Adding upstream version 6.0.4-dfsg.upstream/6.0.4-dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 1211 insertions, 0 deletions

diff --git a/include/iprt/time.h b/include/iprt/time.h
new file mode 100644
index 00000000..fead7cb1
--- /dev/null
+++ b/include/iprt/time.h
@@ -0,0 +1,1211 @@
+/** @file
+ * IPRT - Time.
+ */
+
+/*
+ * Copyright (C) 2006-2019 Oracle Corporation
+ *
+ * This file is part of VirtualBox Open Source Edition (OSE), as
+ * available from http://www.virtualbox.org. This file is free software;
+ * you can redistribute it and/or modify it under the terms of the GNU
+ * General Public License (GPL) as published by the Free Software
+ * Foundation, in version 2 as it comes in the "COPYING" file of the
+ * VirtualBox OSE distribution. VirtualBox OSE is distributed in the
+ * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind.
+ *
+ * The contents of this file may alternatively be used under the terms
+ * of the Common Development and Distribution License Version 1.0
+ * (CDDL) only, as it comes in the "COPYING.CDDL" file of the
+ * VirtualBox OSE distribution, in which case the provisions of the
+ * CDDL are applicable instead of those of the GPL.
+ *
+ * You may elect to license modified versions of this file under the
+ * terms and conditions of either the GPL or the CDDL or both.
+ */
+
+#ifndef IPRT_INCLUDED_time_h
+#define IPRT_INCLUDED_time_h
+#ifndef RT_WITHOUT_PRAGMA_ONCE
+# pragma once
+#endif
+
+#include <iprt/cdefs.h>
+#include <iprt/types.h>
+#include <iprt/assertcompile.h>
+
+RT_C_DECLS_BEGIN
+
+/** @defgroup grp_rt_time   RTTime - Time
+ * @ingroup grp_rt
+ * @{
+ */
+
+/** Time Specification.
+ *
+ * Use the inline RTTimeSpecGet/Set to operate on structure this so we
+ * can easily change the representation if required later.
+ *
+ * The current representation is in nanoseconds relative to the unix epoch
+ * (1970-01-01 00:00:00 UTC). This gives us an approximate span from
+ * 1678 to 2262 without sacrificing the resolution offered by the various
+ * host OSes (BSD & LINUX 1ns, NT 100ns).
+ */
+typedef struct RTTIMESPEC
+{
+    /** Nanoseconds since epoch.
+     * The name is intentially too long to be comfortable to use because you should be
+     * using inline helpers! */
+    int64_t     i64NanosecondsRelativeToUnixEpoch;
+} RTTIMESPEC;
+
+
+/** @name RTTIMESPEC methods
+ * @{ */
+
+/**
+ * Gets the time as nanoseconds relative to the unix epoch.
+ *
+ * @returns Nanoseconds relative to unix epoch.
+ * @param   pTime       The time spec to interpret.
+ */
+DECLINLINE(int64_t) RTTimeSpecGetNano(PCRTTIMESPEC pTime)
+{
+    return pTime->i64NanosecondsRelativeToUnixEpoch;
+}
+
+
+/**
+ * Sets the time give by nanoseconds relative to the unix epoch.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   i64Nano     The new time in nanoseconds.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecSetNano(PRTTIMESPEC pTime, int64_t i64Nano)
+{
+    pTime->i64NanosecondsRelativeToUnixEpoch = i64Nano;
+    return pTime;
+}
+
+
+/**
+ * Gets the time as microseconds relative to the unix epoch.
+ *
+ * @returns microseconds relative to unix epoch.
+ * @param   pTime       The time spec to interpret.
+ */
+DECLINLINE(int64_t) RTTimeSpecGetMicro(PCRTTIMESPEC pTime)
+{
+    return pTime->i64NanosecondsRelativeToUnixEpoch / RT_NS_1US;
+}
+
+
+/**
+ * Sets the time given by microseconds relative to the unix epoch.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   i64Micro    The new time in microsecond.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecSetMicro(PRTTIMESPEC pTime, int64_t i64Micro)
+{
+    pTime->i64NanosecondsRelativeToUnixEpoch = i64Micro * RT_NS_1US;
+    return pTime;
+}
+
+
+/**
+ * Gets the time as milliseconds relative to the unix epoch.
+ *
+ * @returns milliseconds relative to unix epoch.
+ * @param   pTime       The time spec to interpret.
+ */
+DECLINLINE(int64_t) RTTimeSpecGetMilli(PCRTTIMESPEC pTime)
+{
+    return pTime->i64NanosecondsRelativeToUnixEpoch / RT_NS_1MS;
+}
+
+
+/**
+ * Sets the time given by milliseconds relative to the unix epoch.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   i64Milli    The new time in milliseconds.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecSetMilli(PRTTIMESPEC pTime, int64_t i64Milli)
+{
+    pTime->i64NanosecondsRelativeToUnixEpoch = i64Milli * RT_NS_1MS;
+    return pTime;
+}
+
+
+/**
+ * Gets the time as seconds relative to the unix epoch.
+ *
+ * @returns seconds relative to unix epoch.
+ * @param   pTime       The time spec to interpret.
+ */
+DECLINLINE(int64_t) RTTimeSpecGetSeconds(PCRTTIMESPEC pTime)
+{
+    return pTime->i64NanosecondsRelativeToUnixEpoch / RT_NS_1SEC;
+}
+
+
+/**
+ * Sets the time given by seconds relative to the unix epoch.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   i64Seconds  The new time in seconds.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecSetSeconds(PRTTIMESPEC pTime, int64_t i64Seconds)
+{
+    pTime->i64NanosecondsRelativeToUnixEpoch = i64Seconds * RT_NS_1SEC;
+    return pTime;
+}
+
+
+/**
+ * Makes the time spec absolute like abs() does (i.e. a positive value).
