diff options
Diffstat (limited to 'docs/source/usage')
| -rw-r--r-- | docs/source/usage/other.rst | 209 | ||||
| -rw-r--r-- | docs/source/usage/shell-prompts.rst | 144 | ||||
| -rw-r--r-- | docs/source/usage/wm-widgets.rst | 102 |
3 files changed, 455 insertions, 0 deletions
diff --git a/docs/source/usage/other.rst b/docs/source/usage/other.rst new file mode 100644 index 0000000..d773484 --- /dev/null +++ b/docs/source/usage/other.rst @@ -0,0 +1,209 @@ +************* +Other plugins +************* + +.. _vim-vimrc: + +Vim statusline +============== + +If installed using pip just add + +.. code-block:: vim + + python from powerline.vim import setup as powerline_setup + python powerline_setup() + python del powerline_setup + +(replace ``python`` with ``python3`` if appropriate) to the :file:`vimrc`. + +.. note:: + Status line will not appear by default when there is only a single window + displayed. Run ``:h 'laststatus'`` in Vim for more information. + +If the repository was just cloned the following line needs to be added to the +:file:`vimrc`: + +.. code-block:: vim + + set rtp+={repository_root}/powerline/bindings/vim + +where ``{repository_root}`` is the absolute path to the Powerline installation +directory (see :ref:`repository root <repository-root>`). + +If pathogen is used and Powerline functionality is not needed outside of Vim +then it is possible to simply add Powerline as a bundle and point the path above +to the Powerline bundle directory, e.g. +:file:`~/.vim/bundle/powerline/powerline/bindings/vim`. + +Vundle and NeoBundle users may instead use + +.. code-block:: vim + + Bundle 'powerline/powerline', {'rtp': 'powerline/bindings/vim/'} + +(NeoBundle users need ``NeoBundle`` in place of ``Bundle``, otherwise setup is +the same). + +Vim-addon-manager setup is even easier because it is not needed to write this +big path or install anything by hand: ``powerline`` can be installed and +activated just like any other plugin using + +.. code-block:: vim + + call vam#ActivateAddons(['powerline']) + +.. warning:: + *Never* install powerline with pathogen/VAM/Vundle/NeoBundle *and* with pip. + If powerline functionality is needed in applications other then Vim then + system-wide installation (in case used OS distribution has powerline + package), pip-only or ``pip install --editable`` kind of installation + performed on the repository installed by Vim plugin manager should be used. + + No issues are accepted in powerline issue tracker for double pip/non-pip + installations, especially if these issues occur after update. + +.. note:: + If supplied :file:`powerline.vim` file is used to load powerline there are + additional configuration variables available: ``g:powerline_pycmd`` and + ``g:powerline_pyeval``. First sets command used to load powerline: expected + values are ``"py"`` and ``"py3"``. Second sets function used in statusline, + expected values are ``"pyeval"`` and ``"py3eval"``. + + If ``g:powerline_pycmd`` is set to the one of the expected values then + ``g:powerline_pyeval`` will be set accordingly. If it is set to some other + value then ``g:powerline_pyeval`` must also be set. Powerline will not check + that Vim is compiled with Python support if ``g:powerline_pycmd`` is set to + an unexpected value. + + These values are to be used to specify the only Python that is to be loaded + if both versions are present: Vim may disable loading one python version if + other was already loaded. They should also be used if two python versions + are able to load simultaneously, but powerline was installed only for + python-3 version. + +Tmux statusline +=============== + +Add the following lines to :file:`.tmux.conf`, where ``{repository_root}`` is +the absolute path to the Powerline installation directory (see :ref:`repository +root <repository-root>`):: + + source "{repository_root}/powerline/bindings/tmux/powerline.conf" + +.. note:: + The availability of the ``powerline-config`` command is required for + powerline support. The location of this script may be specified via + the ``$POWERLINE_CONFIG_COMMAND`` environment variable. + +.. note:: + It is advised to run ``powerline-daemon`` before adding the above line to + tmux.conf. To do so add:: + + run-shell "powerline-daemon -q" + + to :file:`.tmux.conf`. + +.. warning:: + Segments which depend on current working directory (e.g. + :py:func:`powerline.segments.common.vcs.branch`) require also setting up + :ref:`shell bindings <usage-shell>`. It is not required to use powerline + shell prompt, :ref:`components setting <config-ext-components>` allows to + set up only powerline bindings for tmux without altering your prompt. + Without setting up shell bindings powerline will use current working + directory of *tmux server* which is probably not what you need. + + Segments which depend on environment like + :py:func:`powerline.segments.common.env.virtualenv` will not work at all + (i.e. they will use environment of the tmux server), tracking environment + changes is going to slow down shell a lot. + + In any case it is suggested to avoid both kinds of segments in tmux + :ref:`themes <config-themes>` because even support for tracking current + directory is very limited: + + #. It works only in shell. Should you e.g. run Vim and run ``:cd`` there you + will get current working directory from shell. + #. It works only in local shell and requires configuring it. + #. Some shells are not supported at all. + +IPython prompt +============== + +For IPython<0.11 add the following lines to :file:`.ipython/ipy_user_conf.py`: + +.. code-block:: Python + + # top + from powerline.bindings.ipython.pre_0_11 import setup as powerline_setup + + # main() function (assuming ipython was launched without configuration to + # create skeleton ipy_user_conf.py file): + powerline_setup() + +For IPython>=0.11 add the following line to +:file:`~/.ipython/profile_default/ipython_config.py` file in the used profile: + +.. code-block:: Python + + c = get_config() + c.InteractiveShellApp.extensions = [ + 'powerline.bindings.ipython.post_0_11' + ] + +For IPython>=5.0 you may use the above set up, but it is deprecated. It is +suggested to use + +.. code-block:: Python + + from powerline.bindings.ipython.since_5 import PowerlinePrompts + c = get_config() + c.TerminalInteractiveShell.simple_prompt = False + c.TerminalInteractiveShell.prompts_class = PowerlinePrompts + +.. note:: + Setting ``simple_prompt`` to False after IPython-5.0 is required regardless + of whether you use ``c.InteractiveShellApp.extensions`` setting or + ``c.TerminalInteractiveShell.prompts_class``. But you probably already have + this line because IPython is not very useful without it. + +IPython=0.11* is not supported and does not work. IPython<0.10 was not +tested (not installable by pip). + +.. _pdb-prompt: + +PDB prompt +========== + +To use Powerline with PDB prompt you need to use custom class. Inherit your +class from :py:class:`pdb.Pdb` and decorate it with +:py:func:`powerline.bindings.pdb.use_powerline_prompt`: + +.. code-block:: Python + + import pdb + + from powerline.bindings.pdb import use_powerline_prompt + + @use_powerline_prompt + class MyPdb(pdb.Pdb): + pass + + MyPdb.run('some.code.to.debug()') + +. Alternatively you may use + +.. code-block:: bash + + python -mpowerline.bindings.pdb path/to/script.py + +just like you used ``python -m pdb``. + +.. note: + If you are using Python-2.6 you need to use ``python + -mpowerline.bindings.pdb.__main__``, not what is shown above. + +.. warning: + Using PyPy (not PyPy3) forces ASCII-only prompts. In other cases unicode + characters are allowed, even if you use `pdbpp + <https://pypi.python.org/pypi/pdbpp>`_. diff --git a/docs/source/usage/shell-prompts.rst b/docs/source/usage/shell-prompts.rst new file mode 100644 index 0000000..1ddb0a1 --- /dev/null +++ b/docs/source/usage/shell-prompts.rst @@ -0,0 +1,144 @@ +.. _usage-shell: + +************* +Shell prompts +************* + +.. note:: + Powerline daemon is not run automatically by any of my bindings. It is + advised to add + + .. code-block:: bash + + powerline-daemon -q + + before any other powerline-related code in the shell configuration file. + +Bash prompt +=========== + +Add the following line to the :file:`bashrc`, where ``{repository_root}`` is the +absolute path to the Powerline installation directory (see :ref:`repository root +<repository-root>`): + +.. code-block:: bash + + . {repository_root}/powerline/bindings/bash/powerline.sh + +.. note:: + Since without powerline daemon bash bindings are very slow PS2 + (continuation) and PS3 (select) prompts are not set up. Thus it is advised + to use + + .. code-block:: bash + + powerline-daemon -q + POWERLINE_BASH_CONTINUATION=1 + POWERLINE_BASH_SELECT=1 + . {repository_root}/powerline/bindings/bash/powerline.sh + + in the bash configuration file. Without ``POWERLINE_BASH_*`` variables PS2 + and PS3 prompts are computed exactly once at bash startup. + +.. warning:: + At maximum bash continuation PS2 and select PS3 prompts are computed each + time main PS1 prompt is computed. Thus putting e.g. current time into PS2 or + PS3 prompt will not work as expected. + + At minimum they are computed once on startup. + +Zsh prompt +========== + +Add the following line to the :file:`zshrc`, where ``{repository_root}`` is the +absolute path to the Powerline installation directory (see :ref:`repository root +<repository-root>`): + +.. code-block:: bash + + . {repository_root}/powerline/bindings/zsh/powerline.zsh + +Fish prompt +=========== + +Add the following line to :file:`config.fish`, where ``{repository_root}`` is +the absolute path to the Powerline installation directory (see :ref:`repository +root <repository-root>`): + +.. code-block:: bash + + set fish_function_path $fish_function_path "{repository_root}/powerline/bindings/fish" + powerline-setup + +.. warning:: Fish is supported only starting from version 2.1. + +Rcsh prompt +=========== + +Powerline supports Plan9 rc reimplementation *by Byron Rakitzis* packaged by +many \*nix distributions. To use it add + +.. code-block:: bash + + . {repository_root}/powerline/bindings/rc/powerline.rc + +(``{repository_root}`` is the absolute path to the Powerline installation +directory, see :ref:`repository root <repository-root>`) to :file:`rcrc` file +(usually :file:`~/.rcrc`) and make sure ``rc`` is