Adding upstream version 6.0.4-dfsg.upstream/6.0.4-dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 367 insertions, 0 deletions

diff --git a/include/iprt/serialport.h b/include/iprt/serialport.h
new file mode 100644
index 00000000..0a73a771
--- /dev/null
+++ b/include/iprt/serialport.h
@@ -0,0 +1,367 @@
+/** @file
+ * IPRT Serial Port API.
+ */
+
+/*
+ * Copyright (C) 2017-2019 Oracle Corporation
+ *
+ * This file is part of VirtualBox Open Source Edition (OSE), as
+ * available from http://www.virtualbox.org. This file is free software;
+ * you can redistribute it and/or modify it under the terms of the GNU
+ * General Public License (GPL) as published by the Free Software
+ * Foundation, in version 2 as it comes in the "COPYING" file of the
+ * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
+ * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
+ *
+ * The contents of this file may alternatively be used under the terms
+ * of the Common Development and Distribution License Version 1.0
+ * (CDDL) only, as it comes in the "COPYING.CDDL" file of the
+ * VirtualBox OSE distribution, in which case the provisions of the
+ * CDDL are applicable instead of those of the GPL.
+ *
+ * You may elect to license modified versions of this file under the
+ * terms and conditions of either the GPL or the CDDL or both.
+ */
+
+#ifndef IPRT_INCLUDED_serialport_h
+#define IPRT_INCLUDED_serialport_h
+#ifndef RT_WITHOUT_PRAGMA_ONCE
+# pragma once
+#endif
+
+#include <iprt/types.h>
+
+RT_C_DECLS_BEGIN
+
+/** @defgroup grp_rt_serial  IPRT Serial Port API
+ * @ingroup grp_rt
+ *
+ * The IPRT serial port API provides a platform independent API to control a
+ * serial port of the host. It supports receiving/transmitting data as well as
+ * controlling and monitoring the status lines of a standard serial port.
+ *
+ * The user of the API is currently resposible for serializing calls to it.
+ * The only exception is RTSerialPortEvtPollInterrupt() which can be called on
+ * any thread to interrupt another thread waiting in RTSerialPortEvtPoll().
+ *
+ * @{
+ */
+
+/** Serial Port handle. */
+typedef struct RTSERIALPORTINTERNAL  *RTSERIALPORT;
+/** Pointer to a Serial Port handle. */
+typedef RTSERIALPORT                 *PRTSERIALPORT;
+/** NIL Serial Port handle value. */
+#define NIL_RTSERIALPORT             ((RTSERIALPORT)0)
+
+
+/**
+ * Supported parity settings.
+ */
+typedef enum RTSERIALPORTPARITY
+{
+    /** Invalid parity setting. */
+    RTSERIALPORTPARITY_INVALID = 0,
+    /** No parity used. */
+    RTSERIALPORTPARITY_NONE,
+    /** Even parity used. */
+    RTSERIALPORTPARITY_EVEN,
+    /** Odd parity used. */
+    RTSERIALPORTPARITY_ODD,
+    /** Mark parity (parity bit always 1) used. */
+    RTSERIALPORTPARITY_MARK,
+    /** Space parity (parity bit always 0) used. */
+    RTSERIALPORTPARITY_SPACE,
+    /** 32bit hack. */
+    RTSERIALPORTPARITY_32BIT_HACK = 0x7fffffff
+} RTSERIALPORTPARITY;
+
+
+/**
+ * Supported data bit count setting.
+ */
+typedef enum RTSERIALPORTDATABITS
+{
+    /** Invalid bitcount setting. */
+    RTSERIALPORTDATABITS_INVALID = 0,
+    /** 5 data bits. */
+    RTSERIALPORTDATABITS_5BITS,
+    /** 6 data bits. */
+    RTSERIALPORTDATABITS_6BITS,
+    /** 7 data bits. */
+    RTSERIALPORTDATABITS_7BITS,
+    /** 8 data bits. */
+    RTSERIALPORTDATABITS_8BITS,
+    /** 32bit hack. */
+    RTSERIALPORTDATABITS_32BIT_HACK = 0x7fffffff
+} RTSERIALPORTDATABITS;
+
+
+/**
+ * Supported stop bit setting.
