summaryrefslogtreecommitdiffstats
path: root/docs/AUTOMATIC_BOOT_ASSESSMENT.md
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-05-06 02:25:50 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-05-06 02:25:50 +0000
commit19f4f86bfed21c5326ed2acebe1163f3a83e832b (patch)
treed59b9989ce55ed23693e80974d94c856f1c2c8b1 /docs/AUTOMATIC_BOOT_ASSESSMENT.md
parentInitial commit. (diff)
downloadsystemd-19f4f86bfed21c5326ed2acebe1163f3a83e832b.tar.xz
systemd-19f4f86bfed21c5326ed2acebe1163f3a83e832b.zip
Adding upstream version 241.upstream/241upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'docs/AUTOMATIC_BOOT_ASSESSMENT.md')
-rw-r--r--docs/AUTOMATIC_BOOT_ASSESSMENT.md207
1 files changed, 207 insertions, 0 deletions
diff --git a/docs/AUTOMATIC_BOOT_ASSESSMENT.md b/docs/AUTOMATIC_BOOT_ASSESSMENT.md
new file mode 100644
index 0000000..6f7182a
--- /dev/null
+++ b/docs/AUTOMATIC_BOOT_ASSESSMENT.md
@@ -0,0 +1,207 @@
+---
+title: Automatic Boot Assessment
+---
+
+# Automatic Boot Assessment
+
+systemd provides support for automatically reverting back to the previous
+version of the OS or kernel in case the system consistently fails to boot. This
+support is built into various of its components. When used together these
+components provide a complete solution on UEFI systems, built as add-on to the
+[Boot Loader
+Specification](https://systemd.io/BOOT_LOADER_SPECIFICATION). However, the
+different components may also be used independently, and in combination with
+other software, to implement similar schemes, for example with other boot
+loaders or for non-UEFI systems. Here's a brief overview of the complete set of
+components:
+
+* The
+ [`systemd-boot(7)`](https://www.freedesktop.org/software/systemd/man/systemd-boot.html)
+ boot loader optionally maintains a per-boot-loader-entry counter that is
+ decreased by one on each attempt to boot the entry, prioritizing entries that
+ have non-zero counters over those which already reached a counter of zero
+ when choosing the entry to boot.
+
+* The
+ [`systemd-bless-boot.service(8)`](https://www.freedesktop.org/software/systemd/man/systemd-bless-boot.service.html)
+ service automatically marks a boot loader entry, for which boot counting as
+ mentioned above is enabled, as "good" when a boot has been determined to be
+ successful, thus turning off boot counting for it.
+
+* The
+ [`systemd-bless-boot-generator(8)`](https://www.freedesktop.org/software/systemd/man/systemd-bless-boot-generator.html)
+ generator automatically pulls in `systemd-bless-boot.service` when use of
+ `systemd-boot` with boot counting enabled is detected.
+
+* The
+ [`systemd-boot-check-no-failures.service(8)`](https://www.freedesktop.org/software/systemd/man/systemd-boot-check-no-failures.service.html)
+ service is a simple health check tool that determines whether the boot
+ completed successfully. When enabled it becomes an indirect dependency of
+ `systemd-bless-boot.service` (by means of `boot-complete.target`, see
+ below), ensuring that the boot will not be considered successful if there are
+ any failed services.
+
+* The `boot-complete.target` target unit (see
+ [`systemd.special(7)`](https://www.freedesktop.org/software/systemd/man/systemd.special.html))
+ serves as a generic extension point both for units that shall be considered
+ necessary to consider a boot successful on one side (example:
+ `systemd-boot-check-no-failures.service` as described above), and units that
+ want to act only if the boot is successful on the other (example:
+ `systemd-bless-boot.service` as described above).
+
+* The
+ [`kernel-install(8)`](https://www.freedesktop.org/software/systemd/man/kernel-install.html)
+ script can optionally create boot loader entries that carry an initial boot
+ counter (the initial counter is configurable in `/etc/kernel/tries`).
+
+# Details
+
+The boot counting data `systemd-boot` and `systemd-bless-boot.service`
+manage is stored in the name of the boot loader entries. If a boot loader entry
+file name contains `+` followed by one or two numbers (if two numbers, then
+those need to be separated by `-`) right before the `.conf` suffix, then boot
+counting is enabled for it. The first number is the "tries left" counter
+encoding how many attempts to boot this entry shall still be made. The second
+number is the "tries done" counter, encoding how many failed attempts to boot
+it have already been made. Each time a boot loader entry marked this way is
+booted the first counter is decreased by one, and the second one increased by
+one. (If the second counter is missing, then it is assumed to be equivalent to
+zero.) If the "tries left" counter is above zero the entry is still considered
+for booting (the entry's state is considered to be "indeterminate"), as soon as
+it reached zero the entry is not tried anymore (entry state "bad"). If the boot
+attempt completed successfully the entry's counters are removed from the name
+(entry state "good"), thus turning off boot counting for the future.
+
+## Walkthrough
+
+Here's an example walkthrough of how this all fits together.
+
+1. The user runs `echo 3 > /etc/kernel/tries` to enable boot counting.
+
+2. A new kernel is installed. `kernel-install` is used to generate a new boot
+ loader entry file for it. Let's say the version string for the new kernel is
+ `4.14.11-300.fc27.x86_64`, a new boot loader entry
+ `/boot/loader/entries/4.14.11-300.fc27.x86_64+3.conf` is hence created.