started as a login shell (with +``-l`` argument): otherwise this configuration file is not read. + +.. warning:: + Original Plan9 shell and its \*nix port are not supported because they are + missing ``prompt`` special function (it is being called once before each + non-continuation prompt). Since powerline could not support shell without + this or equivalent feature some other not-so-critical features of that port + were used. + +Busybox (ash), mksh and dash prompt +===================================== + +After launching busybox run the following command: + +.. code-block:: bash + + . {repository_root}/powerline/bindings/shell/powerline.sh + +where ``{repository_root}`` is the absolute path to the Powerline installation +directory (see :ref:`repository root <repository-root>`). + +Mksh users may put this line into ``~/.mkshrc`` file. Dash users may use the +following in ``~/.profile``: + +.. code-block:: bash + + if test "$0" != "${0#dash}" ; then + export ENV={repository_root}/powerline/bindings/shell/powerline.sh + fi + +.. note:: + Dash users that already have ``$ENV`` defined should either put the ``. + …/shell/powerline.sh`` line in the ``$ENV`` file or create a new file which + will source (using ``.`` command) both former ``$ENV`` file and + :file:`powerline.sh` files and set ``$ENV`` to the path of this new file. + +.. warning:: + Mksh users have to set ``$POWERLINE_SHELL_CONTINUATION`` and + ``$POWERLINE_SHELL_SELECT`` to 1 to get PS2 and PS3 (continuation and + select) prompts support respectively: as command substitution is not + performed in these shells for these prompts they are updated once each time + PS1 prompt is displayed which may be slow. + + It is also known that while PS2 and PS3 update is triggered at PS1 update it + is *actually performed* only *next* time PS1 is displayed which means that + PS2 and PS3 prompts will be outdated and may be incorrect for this reason. + + Without these variables PS2 and PS3 prompts will be set once at startup. + This only touches mksh users: busybox and dash both have no such problem. + +.. warning:: + Job count is using some weird hack that uses signals and temporary files for + interprocess communication. It may be wrong sometimes. Not the case in mksh. + +.. warning:: + Busybox has two shells: ``ash`` and ``hush``. Second is known to segfault in + busybox 1.22.1 when using :file:`powerline.sh` script. diff --git a/docs/source/usage/wm-widgets.rst b/docs/source/usage/wm-widgets.rst new file mode 100644 index 0000000..204c008 --- /dev/null +++ b/docs/source/usage/wm-widgets.rst @@ -0,0 +1,102 @@ +********************** +Window manager widgets +********************** + +Awesome widget +============== + +.. note:: Powerline currently only supports awesome 3.5 and 4+. + +.. note:: The Powerline widget will spawn a shell script that runs in the + background and updates the statusline with ``awesome-client``. + +Add the following to :file:`rc.lua`, where ``{repository_root}`` is the absolute +path to Powerline installation directory (see :ref:`repository root +<repository-root>`): + +.. code-block:: lua + + package.path = package.path .. ';{repository_root}/powerline/bindings/awesome/?.lua' + require('powerline') + +Then add the ``powerline_widget`` to ``wibox``: + +.. code-block:: lua + + -- awesome3.5 + right_layout:add(powerline_widget) + + -- awesome4+ + s.mywibox:setup { + ... + { -- Right widgets + ... + powerline_widget, + }, + } + +Qtile widget +============ + +Add the following to :file:`~/.config/qtile/config.py`: + +.. code-block:: python + + from libqtile.bar import Bar + from libqtile.config import Screen + from libqtile.widget import Spacer + + from powerline.bindings.qtile.widget import PowerlineTextBox + + screens = [ + Screen( + top=Bar([ + PowerlineTextBox(update_interval=2, side='left'), + Spacer(), + PowerlineTextBox(update_interval=2, side='right'), + ], + 35 # width + ), + ), + ] + +.. _lemonbar-usage: + +lemonbar (formerly bar-aint-recursive) +====================================== + +To run the bar simply start the binding script: + + python /path/to/powerline/bindings/lemonbar/powerline-lemonbar.py + +You can specify options to be passed to ``lemonbar`` after ``--``, like so: + + python /path/to/powerline/bindings/lemonbar/powerline-lemonbar.py --height 16 -- -f "Source Code Pro for Powerline-9" + +to run with i3, simply ``exec`` this in the i3 config file and set the ``--i3`` switch: + + exec python /path/to/powerline/bindings/lemonbar/powerline-lemonbar.py --i3 + +Running the binding in i3-mode will require `i3ipc <https://github.com/acrisci/i3ipc-python>`_ +(or the outdated `i3-py <https://github.com/ziberna/i3-py>`_). + +See the `lemonbar documentation <https://github.com/LemonBoy/bar>`_ for more +information and options. + +All ``powerline-lemonbar.py`` arguments: + +.. automan:: powerline.commands.lemonbar + :prog: powerline-lemonbar.py + :minimal: true + +I3 bar +====== + +Add the following to :file:`~/.config/i3/config`:: + + bar { + status_command python /path/to/powerline/bindings/i3/powerline-i3.py + font pango:PowerlineFont 12 + } + +where ``PowerlineFont`` is any system font with powerline support. |