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecAbsolute(PRTTIMESPEC pTime)
+{
+    if (pTime->i64NanosecondsRelativeToUnixEpoch < 0)
+        pTime->i64NanosecondsRelativeToUnixEpoch = -pTime->i64NanosecondsRelativeToUnixEpoch;
+    return pTime;
+}
+
+
+/**
+ * Negates the time.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecNegate(PRTTIMESPEC pTime)
+{
+    pTime->i64NanosecondsRelativeToUnixEpoch = -pTime->i64NanosecondsRelativeToUnixEpoch;
+    return pTime;
+}
+
+
+/**
+ * Adds a time period to the time.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   pTimeAdd    The time spec to add to pTime.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecAdd(PRTTIMESPEC pTime, PCRTTIMESPEC pTimeAdd)
+{
+    pTime->i64NanosecondsRelativeToUnixEpoch += pTimeAdd->i64NanosecondsRelativeToUnixEpoch;
+    return pTime;
+}
+
+
+/**
+ * Adds a time period give as nanoseconds from the time.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   i64Nano     The time period in nanoseconds.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecAddNano(PRTTIMESPEC pTime, int64_t i64Nano)
+{
+    pTime->i64NanosecondsRelativeToUnixEpoch += i64Nano;
+    return pTime;
+}
+
+
+/**
+ * Adds a time period give as microseconds from the time.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   i64Micro    The time period in microseconds.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecAddMicro(PRTTIMESPEC pTime, int64_t i64Micro)
+{
+    pTime->i64NanosecondsRelativeToUnixEpoch += i64Micro * RT_NS_1US;
+    return pTime;
+}
+
+
+/**
+ * Adds a time period give as milliseconds from the time.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   i64Milli    The time period in milliseconds.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecAddMilli(PRTTIMESPEC pTime, int64_t i64Milli)
+{
+    pTime->i64NanosecondsRelativeToUnixEpoch += i64Milli * RT_NS_1MS;
+    return pTime;
+}
+
+
+/**
+ * Adds a time period give as seconds from the time.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   i64Seconds  The time period in seconds.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecAddSeconds(PRTTIMESPEC pTime, int64_t i64Seconds)
+{
+    pTime->i64NanosecondsRelativeToUnixEpoch += i64Seconds * RT_NS_1SEC;
+    return pTime;
+}
+
+
+/**
+ * Subtracts a time period from the time.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   pTimeSub    The time spec to subtract from pTime.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecSub(PRTTIMESPEC pTime, PCRTTIMESPEC pTimeSub)
+{
+    pTime->i64NanosecondsRelativeToUnixEpoch -= pTimeSub->i64NanosecondsRelativeToUnixEpoch;
+    return pTime;
+}
+
+
+/**
+ * Subtracts a time period give as nanoseconds from the time.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   i64Nano     The time period in nanoseconds.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecSubNano(PRTTIMESPEC pTime, int64_t i64Nano)
+{
+    pTime->i64NanosecondsRelativeToUnixEpoch -= i64Nano;
+    return pTime;
+}
+
+
+/**
+ * Subtracts a time period give as microseconds from the time.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   i64Micro    The time period in microseconds.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecSubMicro(PRTTIMESPEC pTime, int64_t i64Micro)
+{
+    pTime->i64NanosecondsRelativeToUnixEpoch -= i64Micro * RT_NS_1US;
+    return pTime;
+}
+
+
+/**
+ * Subtracts a time period give as milliseconds from the time.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   i64Milli    The time period in milliseconds.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecSubMilli(PRTTIMESPEC pTime, int64_t i64Milli)
+{
+    pTime->i64NanosecondsRelativeToUnixEpoch -= i64Milli * RT_NS_1MS;
+    return pTime;
+}
+
+
+/**
+ * Subtracts a time period give as seconds from the time.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   i64Seconds  The time period in seconds.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecSubSeconds(PRTTIMESPEC pTime, int64_t i64Seconds)
+{
+    pTime->i64NanosecondsRelativeToUnixEpoch -= i64Seconds * RT_NS_1SEC;
+    return pTime;
+}
+
+
+/**
+ * Gives the time in seconds and nanoseconds.
+ *
+ * @returns pTime.
+ * @param   pTime           The time spec to interpret.
+ * @param   *pi32Seconds    Where to store the time period in seconds.
+ * @param   *pi32Nano       Where to store the time period in nanoseconds.
+ */
+DECLINLINE(void) RTTimeSpecGetSecondsAndNano(PRTTIMESPEC pTime, int32_t *pi32Seconds, int32_t *pi32Nano)
+{
+    int64_t i64 = RTTimeSpecGetNano(pTime);
+    int32_t i32Nano = (int32_t)(i64 % RT_NS_1SEC);
+    i64 /= RT_NS_1SEC;
+    if (i32Nano < 0)
+    {
+        i32Nano += RT_NS_1SEC;
+        i64--;
+    }
+    *pi32Seconds = (int32_t)i64;
+    *pi32Nano    = i32Nano;
+}
+
+
+/* PORTME: Add struct timeval guard macro here. */
+#if defined(RTTIME_INCL_TIMEVAL) || defined(_STRUCT_TIMEVAL) || defined(_SYS__TIMEVAL_H_) || defined(_SYS_TIME_H) || defined(_TIMEVAL) || defined(_LINUX_TIME_H) \
+ || (defined(RT_OS_NETBSD) && defined(_SYS_TIME_H_))
+/**
+ * Gets the time as POSIX timeval.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to interpret.
+ * @param   pTimeval    Where to store the time as POSIX timeval.
