summaryrefslogtreecommitdiffstats
path: root/src/smtpstone/smtp-sink.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/smtpstone/smtp-sink.c')
-rw-r--r--src/smtpstone/smtp-sink.c1643
1 files changed, 1643 insertions, 0 deletions
diff --git a/src/smtpstone/smtp-sink.c b/src/smtpstone/smtp-sink.c
new file mode 100644
index 0000000..4378d5a
--- /dev/null
+++ b/src/smtpstone/smtp-sink.c
@@ -0,0 +1,1643 @@
+/*++
+/* NAME
+/* smtp-sink 1
+/* SUMMARY
+/* parallelized SMTP/LMTP test server
+/* SYNOPSIS
+/* .fi
+/* \fBsmtp-sink\fR [\fIoptions\fR] [\fBinet:\fR][\fIhost\fR]:\fIport\fR
+/* \fIbacklog\fR
+/*
+/* \fBsmtp-sink\fR [\fIoptions\fR] \fBunix:\fR\fIpathname\fR \fIbacklog\fR
+/* DESCRIPTION
+/* \fBsmtp-sink\fR listens on the named host (or address) and port.
+/* It takes SMTP messages from the network and throws them away.
+/* The purpose is to measure client performance, not protocol
+/* compliance.
+/*
+/* \fBsmtp-sink\fR may also be configured to capture each mail
+/* delivery transaction to file. Since disk latencies are large
+/* compared to network delays, this mode of operation can
+/* reduce the maximal performance by several orders of magnitude.
+/*
+/* Connections can be accepted on IPv4 or IPv6 endpoints, or on
+/* UNIX-domain sockets.
+/* IPv4 and IPv6 are the default.
+/* This program is the complement of the \fBsmtp-source\fR(1) program.
+/*
+/* Note: this is an unsupported test program. No attempt is made
+/* to maintain compatibility between successive versions.
+/*
+/* Arguments:
+/* .IP \fB-4\fR
+/* Support IPv4 only. This option has no effect when
+/* Postfix is built without IPv6 support.
+/* .IP \fB-6\fR
+/* Support IPv6 only. This option is not available when
+/* Postfix is built without IPv6 support.
+/* .IP \fB-8\fR
+/* Do not announce 8BITMIME support.
+/* .IP \fB-a\fR
+/* Do not announce SASL authentication support.
+/* .IP "\fB-A \fIdelay\fR"
+/* Wait \fIdelay\fR seconds after responding to DATA, then
+/* abort prematurely with a 550 reply status. Do not read
+/* further input from the client; this is an attempt to block
+/* the client before it sends ".". Specify a zero delay value
+/* to abort immediately.
+/* .IP "\fB-b \fIsoft-bounce-reply\fR"
+/* Use \fIsoft-bounce-reply\fR for soft reject responses. The
+/* default reply is "450 4.3.0 Error: command failed".
+/* .IP "\fB-B \fIhard-bounce-reply\fR"
+/* Use \fIhard-bounce-reply\fR for hard reject responses. The
+/* default reply is "500 5.3.0 Error: command failed".
+/* .IP \fB-c\fR
+/* Display running counters that are updated whenever an SMTP
+/* session ends, a QUIT command is executed, or when "." is
+/* received.
+/* .IP \fB-C\fR
+/* Disable XCLIENT support.
+/* .IP "\fB-d \fIdump-template\fR"
+/* Dump each mail transaction to a single-message file whose
+/* name is created by expanding the \fIdump-template\fR via
+/* strftime(3) and appending a pseudo-random hexadecimal number
+/* (example: "%Y%m%d%H/%M." expands into "2006081203/05.809a62e3").
+/* If the template contains "/" characters, missing directories
+/* are created automatically. The message dump format is
+/* described below.
+/* .sp
+/* Note: this option keeps one capture file open for every
+/* mail transaction in progress.
+/* .IP "\fB-D \fIdump-template\fR"
+/* Append mail transactions to a multi-message dump file whose
+/* name is created by expanding the \fIdump-template\fR via
+/* strftime(3).
+/* If the template contains "/" characters, missing directories
+/* are created automatically. The message dump format is
+/* described below.
+/* .sp
+/* Note: this option keeps one capture file open for every
+/* mail transaction in progress.
+/* .IP \fB-e\fR
+/* Do not announce ESMTP support.
+/* .IP \fB-E\fR
+/* Do not announce ENHANCEDSTATUSCODES support.
+/* .IP "\fB-f \fIcommand,command,...\fR"
+/* Reject the specified commands with a hard (5xx) error code.
+/* This option implies \fB-p\fR.
+/* .sp
+/* Examples of commands are CONNECT, HELO, EHLO, LHLO, MAIL, RCPT, VRFY,
+/* DATA, ., RSET, NOOP, and QUIT. Separate command names by
+/* white space or commas, and use quotes to protect white space
+/* from the shell. Command names are case-insensitive.
+/* .IP \fB-F\fR
+/* Disable XFORWARD support.
+/* .IP "\fB-h\fI hostname\fR"
+/* Use \fIhostname\fR in the SMTP greeting, in the HELO response,
+/* and in the EHLO response. The default hostname is "smtp-sink".
+/* .IP "\fB-H\fI delay\fR"
+/* Delay the first read operation after receiving DATA (time
+/* in seconds). Combine with a large test message and a small
+/* TCP window size (see the \fB-T\fR option) to test the Postfix
+/* client write_wait() implementation.
+/* .IP \fB-L\fR
+/* Enable LMTP instead of SMTP.
+/* .IP "\fB-m \fIcount\fR (default: 256)"
+/* An upper bound on the maximal number of simultaneous
+/* connections that \fBsmtp-sink\fR will handle. This prevents
+/* the process from running out of file descriptors. Excess
+/* connections will stay queued in the TCP/IP stack.
+/* .IP "\fB-M \fIcount\fR"
+/* Terminate after receiving \fIcount\fR messages.
+/* .IP "\fB-n \fIcount\fR"
+/* Terminate after \fIcount\fR sessions.
+/* .IP \fB-N\fR
+/* Do not announce support for DSN.
+/* .IP \fB-p\fR
+/* Do not announce support for ESMTP command pipelining.
+/* .IP \fB-P\fR
+/* Change the server greeting so that it appears to come through
+/* a CISCO PIX system. Implies \fB-e\fR.
+/* .IP "\fB-q \fIcommand,command,...\fR"
+/* Disconnect (without replying) after receiving one of the
+/* specified commands.
+/* .sp
+/* Examples of commands are CONNECT, HELO, EHLO, LHLO, MAIL, RCPT, VRFY,
+/* DATA, ., RSET, NOOP, and QUIT. Separate command names by
+/* white space or commas, and use quotes to protect white space
+/* from the shell. Command names are case-insensitive.
+/* .IP "\fB-Q \fIcommand,command,...\fR"
+/* Send a 421 reply and disconnect after receiving one
+/* of the specified commands.
+/* .sp
+/* Examples of commands are CONNECT, HELO, EHLO, LHLO, MAIL, RCPT, VRFY,
+/* DATA, ., RSET, NOOP, and QUIT. Separate command names by
+/* white space or commas, and use quotes to protect white space
+/* from the shell. Command names are case-insensitive.
+/* .IP "\fB-r \fIcommand,command,...\fR"
+/* Reject the specified commands with a soft (4xx) error code.
+/* This option implies \fB-p\fR.
+/* .sp
+/* Examples of commands are CONNECT, HELO, EHLO, LHLO, MAIL, RCPT, VRFY,
+/* DATA, ., RSET, NOOP, and QUIT. Separate command names by
+/* white space or commas, and use quotes to protect white space
+/* from the shell. Command names are case-insensitive.
+/* .IP "\fB-R \fIroot-directory\fR"
+/* Change the process root directory to the specified location.
+/* This option requires super-user privileges. See also the
+/* \fB-u\fR option.
