Adding upstream version 6.0.4-dfsg.upstream/6.0.4-dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 287 insertions, 0 deletions

diff --git a/include/iprt/condvar.h b/include/iprt/condvar.h
new file mode 100644
index 00000000..3d081945
--- /dev/null
+++ b/include/iprt/condvar.h
@@ -0,0 +1,287 @@
+/** @file
+ * IPRT - Condition Variable.
+ */
+
+/*
+ * Copyright (C) 2006-2019 Oracle Corporation
+ *
+ * This file is part of VirtualBox Open Source Edition (OSE), as
+ * available from http://www.virtualbox.org. This file is free software;
+ * you can redistribute it and/or modify it under the terms of the GNU
+ * General Public License (GPL) as published by the Free Software
+ * Foundation, in version 2 as it comes in the "COPYING" file of the
+ * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
+ * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
+ *
+ * The contents of this file may alternatively be used under the terms
+ * of the Common Development and Distribution License Version 1.0
+ * (CDDL) only, as it comes in the "COPYING.CDDL" file of the
+ * VirtualBox OSE distribution, in which case the provisions of the
+ * CDDL are applicable instead of those of the GPL.
+ *
+ * You may elect to license modified versions of this file under the
+ * terms and conditions of either the GPL or the CDDL or both.
+ */
+
+#ifndef IPRT_INCLUDED_condvar_h
+#define IPRT_INCLUDED_condvar_h
+#ifndef RT_WITHOUT_PRAGMA_ONCE
+# pragma once
+#endif
+
+#include <iprt/cdefs.h>
+#include <iprt/types.h>
+#if defined(RT_LOCK_STRICT_ORDER) && defined(IN_RING3)
+# include <iprt/lockvalidator.h>
+#endif
+
+
+RT_C_DECLS_BEGIN
+
+/** @defgroup grp_rt_condvar    RTCondVar - Condition Variable
+ *
+ * Condition variables combines mutex semaphore or critical sections with event
+ * semaphores.  See @ref grp_rt_sems_mutex, @ref grp_rt_critsect,
+ * @ref grp_rt_sems_event and @ref grp_rt_sems_event_multi.
+ *
+ * @ingroup grp_rt
+ * @{
+ */
+
+
+/**
+ * Create a condition variable.
+ *
+ * @returns iprt status code.
+ * @param   phCondVar           Where to store the handle to the newly created
+ *                              condition variable.
+ */
+RTDECL(int)  RTCondVarCreate(PRTCONDVAR phCondVar);
+
+/**
+ * Create a condition variable.
+ *
+ * @returns iprt status code.
+ * @param   phCondVar           Where to store the handle to the newly created
+ *                              condition variable.
+ * @param   fFlags              Flags, any combination of the
+ *                              RTCONDVAR_FLAGS_XXX \#defines.
+ * @param   hClass              The class (no reference consumed).  Since we
+ *                              don't do order checks on condition variables,
+ *                              the use of the class is limited to controlling
+ *                              the timeout threshold for deadlock detection.
+ * @param   pszNameFmt          Name format string for the lock validator,
+ *                              optional (NULL).  Max length is 32 bytes.
+ * @param   ...                 Format string arguments.
+ */
+RTDECL(int)  RTCondVarCreateEx(PRTCONDVAR phCondVar, uint32_t fFlags, RTLOCKVALCLASS hClass,
+                               const char *pszNameFmt, ...) RT_IPRT_FORMAT_ATTR(4, 5);
+
+/** @name RTCondVarCreateEx flags
+ * @{ */
+/** Disables lock validation. */
+#define RTCONDVAR_FLAGS_NO_LOCK_VAL     UINT32_C(0x00000001)
+/** @} */
+
+/**
+ * Destroy a condition variable.
+ *
+ * @returns iprt status code.
+ * @param   hCondVar            Handle of the condition variable.  NIL_RTCONDVAR
+ *                              is quietly ignored (VINF_SUCCESS).
+ */
+RTDECL(int)  RTCondVarDestroy(RTCONDVAR hCondVar);
+
+/**
+ * Signal the condition variable, waking up exactly one thread.