+ */
+DECLINLINE(struct timeval *) RTTimeSpecGetTimeval(PCRTTIMESPEC pTime, struct timeval *pTimeval)
+{
+    int64_t i64 = RTTimeSpecGetMicro(pTime);
+    int32_t i32Micro = (int32_t)(i64 % RT_US_1SEC);
+    i64 /= RT_US_1SEC;
+    if (i32Micro < 0)
+    {
+        i32Micro += RT_US_1SEC;
+        i64--;
+    }
+    pTimeval->tv_sec = (time_t)i64;
+    pTimeval->tv_usec = i32Micro;
+    return pTimeval;
+}
+
+/**
+ * Sets the time as POSIX timeval.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   pTimeval    Pointer to the POSIX timeval struct with the new time.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecSetTimeval(PRTTIMESPEC pTime, const struct timeval *pTimeval)
+{
+    return RTTimeSpecAddMicro(RTTimeSpecSetSeconds(pTime, pTimeval->tv_sec), pTimeval->tv_usec);
+}
+#endif /* various ways of detecting struct timeval */
+
+
+/* PORTME: Add struct timespec guard macro here. */
+#if defined(RTTIME_INCL_TIMESPEC) || defined(_STRUCT_TIMESPEC) || defined(_SYS__TIMESPEC_H_) || defined(TIMEVAL_TO_TIMESPEC) || defined(_TIMESPEC) \
+ || (defined(RT_OS_NETBSD) && defined(_SYS_TIME_H_))
+/**
+ * Gets the time as POSIX timespec.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to interpret.
+ * @param   pTimespec   Where to store the time as POSIX timespec.
+ */
+DECLINLINE(struct timespec *) RTTimeSpecGetTimespec(PCRTTIMESPEC pTime, struct timespec *pTimespec)
+{
+    int64_t i64 = RTTimeSpecGetNano(pTime);
+    int32_t i32Nano = (int32_t)(i64 % RT_NS_1SEC);
+    i64 /= RT_NS_1SEC;
+    if (i32Nano < 0)
+    {
+        i32Nano += RT_NS_1SEC;
+        i64--;
+    }
+    pTimespec->tv_sec = (time_t)i64;
+    pTimespec->tv_nsec = i32Nano;
+    return pTimespec;
+}
+
+/**
+ * Sets the time as POSIX timespec.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   pTimespec   Pointer to the POSIX timespec struct with the new time.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecSetTimespec(PRTTIMESPEC pTime, const struct timespec *pTimespec)
+{
+    return RTTimeSpecAddNano(RTTimeSpecSetSeconds(pTime, pTimespec->tv_sec), pTimespec->tv_nsec);
+}
+
+
+# ifdef _LINUX_TIME64_H
+DECLINLINE(PRTTIMESPEC) RTTimeSpecSetTimespec64(PRTTIMESPEC pTime, const struct timespec64 *pTimeval)
+{
+    return RTTimeSpecAddNano(RTTimeSpecSetSeconds(pTime, pTimeval->tv_sec), pTimeval->tv_nsec);
+}
+# endif
+#endif /* various ways of detecting struct timespec */
+
+
+
+/** The offset of the unix epoch and the base for NT time (in 100ns units).
+ * Nt time starts at 1601-01-01 00:00:00. */
+#define RTTIME_NT_TIME_OFFSET_UNIX      (116444736000000000LL)
+
+
+/**
+ * Gets the time as NT time.
+ *
+ * @returns Nt time.
+ * @param   pTime       The time spec to interpret.
+ */
+DECLINLINE(uint64_t) RTTimeSpecGetNtTime(PCRTTIMESPEC pTime)
+{
+    return pTime->i64NanosecondsRelativeToUnixEpoch / 100
+        + RTTIME_NT_TIME_OFFSET_UNIX;
+}
+
+
+/**
+ * Sets the time given by Nt time.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   u64NtTime   The new time in Nt time.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecSetNtTime(PRTTIMESPEC pTime, uint64_t u64NtTime)
+{
+    pTime->i64NanosecondsRelativeToUnixEpoch =
+        ((int64_t)u64NtTime - RTTIME_NT_TIME_OFFSET_UNIX) * 100;
+    return pTime;
+}
+
+
+#ifdef _FILETIME_
+/**
+ * Gets the time as NT file time.
+ *
+ * @returns pFileTime.
+ * @param   pTime       The time spec to interpret.
+ * @param   pFileTime   Pointer to NT filetime structure.
+ */
+DECLINLINE(PFILETIME) RTTimeSpecGetNtFileTime(PCRTTIMESPEC pTime, PFILETIME pFileTime)
+{
+    *((uint64_t *)pFileTime) = RTTimeSpecGetNtTime(pTime);
+    return pFileTime;
+}
+
+/**
+ * Sets the time as NT file time.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   pFileTime   Where to store the time as Nt file time.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecSetNtFileTime(PRTTIMESPEC pTime, const FILETIME *pFileTime)
+{
+    return RTTimeSpecSetNtTime(pTime, *(const uint64_t *)pFileTime);
+}
+#endif
+
+
+/** The offset to the start of DOS time.
+ * DOS time starts 1980-01-01 00:00:00.  */
+#define RTTIME_OFFSET_DOS_TIME          (315532800000000000LL)
+
+
+/**
+ * Gets the time as seconds relative to the start of dos time.
+ *
+ * @returns seconds relative to the start of dos time.
+ * @param   pTime       The time spec to interpret.
+ */
+DECLINLINE(int64_t) RTTimeSpecGetDosSeconds(PCRTTIMESPEC pTime)
+{
+    return (pTime->i64NanosecondsRelativeToUnixEpoch - RTTIME_OFFSET_DOS_TIME)
+        / RT_NS_1SEC;
+}
+
+
+/**
+ * Sets the time given by seconds relative to the start of dos time.
+ *
+ * @returns pTime.
+ * @param   pTime       The time spec to modify.
+ * @param   i64Seconds  The new time in seconds relative to the start of dos time.
+ */
+DECLINLINE(PRTTIMESPEC) RTTimeSpecSetDosSeconds(PRTTIMESPEC pTime, int64_t i64Seconds)
+{
+    pTime->i64NanosecondsRelativeToUnixEpoch = i64Seconds * RT_NS_1SEC
+        + RTTIME_OFFSET_DOS_TIME;
+    return pTime;
+}
+
+
+/**
+ * Compare two time specs.
+ *
+ * @returns true they are equal.
