP port $PORT1..." +. $CONFFILTER $BACKEND $MONITORDB < $DYNAMICCONF > $CONFLDIF +$SLAPADD -F $CFPRO -n 0 -l $CONFLDIF +cd $PRODIR +$SLAPD -F ./slapd.d -h $URI1 -d $LVL $TIMING > $LOG1 2>&1 & +PID=$! +if test $WAIT != 0 ; then + echo PID $PID + read foo +fi +KILLPIDS="$PID" +cd $TESTWD + +sleep 1 + +echo "Using ldapsearch to check that provider slapd is running..." +for i in 0 1 2 3 4 5; do + $LDAPSEARCH -s base -b "" -H $URI1 \ + 'objectclass=*' > /dev/null 2>&1 + RC=$? + if test $RC = 0 ; then + break + fi + echo "Waiting 5 seconds for slapd to start..." + sleep 5 +done + +if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Inserting syncprov overlay on provider..." +if [ "$SYNCPROV" = syncprovmod ]; then + $LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF > $TESTOUT 2>&1 +dn: cn=module,cn=config +objectClass: olcModuleList +cn: module +olcModulePath: $TESTWD/../servers/slapd/overlays +olcModuleLoad: syncprov.la +EOF + RC=$? + if test $RC != 0 ; then + echo "ldapadd failed for moduleLoad ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC + fi +fi +read CONFIGPW < $CONFIGPWF +$LDAPMODIFY -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >> $TESTOUT 2>&1 +dn: olcDatabase={0}config,cn=config +changetype: modify +add: olcSyncRepl +olcSyncRepl: rid=001 provider=$URI1 binddn="cn=config" bindmethod=simple + credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist + retry="3 5 300 5" timeout=3 +- +add: olcUpdateRef +olcUpdateRef: $URI1 + +dn: olcOverlay=syncprov,olcDatabase={0}config,cn=config +changetype: add +objectClass: olcOverlayConfig +objectClass: olcSyncProvConfig +olcOverlay: syncprov +EOF +RC=$? +if test $RC != 0 ; then + echo "ldapmodify failed for syncrepl config ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Starting consumer slapd on TCP/IP port $PORT2..." +$SLAPADD -F $CFCON -n 0 -l $CONFLDIF +cd $CONDIR +$SLAPD -F ./slapd.d -h $URI2 -d $LVL $TIMING > $LOG2 2>&1 & +SLAVEPID=$! +if test $WAIT != 0 ; then + echo SLAVEPID $SLAVEPID + read foo +fi +KILLPIDS="$KILLPIDS $SLAVEPID" +cd $TESTWD + +sleep 1 + +echo "Using ldapsearch to check that consumer slapd is running..." +for i in 0 1 2 3 4 5; do + $LDAPSEARCH -s base -b "" -H $URI2 \ + 'objectclass=*' > /dev/null 2>&1 + RC=$? + if test $RC = 0 ; then + break + fi + echo "Waiting 5 seconds for slapd to start..." + sleep 5 +done + +if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Configuring syncrepl on consumer..." +$LDAPMODIFY -D cn=config -H $URI2 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1 +dn: olcDatabase={0}config,cn=config +changetype: modify +add: olcSyncRepl +olcSyncRepl: rid=001 provider=$URI1 binddn="cn=config" bindmethod=simple + credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist + retry="3 5 300 5" timeout=3 +- +add: olcUpdateRef +olcUpdateRef: $URI1 +EOF + +echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..." +sleep $SLEEP1 + +echo "Using ldapsearch to check that syncrepl received config changes..." +RC=32 +for i in 0 1 2 3 4 5; do + RESULT=`$LDAPSEARCH -H $URI2 -D cn=config -y $CONFIGPWF \ + -s base -b "olcDatabase={0}config,cn=config" \ + '(olcUpdateRef=*)' 2>&1 | awk '/^dn:/ {print "OK"}'` + if test "x$RESULT" = "xOK" ; then + RC=0 + break + fi + echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..." + sleep $SLEEP1 +done + +if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Adding schema and databases on provider..." +$LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1 +include: file://$ABS_SCHEMADIR/core.ldif + +include: file://$ABS_SCHEMADIR/cosine.ldif + +include: file://$ABS_SCHEMADIR/inetorgperson.ldif + +include: file://$ABS_SCHEMADIR/openldap.ldif + +include: file://$ABS_SCHEMADIR/nis.ldif +EOF +RC=$? +if test $RC != 0 ; then + echo "ldapadd failed for schema config ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +nullExclude="" nullOK="" +test $BACKEND = null && nullExclude="# " nullOK="OK" + +if [ "$BACKENDTYPE" = mod ]; then + $LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1 +dn: cn=module,cn=config +objectClass: olcModuleList +cn: module +olcModulePath: $TESTWD/../servers/slapd/back-$BACKEND +olcModuleLoad: back_$BACKEND.la +EOF + RC=$? + if test $RC != 0 ; then + echo "ldapadd failed for backend config ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC + fi +fi + +$LDAPADD -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1 +dn: olcDatabase={1}$BACKEND,cn=config +objectClass: olcDatabaseConfig +${nullExclude}objectClass: olc${BACKEND}Config +olcDatabase: {1}$BACKEND +olcSuffix: $BASEDN +${nullExclude}olcDbDirectory: ./db +olcRootDN: $MANAGERDN +olcRootPW: $PASSWD +olcSyncRepl: rid=002 provider=$URI1 binddn="$MANAGERDN" bindmethod=simple + credentials=$PASSWD searchbase="$BASEDN" $SYNCTYPE + retry="3 5 300 5" timeout=3 +olcUpdateRef: $URI1 + +dn: olcOverlay=syncprov,olcDatabase={1}${BACKEND},cn=config +changetype: add +objectClass: olcOverlayConfig +objectClass: olcSyncProvConfig +olcOverlay: syncprov +EOF +RC=$? +if test $RC != 0 ; then + echo "ldapadd failed for database config ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +if test $INDEXDB = indexdb ; then + $LDAPMODIFY -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >>$TESTOUT 2>&1 +dn: olcDatabase={1}$BACKEND,cn=config +changetype: modify +add: olcDbIndex +olcDbIndex: objectClass,entryUUID,entryCSN eq +olcDbIndex: cn,uid pres,eq,sub +EOF + RC=$? + if test $RC != 0 ; then + echo "ldapadd modify for database config ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC + fi +fi + +echo "Using ldapadd to populate provider..." +$LDAPADD -D "$MANAGERDN" -H $URI1 -w $PASSWD -f $LDIFORDERED \ + >> $TESTOUT 2>&1 +RC=$? +if test $RC != 0 ; then + echo "ldapadd failed for database config ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..." +sleep $SLEEP1 + +echo "Using ldapsearch to check that syncrepl received database changes..." +RC=32 +for i in 0 1 2 3 4 5; do + RESULT=`$LDAPSEARCH -H $URI2 \ + -s base -b "cn=Ursula Hampster,ou=Alumni Association,ou=People,dc=example,dc=com" \ + '(objectClass=*)' 2>&1 | awk '/^dn:/ {print "OK"}'` + if test "x$RESULT$nullOK" = "xOK" ; then + RC=0 + break + fi + echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..." + sleep $SLEEP1 +done + +if test $RC != 0 ; then + echo "ldapsearch failed ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Replacing olcSyncrepl on provider..." +$LDAPMODIFY -D cn=config -H $URI1 -y $CONFIGPWF <<EOF >> $TESTOUT 2>&1 +dn: olcDatabase={0}config,cn=config +changetype: modify +replace: olcSyncRepl +olcSyncRepl: rid=002 provider=$URI1 binddn="cn=config" bindmethod=simple + credentials=$CONFIGPW searchbase="cn=config" type=refreshAndPersist + retry="3 5 300 5" timeout=3 +EOF +echo "Waiting $SLEEP1 seconds for syncrepl to receive changes..." +sleep $SLEEP1 + +echo "Using ldapsearch to read config from the provider..." +$LDAPSEARCH -b cn=config -D cn=config -H $URI1 -y $CONFIGPWF \ + 'objectclass=*' > $MASTEROUT 2>&1 +RC=$? + +if test $RC != 0 ; then + echo "ldapsearch failed at provider ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Using ldapsearch to read config from the consumer..." +$LDAPSEARCH -b cn=config -D cn=config -H $URI2 -y $CONFIGPWF \ + 'objectclass=*' > $SLAVEOUT 2>&1 +RC=$? + +if test $RC != 0 ; then + echo "ldapsearch failed at consumer ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Filtering provider results..." +$LDIFFILTER < $MASTEROUT > $MASTERFLT +echo "Filtering consumer results..." +$LDIFFILTER < $SLAVEOUT > $SLAVEFLT + +echo "Comparing retrieved configs from provider and consumer..." +$CMP $MASTERFLT $SLAVEFLT > $CMPOUT + +if test $? != 0 ; then + echo "test failed - provider and consumer configs differ" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit 1 +fi + +echo "Using ldapsearch to read all the entries from the provider..." +$LDAPSEARCH -S "" -b "$BASEDN" -D "$MANAGERDN" -H $URI1 -w $PASSWD \ + 'objectclass=*' > $MASTEROUT 2>&1 +RC=$? + +if test $RC != 0 ; then + echo "ldapsearch failed at provider ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +echo "Using ldapsearch to read all the entries from the consumer..." +$LDAPSEARCH -S "" -b "$BASEDN" -D "$MANAGERDN" -H $URI2 -w $PASSWD \ + 'objectclass=*' > $SLAVEOUT 2>&1 +RC=$? + +if test $RC != 0 ; then + echo "ldapsearch failed at consumer ($RC)!" + test $KILLSERVERS != no && kill -HUP $KILLPIDS + exit $RC +fi + +test $KILLSERVERS != no && kill -HUP $KILLPIDS + +echo "Filtering provider results..." +$LDIFFILTER < $MASTEROUT > $MASTERFLT +echo "Filtering consumer results..." +$LDIFFILTER < $SLAVEOUT > $SLAVEFLT + +echo "Comparing retrieved entries from provider and consumer..." +$CMP $MASTERFLT $SLAVEFLT > $CMPOUT + +if test $? != 0 ; then + echo "test failed - provider and consumer databases differ" + exit 1 +fi + +echo ">>>>> Test succeeded" + +test $KILLSERVERS != no && wait + +exit 0 |