+/* .IP "\fB-s \fIcommand,command,...\fR"
+/* Log the named commands to syslogd.
+/* .sp
+/* Examples of commands are CONNECT, HELO, EHLO, LHLO, MAIL, RCPT, VRFY,
+/* DATA, ., RSET, NOOP, and QUIT. Separate command names by
+/* white space or commas, and use quotes to protect white space
+/* from the shell. Command names are case-insensitive.
+/* .IP "\fB-S start-string\fR"
+/* An optional string that is prepended to each message that is
+/* written to a dump file (see the dump file format description
+/* below). The following C escape sequences are supported: \ea
+/* (bell), \eb (backspace), \ef (formfeed), \en (newline), \er
+/* (carriage return), \et (horizontal tab), \ev (vertical tab),
+/* \e\fIddd\fR (up to three octal digits) and \e\e (the backslash
+/* character).
+/* .IP "\fB-t \fItimeout\fR (default: 100)"
+/* Limit the time for receiving a command or sending a response.
+/* The time limit is specified in seconds.
+/* .IP "\fB-T \fIwindowsize\fR"
+/* Override the default TCP window size. To work around
+/* broken TCP window scaling implementations, specify a
+/* value > 0 and < 65536.
+/* .IP "\fB-u \fIusername\fR"
+/* Switch to the specified user privileges after opening the
+/* network socket and optionally changing the process root
+/* directory. This option is required when the process runs
+/* with super-user privileges. See also the \fB-R\fR option.
+/* .IP \fB-v\fR
+/* Show the SMTP conversations.
+/* .IP "\fB-w \fIdelay\fR"
+/* Wait \fIdelay\fR seconds before responding to a DATA command.
+/* .IP "\fB-W \fIcommand:delay[:odds]\fR"
+/* Wait \fIdelay\fR seconds before responding to \fIcommand\fR.
+/* If \fIodds\fR is also specified (a number between 1-99
+/* inclusive), wait for a random multiple of \fIdelay\fR. The
+/* random multiplier is equal to the number of times the program
+/* needs to roll a dice with a range of 0..99 inclusive, before
+/* the dice produces a result greater than or equal to \fIodds\fR.
+/* .IP [\fBinet:\fR][\fIhost\fR]:\fIport\fR
+/* Listen on network interface \fIhost\fR (default: any interface)
+/* TCP port \fIport\fR. Both \fIhost\fR and \fIport\fR may be
+/* specified in numeric or symbolic form.
+/* .IP \fBunix:\fR\fIpathname\fR
+/* Listen on the UNIX-domain socket at \fIpathname\fR.
+/* .IP \fIbacklog\fR
+/* The maximum length the queue of pending connections,
+/* as defined by the \fBlisten\fR(2) system call.
+/* DUMP FILE FORMAT
+/* .ad
+/* .fi
+/* Each dumped message contains a sequence of text lines,
+/* terminated with the newline character. The sequence of
+/* information is as follows:
+/* .IP \(bu
+/* The optional string specified with the \fB-S\fR option.
+/* .IP \(bu
+/* The \fBsmtp-sink\fR generated headers as documented below.
+/* .IP \(bu
+/* The message header and body as received from the SMTP client.
+/* .IP \(bu
+/* An empty line.
+/* .PP
+/* The format of the \fBsmtp-sink\fR generated headers is as
+/* follows:
+/* .IP "\fBX-Client-Addr: \fItext\fR"
+/* The client IP address without enclosing []. An IPv6 address
+/* is prefixed with "ipv6:". This record is always present.
+/* .IP "\fBX-Client-Proto: \fItext\fR"
+/* The client protocol: SMTP, ESMTP or LMTP. This record is
+/* always present.
+/* .IP "\fBX-Helo-Args: \fItext\fR"
+/* The arguments of the last HELO or EHLO command before this
+/* mail delivery transaction. This record is present only if
+/* the client sent a recognizable HELO or EHLO command before
+/* the DATA command.
+/* .IP "\fBX-Mail-Args: \fItext\fR"
+/* The arguments of the MAIL command that started this mail
+/* delivery transaction. This record is present exactly once.
+/* .IP "\fBX-Rcpt-Args: \fItext\fR"
+/* The arguments of an RCPT command within this mail delivery
+/* transaction. There is one record for each RCPT command, and
+/* they are in the order as sent by the client.
+/* .IP "\fBReceived: \fItext\fR"
+/* A message header for compatibility with mail processing
+/* software. This three-line header marks the end of the headers
+/* provided by \fBsmtp-sink\fR, and is formatted as follows:
+/* .RS
+/* .IP "\fBfrom \fIhelo\fR ([\fIaddr\fR])"
+/* The HELO or EHLO command argument and client IP address.
+/* If the client did not send HELO or EHLO, the client IP
+/* address is used instead.
+/* .IP "\fBby \fIhost\fB (smtp-sink) with \fIproto\fB id \fIrandom\fB;\fR"
+/* The hostname specified with the \fB-h\fR option, the client
+/* protocol (see \fBX-Client-Proto\fR above), and the pseudo-random
+/* portion of the per-message capture file name.
+/* .IP \fItime-stamp\fR
+/* A time stamp as defined in RFC 2822.
+/* .RE
+/* SEE ALSO
+/* smtp-source(1), SMTP/LMTP message generator
+/* LICENSE
+/* .ad
+/* .fi
+/* The Secure Mailer license must be distributed with this software.
+/* AUTHOR(S)
+/* Wietse Venema
+/* IBM T.J. Watson Research
+/* P.O. Box 704
+/* Yorktown Heights, NY 10598, USA
+/*
+/* Wietse Venema
+/* Google, Inc.
+/* 111 8th Avenue
+/* New York, NY 10011, USA
+/*--*/
+
+/* System library. */
+
+#include <sys_defs.h>
+#include <sys/socket.h>
+#include <sys/wait.h>
+#include <sys/stat.h>
+#include <unistd.h>
+#include <string.h>
+#include <stdlib.h>
+#include <fcntl.h>
+#include <syslog.h>
+#include <signal.h>
+#include <time.h>
+#include <ctype.h>
+
+#ifdef STRCASECMP_IN_STRINGS_H
+#include <strings.h>
+#endif
+
+/* Utility library. */
+
+#include <msg.h>
+#include <vstring.h>
+#include <vstream.h>
+#include <vstring_vstream.h>
+#include <get_hostname.h>
+#include <listen.h>
+#include <events.h>
+#include <mymalloc.h>
+#include <iostuff.h>
+#include <msg_vstream.h>
+#include <stringops.h>
+#include <sane_accept.h>
+#include <inet_proto.h>
+#include <myaddrinfo.h>
+#include <make_dirs.h>
+#include <myrand.h>
+#include <chroot_uid.h>
+
+/* Global library. */
+
+#include <smtp_stream.h>
+#include <mail_date.h>
+#include <mail_version.h>
+
+/* Application-specific. */
+
+typedef struct SINK_STATE {
+ VSTREAM *stream;
+ VSTRING *buffer;
+ int data_state;
+ int (*read_fn) (struct SINK_STATE *);
+ int in_mail;
+ int rcpts;
+ char *push_back_ptr;
+ /* Capture file information for fake Received: header */
+ MAI_HOSTADDR_STR client_addr; /* IP address */
+ char *addr_prefix; /* ipv6: or empty */
+ char *helo_args; /* text after HELO or EHLO */
+ const char *client_proto; /* SMTP, ESMTP, LMTP */
+ time_t start_time; /* MAIL command time */
+ int id; /* pseudo-random */
+ VSTREAM *dump_file; /* dump file or null */
+ void (*delayed_response) (struct SINK_STATE *state, const char *);
+ char *delayed_args;
+} SINK_STATE;
+
+#define ST_ANY 0
+#define ST_CR 1
+#define ST_CR_LF 2
+#define ST_CR_LF_DOT 3
+#define ST_CR_LF_DOT_CR 4
+#define ST_CR_LF_DOT_CR_LF 5
+
+#define PUSH_BACK_PEEK(state) (*(state)->push_back_ptr != 0)
+#define PUSH_BACK_GET(state) (*(state)->push_back_ptr++)
+#define PUSH_BACK_SET(state, text) ((state)->push_back_ptr = (text))
+
+#ifndef DEF_MAX_CLIENT_COUNT
+#define DEF_MAX_CLIENT_COUNT 256
+#endif
+
+#define SOFT_ERROR_RESP "450 4.3.0 Error: command failed"
+#define HARD_ERROR_RESP "500 5.3.0 Error: command failed"
+
+ /*
+ * We can't rely on vstream auto-flushing, so we have to prepare for the
+ * next read request.