+ * @returns false they are not equal.
+ * @param   pTime1  The 1st time spec.
+ * @param   pTime2  The 2nd time spec.
+ */
+DECLINLINE(bool) RTTimeSpecIsEqual(PCRTTIMESPEC pTime1, PCRTTIMESPEC pTime2)
+{
+    return pTime1->i64NanosecondsRelativeToUnixEpoch == pTime2->i64NanosecondsRelativeToUnixEpoch;
+}
+
+
+/**
+ * Compare two time specs.
+ *
+ * @returns 0 if equal, -1 if @a pLeft is smaller, 1 if @a pLeft is larger.
+ * @returns false they are not equal.
+ * @param   pLeft       The 1st time spec.
+ * @param   pRight      The 2nd time spec.
+ */
+DECLINLINE(int) RTTimeSpecCompare(PCRTTIMESPEC pLeft, PCRTTIMESPEC pRight)
+{
+    if (pLeft->i64NanosecondsRelativeToUnixEpoch == pRight->i64NanosecondsRelativeToUnixEpoch)
+        return 0;
+    return pLeft->i64NanosecondsRelativeToUnixEpoch < pRight->i64NanosecondsRelativeToUnixEpoch ? -1 : 1;
+}
+
+
+/**
+ * Converts a time spec to a ISO date string.
+ *
+ * @returns psz on success.
+ * @returns NULL on buffer underflow.
+ * @param   pTime       The time spec.
+ * @param   psz         Where to store the string.
+ * @param   cb          The size of the buffer.
+ */
+RTDECL(char *) RTTimeSpecToString(PCRTTIMESPEC pTime, char *psz, size_t cb);
+
+/**
+ * Attempts to convert an ISO date string to a time structure.
+ *
+ * We're a little forgiving with zero padding, unspecified parts, and leading
+ * and trailing spaces.
+ *
+ * @retval  pTime on success,
+ * @retval  NULL on failure.
+ * @param   pTime       The time spec.
+ * @param   pszString   The ISO date string to convert.
+ */
+RTDECL(PRTTIMESPEC) RTTimeSpecFromString(PRTTIMESPEC pTime, const char *pszString);
+
+/** @} */
+
+
+/**
+ * Exploded time.
+ */
+typedef struct RTTIME
+{
+    /** The year number. */
+    int32_t     i32Year;
+    /** The month of the year (1-12). January is 1. */
+    uint8_t     u8Month;
+    /** The day of the week (0-6). Monday is 0. */
+    uint8_t     u8WeekDay;
+    /** The day of the year (1-366). January the 1st is 1. */
+    uint16_t    u16YearDay;
+    /** The day of the month (1-31). */
+    uint8_t     u8MonthDay;
+    /** Hour of the day (0-23). */
+    uint8_t     u8Hour;
+    /** The minute of the hour (0-59). */
+    uint8_t     u8Minute;
+    /** The second of the minute (0-60).
+     * (u32Nanosecond / 1000000) */
+    uint8_t     u8Second;
+    /** The nanoseconds of the second (0-999999999). */
+    uint32_t    u32Nanosecond;
+    /** Flags, of the RTTIME_FLAGS_* \#defines. */
+    uint32_t    fFlags;
+    /** UCT time offset in minutes (-840-840).  Positive for timezones east of
+     * UTC, negative for zones to the west.  Same as what RTTimeLocalDeltaNano
+     * & RTTimeLocalDeltaNanoFor returns, just different unit. */
+    int32_t     offUTC;
+} RTTIME;
+AssertCompileSize(RTTIME, 24);
+/** Pointer to a exploded time structure. */
+typedef RTTIME *PRTTIME;
+/** Pointer to a const exploded time structure. */
+typedef const RTTIME *PCRTTIME;
+
+/** @name RTTIME::fFlags values.
+ * @{ */
+/** Set if the time is UTC. If clear the time local time. */
+#define RTTIME_FLAGS_TYPE_MASK      3
+/** the time is UTC time. */
+#define RTTIME_FLAGS_TYPE_UTC       2
+/** The time is local time. */
+#define RTTIME_FLAGS_TYPE_LOCAL     3
+
+/** Set if the time is local and daylight saving time is in effect.
+ * Not bit is not valid if RTTIME_FLAGS_NO_DST_DATA is set. */
+#define RTTIME_FLAGS_DST            RT_BIT(4)
+/** Set if the time is local and there is no data available on daylight saving time. */
+#define RTTIME_FLAGS_NO_DST_DATA    RT_BIT(5)
+/** Set if the year is a leap year.
+ * This is mutual exclusiv with RTTIME_FLAGS_COMMON_YEAR. */
+#define RTTIME_FLAGS_LEAP_YEAR      RT_BIT(6)
+/** Set if the year is a common year.
+ * This is mutual exclusiv with RTTIME_FLAGS_LEAP_YEAR. */
+#define RTTIME_FLAGS_COMMON_YEAR    RT_BIT(7)
+/** The mask of valid flags. */
+#define RTTIME_FLAGS_MASK           UINT32_C(0xff)
+/** @} */
+
+
+/**
+ * Gets the current system time (UTC).
+ *
+ * @returns pTime.
+ * @param   pTime       Where to store the time.
+ */
+RTDECL(PRTTIMESPEC) RTTimeNow(PRTTIMESPEC pTime);
+
+/**
+ * Sets the system time.
+ *
+ * @returns IPRT status code
+ * @param   pTime       The new system time (UTC).
+ *
+ * @remarks This will usually fail because changing the wall time is usually
+ *          requires extra privileges.
+ */
+RTDECL(int) RTTimeSet(PCRTTIMESPEC pTime);
+
+/**
+ * Explodes a time spec (UTC).
+ *
+ * @returns pTime.
+ * @param   pTime       Where to store the exploded time.
+ * @param   pTimeSpec   The time spec to exploded.
+ */
+RTDECL(PRTTIME) RTTimeExplode(PRTTIME pTime, PCRTTIMESPEC pTimeSpec);
+
+/**
+ * Implodes exploded time to a time spec (UTC).
