Adding upstream version 6.0.4-dfsg.upstream/6.0.4-dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 707 insertions, 0 deletions

diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/nblayer.c b/src/libs/xpcom18a4/nsprpub/pr/tests/nblayer.c
new file mode 100644
index 00000000..4ecc955c
--- /dev/null
+++ b/src/libs/xpcom18a4/nsprpub/pr/tests/nblayer.c
@@ -0,0 +1,707 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape Portable Runtime (NSPR).
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#include "prio.h"
+#include "prmem.h"
+#include "prprf.h"
+#include "prlog.h"
+#include "prerror.h"
+#include "prnetdb.h"
+#include "prthread.h"
+
+#include "plerror.h"
+#include "plgetopt.h"
+#include "prwin16.h"
+
+#include <stdlib.h>
+#include <string.h>
+
+/*
+** Testing layering of I/O
+**
+**      The layered server
+** A thread that acts as a server. It creates a TCP listener with a dummy
+** layer pushed on top. Then listens for incoming connections. Each connection
+** request for connection will be layered as well, accept one request, echo
+** it back and close.
+**
+**      The layered client
+** Pretty much what you'd expect.
+*/
+
+static PRFileDesc *logFile;
+static PRDescIdentity identity;
+static PRNetAddr server_address;
+
+static PRIOMethods myMethods;
+
+typedef enum {rcv_get_debit, rcv_send_credit, rcv_data} RcvState;
+typedef enum {xmt_send_debit, xmt_recv_credit, xmt_data} XmtState;
+
+struct PRFilePrivate
+{
+    RcvState rcvstate;
+    XmtState xmtstate;
+    PRInt32 rcvreq, rcvinprogress;
+    PRInt32 xmtreq, xmtinprogress;
+};
+
+typedef enum Verbosity {silent, quiet, chatty, noisy} Verbosity;
+
+static PRIntn minor_iterations = 5;
+static PRIntn major_iterations = 1;
+static Verbosity verbosity = quiet;
+static PRUint16 default_port = 12273;
+
+static PRFileDesc *PushLayer(PRFileDesc *stack)
+{
+    PRStatus rv;
+    PRFileDesc *layer = PR_CreateIOLayerStub(identity, &myMethods);
+    layer->secret = PR_NEWZAP(PRFilePrivate);
+    rv = PR_PushIOLayer(stack, PR_GetLayersIdentity(stack), layer);
+    PR_ASSERT(PR_SUCCESS == rv);
+    if (verbosity > quiet)
+        PR_fprintf(logFile, "Pushed layer(0x%x) onto stack(0x%x)\n", layer, stack);
+    return stack;
+}  /* PushLayer */
+
+static PRFileDesc *PopLayer(PRFileDesc *stack)
+{
+    PRFileDesc *popped = PR_PopIOLayer(stack, identity);
+    if (verbosity > quiet)
+        PR_fprintf(logFile, "Popped layer(0x%x) from stack(0x%x)\n", popped, stack);
+    PR_DELETE(popped->secret);
+    popped->dtor(popped);
+    return stack;
+}  /* PopLayer */
+
+static void PR_CALLBACK Client(void *arg)
+{
+    PRStatus rv;
+    PRIntn mits;
+    PRInt32 ready;
+    PRUint8 buffer[100];
+    PRPollDesc polldesc;
+    PRIntn empty_flags = 0;
+    PRIntn bytes_read, bytes_sent;
+    PRFileDesc *stack = (PRFileDesc*)arg;
+
+    /* Initialize the buffer so that Purify won't complain */
+    memset(buffer, 0, sizeof(buffer));
+
+    rv = PR_Connect(stack, &server_address, PR_INTERVAL_NO_TIMEOUT);
+    if ((PR_FAILURE == rv) && (PR_IN_PROGRESS_ERROR == PR_GetError()))
+    {
+        if (verbosity > quiet)
+            PR_fprintf(logFile, "Client connect 'in progress'\n");
+        do
+        {
+            polldesc.fd = stack;
+            polldesc.out_flags = 0;
+            polldesc.in_flags = PR_POLL_WRITE | PR_POLL_EXCEPT;
+            ready = PR_Poll(&polldesc, 1, PR_INTERVAL_NO_TIMEOUT);
+            if ((1 != ready)  /* if not 1, then we're dead */
+            || (0 == (polldesc.in_flags & polldesc.out_flags)))