+ *
+ * It is recommended that the caller holds the associated lock, but this is not
+ * strictly speaking necessary.
+ *
+ * If no threads are waiting on the condition variable, the call will have no
+ * effect on the variable.
+ *
+ * @returns iprt status code.
+ * @param   hCondVar            The condition variable to signal.
+ */
+RTDECL(int)  RTCondVarSignal(RTCONDVAR hCondVar);
+
+/**
+ * Signal the condition variable, waking up all blocked threads.
+ *
+ * It is recommended that the caller holds the associated lock, but this is not
+ * strictly speaking necessary.
+ *
+ * If no threads are waiting on the condition variable, the call will have no
+ * effect on the variable.
+ *
+ * @returns iprt status code.
+ * @param   hCondVar            The condition variable to broadcast.
+ */
+RTDECL(int)  RTCondVarBroadcast(RTCONDVAR hCondVar);
+
+/**
+ * Wait for the condition variable to be signaled, resume on interruption.
+ *
+ * This function will resume if the wait is interrupted by an async system event
+ * (like a unix signal) or similar.
+ *
+ * @returns iprt status code.
+ *          Will not return VERR_INTERRUPTED.
+ * @param   hCondVar            The condition variable to wait on.
+ * @param   hMtx                The mutex to leave during the wait and which
+ *                              will be re-enter before returning.
+ * @param   cMillies            Number of milliseconds to wait.  Use
+ *                              RT_INDEFINITE_WAIT to wait forever.
+ */
+RTDECL(int)  RTCondVarMutexWait(RTCONDVAR hCondVar, RTSEMMUTEX hMtx, RTMSINTERVAL cMillies);
+
+/**
+ * Wait for the condition variable to be signaled, return on interruption.
+ *
+ * This function will not resume the wait if interrupted.
+ *
+ * @returns iprt status code.
+ * @param   hCondVar            The condition variable to wait on.
+ * @param   hMtx                The mutex to leave during the wait and which
+ *                              will be re-enter before returning.
+ * @param   cMillies            Number of milliseconds to wait.  Use
+ *                              RT_INDEFINITE_WAIT to wait forever.
+ */
+RTDECL(int)  RTCondVarMutexWaitNoResume(RTCONDVAR hCondVar, RTSEMMUTEX hMtx, RTMSINTERVAL cMillies);
+
+/**
+ * Wait for the condition variable to be signaled, resume on interruption.
+ *
+ * This function will resume if the wait is interrupted by an async system event
+ * (like a unix signal) or similar.
+ *
+ * @returns iprt status code.
+ *          Will not return VERR_INTERRUPTED.
+ * @param   hCondVar            The condition variable to wait on.
+ * @param   hRWSem              The read/write semaphore to write-leave during
+ *                              the wait and which will be re-enter in write
+ *                              mode before returning.
+ * @param   cMillies            Number of milliseconds to wait.  Use
+ *                              RT_INDEFINITE_WAIT to wait forever.
+ */
+RTDECL(int)  RTCondVarRWWriteWait(RTCONDVAR hCondVar, RTSEMRW hRWSem, RTMSINTERVAL cMillies);
+
+/**
+ * Wait for the condition variable to be signaled, return on interruption.
+ *
+ * This function will not resume the wait if interrupted.
+ *
+ * @returns iprt status code.
+ * @param   hCondVar            The condition variable to wait on.
+ * @param   hRWSem              The read/write semaphore to write-leave during
+ *                              the wait and which will be re-enter in write
+ *                              mode before returning.
+ * @param   cMillies            Number of milliseconds to wait.  Use
+ *                              RT_INDEFINITE_WAIT to wait forever.
+ */
+RTDECL(int)  RTCondVarRWWriteWaitNoResume(RTCONDVAR hCondVar, RTSEMRW hRWSem, RTMSINTERVAL cMillies);
+
+/**
+ * Wait for the condition variable to be signaled, resume on interruption.
+ *
+ * This function will resume if the wait is interrupted by an async system event
+ * (like a unix signal) or similar.
+ *
+ * @returns iprt status code.
+ *          Will not return VERR_INTERRUPTED.
+ * @param   hCondVar            The condition variable to wait on.
