Adding upstream version 6.0.4-dfsg.upstream/6.0.4-dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 255 insertions, 0 deletions

diff --git a/include/iprt/poll.h b/include/iprt/poll.h
new file mode 100644
index 00000000..c5981744
--- /dev/null
+++ b/include/iprt/poll.h
@@ -0,0 +1,255 @@
+/** @file
+ * IPRT - Polling I/O Handles.
+ */
+
+/*
+ * Copyright (C) 2010-2019 Oracle Corporation
+ *
+ * This file is part of VirtualBox Open Source Edition (OSE), as
+ * available from http://www.virtualbox.org. This file is free software;
+ * you can redistribute it and/or modify it under the terms of the GNU
+ * General Public License (GPL) as published by the Free Software
+ * Foundation, in version 2 as it comes in the "COPYING" file of the
+ * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
+ * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
+ *
+ * The contents of this file may alternatively be used under the terms
+ * of the Common Development and Distribution License Version 1.0
+ * (CDDL) only, as it comes in the "COPYING.CDDL" file of the
+ * VirtualBox OSE distribution, in which case the provisions of the
+ * CDDL are applicable instead of those of the GPL.
+ *
+ * You may elect to license modified versions of this file under the
+ * terms and conditions of either the GPL or the CDDL or both.
+ */
+
+#ifndef IPRT_INCLUDED_poll_h
+#define IPRT_INCLUDED_poll_h
+#ifndef RT_WITHOUT_PRAGMA_ONCE
+# pragma once
+#endif
+
+#include <iprt/cdefs.h>
+#include <iprt/types.h>
+
+RT_C_DECLS_BEGIN
+
+/** @defgroup grp_rt_poll      RTPoll - Polling I/O Handles
+ * @ingroup grp_rt
+ * @{
+ */
+
+/** @name Poll events
+ * @{ */
+/** Readable without blocking. */
+#define RTPOLL_EVT_READ         RT_BIT_32(0)
+/** Writable without blocking. */
+#define RTPOLL_EVT_WRITE        RT_BIT_32(1)
+/** Error condition, hangup, exception or similar. */
+#define RTPOLL_EVT_ERROR        RT_BIT_32(2)
+/** Mask of the valid bits. */
+#define RTPOLL_EVT_VALID_MASK   UINT32_C(0x00000007)
+/** @} */
+
+/**
+ * Polls on the specified poll set until an event occurs on one of the handles
+ * or the timeout expires.
+ *
+ * @returns IPRT status code.
+ * @retval  VINF_SUCCESS if an event occurred on a handle.  Note that these
+ * @retval  VERR_INVALID_HANDLE if @a hPollSet is invalid.
+ * @retval  VERR_CONCURRENT_ACCESS if another thread is already accessing the set. The
+ *          user is responsible for ensuring single threaded access.
+ * @retval  VERR_TIMEOUT if @a cMillies ellapsed without any events.
+ * @retval  VERR_DEADLOCK if @a cMillies is set to RT_INDEFINITE_WAIT and there
+ *          are no valid handles in the set.
+ *
+ * @param   hPollSet            The set to poll on.
+ * @param   cMillies            Number of milliseconds to wait.  Use
+ *                              RT_INDEFINITE_WAIT to wait for ever.
+ * @param   pfEvents            Where to return details about the events that
+ *                              occurred.  Optional.
+ * @param   pid                 Where to return the ID associated with the
+ *                              handle when calling RTPollSetAdd.  Optional.
+ *
+ * @sa      RTPollNoResume
+ *
+ * @remarks The caller is responsible for ensuring
+ */
+RTDECL(int) RTPoll(RTPOLLSET hPollSet, RTMSINTERVAL cMillies, uint32_t *pfEvents, uint32_t *pid);
+
+/**
+ * Same as RTPoll except that it will return when interrupted.
+ *
+ * @returns IPRT status code.