+ *
+ * @returns pTime on success.
+ * @returns NULL if the pTime data is invalid.
+ * @param   pTimeSpec   Where to store the imploded UTC time.
+ *                      If pTime specifies a time which outside the range, maximum or
+ *                      minimum values will be returned.
+ * @param   pTime       Pointer to the exploded time to implode.
+ *                      The fields u8Month, u8WeekDay and u8MonthDay are not used,
+ *                      and all the other fields are expected to be within their
+ *                      bounds. Use RTTimeNormalize() to calculate u16YearDay and
+ *                      normalize the ranges of the fields.
+ */
+RTDECL(PRTTIMESPEC) RTTimeImplode(PRTTIMESPEC pTimeSpec, PCRTTIME pTime);
+
+/**
+ * Normalizes the fields of a time structure.
+ *
+ * It is possible to calculate year-day from month/day and vice
+ * versa. If you adjust any of of these, make sure to zero the
+ * other so you make it clear which of the fields to use. If
+ * it's ambiguous, the year-day field is used (and you get
+ * assertions in debug builds).
+ *
+ * All the time fields and the year-day or month/day fields will
+ * be adjusted for overflows. (Since all fields are unsigned, there
+ * is no underflows.) It is possible to exploit this for simple
+ * date math, though the recommended way of doing that to implode
+ * the time into a timespec and do the math on that.
+ *
+ * @returns pTime on success.
+ * @returns NULL if the data is invalid.
+ *
+ * @param   pTime       The time structure to normalize.
+ *
+ * @remarks This function doesn't work with local time, only with UTC time.
+ */
+RTDECL(PRTTIME) RTTimeNormalize(PRTTIME pTime);
+
+/**
+ * Gets the current local system time.
+ *
+ * @returns pTime.
+ * @param   pTime   Where to store the local time.
+ */
+RTDECL(PRTTIMESPEC) RTTimeLocalNow(PRTTIMESPEC pTime);
+
+/**
+ * Gets the current delta between UTC and local time.
+ *
+ * @code
+ *      RTTIMESPEC LocalTime;
+ *      RTTimeSpecAddNano(RTTimeNow(&LocalTime), RTTimeLocalDeltaNano());
+ * @endcode
+ *
+ * @returns Returns the nanosecond delta between UTC and local time.
+ */
+RTDECL(int64_t) RTTimeLocalDeltaNano(void);
+
+/**
+ * Gets the delta between UTC and local time at the given time.
+ *
+ * @code
+ *      RTTIMESPEC LocalTime;
+ *      RTTimeNow(&LocalTime);
+ *      RTTimeSpecAddNano(&LocalTime, RTTimeLocalDeltaNanoFor(&LocalTime));
+ * @endcode
+ *
+ * @param   pTimeSpec   The time spec giving the time to get the delta for.
+ * @returns Returns the nanosecond delta between UTC and local time.
+ */
+RTDECL(int64_t) RTTimeLocalDeltaNanoFor(PCRTTIMESPEC pTimeSpec);
+
+/**
+ * Explodes a time spec to the localized timezone.
+ *
+ * @returns pTime.
+ * @param   pTime       Where to store the exploded time.
+ * @param   pTimeSpec   The time spec to exploded (UTC).
+ */
+RTDECL(PRTTIME) RTTimeLocalExplode(PRTTIME pTime, PCRTTIMESPEC pTimeSpec);
+
+/**
+ * Normalizes the fields of a time structure containing local time.
+ *
+ * See RTTimeNormalize for details.
+ *
+ * @returns pTime on success.
+ * @returns NULL if the data is invalid.
+ * @param   pTime       The time structure to normalize.
+ */
+RTDECL(PRTTIME) RTTimeLocalNormalize(PRTTIME pTime);
+
+/**
+ * Converts a time structure to UTC, relying on UTC offset information
+ * if it contains local time.
+ *
+ * @returns pTime on success.
+ * @returns NULL if the data is invalid.
+ * @param   pTime       The time structure to convert.
+ */
+RTDECL(PRTTIME) RTTimeConvertToZulu(PRTTIME pTime);
+
+/**
+ * Converts a time spec to a ISO date string.
+ *
+ * @returns psz on success.
+ * @returns NULL on buffer underflow.
+ * @param   pTime       The time. Caller should've normalized this.
+ * @param   psz         Where to store the string.
+ * @param   cb          The size of the buffer.
+ */
+RTDECL(char *) RTTimeToString(PCRTTIME pTime, char *psz, size_t cb);
+
+/**
+ * Converts a time spec to a ISO date string, extended version.
+ *
+ * @returns Output string length on success (positive), VERR_BUFFER_OVERFLOW
+ *          (negative) or VERR_OUT_OF_RANGE (negative) on failure.
+ * @param   pTime           The time. Caller should've normalized this.
+ * @param   psz             Where to store the string.
+ * @param   cb              The size of the buffer.
+ * @param   cFractionDigits Number of digits in the fraction.  Max is 9.
+ */
+RTDECL(ssize_t) RTTimeToStringEx(PCRTTIME pTime, char *psz, size_t cb, unsigned cFractionDigits);
+
+/** Suggested buffer length for RTTimeToString and RTTimeToStringEx output, including terminator. */
+#define RTTIME_STR_LEN      40
+
+/**
+ * Attempts to convert an ISO date string to a time structure.
+ *
+ * We're a little forgiving with zero padding, unspecified parts, and leading
+ * and trailing spaces.
+ *
+ * @retval  pTime on success,
+ * @retval  NULL on failure.
+ * @param   pTime       Where to store the time on success.
+ * @param   pszString   The ISO date string to convert.
+ */
+RTDECL(PRTTIME) RTTimeFromString(PRTTIME pTime, const char *pszString);
+
+/**
+ * Formats the given time on a RTC-2822 compliant format.
+ *
+ * @returns Output string length on success (positive), VERR_BUFFER_OVERFLOW
+ *          (negative) on failure.