+ */
+#define SMTP_FLUSH(fp) do { \
+ if (vstream_peek(fp) <= 0 && readable(vstream_fileno(fp)) <= 0) \
+ smtp_flush(fp); \
+ } while (0)
+
+static int var_tmout = 100;
+static int var_max_line_length = 2048;
+static char *var_myhostname;
+static char *soft_error_resp = SOFT_ERROR_RESP;
+static char *hard_error_resp = HARD_ERROR_RESP;
+static int command_read(SINK_STATE *);
+static int data_read(SINK_STATE *);
+static void disconnect(SINK_STATE *);
+static void read_timeout(int, void *);
+static void read_event(int, void *);
+static int show_count;
+static int sess_count;
+static int quit_count;
+static int mesg_count;
+static int max_quit_count;
+static int max_msg_quit_count;
+static int disable_pipelining;
+static int disable_8bitmime;
+static int disable_esmtp;
+static int enable_lmtp;
+static int pretend_pix;
+static int disable_saslauth;
+static int disable_xclient;
+static int disable_xforward;
+static int disable_enh_status;
+static int disable_dsn;
+static int max_client_count = DEF_MAX_CLIENT_COUNT;
+static int client_count;
+static int sock;
+static int abort_delay = -1;
+static int data_read_delay = 0;
+
+static char *single_template; /* individual template */
+static char *shared_template; /* shared template */
+static VSTRING *start_string; /* dump content prefix */
+
+static INET_PROTO_INFO *proto_info;
+
+#define STR(x) vstring_str(x)
+
+/* do_stats - show counters */
+
+static void do_stats(void)
+{
+ vstream_printf("sess=%d quit=%d mesg=%d\r",
+ sess_count, quit_count, mesg_count);
+ vstream_fflush(VSTREAM_OUT);
+}
+
+/* hard_err_resp - generic hard error response */
+
+static void hard_err_resp(SINK_STATE *state)
+{
+ smtp_printf(state->stream, "%s", hard_error_resp);
+ SMTP_FLUSH(state->stream);
+}
+
+/* soft_err_resp - generic soft error response */
+
+static void soft_err_resp(SINK_STATE *state)
+{
+ smtp_printf(state->stream, "%s", soft_error_resp);
+ SMTP_FLUSH(state->stream);
+}
+
+/* exp_path_template - expand template pathname, static result */
+
+static VSTRING *exp_path_template(const char *template, time_t start_time)
+{
+ static VSTRING *path_buf = 0;
+ struct tm *lt;
+
+ if (path_buf == 0)
+ path_buf = vstring_alloc(100);
+ else
+ VSTRING_RESET(path_buf);
+ lt = localtime(&start_time);
+ while (strftime(STR(path_buf), vstring_avail(path_buf), template, lt) == 0)
+ VSTRING_SPACE(path_buf, vstring_avail(path_buf) + 100);
+ VSTRING_SKIP(path_buf);
+ return (path_buf);
+}
+
+/* make_parent_dir - create parent directory or bust */
+
+static void make_parent_dir(const char *path, mode_t mode)
+{
+ const char *parent;
+
+ parent = sane_dirname((VSTRING *) 0, path);
+ if (make_dirs(parent, mode) < 0)
+ msg_fatal("mkdir %s: %m", parent);
+}
+
+/* mail_file_open - open mail capture file */
+
+static void mail_file_open(SINK_STATE *state)
+{
+ const char *myname = "mail_file_open";
+ VSTRING *path_buf;
+ ssize_t len;
+ int tries = 0;
+
+ /*
+ * Save the start time for later.
+ */
+ time(&(state->start_time));
+
+ /*
+ * Expand the per-message dumpfile pathname template.
+ */
+ path_buf = exp_path_template(single_template, state->start_time);
+
+ /*
+ * Append a random hexadecimal string to the pathname and create a new
+ * file. Retry with a different path if the file already exists. Create
+ * intermediate directories on the fly when the template specifies
+ * multiple pathname segments.
+ */
+#define ID_FORMAT "%08x"
+
+ for (len = VSTRING_LEN(path_buf); /* void */ ; vstring_truncate(path_buf, len)) {
+ if (++tries > 100)
+ msg_fatal("%s: something is looping", myname);
+ state->id = myrand();
+ vstring_sprintf_append(path_buf, ID_FORMAT, state->id);
+ if ((state->dump_file = vstream_fopen(STR(path_buf),
+ O_RDWR | O_CREAT | O_EXCL,
+ 0644)) != 0) {
+ break;
+ } else if (errno == EEXIST) {
+ continue;
+ } else if (errno == ENOENT) {
+ make_parent_dir(STR(path_buf), 0755);
+ continue;
+ } else {
+ msg_fatal("open %s: %m", STR(path_buf));
+ }
+ }
+
+ /*
+ * Don't leave temporary files behind.
+ */
+ if (shared_template != 0 && unlink(STR(path_buf)) < 0)
+ msg_fatal("unlink %s: %m", STR(path_buf));
+
+ /*
+ * Do initial header records.
+ */
+ if (start_string)
+ vstream_fprintf(state->dump_file, "%s", STR(start_string));
+ vstream_fprintf(state->dump_file, "X-Client-Addr: %s%s\n",
+ state->addr_prefix, state->client_addr.buf);
+ vstream_fprintf(state->dump_file, "X-Client-Proto: %s\n", state->client_proto);
+ if (state->helo_args)
+ vstream_fprintf(state->dump_file, "X-Helo-Args: %s\n", state->helo_args);
+ /* Note: there may be more than one recipient. */
+}
+
+/* mail_file_finish_header - do final smtp-sink generated header records */
+
+static void mail_file_finish_header(SINK_STATE *state)
+{
+ if (state->helo_args)
+ vstream_fprintf(state->dump_file, "Received: from %s ([%s%s])\n",
+ state->helo_args, state->addr_prefix,
+ state->client_addr.buf);
+ else
+ vstream_fprintf(state->dump_file, "Received: from [%s%s] ([%s%s])\n",
+ state->addr_prefix, state->client_addr.buf,
+ state->addr_prefix, state->client_addr.buf);
+ vstream_fprintf(state->dump_file, "\tby %s (smtp-sink)"
+ " with %s id " ID_FORMAT ";\n",
+ var_myhostname, state->client_proto, state->id);
+ vstream_fprintf(state->dump_file, "\t%s\n", mail_date(state->start_time));
+}
+
+/* mail_file_cleanup - common cleanup for capture file */
+
+static void mail_file_cleanup(SINK_STATE *state)
+{
+ (void) vstream_fclose(state->dump_file);
+ state->dump_file = 0;
+}
+
+/* mail_file_finish - handle message completion for capture file */
+
+static void mail_file_finish(SINK_STATE *state)
+{
+
+ /*
+ * Optionally append the captured message to a shared dumpfile.
+ */
+ if (shared_template) {
+ const char *out_path;
+ VSTREAM *out_fp;
+ ssize_t count;
+
+ /*
+ * Expand the shared dumpfile pathname template.