+                { PR_ASSERT(!"Whoa!"); break; }
+            if (verbosity > quiet)
+                PR_fprintf(
+                    logFile, "Client connect 'in progress' [0x%x]\n",
+                    polldesc.out_flags);
+            rv = PR_GetConnectStatus(&polldesc);
+            if ((PR_FAILURE == rv)
+            && (PR_IN_PROGRESS_ERROR != PR_GetError())) break;
+        } while (PR_FAILURE == rv);
+    }
+    PR_ASSERT(PR_SUCCESS == rv);
+    if (verbosity > chatty)
+        PR_fprintf(logFile, "Client created connection\n");
+
+    for (mits = 0; mits < minor_iterations; ++mits)
+    {
+        bytes_sent = 0;
+        if (verbosity > quiet)
+            PR_fprintf(logFile, "Client sending %d bytes\n", sizeof(buffer));
+        do
+        {
+            if (verbosity > chatty)
+                PR_fprintf(
+                    logFile, "Client sending %d bytes\n",
+                    sizeof(buffer) - bytes_sent);
+            ready = PR_Send(
+                stack, buffer + bytes_sent, sizeof(buffer) - bytes_sent,
+                empty_flags, PR_INTERVAL_NO_TIMEOUT);
+            if (verbosity > chatty)
+                PR_fprintf(logFile, "Client send status [%d]\n", ready);
+            if (0 < ready) bytes_sent += ready;
+            else if ((-1 == ready) && (PR_WOULD_BLOCK_ERROR == PR_GetError()))
+            {
+                polldesc.fd = stack;
+                polldesc.out_flags = 0;
+                polldesc.in_flags = PR_POLL_WRITE;
+                ready = PR_Poll(&polldesc, 1, PR_INTERVAL_NO_TIMEOUT);
+                if ((1 != ready)  /* if not 1, then we're dead */
+                || (0 == (polldesc.in_flags & polldesc.out_flags)))
+                    { PR_ASSERT(!"Whoa!"); break; }
+            }
+            else break;
+        } while (bytes_sent < sizeof(buffer));
+        PR_ASSERT(sizeof(buffer) == bytes_sent);
+
+        bytes_read = 0;
+        do
+        {
+            if (verbosity > chatty)
+                PR_fprintf(
+                    logFile, "Client receiving %d bytes\n",
+                    bytes_sent - bytes_read);
+            ready = PR_Recv(
+                stack, buffer + bytes_read, bytes_sent - bytes_read,
+                empty_flags, PR_INTERVAL_NO_TIMEOUT);
+            if (verbosity > chatty)
+                PR_fprintf(
+                    logFile, "Client receive status [%d]\n", ready);
+            if (0 < ready) bytes_read += ready;
+            else if ((-1 == ready) && (PR_WOULD_BLOCK_ERROR == PR_GetError()))
+            {
+                polldesc.fd = stack;
+                polldesc.out_flags = 0;
+                polldesc.in_flags = PR_POLL_READ;
+                ready = PR_Poll(&polldesc, 1, PR_INTERVAL_NO_TIMEOUT);
+                if ((1 != ready)  /* if not 1, then we're dead */
+                || (0 == (polldesc.in_flags & polldesc.out_flags)))
+                    { PR_ASSERT(!"Whoa!"); break; }
+            }
+            else break;
+        } while (bytes_read < bytes_sent);
+        if (verbosity > chatty)
+            PR_fprintf(logFile, "Client received %d bytes\n", bytes_read);
+        PR_ASSERT(bytes_read == bytes_sent);
+    }
+
+    if (verbosity > quiet)
+        PR_fprintf(logFile, "Client shutting down stack\n");
+    
+    rv = PR_Shutdown(stack, PR_SHUTDOWN_BOTH); PR_ASSERT(PR_SUCCESS == rv);
+}  /* Client */
+
+static void PR_CALLBACK Server(void *arg)
+{
+    PRStatus rv;
+    PRInt32 ready;
+    PRUint8 buffer[100];
+    PRFileDesc *service;
+    PRUintn empty_flags = 0;