+ * @param   pTime       The time. Caller should've normalized this.
+ * @param   psz         Where to store the string.
+ * @param   cb          The size of the buffer.
+ * @param   fFlags      RTTIME_RFC2822_F_XXX
+ * @sa      RTTIME_RFC2822_LEN
+ */
+RTDECL(ssize_t) RTTimeToRfc2822(PRTTIME pTime, char *psz, size_t cb, uint32_t fFlags);
+
+/** Suggested buffer length for RTTimeToRfc2822 output, including terminator. */
+#define RTTIME_RFC2822_LEN      40
+/** @name RTTIME_RFC2822_F_XXX
+ * @{ */
+/** Use the deprecated GMT timezone instead of +/-0000.
+ * This is required by the HTTP RFC-7231 7.1.1.1. */
+#define RTTIME_RFC2822_F_GMT    RT_BIT_32(0)
+/** @} */
+
+/**
+ * Attempts to convert an RFC-2822 date string to a time structure.
+ *
+ * We're a little forgiving with zero padding, unspecified parts, and leading
+ * and trailing spaces.
+ *
+ * @retval  pTime on success,
+ * @retval  NULL on failure.
+ * @param   pTime       Where to store the time on success.
+ * @param   pszString   The ISO date string to convert.
+ */
+RTDECL(PRTTIME) RTTimeFromRfc2822(PRTTIME pTime, const char *pszString);
+
+/**
+ * Checks if a year is a leap year or not.
+ *
+ * @returns true if it's a leap year.
+ * @returns false if it's a common year.
+ * @param   i32Year     The year in question.
+ */
+RTDECL(bool) RTTimeIsLeapYear(int32_t i32Year);
+
+/**
+ * Compares two normalized time structures.
+ *
+ * @retval  0 if equal.
+ * @retval  -1 if @a pLeft is earlier than @a pRight.
+ * @retval  1 if @a pRight is earlier than @a pLeft.
+ *
+ * @param   pLeft       The left side time.  NULL is accepted.
+ * @param   pRight      The right side time.  NULL is accepted.
+ *
+ * @note    A NULL time is considered smaller than anything else.  If both are
+ *          NULL, they are considered equal.
+ */
+RTDECL(int) RTTimeCompare(PCRTTIME pLeft, PCRTTIME pRight);
+
+/**
+ * Gets the current nanosecond timestamp.
+ *
+ * @returns nanosecond timestamp.
+ */
+RTDECL(uint64_t) RTTimeNanoTS(void);
+
+/**
+ * Gets the current millisecond timestamp.
+ *
+ * @returns millisecond timestamp.
+ */
+RTDECL(uint64_t) RTTimeMilliTS(void);
+
+/**
+ * Debugging the time api.
+ *
+ * @returns the number of 1ns steps which has been applied by RTTimeNanoTS().
+ */
+RTDECL(uint32_t) RTTimeDbgSteps(void);
+
+/**
+ * Debugging the time api.
+ *
+ * @returns the number of times the TSC interval expired RTTimeNanoTS().
+ */
+RTDECL(uint32_t) RTTimeDbgExpired(void);
+
+/**
+ * Debugging the time api.
+ *
+ * @returns the number of bad previous values encountered by RTTimeNanoTS().
+ */
+RTDECL(uint32_t) RTTimeDbgBad(void);
+
+/**
+ * Debugging the time api.
+ *
+ * @returns the number of update races in RTTimeNanoTS().
+ */
+RTDECL(uint32_t) RTTimeDbgRaces(void);
+
+/** @name RTTimeNanoTS GIP worker functions, for TM.
+ * @{ */
+/** Pointer to a RTTIMENANOTSDATA structure. */
+typedef struct RTTIMENANOTSDATA *PRTTIMENANOTSDATA;
+
+/**
+ * Nanosecond timestamp data.
+ *
+ * This is used to keep track of statistics and callback so IPRT
+ * and TM (VirtualBox) can share code.
+ *
+ * @remark Keep this in sync with the assembly version in timesupA.asm.
+ */
+typedef struct RTTIMENANOTSDATA
+{
+    /** Where the previous timestamp is stored.
+     * This is maintained to ensure that time doesn't go backwards or anything. */
+    uint64_t volatile  *pu64Prev;
+
+    /**
+     * Helper function that's used by the assembly routines when something goes bust.
+     *
+     * @param   pData           Pointer to this structure.
+     * @param   u64NanoTS       The calculated nano ts.
+     * @param   u64DeltaPrev    The delta relative to the previously returned timestamp.
+     * @param   u64PrevNanoTS   The previously returned timestamp (as it was read it).
+     */
+    DECLCALLBACKMEMBER(void, pfnBad)(PRTTIMENANOTSDATA pData, uint64_t u64NanoTS, uint64_t u64DeltaPrev, uint64_t u64PrevNanoTS);
+
+    /**
+     * Callback for when rediscovery is required.
+     *
+     * @returns Nanosecond timestamp.
+     * @param   pData           Pointer to this structure.
+     */
+    DECLCALLBACKMEMBER(uint64_t, pfnRediscover)(PRTTIMENANOTSDATA pData);
+
+    /**
+     * Callback for when some CPU index related stuff goes wrong.
+     *
+     * @returns Nanosecond timestamp.
+     * @param   pData           Pointer to this structure.
+     * @param   idApic          The APIC ID if available, otherwise (UINT16_MAX-1).
+     * @param   iCpuSet         The CPU set index if available, otherwise
+     *                          (UINT16_MAX-1).
+     * @param   iGipCpu         The GIP CPU array index if available, otherwise
+     *                          (UINT16_MAX-1).