+ */
+ out_path = STR(exp_path_template(shared_template, state->start_time));
+
+ /*
+ * Open the shared dump file.
+ */
+#define OUT_OPEN_FLAGS (O_WRONLY | O_CREAT | O_APPEND)
+#define OUT_OPEN_MODE 0644
+
+ if ((out_fp = vstream_fopen(out_path, OUT_OPEN_FLAGS, OUT_OPEN_MODE))
+ == 0 && errno == ENOENT) {
+ make_parent_dir(out_path, 0755);
+ out_fp = vstream_fopen(out_path, OUT_OPEN_FLAGS, OUT_OPEN_MODE);
+ }
+ if (out_fp == 0)
+ msg_fatal("open %s: %m", out_path);
+
+ /*
+ * Append message content from single-message dump file.
+ */
+ if (vstream_fseek(state->dump_file, 0L, SEEK_SET) < 0)
+ msg_fatal("seek file %s: %m", VSTREAM_PATH(state->dump_file));
+ VSTRING_RESET(state->buffer);
+ for (;;) {
+ count = vstream_fread(state->dump_file, STR(state->buffer),
+ vstring_avail(state->buffer));
+ if (count <= 0)
+ break;
+ if (vstream_fwrite(out_fp, STR(state->buffer), count) != count)
+ msg_fatal("append file %s: %m", out_path);
+ }
+ if (vstream_ferror(state->dump_file))
+ msg_fatal("read file %s: %m", VSTREAM_PATH(state->dump_file));
+ if (vstream_fclose(out_fp))
+ msg_fatal("append file %s: %m", out_path);
+ }
+ mail_file_cleanup(state);
+}
+
+/* mail_file_reset - abort mail to capture file */
+
+static void mail_file_reset(SINK_STATE *state)
+{
+ if (shared_template == 0
+ && unlink(VSTREAM_PATH(state->dump_file)) < 0
+ && errno != ENOENT)
+ msg_fatal("unlink %s: %m", VSTREAM_PATH(state->dump_file));
+ mail_file_cleanup(state);
+}
+
+/* mail_cmd_reset - reset mail transaction information */
+
+static void mail_cmd_reset(SINK_STATE *state)
+{
+ state->in_mail = 0;
+ /* Not: state->rcpts = 0. This breaks the DOT reply with LMTP. */
+ if (state->dump_file)
+ mail_file_reset(state);
+}
+
+/* ehlo_response - respond to EHLO command */
+
+static void ehlo_response(SINK_STATE *state, const char *args)
+{
+#define SKIP(cp, cond) do { \
+ for (/* void */; *cp && (cond); cp++) \
+ /* void */; \
+ } while (0)
+
+ /* EHLO aborts a mail transaction in progress. */
+ mail_cmd_reset(state);
+ if (enable_lmtp == 0)
+ state->client_proto = "ESMTP";
+ smtp_printf(state->stream, "250-%s", var_myhostname);
+ if (!disable_pipelining)
+ smtp_printf(state->stream, "250-PIPELINING");
+ if (!disable_8bitmime)
+ smtp_printf(state->stream, "250-8BITMIME");
+ if (!disable_saslauth)
+ smtp_printf(state->stream, "250-AUTH PLAIN LOGIN");
+ if (!disable_xclient)
+ smtp_printf(state->stream, "250-XCLIENT NAME HELO");
+ if (!disable_xforward)
+ smtp_printf(state->stream, "250-XFORWARD NAME ADDR PROTO HELO");
+ if (!disable_enh_status)
+ smtp_printf(state->stream, "250-ENHANCEDSTATUSCODES");
+ if (!disable_dsn)
+ smtp_printf(state->stream, "250-DSN");
+ /* RFC 821/2821/5321: Format is replycode<SPACE>optional-text<CRLF> */
+ smtp_printf(state->stream, "250 ");
+ SMTP_FLUSH(state->stream);
+ if (single_template) {
+ if (state->helo_args)
+ myfree(state->helo_args);
+ SKIP(args, ISSPACE(*args));
+ state->helo_args = mystrdup(args);
+ }
+}
+
+/* helo_response - respond to HELO command */
+
+static void helo_response(SINK_STATE *state, const char *args)
+{
+ /* HELO aborts a mail transaction in progress. */
+ mail_cmd_reset(state);
+ state->client_proto = "SMTP";
+ smtp_printf(state->stream, "250 %s", var_myhostname);
+ SMTP_FLUSH(state->stream);
+ if (single_template) {
+ if (state->helo_args)
+ myfree(state->helo_args);
+ SKIP(args, ISSPACE(*args));
+ state->helo_args = mystrdup(args);
+ }
+}
+
+/* ok_response - send 250 OK */
+
+static void ok_response(SINK_STATE *state, const char *unused_args)
+{
+ smtp_printf(state->stream, "250 2.0.0 Ok");
+ SMTP_FLUSH(state->stream);
+}
+
+/* rset_response - reset, send 250 OK */
+
+static void rset_response(SINK_STATE *state, const char *unused_args)
+{
+ mail_cmd_reset(state);
+ smtp_printf(state->stream, "250 2.1.0 Ok");
+ SMTP_FLUSH(state->stream);
+}
+
+/* mail_response - reset recipient count, send 250 OK */
+
+static void mail_response(SINK_STATE *state, const char *args)
+{
+ if (state->in_mail) {
+ smtp_printf(state->stream, "503 5.5.1 Error: nested MAIL command");
+ SMTP_FLUSH(state->stream);
+ return;
+ }
+ state->in_mail++;
+ state->rcpts = 0;
+ smtp_printf(state->stream, "250 2.1.0 Ok");
+ SMTP_FLUSH(state->stream);
+ if (single_template) {
+ mail_file_open(state);
+ SKIP(args, *args != ':');
+ SKIP(args, *args == ':');
+ SKIP(args, ISSPACE(*args));
+ vstream_fprintf(state->dump_file, "X-Mail-Args: %s\n", args);
+ }
+}
+
+/* rcpt_response - bump recipient count, send 250 OK */
+
+static void rcpt_response(SINK_STATE *state, const char *args)
+{
+ if (state->in_mail == 0) {
+ smtp_printf(state->stream, "503 5.5.1 Error: need MAIL command");
+ SMTP_FLUSH(state->stream);
+ return;
+ }
+ state->rcpts++;
+ smtp_printf(state->stream, "250 2.1.5 Ok");
+ SMTP_FLUSH(state->stream);
+ /* Note: there may be more than one recipient per mail transaction. */
+ if (state->dump_file) {
+ SKIP(args, *args != ':');
+ SKIP(args, *args == ':');
+ SKIP(args, ISSPACE(*args));
+ vstream_fprintf(state->dump_file, "X-Rcpt-Args: %s\n", args);
+ }
+}
+
+/* abort_event - delayed abort after DATA command */
+
+static void abort_event(int unused_event, void *context)
+{
+ SINK_STATE *state = (SINK_STATE *) context;
+
+ smtp_printf(state->stream, "550 This violates SMTP");
+ SMTP_FLUSH(state->stream);
+ disconnect(state);
+}
+
+/* delay_read_event - resume input event handling */
+
+static void delay_read_event(int event, void *context)
+{
+ SINK_STATE *state = (SINK_STATE *) context;
+
+ if (event != EVENT_TIME)
+ msg_panic("delay_read_event: non-timer event %d", event);
+
+ event_enable_read(vstream_fileno(state->stream), read_event, (void *) state);
+ event_request_timer(read_timeout, (void *) state, var_tmout);
+}
+
+/* delay_read - temporarily suspend input event handling */
+
+static void delay_read(SINK_STATE *state, int delay)