+ * @param   hRWSem              The read/write semaphore to read-leave during
+ *                              the wait and which will be re-enter in read mode
+ *                              before returning.
+ * @param   cMillies            Number of milliseconds to wait.  Use
+ *                              RT_INDEFINITE_WAIT to wait forever.
+ */
+RTDECL(int)  RTCondVarRWReadWait(RTCONDVAR hCondVar, RTSEMRW hRWSem, RTMSINTERVAL cMillies);
+
+/**
+ * Wait for the condition variable to be signaled, return on interruption.
+ *
+ * This function will not resume the wait if interrupted.
+ *
+ * @returns iprt status code.
+ * @param   hCondVar            The condition variable to wait on.
+ * @param   hRWSem              The read/write semaphore to read-leave during
+ *                              the wait and which will be re-enter in read mode
+ *                              before returning.
+ * @param   cMillies            Number of milliseconds to wait.  Use
+ *                              RT_INDEFINITE_WAIT to wait forever.
+ */
+RTDECL(int)  RTCondVarRWReadWaitNoResume(RTCONDVAR hCondVar, RTSEMRW hRWSem, RTMSINTERVAL cMillies);
+
+/**
+ * Wait for the condition variable to be signaled, resume on interruption.
+ *
+ * This function will resume if the wait is interrupted by an async system event
+ * (like a unix signal) or similar.
+ *
+ * @returns iprt status code.
+ *          Will not return VERR_INTERRUPTED.
+ * @param   hCondVar            The condition variable to wait on.
+ * @param   pCritSect           The critical section to leave during the wait
+ *                              and which will be re-enter before returning.
+ * @param   cMillies            Number of milliseconds to wait.  Use
+ *                              RT_INDEFINITE_WAIT to wait forever.
+ */
+RTDECL(int)  RTCondVarCritSectWait(RTCONDVAR hCondVar, PRTCRITSECT pCritSect, RTMSINTERVAL cMillies);
+
+/**
+ * Wait for the condition variable to be signaled, return on interruption.
+ *
+ * This function will not resume the wait if interrupted.
+ *
+ * @returns iprt status code.
+ * @param   hCondVar            The condition variable to wait on.
+ * @param   pCritSect           The critical section to leave during the wait
+ *                              and which will be re-enter before returning.
+ * @param   cMillies            Number of milliseconds to wait.  Use
+ *                              RT_INDEFINITE_WAIT to wait forever.
+ */
+RTDECL(int)  RTCondVarCritSectWaitNoResume(RTCONDVAR hCondVar, PRTCRITSECT pCritSect, RTMSINTERVAL cMillies);
+
+/**
+ * Sets the signaller thread to one specific thread.
+ *
+ * This is only used for validating usage and deadlock detection.  When used
+ * after calls to RTCondVarAddSignaller, the specified thread will be the only
+ * signalling thread.
+ *
+ * @param   hCondVar            The condition variable.
+ * @param   hThread             The thread that will signal it.  Pass
+ *                              NIL_RTTHREAD to indicate that there is no
+ *                              special signalling thread.
+ */
+RTDECL(void) RTCondVarSetSignaller(RTCONDVAR hCondVar, RTTHREAD hThread);
+
+/**
+ * To add more signalling threads.
+ *
+ * First call RTCondVarSetSignaller then add further threads with this.
+ *
+ * @param   hCondVar            The condition variable.
+ * @param   hThread             The thread that will signal it. NIL_RTTHREAD is
+ *                              not accepted.
+ */
+RTDECL(void) RTCondVarAddSignaller(RTCONDVAR hCondVar, RTTHREAD hThread);
+
+/**
+ * To remove a signalling thread.
+ *
+ * Reverts work done by RTCondVarAddSignaller and RTCondVarSetSignaller.
+ *
+ * @param   hCondVar            The condition variable.
+ * @param   hThread             A previously added thread.
+ */
+RTDECL(void) RTCondVarRemoveSignaller(RTCONDVAR hCondVar, RTTHREAD hThread);
+
+/** @} */
+
+RT_C_DECLS_END
+
+#endif /* !IPRT_INCLUDED_condvar_h */
+