+    struct PRPollDesc polldesc;
+    PRIntn bytes_read, bytes_sent;
+    PRFileDesc *stack = (PRFileDesc*)arg;
+    PRNetAddr client_address;
+
+    do
+    {
+        if (verbosity > chatty)
+            PR_fprintf(logFile, "Server accepting connection\n");
+        service = PR_Accept(stack, &client_address, PR_INTERVAL_NO_TIMEOUT);
+        if (verbosity > chatty)
+            PR_fprintf(logFile, "Server accept status [0x%p]\n", service);
+        if ((NULL == service) && (PR_WOULD_BLOCK_ERROR == PR_GetError()))
+        {
+            polldesc.fd = stack;
+            polldesc.out_flags = 0;
+            polldesc.in_flags = PR_POLL_READ | PR_POLL_EXCEPT;
+            ready = PR_Poll(&polldesc, 1, PR_INTERVAL_NO_TIMEOUT);
+            if ((1 != ready)  /* if not 1, then we're dead */
+            || (0 == (polldesc.in_flags & polldesc.out_flags)))
+                { PR_ASSERT(!"Whoa!"); break; }
+        }
+    } while (NULL == service);
+    PR_ASSERT(NULL != service);
+        
+    if (verbosity > quiet)
+        PR_fprintf(logFile, "Server accepting connection\n");
+
+    do
+    {
+        bytes_read = 0;
+        do
+        {
+            if (verbosity > chatty)
+                PR_fprintf(
+                    logFile, "Server receiving %d bytes\n",
+                    sizeof(buffer) - bytes_read);
+            ready = PR_Recv(
+                service, buffer + bytes_read, sizeof(buffer) - bytes_read,
+                empty_flags, PR_INTERVAL_NO_TIMEOUT);
+            if (verbosity > chatty)
+                PR_fprintf(logFile, "Server receive status [%d]\n", ready);
+            if (0 < ready) bytes_read += ready;
+            else if ((-1 == ready) && (PR_WOULD_BLOCK_ERROR == PR_GetError()))
+            {
+                polldesc.fd = service;
+                polldesc.out_flags = 0;
+                polldesc.in_flags = PR_POLL_READ;
+                ready = PR_Poll(&polldesc, 1, PR_INTERVAL_NO_TIMEOUT);
+                if ((1 != ready)  /* if not 1, then we're dead */
+                || (0 == (polldesc.in_flags & polldesc.out_flags)))
+                    { PR_ASSERT(!"Whoa!"); break; }
+            }
+            else break;
+        } while (bytes_read < sizeof(buffer));
+
+        if (0 != bytes_read)
+        {
+            if (verbosity > chatty)
+                PR_fprintf(logFile, "Server received %d bytes\n", bytes_read);
+            PR_ASSERT(bytes_read > 0);
+
+            bytes_sent = 0;
+            do
+            {
+                ready = PR_Send(
+                    service, buffer + bytes_sent, bytes_read - bytes_sent,
+                    empty_flags, PR_INTERVAL_NO_TIMEOUT);
+                if (0 < ready)
+                {
+                    bytes_sent += ready;
+                }
+                else if ((-1 == ready) && (PR_WOULD_BLOCK_ERROR == PR_GetError()))
+                {
+                    polldesc.fd = service;
+                    polldesc.out_flags = 0;
+                    polldesc.in_flags = PR_POLL_WRITE;
+                    ready = PR_Poll(&polldesc, 1, PR_INTERVAL_NO_TIMEOUT);
+                    if ((1 != ready)  /* if not 1, then we're dead */
+                    || (0 == (polldesc.in_flags & polldesc.out_flags)))
+                        { PR_ASSERT(!"Whoa!"); break; }
+                }
+                else break;
+            } while (bytes_sent < bytes_read);
+            PR_ASSERT(bytes_read == bytes_sent);
+            if (verbosity > chatty)
+                PR_fprintf(logFile, "Server sent %d bytes\n", bytes_sent);