+{
+ event_disable_readwrite(vstream_fileno(state->stream));
+ event_cancel_timer(read_timeout, (void *) state);
+ event_request_timer(delay_read_event, (void *) state, delay);
+}
+
+/* data_response - respond to DATA command */
+
+static void data_response(SINK_STATE *state, const char *unused_args)
+{
+ if (state->in_mail == 0 || state->rcpts == 0) {
+ smtp_printf(state->stream, "503 5.5.1 Error: need RCPT command");
+ SMTP_FLUSH(state->stream);
+ return;
+ }
+ /* Not: ST_ANY. */
+ state->data_state = ST_CR_LF;
+ smtp_printf(state->stream, "354 End data with <CR><LF>.<CR><LF>");
+ SMTP_FLUSH(state->stream);
+ if (abort_delay < 0) {
+ state->read_fn = data_read;
+ /* Todo: move into code that invokes the command response function. */
+ if (data_read_delay > 0)
+ delay_read(state, data_read_delay);
+ } else {
+ /* Stop reading, send premature 550, and disconnect. */
+ event_disable_readwrite(vstream_fileno(state->stream));
+ event_cancel_timer(read_event, (void *) state);
+ event_request_timer(abort_event, (void *) state, abort_delay);
+ }
+ if (state->dump_file)
+ mail_file_finish_header(state);
+}
+
+/* dot_resp_hard - hard error response to . command */
+
+static void dot_resp_hard(SINK_STATE *state)
+{
+ if (enable_lmtp) {
+ while (state->rcpts-- > 0) /* XXX this could block */
+ smtp_printf(state->stream, "%s", hard_error_resp);
+ } else {
+ smtp_printf(state->stream, "%s", hard_error_resp);
+ }
+ SMTP_FLUSH(state->stream);
+}
+
+/* dot_resp_soft - soft error response to . command */
+
+static void dot_resp_soft(SINK_STATE *state)
+{
+ if (enable_lmtp) {
+ while (state->rcpts-- > 0) /* XXX this could block */
+ smtp_printf(state->stream, "%s", soft_error_resp);
+ } else {
+ smtp_printf(state->stream, "%s", soft_error_resp);
+ }
+ SMTP_FLUSH(state->stream);
+}
+
+/* dot_response - response to . command */
+
+static void dot_response(SINK_STATE *state, const char *unused_args)
+{
+ if (enable_lmtp) {
+ while (state->rcpts-- > 0) /* XXX this could block */
+ smtp_printf(state->stream, "250 2.2.0 Ok");
+ } else {
+ smtp_printf(state->stream, "250 2.0.0 Ok");
+ }
+ SMTP_FLUSH(state->stream);
+}
+
+/* quit_response - respond to QUIT command */
+
+static void quit_response(SINK_STATE *state, const char *unused_args)
+{
+ smtp_printf(state->stream, "221 Bye");
+ smtp_flush(state->stream); /* not: SMTP_FLUSH */
+ if (show_count)
+ quit_count++;
+}
+
+/* conn_response - respond to connect command */
+
+static void conn_response(SINK_STATE *state, const char *unused_args)
+{
+ if (pretend_pix)
+ smtp_printf(state->stream, "220 ********");
+ else if (disable_esmtp)
+ smtp_printf(state->stream, "220 %s", var_myhostname);
+ else
+ smtp_printf(state->stream, "220 %s ESMTP", var_myhostname);
+ SMTP_FLUSH(state->stream);
+}
+
+/* delay_event - delayed command response */
+
+static void delay_event(int unused_event, void *context)
+{
+ SINK_STATE *state = (SINK_STATE *) context;
+
+ switch (vstream_setjmp(state->stream)) {
+
+ default:
+ msg_panic("unknown read/write error");
+ /* NOTREACHED */
+
+ case SMTP_ERR_TIME:
+ msg_warn("write timeout");
+ disconnect(state);
+ return;
+
+ case SMTP_ERR_EOF:
+ msg_warn("lost connection");
+ disconnect(state);
+ return;
+
+ case 0:
+ state->delayed_response(state, state->delayed_args);
+ myfree(state->delayed_args);
+ state->delayed_args = 0;
+ break;
+ }
+
+ if (state->delayed_response == quit_response) {
+ disconnect(state);
+ return;
+ }
+ state->delayed_response = 0;
+
+ /* Resume input event handling after the delayed response. */
+ event_enable_read(vstream_fileno(state->stream), read_event, (void *) state);
+ event_request_timer(read_timeout, (void *) state, var_tmout);
+}
+
+/* data_read - read data from socket */
+
+static int data_read(SINK_STATE *state)
+{
+ int ch;
+ struct data_trans {
+ int state;
+ int want;
+ int next_state;
+ };
+ static struct data_trans data_trans[] = {
+ ST_ANY, '\r', ST_CR,
+ ST_CR, '\n', ST_CR_LF,
+ ST_CR_LF, '.', ST_CR_LF_DOT,
+ ST_CR_LF_DOT, '\r', ST_CR_LF_DOT_CR,
+ ST_CR_LF_DOT_CR, '\n', ST_CR_LF_DOT_CR_LF,
+ };
+ struct data_trans *dp;
+
+ /*
+ * A read may result in EOF, but is never supposed to time out - a time
+ * out means that we were trying to read when no data was available.
+ */
+ for (;;) {
+ if ((ch = VSTREAM_GETC(state->stream)) == VSTREAM_EOF)
+ return (-1);
+ for (dp = data_trans; dp->state != state->data_state; dp++)
+ /* void */ ;
+
+ /*
+ * Try to match the current character desired by the state machine.
+ * If that fails, try to restart the machine with a match for its
+ * first state. This covers the case of a CR/LF/CR/LF sequence
+ * (empty line) right before the end of the message data.
+ */
+ if (ch == dp->want)
+ state->data_state = dp->next_state;
+ else if (ch == data_trans[0].want)
+ state->data_state = data_trans[0].next_state;
+ else
+ state->data_state = ST_ANY;
+ if (state->dump_file) {
+ if (ch != '\r' && state->data_state != ST_CR_LF_DOT)
+ VSTREAM_PUTC(ch, state->dump_file);
+ if (vstream_ferror(state->dump_file))
+ msg_fatal("append file %s: %m", VSTREAM_PATH(state->dump_file));
+ }
+ if (state->data_state == ST_CR_LF_DOT_CR_LF) {
+ PUSH_BACK_SET(state, ".\r\n");
+ state->read_fn = command_read;
+ state->data_state = ST_ANY;
+ if (state->dump_file)
+ mail_file_finish(state);
+ mail_cmd_reset(state);
+ if (show_count || max_msg_quit_count > 0) {
+ mesg_count++;
+ if (show_count)
+ do_stats();
+ if (max_msg_quit_count > 0 && mesg_count >= max_msg_quit_count)
+ exit(0);
+ }
+ break;
+ }
+
+ /*
+ * We must avoid blocking I/O, so get out of here as soon as both the
+ * VSTREAM and kernel read buffers dry up.
+ */
+ if (vstream_peek(state->stream) <= 0
+ && readable(vstream_fileno(state->stream)) <= 0)
+ return (0);
+ }
+ return (0);
+}
+
+ /*
+ * The table of all SMTP commands that we can handle.