+     */
+    DECLCALLBACKMEMBER(uint64_t, pfnBadCpuIndex)(PRTTIMENANOTSDATA pData, uint16_t idApic, uint16_t iCpuSet, uint16_t iGipCpu);
+
+    /** Number of 1ns steps because of overshooting the period. */
+    uint32_t            c1nsSteps;
+    /** The number of times the interval expired (overflow). */
+    uint32_t            cExpired;
+    /** Number of "bad" previous values. */
+    uint32_t            cBadPrev;
+    /** The number of update races. */
+    uint32_t            cUpdateRaces;
+} RTTIMENANOTSDATA;
+
+#ifndef IN_RING3
+/**
+ * The Ring-3 layout of the RTTIMENANOTSDATA structure.
+ */
+typedef struct RTTIMENANOTSDATAR3
+{
+    R3PTRTYPE(uint64_t volatile  *) pu64Prev;
+    DECLR3CALLBACKMEMBER(void, pfnBad,(PRTTIMENANOTSDATA pData, uint64_t u64NanoTS, uint64_t u64DeltaPrev, uint64_t u64PrevNanoTS));
+    DECLR3CALLBACKMEMBER(uint64_t, pfnRediscover,(PRTTIMENANOTSDATA pData));
+    DECLR3CALLBACKMEMBER(uint64_t, pfnBadCpuIndex,(PRTTIMENANOTSDATA pData, uint16_t idApic, uint16_t iCpuSet, uint16_t iGipCpu));
+    uint32_t            c1nsSteps;
+    uint32_t            cExpired;
+    uint32_t            cBadPrev;
+    uint32_t            cUpdateRaces;
+} RTTIMENANOTSDATAR3;
+#else
+typedef RTTIMENANOTSDATA RTTIMENANOTSDATAR3;
+#endif
+
+#ifndef IN_RING0
+/**
+ * The Ring-3 layout of the RTTIMENANOTSDATA structure.
+ */
+typedef struct RTTIMENANOTSDATAR0
+{
+    R0PTRTYPE(uint64_t volatile  *) pu64Prev;
+    DECLR0CALLBACKMEMBER(void, pfnBad,(PRTTIMENANOTSDATA pData, uint64_t u64NanoTS, uint64_t u64DeltaPrev, uint64_t u64PrevNanoTS));
+    DECLR0CALLBACKMEMBER(uint64_t, pfnRediscover,(PRTTIMENANOTSDATA pData));
+    DECLR0CALLBACKMEMBER(uint64_t, pfnBadCpuIndex,(PRTTIMENANOTSDATA pData, uint16_t idApic, uint16_t iCpuSet, uint16_t iGipCpu));
+    uint32_t            c1nsSteps;
+    uint32_t            cExpired;
+    uint32_t            cBadPrev;
+    uint32_t            cUpdateRaces;
+} RTTIMENANOTSDATAR0;
+#else
+typedef RTTIMENANOTSDATA RTTIMENANOTSDATAR0;
+#endif
+
+#ifndef IN_RC
+/**
+ * The RC layout of the RTTIMENANOTSDATA structure.
+ */
+typedef struct RTTIMENANOTSDATARC
+{
+    RCPTRTYPE(uint64_t volatile  *) pu64Prev;
+    DECLRCCALLBACKMEMBER(void, pfnBad,(PRTTIMENANOTSDATA pData, uint64_t u64NanoTS, uint64_t u64DeltaPrev, uint64_t u64PrevNanoTS));
+    DECLRCCALLBACKMEMBER(uint64_t, pfnRediscover,(PRTTIMENANOTSDATA pData));
+    DECLRCCALLBACKMEMBER(uint64_t, pfnBadCpuIndex,(PRTTIMENANOTSDATA pData, uint16_t idApic, uint16_t iCpuSet, uint16_t iGipCpu));
+    uint32_t            c1nsSteps;
+    uint32_t            cExpired;
+    uint32_t            cBadPrev;
+    uint32_t            cUpdateRaces;
+} RTTIMENANOTSDATARC;
+#else
+typedef RTTIMENANOTSDATA RTTIMENANOTSDATARC;
+#endif
+
+/** Internal RTTimeNanoTS worker (assembly). */
+typedef DECLCALLBACK(uint64_t) FNTIMENANOTSINTERNAL(PRTTIMENANOTSDATA pData);
+/** Pointer to an internal RTTimeNanoTS worker (assembly). */
+typedef FNTIMENANOTSINTERNAL *PFNTIMENANOTSINTERNAL;
+RTDECL(uint64_t) RTTimeNanoTSLegacySyncInvarNoDelta(PRTTIMENANOTSDATA pData);
+RTDECL(uint64_t) RTTimeNanoTSLFenceSyncInvarNoDelta(PRTTIMENANOTSDATA pData);
+#ifdef IN_RING3
+RTDECL(uint64_t) RTTimeNanoTSLegacyAsyncUseApicId(PRTTIMENANOTSDATA pData);
+RTDECL(uint64_t) RTTimeNanoTSLegacyAsyncUseRdtscp(PRTTIMENANOTSDATA pData);
+RTDECL(uint64_t) RTTimeNanoTSLegacyAsyncUseRdtscpGroupChNumCl(PRTTIMENANOTSDATA pData);
+RTDECL(uint64_t) RTTimeNanoTSLegacyAsyncUseIdtrLim(PRTTIMENANOTSDATA pData);
+RTDECL(uint64_t) RTTimeNanoTSLegacySyncInvarWithDeltaUseApicId(PRTTIMENANOTSDATA pData);
+RTDECL(uint64_t) RTTimeNanoTSLegacySyncInvarWithDeltaUseRdtscp(PRTTIMENANOTSDATA pData);
+RTDECL(uint64_t) RTTimeNanoTSLegacySyncInvarWithDeltaUseIdtrLim(PRTTIMENANOTSDATA pData);
+RTDECL(uint64_t) RTTimeNanoTSLFenceAsyncUseApicId(PRTTIMENANOTSDATA pData);
+RTDECL(uint64_t) RTTimeNanoTSLFenceAsyncUseRdtscp(PRTTIMENANOTSDATA pData);
+RTDECL(uint64_t) RTTimeNanoTSLFenceAsyncUseRdtscpGroupChNumCl(PRTTIMENANOTSDATA pData);
+RTDECL(uint64_t) RTTimeNanoTSLFenceAsyncUseIdtrLim(PRTTIMENANOTSDATA pData);
+RTDECL(uint64_t) RTTimeNanoTSLFenceSyncInvarWithDeltaUseApicId(PRTTIMENANOTSDATA pData);
+RTDECL(uint64_t) RTTimeNanoTSLFenceSyncInvarWithDeltaUseRdtscp(PRTTIMENANOTSDATA pData);
+RTDECL(uint64_t) RTTimeNanoTSLFenceSyncInvarWithDeltaUseIdtrLim(PRTTIMENANOTSDATA pData);
+#else
+RTDECL(uint64_t) RTTimeNanoTSLegacyAsync(PRTTIMENANOTSDATA pData);
+RTDECL(uint64_t) RTTimeNanoTSLegacySyncInvarWithDelta(PRTTIMENANOTSDATA pData);
+RTDECL(uint64_t) RTTimeNanoTSLFenceAsync(PRTTIMENANOTSDATA pData);
+RTDECL(uint64_t) RTTimeNanoTSLFenceSyncInvarWithDelta(PRTTIMENANOTSDATA pData);
+#endif
+
+/** @} */
+
+
+/**
+ * Gets the current nanosecond timestamp.