+        }
+    } while (0 != bytes_read);
+
+    if (verbosity > quiet)
+        PR_fprintf(logFile, "Server shutting down stack\n");
+    rv = PR_Shutdown(service, PR_SHUTDOWN_BOTH); PR_ASSERT(PR_SUCCESS == rv);
+    rv = PR_Close(service); PR_ASSERT(PR_SUCCESS == rv);
+
+}  /* Server */
+
+static PRStatus PR_CALLBACK MyClose(PRFileDesc *fd)
+{
+    PR_DELETE(fd->secret);  /* manage my secret file object */
+    return (PR_GetDefaultIOMethods())->close(fd);  /* let him do all the work */
+}  /* MyClose */
+
+static PRInt16 PR_CALLBACK MyPoll(
+    PRFileDesc *fd, PRInt16 in_flags, PRInt16 *out_flags)
+{
+    PRInt16 my_flags, new_flags;
+    PRFilePrivate *mine = (PRFilePrivate*)fd->secret;
+    if (0 != (PR_POLL_READ & in_flags))
+    {
+        /* client thinks he's reading */
+        switch (mine->rcvstate)
+        {
+            case rcv_send_credit:
+                my_flags = (in_flags & ~PR_POLL_READ) | PR_POLL_WRITE;
+                break;
+            case rcv_data:
+            case rcv_get_debit:
+                my_flags = in_flags;
+            default: break;
+        }
+    }
+    else if (0 != (PR_POLL_WRITE & in_flags))
+    {
+        /* client thinks he's writing */
+        switch (mine->xmtstate)
+        {
+            case xmt_recv_credit:
+                my_flags = (in_flags & ~PR_POLL_WRITE) | PR_POLL_READ;
+                break;
+            case xmt_send_debit:
+            case xmt_data:
+                my_flags = in_flags;
+            default: break;
+        }
+    }
+    else PR_ASSERT(!"How'd I get here?");
+    new_flags = (fd->lower->methods->poll)(fd->lower, my_flags, out_flags);
+    if (verbosity > chatty)
+        PR_fprintf(
+            logFile, "Poll [i: 0x%x, m: 0x%x, o: 0x%x, n: 0x%x]\n",
+            in_flags, my_flags, *out_flags, new_flags);
+    return new_flags;
+}  /* MyPoll */
+
+static PRFileDesc * PR_CALLBACK MyAccept(
+    PRFileDesc *fd, PRNetAddr *addr, PRIntervalTime timeout)
+{
+    PRStatus rv;
+    PRFileDesc *newfd, *layer = fd;
+    PRFileDesc *newstack;
+    PRFilePrivate *newsecret;
+
+    PR_ASSERT(fd != NULL);
+    PR_ASSERT(fd->lower != NULL);
+
+    newstack = PR_NEW(PRFileDesc);
+    if (NULL == newstack)
+    {
+        PR_SetError(PR_OUT_OF_MEMORY_ERROR, 0);
+        return NULL;
+    }
+    newsecret = PR_NEW(PRFilePrivate);
+    if (NULL == newsecret)
+    {
+        PR_DELETE(newstack);
+        PR_SetError(PR_OUT_OF_MEMORY_ERROR, 0);
+        return NULL;
+    }
+    *newstack = *fd;  /* make a copy of the accepting layer */
+    *newsecret = *fd->secret;
+    newstack->secret = newsecret;
+
+    newfd = (fd->lower->methods->accept)(fd->lower, addr, timeout);
+    if (NULL == newfd)
+    {
+        PR_DELETE(newsecret);
+        PR_DELETE(newstack);
+        return NULL;
+    }
+
+    /* this PR_PushIOLayer call cannot fail */
+    rv = PR_PushIOLayer(newfd, PR_TOP_IO_LAYER, newstack);
+    PR_ASSERT(PR_SUCCESS == rv);
+    return newfd;  /* that's it */
+}
+
+static PRInt32 PR_CALLBACK MyRecv(
+    PRFileDesc *fd, void *buf, PRInt32 amount,
+    PRIntn flags, PRIntervalTime timeout)
+{
+    char *b;
+    PRInt32 rv;
+    PRFileDesc *lo = fd->lower;
+    PRFilePrivate *mine = (PRFilePrivate*)fd->secret;
+
+    do
+    {
+        switch (mine->rcvstate)
+        {
+        case rcv_get_debit:
+            b = (char*)&mine->rcvreq;
+            mine->rcvreq = amount;
+            rv = lo->methods->recv(
+                lo, b + mine->rcvinprogress,