+ */
+typedef struct SINK_COMMAND {
+ const char *name;
+ void (*response) (SINK_STATE *, const char *);
+ void (*hard_response) (SINK_STATE *);
+ void (*soft_response) (SINK_STATE *);
+ int flags;
+ int delay;
+ int delay_odds;
+} SINK_COMMAND;
+
+#define FLAG_ENABLE (1<<0) /* command is enabled */
+#define FLAG_SYSLOG (1<<1) /* log the command */
+#define FLAG_HARD_ERR (1<<2) /* report hard error */
+#define FLAG_SOFT_ERR (1<<3) /* report soft error */
+#define FLAG_DISCONNECT (1<<4) /* disconnect */
+#define FLAG_CLOSE (1<<5) /* say goodbye and disconnect */
+
+static SINK_COMMAND command_table[] = {
+ "connect", conn_response, hard_err_resp, soft_err_resp, 0, 0, 0,
+ "helo", helo_response, hard_err_resp, soft_err_resp, 0, 0, 0,
+ "ehlo", ehlo_response, hard_err_resp, soft_err_resp, 0, 0, 0,
+ "lhlo", ehlo_response, hard_err_resp, soft_err_resp, 0, 0, 0,
+ "xclient", ok_response, hard_err_resp, soft_err_resp, FLAG_ENABLE, 0, 0,
+ "xforward", ok_response, hard_err_resp, soft_err_resp, FLAG_ENABLE, 0, 0,
+ "auth", ok_response, hard_err_resp, soft_err_resp, FLAG_ENABLE, 0, 0,
+ "mail", mail_response, hard_err_resp, soft_err_resp, FLAG_ENABLE, 0, 0,
+ "rcpt", rcpt_response, hard_err_resp, soft_err_resp, FLAG_ENABLE, 0, 0,
+ "data", data_response, hard_err_resp, soft_err_resp, FLAG_ENABLE, 0, 0,
+ ".", dot_response, dot_resp_hard, dot_resp_soft, FLAG_ENABLE, 0, 0,
+ "rset", rset_response, hard_err_resp, soft_err_resp, FLAG_ENABLE, 0, 0,
+ "noop", ok_response, hard_err_resp, soft_err_resp, FLAG_ENABLE, 0, 0,
+ "vrfy", ok_response, hard_err_resp, soft_err_resp, FLAG_ENABLE, 0, 0,
+ "quit", quit_response, hard_err_resp, soft_err_resp, FLAG_ENABLE, 0, 0,
+ 0,
+};
+
+/* reset_cmd_flags - reset per-command command flags */
+
+static void reset_cmd_flags(const char *cmd, int flags)
+{
+ SINK_COMMAND *cmdp;
+
+ for (cmdp = command_table; cmdp->name != 0; cmdp++)
+ if (strcasecmp(cmd, cmdp->name) == 0)
+ break;
+ if (cmdp->name == 0)
+ msg_fatal("unknown command: %s", cmd);
+ cmdp->flags &= ~flags;
+}
+
+/* set_cmd_flags - set per-command command flags */
+
+static void set_cmd_flags(const char *cmd, int flags)
+{
+ SINK_COMMAND *cmdp;
+
+ for (cmdp = command_table; cmdp->name != 0; cmdp++)
+ if (strcasecmp(cmd, cmdp->name) == 0)
+ break;
+ if (cmdp->name == 0)
+ msg_fatal("unknown command: %s", cmd);
+ cmdp->flags |= flags;
+}
+
+/* set_cmds_flags - set per-command flags for multiple commands */
+
+static void set_cmds_flags(const char *cmds, int flags)
+{
+ char *saved_cmds;
+ char *cp;
+ char *cmd;
+
+ saved_cmds = cp = mystrdup(cmds);
+ while ((cmd = mystrtok(&cp, CHARS_COMMA_SP)) != 0)
+ set_cmd_flags(cmd, flags);
+ myfree(saved_cmds);
+}
+
+/* set_cmd_delay - set per-command delay */
+
+static void set_cmd_delay(const char *cmd, int delay, int odds)
+{
+ SINK_COMMAND *cmdp;
+
+ for (cmdp = command_table; cmdp->name != 0; cmdp++)
+ if (strcasecmp(cmd, cmdp->name) == 0)
+ break;
+ if (cmdp->name == 0)
+ msg_fatal("unknown command: %s", cmd);
+
+ if (delay <= 0)
+ msg_fatal("non-positive '%s' delay", cmd);
+ if (odds < 0 || odds > 99)
+ msg_fatal("delay odds for '%s' out of range", cmd);
+
+ cmdp->delay = delay;
+ cmdp->delay_odds = odds;
+}
+
+/* set_cmd_delay_arg - set per-command delay from option argument */
+
+static void set_cmd_delay_arg(char *arg)
+{
+ char *cp;
+ char *saved_arg;
+ char *cmd;
+ char *delay;
+ char *odds;
+
+ saved_arg = cp = mystrdup(arg);
+ cmd = mystrtok(&cp, ":");
+ delay = mystrtok(&cp, ":");
+ if (cmd == 0 || delay == 0)
+ msg_fatal("invalid command delay argument: %s", arg);
+ odds = mystrtok(&cp, "");
+ set_cmd_delay(cmd, atoi(delay), odds ? atoi(odds) : 0);
+ myfree(saved_arg);
+}
+
+/* command_resp - respond to command */
+
+static int command_resp(SINK_STATE *state, SINK_COMMAND *cmdp,
+ const char *command, const char *args)
+{
+ /* We use raw syslog. Sanitize data content and length. */
+ if (cmdp->flags & FLAG_SYSLOG)
+ syslog(LOG_INFO, "%s %.100s", command, args);
+ if (cmdp->flags & FLAG_DISCONNECT)
+ return (-1);
+ if (cmdp->flags & FLAG_CLOSE) {
+ smtp_printf(state->stream, "421 4.0.0 Server closing connection");
+ return (-1);
+ }
+ if (cmdp->flags & FLAG_HARD_ERR) {
+ cmdp->hard_response(state);
+ return (0);
+ }
+ if (cmdp->flags & FLAG_SOFT_ERR) {
+ cmdp->soft_response(state);
+ return (0);
+ }
+ if (cmdp->delay > 0) {
+ int delay = cmdp->delay;
+
+ if (cmdp->delay_odds > 0)
+ for (delay = 0;
+ ((int) (100.0 * rand() / (RAND_MAX + 1.0))) < cmdp->delay_odds;
+ delay += cmdp->delay)
+ /* NOP */ ;
+ /* Suspend input event handling while delaying the command response. */
+ event_disable_readwrite(vstream_fileno(state->stream));
+ event_cancel_timer(read_timeout, (void *) state);
+ event_request_timer(delay_event, (void *) state, delay);
+ state->delayed_response = cmdp->response;
+ state->delayed_args = mystrdup(args);
+ } else {
+ cmdp->response(state, args);
+ if (cmdp->response == quit_response)
+ return (-1);
+ }
+ return (0);
+}
+
+/* command_read - talk the SMTP protocol, server side */
+
+static int command_read(SINK_STATE *state)
+{
+ char *command;
+ SINK_COMMAND *cmdp;
+ int ch;
+ struct cmd_trans {
+ int state;
+ int want;
+ int next_state;
+ };
+ static struct cmd_trans cmd_trans[] = {
+ ST_ANY, '\r', ST_CR,
+ ST_CR, '\n', ST_CR_LF,
+ 0, 0, 0,
+ };
+ struct cmd_trans *cp;
+ char *ptr;
+
+ /*
+ * A read may result in EOF, but is never supposed to time out - a time
+ * out means that we were trying to read when no data was available.
+ */
+#define NEXT_CHAR(state) \
+ (PUSH_BACK_PEEK(state) ? PUSH_BACK_GET(state) : VSTREAM_GETC(state->stream))
+
+ if (state->data_state == ST_CR_LF)
+ state->data_state = ST_ANY; /* XXX */
+ for (;;) {
+ if ((ch = NEXT_CHAR(state)) == VSTREAM_EOF)
+ return (-1);
+
+ /*
+ * Sanity check. We don't want to store infinitely long commands.
+ */
+ if (VSTRING_LEN(state->buffer) >= var_max_line_length) {
+ msg_warn("command line too long");
+ return (-1);
+ }
+ VSTRING_ADDCH(state->buffer, ch);
+
+ /*
+ * Try to match the current character desired by the state machine.
+ * If that fails, try to restart the machine with a match for its
+ * first state.