+ * @retval  VINF_SUCCESS if an event occurred on a handle.  Note that these
+ * @retval  VERR_INVALID_HANDLE if @a hPollSet is invalid.
+ * @retval  VERR_CONCURRENT_ACCESS if another thread is already accessing the set. The
+ *          user is responsible for ensuring single threaded access.
+ * @retval  VERR_TIMEOUT if @a cMillies ellapsed without any events.
+ * @retval  VERR_DEADLOCK if @a cMillies is set to RT_INDEFINITE_WAIT and there
+ *          are no valid handles in the set.
+ * @retval  VERR_INTERRUPTED if a signal or other asynchronous event interrupted
+ *          the polling.
+ *
+ * @param   hPollSet            The set to poll on.
+ * @param   cMillies            Number of milliseconds to wait.  Use
+ *                              RT_INDEFINITE_WAIT to wait for ever.
+ * @param   pfEvents            Where to return details about the events that
+ *                              occurred.  Optional.
+ * @param   pid                 Where to return the ID associated with the
+ *                              handle when calling RTPollSetAdd.  Optional.
+ */
+RTDECL(int) RTPollNoResume(RTPOLLSET hPollSet, RTMSINTERVAL cMillies, uint32_t *pfEvents, uint32_t *pid);
+
+/**
+ * Creates a poll set with no members.
+ *
+ * @returns IPRT status code.
+ * @param   phPollSet           Where to return the poll set handle.
+ */
+RTDECL(int)  RTPollSetCreate(PRTPOLLSET phPollSet);
+
+/**
+ * Destroys a poll set.
+ *
+ * @returns IPRT status code.
+ * @param   hPollSet            The poll set to destroy.  NIL_POLLSET is quietly
+ *                              ignored (VINF_SUCCESS).
+ */
+RTDECL(int)  RTPollSetDestroy(RTPOLLSET hPollSet);
+
+/**
+ * Adds a generic handle to the poll set.
+ *
+ * If a handle is entered more than once, it is recommended to add the one with
+ * RTPOLL_EVT_ERROR first to ensure that you get the right ID back when an error
+ * actually occurs.  On some hosts it is possible that polling for
+ * RTPOLL_EVT_READ on a socket may cause it to return error conditions because
+ * the two cannot so easily be distinguished.
+ *
+ * Also note that RTPOLL_EVT_ERROR may be returned by RTPoll even if not asked
+ * for.
+ *
+ * @returns IPRT status code
+ * @retval  VERR_CONCURRENT_ACCESS if another thread is already accessing the set. The
+ *          user is responsible for ensuring single threaded access.
+ * @retval  VERR_POLL_HANDLE_NOT_POLLABLE if the specified handle is not
+ *          pollable.
+ * @retval  VERR_POLL_HANDLE_ID_EXISTS if the handle ID is already in use in the
+ *          set.
+ *
+ * @param   hPollSet            The poll set to modify.
+ * @param   pHandle             The handle to add.  NIL handles are quietly
+ *                              ignored.
+ * @param   fEvents             Which events to poll for.
+ * @param   id                  The handle ID.
+ */
+RTDECL(int) RTPollSetAdd(RTPOLLSET hPollSet, PCRTHANDLE pHandle, uint32_t fEvents, uint32_t id);
+
+/**
+ * Removes a generic handle from the poll set.
+ *
+ * @returns IPRT status code
+ * @retval  VERR_INVALID_HANDLE if @a hPollSet not valid.
+ * @retval  VERR_CONCURRENT_ACCESS if another thread is already accessing the set. The
+ *          user is responsible for ensuring single threaded access.
+ * @retval  VERR_POLL_HANDLE_ID_NOT_FOUND if @a id doesn't resolve to a valid
+ *          handle.
+ *
+ * @param   hPollSet            The poll set to modify.
+ * @param   id                  The handle ID of the handle that should be
+ *                              removed.