+                sizeof(mine->rcvreq) - mine->rcvinprogress, flags, timeout);
+            if (0 == rv) goto closed;
+            if ((-1 == rv) && (PR_WOULD_BLOCK_ERROR == PR_GetError())) break;
+            mine->rcvinprogress += rv;  /* accumulate the read */
+            if (mine->rcvinprogress < sizeof(mine->rcvreq)) break;  /* loop */
+            mine->rcvstate = rcv_send_credit;
+            mine->rcvinprogress = 0;
+        case rcv_send_credit:
+            b = (char*)&mine->rcvreq;
+            rv = lo->methods->send(
+                lo, b + mine->rcvinprogress,
+                sizeof(mine->rcvreq) - mine->rcvinprogress, flags, timeout);
+            if ((-1 == rv) && (PR_WOULD_BLOCK_ERROR == PR_GetError())) break;
+            mine->rcvinprogress += rv;  /* accumulate the read */
+            if (mine->rcvinprogress < sizeof(mine->rcvreq)) break;  /* loop */
+            mine->rcvstate = rcv_data;
+            mine->rcvinprogress = 0;
+        case rcv_data:
+            b = (char*)buf;
+            rv = lo->methods->recv(
+                lo, b + mine->rcvinprogress,
+                mine->rcvreq - mine->rcvinprogress, flags, timeout);
+            if (0 == rv) goto closed;
+            if ((-1 == rv) && (PR_WOULD_BLOCK_ERROR == PR_GetError())) break;
+            mine->rcvinprogress += rv;  /* accumulate the read */
+            if (mine->rcvinprogress < amount) break;  /* loop */
+            mine->rcvstate = rcv_get_debit;
+            mine->rcvinprogress = 0;
+            return mine->rcvreq;  /* << -- that's it! */
+        default:
+            break;
+        }
+    } while (-1 != rv);
+    return rv;
+closed:
+    mine->rcvinprogress = 0;
+    mine->rcvstate = rcv_get_debit;
+    return 0;
+}  /* MyRecv */
+
+static PRInt32 PR_CALLBACK MySend(
+    PRFileDesc *fd, const void *buf, PRInt32 amount,
+    PRIntn flags, PRIntervalTime timeout)
+{
+    char *b;
+    PRInt32 rv;
+    PRFileDesc *lo = fd->lower;
+    PRFilePrivate *mine = (PRFilePrivate*)fd->secret;
+
+    do
+    {
+        switch (mine->xmtstate)
+        {
+        case xmt_send_debit:
+            b = (char*)&mine->xmtreq;
+            mine->xmtreq = amount;
+            rv = lo->methods->send(
+                lo, b - mine->xmtinprogress,
+                sizeof(mine->xmtreq) - mine->xmtinprogress, flags, timeout);
+            if ((-1 == rv) && (PR_WOULD_BLOCK_ERROR == PR_GetError())) break;
+            mine->xmtinprogress += rv;
+            if (mine->xmtinprogress < sizeof(mine->xmtreq)) break;
+            mine->xmtstate = xmt_recv_credit;
+            mine->xmtinprogress = 0;
+        case xmt_recv_credit:
+             b = (char*)&mine->xmtreq;
+             rv = lo->methods->recv(
+                lo, b + mine->xmtinprogress,
+                sizeof(mine->xmtreq) - mine->xmtinprogress, flags, timeout);
+            if ((-1 == rv) && (PR_WOULD_BLOCK_ERROR == PR_GetError())) break;
+            mine->xmtinprogress += rv;
+            if (mine->xmtinprogress < sizeof(mine->xmtreq)) break;
+            mine->xmtstate = xmt_data;
+            mine->xmtinprogress = 0;
+        case xmt_data:
+            b = (char*)buf;
+            rv = lo->methods->send(
+                lo, b + mine->xmtinprogress,
+                mine->xmtreq - mine->xmtinprogress, flags, timeout);
+            if ((-1 == rv) && (PR_WOULD_BLOCK_ERROR == PR_GetError())) break;
+            mine->xmtinprogress += rv;
+            if (mine->xmtinprogress < amount) break;
+            mine->xmtstate = xmt_send_debit;
+            mine->xmtinprogress = 0;