+ */
+ for (cp = cmd_trans; cp->state != state->data_state; cp++)
+ if (cp->want == 0)
+ msg_panic("command_read: unknown state: %d", state->data_state);
+ if (ch == cp->want)
+ state->data_state = cp->next_state;
+ else if (ch == cmd_trans[0].want)
+ state->data_state = cmd_trans[0].next_state;
+ else
+ state->data_state = ST_ANY;
+ if (state->data_state == ST_CR_LF)
+ break;
+
+ /*
+ * We must avoid blocking I/O, so get out of here as soon as both the
+ * VSTREAM and kernel read buffers dry up.
+ *
+ * XXX Solaris non-blocking read() may fail on a socket when ioctl
+ * FIONREAD reports there is unread data. Diagnosis by Max Pashkov.
+ * As a workaround we use readable() (which uses poll or select())
+ * instead of peek_fd() (which uses ioctl FIONREAD). Workaround added
+ * 20020604.
+ */
+ if (PUSH_BACK_PEEK(state) == 0 && vstream_peek(state->stream) <= 0
+ && readable(vstream_fileno(state->stream)) <= 0)
+ return (0);
+ }
+
+ /*
+ * Properly terminate the result, and reset the buffer write pointer for
+ * reading the next command. This is ugly, but not as ugly as trying to
+ * deal with all the early returns below.
+ */
+ vstring_truncate(state->buffer, VSTRING_LEN(state->buffer) - 2);
+ VSTRING_TERMINATE(state->buffer);
+ state->data_state = ST_CR_LF;
+ VSTRING_RESET(state->buffer);
+
+ /*
+ * Got a complete command line. Parse it.
+ */
+ ptr = vstring_str(state->buffer);
+ if (msg_verbose)
+ msg_info("%s", ptr);
+ if ((command = mystrtok(&ptr, " \t")) == 0) {
+ smtp_printf(state->stream, "500 5.5.2 Error: unknown command");
+ SMTP_FLUSH(state->stream);
+ return (0);
+ }
+ for (cmdp = command_table; cmdp->name != 0; cmdp++)
+ if (strcasecmp(command, cmdp->name) == 0)
+ break;
+ if (cmdp->name == 0 || (cmdp->flags & FLAG_ENABLE) == 0) {
+ smtp_printf(state->stream, "500 5.5.1 Error: unknown command");
+ SMTP_FLUSH(state->stream);
+ return (0);
+ }
+ return (command_resp(state, cmdp, command, printable(ptr, '?')));
+}
+
+/* read_timeout - handle timer event */
+
+static void read_timeout(int unused_event, void *context)
+{
+ SINK_STATE *state = (SINK_STATE *) context;
+
+ /*
+ * We don't send anything to the client, because we would have to set up
+ * an smtp_stream exception handler first. And that is just too much
+ * trouble.
+ */
+ msg_warn("read timeout");
+ disconnect(state);
+}
+
+/* read_event - handle command or data read events */
+
+static void read_event(int unused_event, void *context)
+{
+ SINK_STATE *state = (SINK_STATE *) context;
+
+ /*
+ * The input reading routine not only reads input (with vstream calls)
+ * but also produces output (with smtp_stream calls). Because the output
+ * routines can raise timeout or EOF exceptions with vstream_longjmp(),
+ * the input reading routine needs to set up corresponding exception
+ * handlers with vstream_setjmp(). Guarding the input operations in the
+ * same manner is not useful: we must read input in non-blocking mode, so
+ * we never get called when the socket stays unreadable too long. And EOF
+ * is already trivial to detect with the vstream calls.
+ */
+ do {
+ switch (vstream_setjmp(state->stream)) {
+
+ default:
+ msg_panic("unknown read/write error");
+ /* NOTREACHED */
+
+ case SMTP_ERR_TIME:
+ msg_warn("write timeout");
+ disconnect(state);
+ return;
+
+ case SMTP_ERR_EOF:
+ msg_warn("lost connection");
+ disconnect(state);
+ return;
+
+ case 0:
+ if (state->read_fn(state) < 0) {
+ if (msg_verbose)
+ msg_info("disconnect");
+ disconnect(state);
+ return;
+ }
+ }
+ } while (PUSH_BACK_PEEK(state) != 0 || vstream_peek(state->stream) > 0);
+
+ /*
+ * Reset the idle timer. Wait until the next input event, or until the
+ * idle timer goes off.
+ */
+ event_request_timer(read_timeout, (void *) state, var_tmout);
+}
+
+static void connect_event(int, void *);
+
+/* disconnect - handle disconnection events */
+
+static void disconnect(SINK_STATE *state)
+{
+ event_disable_readwrite(vstream_fileno(state->stream));
+ event_cancel_timer(read_timeout, (void *) state);
+ if (show_count) {
+ sess_count++;
+ do_stats();
+ }
+ vstream_fclose(state->stream);
+ vstring_free(state->buffer);
+ /* Clean up file capture attributes. */
+ if (state->helo_args)
+ myfree(state->helo_args);
+ /* Delete incomplete mail transaction. */
+ mail_cmd_reset(state);
+ if (state->delayed_args)
+ myfree(state->delayed_args);
+ myfree((void *) state);
+ if (max_quit_count > 0 && quit_count >= max_quit_count)
+ exit(0);
+ if (client_count-- == max_client_count)
+ event_enable_read(sock, connect_event, (void *) 0);
+}
+
+/* connect_event - handle connection events */
+
+static void connect_event(int unused_event, void *unused_context)
+{
+ struct sockaddr_storage ss;
+ SOCKADDR_SIZE len = sizeof(ss);
+ struct sockaddr *sa = (struct sockaddr *) &ss;
+ SINK_STATE *state;
+ int fd;
+
+ if ((fd = sane_accept(sock, sa, &len)) >= 0) {
+ /* Safety: limit the number of open sockets and capture files. */
+ if (++client_count == max_client_count)
+ event_disable_readwrite(sock);
+ state = (SINK_STATE *) mymalloc(sizeof(*state));
+ if (strchr((char *) proto_info->sa_family_list, sa->sa_family))
+ SOCKADDR_TO_HOSTADDR(sa, len, &state->client_addr,
+ (MAI_SERVPORT_STR *) 0, sa->sa_family);
+ else
+ strncpy(state->client_addr.buf, "local", sizeof("local"));
+ if (msg_verbose)
+ msg_info("connect (%s %s)",
+#ifdef AF_LOCAL
+ sa->sa_family == AF_LOCAL ? "AF_LOCAL" :
+#else
+ sa->sa_family == AF_UNIX ? "AF_UNIX" :
+#endif
+ sa->sa_family == AF_INET ? "AF_INET" :
+#ifdef AF_INET6
+ sa->sa_family == AF_INET6 ? "AF_INET6" :
+#endif
+ "unknown protocol family",
+ state->client_addr.buf);
+ non_blocking(fd, NON_BLOCKING);
+ state->stream = vstream_fdopen(fd, O_RDWR);
+ vstream_tweak_sock(state->stream);
+ state->buffer = vstring_alloc(1024);
+ state->read_fn = command_read;
+ state->data_state = ST_ANY;
+ PUSH_BACK_SET(state, "");
+ smtp_timeout_setup(state->stream, var_tmout);
+ state->in_mail = 0;
+ state->rcpts = 0;
+ state->delayed_response = 0;
+ state->delayed_args = 0;
+ /* Initialize file capture attributes. */
+#ifdef AF_INET6
+ if (sa->sa_family == AF_INET6)
+ state->addr_prefix = "ipv6:";
+ else
+#endif
+ state->addr_prefix = "";
+
+ state->helo_args = 0;
+ state->client_proto = enable_lmtp ? "LMTP" : "SMTP";
+ state->start_time = 0;
+ state->id = 0;
+ state->dump_file = 0;
+
+ /*
+ * We use the smtp_stream module to produce output. That module
+ * throws an exception via vstream_longjmp() in case of a timeout or
+ * lost connection error. Therefore we must prepare to handle these
+ * exceptions with vstream_setjmp().