+ */
+typedef enum RTSERIALPORTSTOPBITS
+{
+    /** Invalid stop bit setting. */
+    RTSERIALPORTSTOPBITS_INVALID = 0,
+    /** One stop bit is used. */
+    RTSERIALPORTSTOPBITS_ONE,
+    /** 1.5 stop bits are used. */
+    RTSERIALPORTSTOPBITS_ONEPOINTFIVE,
+    /** 2 stop bits are used. */
+    RTSERIALPORTSTOPBITS_TWO,
+    /** 32bit hack. */
+    RTSERIALPORTSTOPBITS_32BIT_HACK = 0x7fffffff
+} RTSERIALPORTSTOPBITS;
+
+
+/**
+ * Serial port config structure.
+ */
+typedef struct RTSERIALPORTCFG
+{
+    /** Baud rate. */
+    uint32_t                    uBaudRate;
+    /** Used parity. */
+    RTSERIALPORTPARITY          enmParity;
+    /** Number of data bits. */
+    RTSERIALPORTDATABITS        enmDataBitCount;
+    /** Number of stop bits. */
+    RTSERIALPORTSTOPBITS        enmStopBitCount;
+} RTSERIALPORTCFG;
+/** Pointer to a serial port config. */
+typedef RTSERIALPORTCFG *PRTSERIALPORTCFG;
+/** Pointer to a const serial port config. */
+typedef const RTSERIALPORTCFG *PCRTSERIALPORTCFG;
+
+
+/** @name RTSerialPortOpen flags
+ * @{ */
+/** Open the serial port with the receiver enabled to receive data. */
+#define RTSERIALPORT_OPEN_F_READ                           RT_BIT(0)
+/** Open the serial port with the transmitter enabled to transmit data. */
+#define RTSERIALPORT_OPEN_F_WRITE                          RT_BIT(1)
+/** Open the serial port with status line monitoring enabled to get notified about status line changes. */
+#define RTSERIALPORT_OPEN_F_SUPPORT_STATUS_LINE_MONITORING RT_BIT(2)
+/** Open the serial port with BREAK condition detection enabled (Requires extra work on some hosts). */
+#define RTSERIALPORT_OPEN_F_DETECT_BREAK_CONDITION         RT_BIT(3)
+/** Open the serial port with loopback mode enabled. */
+#define RTSERIALPORT_OPEN_F_ENABLE_LOOPBACK                RT_BIT(4)
+/** Bitmask of valid flags. */
+#define RTSERIALPORT_OPEN_F_VALID_MASK                     UINT32_C(0x0000001f)
+/** @} */
+
+
+/** @name RTSerialPortChgModemLines flags
+ * @{ */
+/** Change the RTS (Ready To Send) line signal. */
+#define RTSERIALPORT_CHG_STS_LINES_F_RTS                   RT_BIT(0)
+/** Change the DTR (Data Terminal Ready) line signal. */
+#define RTSERIALPORT_CHG_STS_LINES_F_DTR                   RT_BIT(1)
+/** Bitmask of valid flags. */
+#define RTSERIALPORT_CHG_STS_LINES_F_VALID_MASK            UINT32_C(0x00000003)
+/** @} */
+
+
+/** @name RTSerialPortQueryStatusLines flags
+ * @{ */
+/** The DCD (Data Carrier Detect) signal is active. */
+#define RTSERIALPORT_STS_LINE_DCD                          RT_BIT(0)
+/** The RI (Ring Indicator) signal is active. */
+#define RTSERIALPORT_STS_LINE_RI                           RT_BIT(1)
+/** The DSR (Data Set Ready) signal is active. */
+#define RTSERIALPORT_STS_LINE_DSR                          RT_BIT(2)
+/** The CTS (Clear To Send) signal is active. */
+#define RTSERIALPORT_STS_LINE_CTS                          RT_BIT(3)
+/** @} */
+
+
+/** @name RTSerialPortEvtPoll flags
+ * @{ */
+/** Data was received and can be read. */
+#define RTSERIALPORT_EVT_F_DATA_RX                         RT_BIT(0)
+/** All data was transmitted and there is room again in the transmit buffer. */
+#define RTSERIALPORT_EVT_F_DATA_TX                         RT_BIT(1)
+/** A BREAK condition was detected on the communication channel.