+            return mine->xmtreq;  /* <<-- That's the one! */
+        default:
+            break;
+        }
+    } while (-1 != rv);
+    return rv;
+}  /* MySend */
+
+static Verbosity ChangeVerbosity(Verbosity verbosity, PRIntn delta)
+{
+    PRIntn verbage = (PRIntn)verbosity + delta;
+    if (verbage < (PRIntn)silent) verbage = (PRIntn)silent;
+    else if (verbage > (PRIntn)noisy) verbage = (PRIntn)noisy;
+    return (Verbosity)verbage;
+}  /* ChangeVerbosity */
+
+PRIntn main(PRIntn argc, char **argv)
+{
+    PRStatus rv;
+    PLOptStatus os;
+    PRFileDesc *client, *service;
+    PRNetAddr any_address;
+    const char *server_name = NULL;
+    const PRIOMethods *stubMethods;
+    PRThread *client_thread, *server_thread;
+    PRThreadScope thread_scope = PR_LOCAL_THREAD;
+    PRSocketOptionData socket_noblock, socket_nodelay;
+    PLOptState *opt = PL_CreateOptState(argc, argv, "dqGC:c:p:");
+    while (PL_OPT_EOL != (os = PL_GetNextOpt(opt)))
+    {
+        if (PL_OPT_BAD == os) continue;
+        switch (opt->option)
+        {
+        case 0:
+            server_name = opt->value;
+            break;
+        case 'd':  /* debug mode */
+            if (verbosity < noisy)
+                verbosity = ChangeVerbosity(verbosity, 1);
+            break;
+        case 'q':  /* debug mode */
+            if (verbosity > silent)
+                verbosity = ChangeVerbosity(verbosity, -1);
+            break;
+        case 'G':  /* use global threads */
+            thread_scope = PR_GLOBAL_THREAD;
+            break;
+        case 'C':  /* number of threads waiting */
+            major_iterations = atoi(opt->value);
+            break;
+        case 'c':  /* number of client threads */
+            minor_iterations = atoi(opt->value);
+            break;
+        case 'p':  /* default port */
+            default_port = atoi(opt->value);
+            break;
+        default:
+            break;
+        }
+    }
+    PL_DestroyOptState(opt);
+    PR_STDIO_INIT();
+
+    logFile = PR_GetSpecialFD(PR_StandardError);
+    identity = PR_GetUniqueIdentity("Dummy");
+    stubMethods = PR_GetDefaultIOMethods();
+
+    /*
+    ** The protocol we're going to implement is one where in order to initiate
+    ** a send, the sender must first solicit permission. Therefore, every
+    ** send is really a send - receive - send sequence.
+    */
+    myMethods = *stubMethods;  /* first get the entire batch */
+    myMethods.accept = MyAccept;  /* then override the ones we care about */
+    myMethods.recv = MyRecv;  /* then override the ones we care about */
+    myMethods.send = MySend;  /* then override the ones we care about */
+    myMethods.close = MyClose;  /* then override the ones we care about */
+    myMethods.poll = MyPoll;  /* then override the ones we care about */
+
+    if (NULL == server_name)
+        rv = PR_InitializeNetAddr(
+            PR_IpAddrLoopback, default_port, &server_address);
+    else
+    {
+        rv = PR_StringToNetAddr(server_name, &server_address);
+        PR_ASSERT(PR_SUCCESS == rv);
+        rv = PR_InitializeNetAddr(
+            PR_IpAddrNull, default_port, &server_address);
+    }
+    PR_ASSERT(PR_SUCCESS == rv);
+
+    socket_noblock.value.non_blocking = PR_TRUE;
+    socket_noblock.option = PR_SockOpt_Nonblocking;
+    socket_nodelay.value.no_delay = PR_TRUE;
+    socket_nodelay.option = PR_SockOpt_NoDelay;
+
+    /* one type w/o layering */
+
+    while (major_iterations-- > 0)
+    {
+        if (verbosity > silent)