+ */
+ switch (vstream_setjmp(state->stream)) {
+
+ default:
+ msg_panic("unknown read/write error");
+ /* NOTREACHED */
+
+ case SMTP_ERR_TIME:
+ msg_warn("write timeout");
+ disconnect(state);
+ return;
+
+ case SMTP_ERR_EOF:
+ msg_warn("lost connection");
+ disconnect(state);
+ return;
+
+ case 0:
+ if (command_resp(state, command_table, "connect", "") < 0)
+ disconnect(state);
+ else if (command_table->delay == 0) {
+ event_enable_read(fd, read_event, (void *) state);
+ event_request_timer(read_timeout, (void *) state, var_tmout);
+ }
+ }
+ }
+}
+
+/* usage - explain */
+
+static void usage(char *myname)
+{
+ msg_fatal("usage: %s [-468acCeEFLpPv] [-A abort_delay] [-b soft_bounce_reply] [-B hard_bounce_reply] [-d dump-template] [-D dump-template] [-f commands] [-h hostname] [-m max_concurrency] [-M message_quit_count] [-n quit_count] [-q commands] [-r commands] [-R root-dir] [-s commands] [-S start-string] [-u user_privs] [-w delay] [host]:port backlog", myname);
+}
+
+MAIL_VERSION_STAMP_DECLARE;
+
+int main(int argc, char **argv)
+{
+ int backlog;
+ int ch;
+ int delay;
+ const char *protocols = INET_PROTO_NAME_ALL;
+ const char *root_dir = 0;
+ const char *user_privs = 0;
+
+ /*
+ * Fingerprint executables and core dumps.
+ */
+ MAIL_VERSION_STAMP_ALLOCATE;
+
+ /*
+ * Fix 20051207.
+ */
+ signal(SIGPIPE, SIG_IGN);
+
+ /*
+ * Initialize diagnostics.
+ */
+ msg_vstream_init(argv[0], VSTREAM_ERR);
+
+ /*
+ * Parse JCL.
+ */
+ while ((ch = GETOPT(argc, argv, "468aA:b:B:cCd:D:eEf:Fh:H:Ln:m:M:NpPq:Q:r:R:s:S:t:T:u:vw:W:")) > 0) {
+ switch (ch) {
+ case '4':
+ protocols = INET_PROTO_NAME_IPV4;
+ break;
+ case '6':
+ protocols = INET_PROTO_NAME_IPV6;
+ break;
+ case '8':
+ disable_8bitmime = 1;
+ break;
+ case 'a':
+ disable_saslauth = 1;
+ break;
+ case 'A':
+ if (!alldig(optarg) || (abort_delay = atoi(optarg)) < 0)
+ usage(argv[0]);
+ break;
+ case 'b':
+ if (optarg[0] != '4' || strspn(optarg, "0123456789") != 3) {
+ msg_error("bad soft error reply: %s", optarg);
+ usage(argv[0]);
+ } else
+ soft_error_resp = optarg;
+ break;
+ case 'B':
+ if (optarg[0] != '5' || strspn(optarg, "0123456789") != 3) {
+ msg_error("bad hard error reply: %s", optarg);
+ usage(argv[0]);
+ } else
+ hard_error_resp = optarg;
+ break;
+ case 'c':
+ show_count++;
+ break;
+ case 'C':
+ disable_xclient = 1;
+ reset_cmd_flags("xclient", FLAG_ENABLE);
+ break;
+ case 'd':
+ single_template = optarg;
+ break;
+ case 'D':
+ shared_template = optarg;
+ break;
+ case 'e':
+ disable_esmtp = 1;
+ break;
+ case 'E':
+ disable_enh_status = 1;
+ break;
+ case 'f':
+ set_cmds_flags(optarg, FLAG_HARD_ERR);
+ disable_pipelining = 1;
+ break;
+ case 'F':
+ disable_xforward = 1;
+ reset_cmd_flags("xforward", FLAG_ENABLE);
+ break;
+ case 'h':
+ var_myhostname = optarg;
+ break;
+ case 'H':
+ if ((data_read_delay = atoi(optarg)) <= 0)
+ msg_fatal("bad data read delay: %s", optarg);
+ break;
+ case 'L':
+ enable_lmtp = 1;
+ break;
+ case 'm':
+ if ((max_client_count = atoi(optarg)) <= 0)
+ msg_fatal("bad concurrency limit: %s", optarg);
+ break;
+ case 'M':
+ if ((max_msg_quit_count = atoi(optarg)) <= 0)
+ msg_fatal("bad message quit count: %s", optarg);
+ break;
+ case 'n':
+ if ((max_quit_count = atoi(optarg)) <= 0)
+ msg_fatal("bad quit count: %s", optarg);
+ break;
+ case 'N':
+ disable_dsn = 1;
+ break;
+ case 'p':
+ disable_pipelining = 1;
+ break;
+ case 'P':
+ pretend_pix = 1;
+ disable_esmtp = 1;
+ break;
+ case 'q':
+ set_cmds_flags(optarg, FLAG_DISCONNECT);
+ break;
+ case 'Q':
+ set_cmds_flags(optarg, FLAG_CLOSE);
+ break;
+ case 'r':
+ set_cmds_flags(optarg, FLAG_SOFT_ERR);
+ disable_pipelining = 1;
+ break;
+ case 'R':
+ root_dir = optarg;
+ break;
+ case 's':
+ openlog(basename(argv[0]), LOG_PID, LOG_MAIL);
+ set_cmds_flags(optarg, FLAG_SYSLOG);
+ break;
+ case 'S':
+ start_string = vstring_alloc(10);
+ unescape(start_string, optarg);
+ break;
+ case 't':
+ if ((var_tmout = atoi(optarg)) <= 0)
+ msg_fatal("bad timeout: %s", optarg);
+ break;
+ case 'T':
+ if ((inet_windowsize = atoi(optarg)) <= 0)
+ msg_fatal("bad TCP window size: %s", optarg);
+ break;
+ case 'u':
+ user_privs = optarg;
+ break;
+ case 'v':
+ msg_verbose++;
+ break;
+ case 'w':
+ if ((delay = atoi(optarg)) <= 0)
+ usage(argv[0]);
+ set_cmd_delay("data", delay, 0);
+ break;
+ case 'W':
+ set_cmd_delay_arg(optarg);
+ break;
+ default:
+ usage(argv[0]);
+ }
+ }
+ if (argc - optind != 2)
+ usage(argv[0]);
+ if ((backlog = atoi(argv[optind + 1])) <= 0)
+ usage(argv[0]);
+ if (single_template && shared_template)
+ msg_fatal("use only one of -d or -D, but not both");
+ if (geteuid() == 0 && user_privs == 0)
+ msg_fatal("-u option is required if running as root");
+
+ /*
+ * Initialize.
+ */
+ if (var_myhostname == 0)
+ var_myhostname = "smtp-sink";
+ set_cmds_flags(enable_lmtp ? "lhlo" :
+ disable_esmtp ? "helo" :
+ "helo, ehlo", FLAG_ENABLE);
+ proto_info = inet_proto_init("protocols", protocols);
+ if (strncmp(argv[optind], "unix:", 5) == 0) {
+ sock = unix_listen(argv[optind] + 5, backlog, BLOCKING);
+ } else {
+ if (strncmp(argv[optind], "inet:", 5) == 0)
+ argv[optind] += 5;
+ sock = inet_listen(argv[optind], backlog, BLOCKING);
+ }
+ if (user_privs)
+ chroot_uid(root_dir, user_privs);
+
+ if (single_template)
+ mysrand((int) time((time_t *) 0));
+ else if (shared_template)
+ single_template = shared_template;
+
+ /*
+ * Start the event handler.
+ */
+ event_enable_read(sock, connect_event, (void *) 0);
+ for (;;)
+ event_loop(-1);
+}