+ *
+ * This differs from RTTimeNanoTS in that it will use system APIs and not do any
+ * resolution or performance optimizations.
+ *
+ * @returns nanosecond timestamp.
+ */
+RTDECL(uint64_t) RTTimeSystemNanoTS(void);
+
+/**
+ * Gets the current millisecond timestamp.
+ *
+ * This differs from RTTimeNanoTS in that it will use system APIs and not do any
+ * resolution or performance optimizations.
+ *
+ * @returns millisecond timestamp.
+ */
+RTDECL(uint64_t) RTTimeSystemMilliTS(void);
+
+/**
+ * Get the nanosecond timestamp relative to program startup.
+ *
+ * @returns Timestamp relative to program startup.
+ */
+RTDECL(uint64_t)  RTTimeProgramNanoTS(void);
+
+/**
+ * Get the microsecond timestamp relative to program startup.
+ *
+ * @returns Timestamp relative to program startup.
+ */
+RTDECL(uint64_t)  RTTimeProgramMicroTS(void);
+
+/**
+ * Get the millisecond timestamp relative to program startup.
+ *
+ * @returns Timestamp relative to program startup.
+ */
+RTDECL(uint64_t)  RTTimeProgramMilliTS(void);
+
+/**
+ * Get the second timestamp relative to program startup.
+ *
+ * @returns Timestamp relative to program startup.
+ */
+RTDECL(uint32_t)  RTTimeProgramSecTS(void);
+
+/**
+ * Get the RTTimeNanoTS() of when the program started.
+ *
+ * @returns Program startup timestamp.
+ */
+RTDECL(uint64_t) RTTimeProgramStartNanoTS(void);
+
+
+/**
+ * Time zone information.
+ */
+typedef struct RTTIMEZONEINFO
+{
+    /** Unix time zone name (continent/country[/city]|). */
+    const char     *pszUnixName;
+    /** Windows time zone name.   */
+    const char     *pszWindowsName;
+    /** The length of the unix time zone name. */
+    uint8_t         cchUnixName;
+    /** The length of the windows time zone name. */
+    uint8_t         cchWindowsName;
+    /** Two letter country/territory code if applicable, otherwise 'ZZ'. */
+    char            szCountry[3];
+    /** Two letter windows country/territory code if applicable.
+     * Empty string if no windows mapping. */
+    char            szWindowsCountry[3];
+#if 0 /* Add when needed and it's been extracted. */
+    /** The standard delta in minutes (add to UTC). */
+    int16_t         cMinStdDelta;
+    /** The daylight saving time delta in minutes (add to UTC). */
+    int16_t         cMinDstDelta;
+#endif
+    /** closest matching windows time zone index. */
+    uint32_t        idxWindows;
+    /** Flags, RTTIMEZONEINFO_F_XXX. */
+    uint32_t        fFlags;
+} RTTIMEZONEINFO;
+/** Pointer to time zone info.   */
+typedef RTTIMEZONEINFO const *PCRTTIMEZONEINFO;
+
+/** @name RTTIMEZONEINFO_F_XXX - time zone info flags.
+ *  @{ */
+/** Indicates golden mapping entry for a windows time zone name. */
+#define RTTIMEZONEINFO_F_GOLDEN         RT_BIT_32(0)
+/** @} */
+
+/**
+ * Looks up static time zone information by unix name.
+ *
+ * @returns Pointer to info entry if found, NULL if not.
+ * @param   pszName     The unix zone name (TZ).
+ */
+RTDECL(PCRTTIMEZONEINFO) RTTimeZoneGetInfoByUnixName(const char *pszName);
+
+/**
+ * Looks up static time zone information by window name.
+ *
+ * @returns Pointer to info entry if found, NULL if not.
+ * @param   pszName     The windows zone name (reg key).
+ */
+RTDECL(PCRTTIMEZONEINFO) RTTimeZoneGetInfoByWindowsName(const char *pszName);
+
+/**
+ * Looks up static time zone information by windows index.
+ *
+ * @returns Pointer to info entry if found, NULL if not.
+ * @param   idxZone     The windows timezone index.
+ */
+RTDECL(PCRTTIMEZONEINFO) RTTimeZoneGetInfoByWindowsIndex(uint32_t idxZone);
+
+/**
+ * Get the current time zone (TZ).
+ *
+ * @returns IPRT status code.
+ * @param   pszName     Where to return the time zone name.
+ * @param   cbName      The size of the name buffer.
+ */
+RTDECL(int) RTTimeZoneGetCurrent(char *pszName, size_t cbName);
+
+/** @} */
+
+RT_C_DECLS_END
+
+#endif /* !IPRT_INCLUDED_time_h */
+