+            PR_fprintf(logFile, "Beginning non-layered test\n");
+
+        client = PR_NewTCPSocket(); PR_ASSERT(NULL != client);
+        service = PR_NewTCPSocket(); PR_ASSERT(NULL != service);
+
+        rv = PR_SetSocketOption(client, &socket_noblock);
+        PR_ASSERT(PR_SUCCESS == rv);
+        rv = PR_SetSocketOption(service, &socket_noblock);
+        PR_ASSERT(PR_SUCCESS == rv);
+        rv = PR_SetSocketOption(client, &socket_nodelay);
+        PR_ASSERT(PR_SUCCESS == rv);
+        rv = PR_SetSocketOption(service, &socket_nodelay);
+        PR_ASSERT(PR_SUCCESS == rv);
+
+        rv = PR_InitializeNetAddr(PR_IpAddrAny, default_port, &any_address);
+        PR_ASSERT(PR_SUCCESS == rv);
+        rv = PR_Bind(service, &any_address); PR_ASSERT(PR_SUCCESS == rv);
+        rv = PR_Listen(service, 10); PR_ASSERT(PR_SUCCESS == rv);
+
+        server_thread = PR_CreateThread(
+            PR_USER_THREAD, Server, service,
+            PR_PRIORITY_HIGH, thread_scope,
+            PR_JOINABLE_THREAD, 16 * 1024);
+        PR_ASSERT(NULL != server_thread);
+
+        client_thread = PR_CreateThread(
+            PR_USER_THREAD, Client, client,
+            PR_PRIORITY_NORMAL, thread_scope,
+            PR_JOINABLE_THREAD, 16 * 1024);
+        PR_ASSERT(NULL != client_thread);
+
+        rv = PR_JoinThread(client_thread);
+        PR_ASSERT(PR_SUCCESS == rv);
+        rv = PR_JoinThread(server_thread);
+        PR_ASSERT(PR_SUCCESS == rv);
+
+        rv = PR_Close(client); PR_ASSERT(PR_SUCCESS == rv);
+        rv = PR_Close(service); PR_ASSERT(PR_SUCCESS == rv);
+        if (verbosity > silent)
+            PR_fprintf(logFile, "Ending non-layered test\n");
+
+        /* with layering */
+        if (verbosity > silent)
+            PR_fprintf(logFile, "Beginning layered test\n");
+        client = PR_NewTCPSocket(); PR_ASSERT(NULL != client);
+        service = PR_NewTCPSocket(); PR_ASSERT(NULL != service);
+
+        rv = PR_SetSocketOption(client, &socket_noblock);
+        PR_ASSERT(PR_SUCCESS == rv);
+        rv = PR_SetSocketOption(service, &socket_noblock);
+        PR_ASSERT(PR_SUCCESS == rv);
+        rv = PR_SetSocketOption(client, &socket_nodelay);
+        PR_ASSERT(PR_SUCCESS == rv);
+        rv = PR_SetSocketOption(service, &socket_nodelay);
+        PR_ASSERT(PR_SUCCESS == rv);
+
+        PushLayer(client);
+        PushLayer(service);
+
+        rv = PR_InitializeNetAddr(PR_IpAddrAny, default_port, &any_address);
+        PR_ASSERT(PR_SUCCESS == rv);
+        rv = PR_Bind(service, &any_address); PR_ASSERT(PR_SUCCESS == rv);
+        rv = PR_Listen(service, 10); PR_ASSERT(PR_SUCCESS == rv);
+
+        server_thread = PR_CreateThread(
+            PR_USER_THREAD, Server, service,
+            PR_PRIORITY_HIGH, thread_scope,
+            PR_JOINABLE_THREAD, 16 * 1024);
+        PR_ASSERT(NULL != server_thread);
+
+        client_thread = PR_CreateThread(
+            PR_USER_THREAD, Client, client,
+            PR_PRIORITY_NORMAL, thread_scope,
+            PR_JOINABLE_THREAD, 16 * 1024);
+        PR_ASSERT(NULL != client_thread);
+
+        rv = PR_JoinThread(client_thread);
+        PR_ASSERT(PR_SUCCESS == rv);
+        rv = PR_JoinThread(server_thread);
+        PR_ASSERT(PR_SUCCESS == rv);
+
+        rv = PR_Close(PopLayer(client)); PR_ASSERT(PR_SUCCESS == rv);
+        rv = PR_Close(PopLayer(service)); PR_ASSERT(PR_SUCCESS == rv);
+        if (verbosity > silent)
+            PR_fprintf(logFile, "Ending layered test\n");
+    }
+    return 0;
+}  /* main */
+
+/* nblayer.c */