+
+3. The system is booted for the first time after the new kernel is
+ installed. The boot loader now sees the `+3` counter in the entry file
+ name. It hence renames the file to `4.14.11-300.fc27.x86_64+2-1.conf`
+ indicating that at this point one attempt has started and thus only one less
+ is left. After the rename completed the entry is booted as usual.
+
+4. Let's say this attempt to boot fails. On the following boot the boot loader
+ will hence see the `+2-1` tag in the name, and hence rename the entry file to
+ `4.14.11-300.fc27.x86_64+1-2.conf`, and boot it.
+
+5. Let's say the boot fails again. On the subsequent boot the loader hence will
+ see the `+1-2` tag, and rename the file to
+ `4.14.11-300.fc27.x86_64+0-3.conf` and boot it.
+
+6. If this boot also fails, on the next boot the boot loader will see the the
+ tag `+0-3`, i.e. the counter reached zero. At this point the entry will be
+ considered "bad", and ordered to the end of the list of entries. The next
+ newest boot entry is now tried, i.e. the system automatically reverted back
+ to an earlier version.
+
+The above describes the walkthrough when the selected boot entry continuously
+fails. Let's have a look at an alternative ending to this walkthrough. In this
+scenario the first 4 steps are the same as above:
+
+1. *as above*
+
+2. *as above*
+
+3. *as above*
+
+4. *as above*
+
+5. Let's say the second boot succeeds. The kernel initializes properly, systemd
+ is started and invokes all generators.
+
+6. One of the generators started is `systemd-bless-boot-generator` which
+ detects that boot counting is used. It hence pulls
+ `systemd-bless-boot.service` into the initial transaction.
+
+7. `systemd-bless-boot.service` is ordered after and `Requires=` the generic
+ `boot-complete.target` unit. This unit is hence also pulled into the initial
+ transaction.
+
+8. The `boot-complete.target` unit is ordered after and pulls in various units
+ that are required to succeed for the boot process to be considered
+ successful. One such unit is `systemd-boot-check-no-failures.service`.
+
+9. `systemd-boot-check-no-failures.service` is run after all its own
+ dependencies completed, and assesses that the boot completed
+ successfully. It hence exits cleanly.
+
+10. This allows `boot-complete.target` to be reached. This signifies to the
+ system that this boot attempt shall be considered successful.
+
+11. Which in turn permits `systemd-bless-boot.service` to run. It now
+ determines which boot loader entry file was used to boot the system, and
+ renames it dropping the counter tag. Thus
+ `4.14.11-300.fc27.x86_64+1-2.conf` is renamed to
+ `4.14.11-300.fc27.x86_64.conf`. From this moment boot counting is turned
+ off.
+
+12. On the following boot (and all subsequent boots after that) the entry is
+ now seen with boot counting turned off, no further renaming takes place.
+
+# How to adapt this scheme to other setups
+
+Of the stack described above many components may be replaced or augmented. Here
+are a couple of recommendations.
+
+1. To support alternative boot loaders in place of `systemd-boot` two scenarios
+ are recommended:
+
+ a. Boot loaders already implementing the Boot Loader Specification can simply
+ implement an equivalent file rename based logic, and thus integrate fully
+ with the rest of the stack.
+
+ b. Boot loaders that want to implement boot counting and store the counters
+ elsewhere can provide their own replacements for
+ `systemd-bless-boot.service` and `systemd-bless-boot-generator`, but should
+ continue to use `boot-complete.target` and thus support any services
+ ordered before that.
+
+2. To support additional components that shall succeed before the boot is
+ considered successful, simply place them in units (if they aren't already)
+ and order them before the generic `boot-complete.target` target unit,
+ combined with `Requires=` dependencies from the target, so that the target
+ cannot be reached when any of the units fail. You may add any number of
+ units like this, and only if they all succeed the boot entry is marked as
+ good. Note that the target unit shall pull in these boot checking units, not
+ the other way around.
+
+3. To support additional components that shall only run on boot success, simply
+ wrap them in a unit and order them after `boot-complete.target`, pulling it
+ in.
+
+# FAQ
+
+1. *Why do you use file renames to store the counter? Why not a regular file?*
+ — Mainly two reasons: it's relatively likely that renames can be implemented
+ atomically even in simpler file systems, while writing to file contents has
+ a much bigger chance to be result in incomplete or corrupt data, as renaming
+ generally avoids allocating or releasing data blocks. Moreover it has the
+ benefit that the boot count metadata is directly attached to the boot loader
+ entry file, and thus the lifecycle of the metadata and the entry itself are
+ bound together. This means no additional clean-up needs to take place to
+ drop the boot loader counting information for an entry when it is removed.
+
+2. *Why not use EFI variables for storing the boot counter?* — The memory chips
+ used to back the persistent EFI variables are generally not of the highest
+ quality, hence shouldn't be written to more than necessary. This means we
+ can't really use it for changes made regularly during boot, but can use it
+ only for seldom made configuration changes.
+
+3. *I have a service which — when it fails — should immediately cause a
+ reboot. How does that fit in with the above?* — Well, that's orthogonal to
+ the above, please use `FailureAction=` in the unit file for this.
+
+4. *Under some condition I want to mark the current boot loader entry as bad
+ right-away, so that it never is tried again, how do I do that?* — You may
+ invoke `/usr/lib/systemd/systemd-bless-boot bad` at any time to mark the
+ current boot loader entry as "bad" right-away so that it isn't tried again
+ on later boots.