+ * Only available when BREAK condition detection was enabled when opening the serial port .*/
+#define RTSERIALPORT_EVT_F_BREAK_DETECTED                  RT_BIT(2)
+/** One of the monitored status lines changed, check with RTSerialPortQueryStatusLines().
+ * Only available if status line monitoring was enabled when opening the serial port. */
+#define RTSERIALPORT_EVT_F_STATUS_LINE_CHANGED             RT_BIT(3)
+/** Status line monitor failed with an error and status line monitoring is disabled,
+ * this cannot be given in the event mask but will be set if status line
+ * monitoring is enabled and the monitor failed. */
+#define RTSERIALPORT_EVT_F_STATUS_LINE_MONITOR_FAILED      RT_BIT(4)
+/** Bitmask of valid flags. */
+#define RTSERIALPORT_EVT_F_VALID_MASK                      UINT32_C(0x0000001f)
+/** @} */
+
+
+/**
+ * Opens a serial port with the specified flags.
+ *
+ * @returns IPRT status code.
+ * @param   phSerialPort            Where to store the IPRT serial port handle on success.
+ * @param   pszPortAddress          The address of the serial port (host dependent).
+ * @param   fFlags                  Flags to open the serial port with, see RTSERIALPORT_OPEN_F_*.
+ */
+RTDECL(int) RTSerialPortOpen(PRTSERIALPORT phSerialPort, const char *pszPortAddress, uint32_t fFlags);
+
+
+/**
+ * Closes the given serial port handle.
+ *
+ * @returns IPRT status code.
+ * @param   hSerialPort             The IPRT serial port handle.
+ */
+RTDECL(int) RTSerialPortClose(RTSERIALPORT hSerialPort);
+
+
+/**
+ * Gets the native handle for an IPRT serial port handle.
+ *
+ * @returns The native handle. -1 on failure.
+ * @param   hSerialPort             The IPRT serial port handle.
+ */
+RTDECL(RTHCINTPTR) RTSerialPortToNative(RTSERIALPORT hSerialPort);
+
+
+/**
+ * Tries to read the given number of bytes from the serial port, blocking version.
+ *
+ * @returns IPRT status code.
+ * @retval  VERR_SERIALPORT_BREAK_DETECTED if a break was detected before the requested number of bytes was received.
+ * @param   hSerialPort             The IPRT serial port handle.
+ * @param   pvBuf                   Where to store the read data.
+ * @param   cbToRead                How much to read from the serial port.
+ * @param   pcbRead                 Where to store the number of bytes received until an error condition occurred, optional.
+ */
+RTDECL(int) RTSerialPortRead(RTSERIALPORT hSerialPort, void *pvBuf, size_t cbToRead, size_t *pcbRead);
+
+
+/**
+ * Tries to read the given number of bytes from the serial port, non-blocking version.
+ *
+ * @returns IPRT status code.
+ * @retval  VERR_SERIALPORT_BREAK_DETECTED if a break was detected before anything could be received.
+ * @retval  VINF_TRY_AGAIN if nothing could be read.
+ * @param   hSerialPort             The IPRT serial port handle.
+ * @param   pvBuf                   Where to store the read data.
+ * @param   cbToRead                How much to read from the serial port.
+ * @param   pcbRead                 Where to store the number of bytes received.
+ */
+RTDECL(int) RTSerialPortReadNB(RTSERIALPORT hSerialPort, void *pvBuf, size_t cbToRead, size_t *pcbRead);
+
+
+/**
+ * Writes the given data to the serial port, blocking version.
+ *
+ * @returns IPRT status code.
+ * @param   hSerialPort             The IPRT serial port handle.
+ * @param   pvBuf                   The data to write.
+ * @param   cbToWrite               How much to write.
+ * @param   pcbWritten              Where to store the number of bytes written until an error condition occurred, optional.
+ */
+RTDECL(int) RTSerialPortWrite(RTSERIALPORT hSerialPort, const void *pvBuf, size_t cbToWrite, size_t *pcbWritten);
+
+
+/**
+ * Writes the given data to the serial port, non-blocking version.
+ *
+ * @returns IPRT status code.
+ * @retval  VINF_TRY_AGAIN if nothing could be written.