+ */
+RTDECL(int) RTPollSetRemove(RTPOLLSET hPollSet, uint32_t id);
+
+
+/**
+ * Query a handle in the poll set by it's ID.
+ *
+ * @returns IPRT status code
+ * @retval  VINF_SUCCESS if the handle was found.  @a *pHandle is set.
+ * @retval  VERR_INVALID_HANDLE if @a hPollSet is invalid.
+ * @retval  VERR_CONCURRENT_ACCESS if another thread is already accessing the set. The
+ *          user is responsible for ensuring single threaded access.
+ * @retval  VERR_POLL_HANDLE_ID_NOT_FOUND if there is no handle with that ID.
+ *
+ * @param   hPollSet            The poll set to query.
+ * @param   id                  The ID of the handle.
+ * @param   pHandle             Where to return the handle details.  Optional.
+ */
+RTDECL(int) RTPollSetQueryHandle(RTPOLLSET hPollSet, uint32_t id, PRTHANDLE pHandle);
+
+/**
+ * Gets the number of handles in the set.
+ *
+ * @retval  The handle count.
+ * @retval  UINT32_MAX if @a hPollSet is invalid or there is concurrent access.
+ *
+ * @param   hPollSet            The poll set.
+ */
+RTDECL(uint32_t) RTPollSetGetCount(RTPOLLSET hPollSet);
+
+/**
+ * Modifies the events to poll for for the given id.
+ *
+ * @returns IPRT status code.
+ * @retval  VERR_INVALID_HANDLE if @a hPollSet not valid.
+ * @retval  VERR_CONCURRENT_ACCESS if another thread is already accessing the set. The
+ *          user is responsible for ensuring single threaded access.
+ * @retval  VERR_POLL_HANDLE_ID_NOT_FOUND if @a id doesn't resolve to a valid
+ *          handle.
+ *
+ * @param   hPollSet            The poll set to modify.
+ * @param   id                  The handle ID to change the events for.
+ * @param   fEvents             Which events to poll for.
+ */
+RTDECL(int) RTPollSetEventsChange(RTPOLLSET hPollSet, uint32_t id, uint32_t fEvents);
+
+/**
+ * Adds a pipe handle to the set.
+ *
+ * @returns See RTPollSetAdd.
+ *
+ * @param   hPollSet            The poll set.
+ * @param   hPipe               The pipe handle.
+ * @param   fEvents             Which events to poll for.
+ * @param   id                  The handle ID.
+ *
+ * @todo    Maybe we could figure out what to poll for depending on the kind of
+ *          pipe we're dealing with.
+ */
+DECLINLINE(int) RTPollSetAddPipe(RTPOLLSET hPollSet, RTPIPE hPipe, uint32_t fEvents, uint32_t id)
+{
+    RTHANDLE Handle;
+    Handle.enmType = RTHANDLETYPE_PIPE;
+    Handle.u.uInt  = 0;
+    Handle.u.hPipe = hPipe;
+    return RTPollSetAdd(hPollSet, &Handle, fEvents, id);
+}
+
+/**
+ * Adds a socket handle to the set.
+ *
+ * @returns See RTPollSetAdd.
+ *
+ * @param   hPollSet            The poll set.
+ * @param   hSocket             The socket handle.
+ * @param   fEvents             Which events to poll for.
+ * @param   id                  The handle ID.
+ */
+DECLINLINE(int) RTPollSetAddSocket(RTPOLLSET hPollSet, RTSOCKET hSocket, uint32_t fEvents, uint32_t id)
+{
+    RTHANDLE Handle;
+    Handle.enmType   = RTHANDLETYPE_SOCKET;
+    Handle.u.uInt    = 0;
+    Handle.u.hSocket = hSocket;
+    return RTPollSetAdd(hPollSet, &Handle, fEvents, id);
+}
+
+/** @} */
+
+RT_C_DECLS_END
+
+#endif /* !IPRT_INCLUDED_poll_h */
+