+ * @param   hSerialPort             The IPRT serial port handle.
+ * @param   pvBuf                   The data to write.
+ * @param   cbToWrite               How much to write.
+ * @param   pcbWritten              Where to store the number of bytes written.
+ */
+RTDECL(int) RTSerialPortWriteNB(RTSERIALPORT hSerialPort, const void *pvBuf, size_t cbToWrite, size_t *pcbWritten);
+
+
+/**
+ * Queries the current active serial port config.
+ *
+ * @returns IPRT status code.
+ * @param   hSerialPort             The IPRT serial port handle.
+ * @param   pCfg                    Where to store the current active config.
+ */
+RTDECL(int) RTSerialPortCfgQueryCurrent(RTSERIALPORT hSerialPort, PRTSERIALPORTCFG pCfg);
+
+
+/**
+ * Change the serial port to the given config.
+ *
+ * @returns IPRT status code.
+ * @retval  VERR_SERIALPORT_INVALID_BAUDRATE if the baud rate is not supported on the serial port.
+ * @param   hSerialPort             The IPRT serial port handle.
+ * @param   pCfg                    The config to write.
+ * @param   pErrInfo                Where to store additional information on error, optional.
+ */
+RTDECL(int) RTSerialPortCfgSet(RTSERIALPORT hSerialPort, PCRTSERIALPORTCFG pCfg, PRTERRINFO pErrInfo);
+
+
+/**
+ * Poll for an event on the given serial port.
+ *
+ * @returns IPRT status code.
+ * @retval VERR_TIMEOUT if the timeout was reached before an event happened.
+ * @retval VERR_INTERRUPTED if another thread interrupted the polling through RTSerialPortEvtPollInterrupt().
+ * @param   hSerialPort             The IPRT serial port handle.
+ * @param   fEvtMask                The mask of events to receive, see RTSERIALPORT_EVT_F_*
+ * @param   pfEvtsRecv              Where to store the bitmask of events received.
+ * @param   msTimeout               Number of milliseconds to wait for an event.
+ */
+RTDECL(int) RTSerialPortEvtPoll(RTSERIALPORT hSerialPort, uint32_t fEvtMask, uint32_t *pfEvtsRecv,
+                                RTMSINTERVAL msTimeout);
+
+
+/**
+ * Interrupt another thread currently polling for an event.
+ *
+ * @returns IPRT status code.
+ * @param   hSerialPort             The IPRT serial port handle.
+ *
+ * @note Any thread.
+ */
+RTDECL(int) RTSerialPortEvtPollInterrupt(RTSERIALPORT hSerialPort);
+
+
+/**
+ * Sets or clears a BREAK condition on the given serial port.
+ *
+ * @returns IPRT status code.
+ * @param   hSerialPort             The IPRT serial port handle.
+ * @param   fSet                    Flag whether to set the BREAK condition or clear it.
+ */
+RTDECL(int) RTSerialPortChgBreakCondition(RTSERIALPORT hSerialPort, bool fSet);
+
+
+/**
+ * Modify the status lines of the given serial port.
+ *
+ * @returns IPRT status code.
+ * @param   hSerialPort             The IPRT serial port handle.
+ * @param   fClear                  Combination of status lines to clear, see RTSERIALPORT_CHG_STS_LINES_F_*.
+ * @param   fSet                    Combination of status lines to set, see RTSERIALPORT_CHG_STS_LINES_F_*.
+ *
+ * @note fClear takes precedence over fSet in case the same status line bit is set in both arguments.
+ */
+RTDECL(int) RTSerialPortChgStatusLines(RTSERIALPORT hSerialPort, uint32_t fClear, uint32_t fSet);
+
+
+/**
+ * Query the status of the status lines on the given serial port.
+ *
+ * @returns IPRT status code.
+ * @param   hSerialPort             The IPRT serial port handle.
+ * @param   pfStsLines              Where to store the bitmask of active status lines on success,
+ *                                  see RTSERIALPORT_STS_LINE_*.
+ */
+RTDECL(int) RTSerialPortQueryStatusLines(RTSERIALPORT hSerialPort, uint32_t *pfStsLines);
+
+/** @} */
+
+RT_C_DECLS_END
+
+#endif /* !IPRT_INCLUDED_serialport_h */
+