Adding upstream version 6.0.4-dfsg.upstream/6.0.4-dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 354 insertions, 0 deletions

diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/select2.c b/src/libs/xpcom18a4/nsprpub/pr/tests/select2.c
new file mode 100644
index 00000000..0651c450
--- /dev/null
+++ b/src/libs/xpcom18a4/nsprpub/pr/tests/select2.c
@@ -0,0 +1,354 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape Portable Runtime (NSPR).
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+/***********************************************************************
+**
+** Name: select2.c
+**
+** Description: Measure PR_Select and Empty_Select performance.
+**
+** Modification History:
+** 20-May-97 AGarcia- Converted the test to accomodate the debug_mode flag.
+**	         The debug mode will print all of the printfs associated with this test.
+**			 The regress mode will be the default mode. Since the regress tool limits
+**           the output to a one line status:PASS or FAIL,all of the printf statements
+**			 have been handled with an if (debug_mode) statement. 
+***********************************************************************/
+
+/***********************************************************************
+** Includes
+***********************************************************************/
+/* Used to get the command line option */
+#include "plgetopt.h"
+#include "prttools.h"
+#include "primpl.h"
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#if defined(OS2)
+#include <sys/time.h>
+#endif
+
+#define PORT 8000
+#define DEFAULT_COUNT 10
+PRInt32 count;
+
+
+/***********************************************************************
+** PRIVATE FUNCTION:    Test_Result
+** DESCRIPTION: Used in conjunction with the regress tool, prints out the
+**				status of the test case.
+** INPUTS:      PASS/FAIL
+** OUTPUTS:     None
+** RETURN:      None
+** SIDE EFFECTS:
+**      
+** RESTRICTIONS:
+**      None
+** MEMORY:      NA
+** ALGORITHM:   Determine what the status is and print accordingly.
+**      
+***********************************************************************/
+
+
+static void Test_Result (int result)
+{
+	switch (result)
+	{
+		case PASS:
+			printf ("PASS\n");
+			break;
+		case FAIL:
+			printf ("FAIL\n");
+			break;
+		default:
+			printf ("NOSTATUS\n");
+			break;
+	}
+}
+
+static void EmptyPRSelect(void)
+{
+    PRInt32 index = count;
+    PRInt32 rv;
+
+    for (; index--;)
+        rv = PR_Select(0, NULL, NULL, NULL, PR_INTERVAL_NO_WAIT);
+}
+
+static void EmptyNativeSelect(void)
+{
+    PRInt32 rv;
+    PRInt32 index = count;
+    struct timeval timeout;
+
+    timeout.tv_sec = timeout.tv_usec = 0;
+    for (; index--;)
+        rv = select(0, NULL, NULL, NULL, &timeout);
+}
+
+static void PRSelectTest(void)
+{
+    PRFileDesc *listenSocket;
+    PRNetAddr serverAddr;
+
+    if ( (listenSocket = PR_NewTCPSocket()) == NULL) {
+        if (debug_mode) printf("\tServer error creating listen socket\n");
+        return;
+    }
+
+    memset(&serverAddr, 0, sizeof(PRNetAddr));
+    serverAddr.inet.family = AF_INET;
+    serverAddr.inet.port = PR_htons(PORT);
+    serverAddr.inet.ip = PR_htonl(INADDR_ANY);
+
+    if ( PR_Bind(listenSocket, &serverAddr) == PR_FAILURE) {
+        if (debug_mode) printf("\tServer error binding to server address\n");
+        PR_Close(listenSocket);
+        return;
+    }
+
+    if ( PR_Listen(listenSocket, 128) == PR_FAILURE) {
+        if (debug_mode) printf("\tServer error listening to server socket\n");
+        PR_Close(listenSocket);
+        return;
+    }
+    if (debug_mode) printf("Listening on port %d\n", PORT);
+
+    {
+        PRFileDesc *newSock;
+        PRNetAddr rAddr;
+        PRInt32 loops = 0;
+        PR_fd_set rdset;
+        PRInt32 rv;
+        PRInt32 bytesRead;
+        char buf[11];
+
+        loops++;
+
+        if (debug_mode) printf("Going into accept\n"); 
+
+        newSock = PR_Accept(listenSocket, 
+                              &rAddr,
+                              PR_INTERVAL_NO_TIMEOUT);
+
+	if (newSock) {
+            if (debug_mode) printf("Got connection!\n");
+        } else {
+	    if (debug_mode) printf("PR_Accept failed: error code %d\n", PR_GetError());
+		else Test_Result (FAIL);
+        }
+
+        PR_FD_ZERO(&rdset);
+        PR_FD_SET(newSock, &rdset);
+
+        if (debug_mode) printf("Going into select \n");
+
+        rv = PR_Select(0, &rdset, 0, 0, PR_INTERVAL_NO_TIMEOUT);
+
+        if (debug_mode) printf("return from select is %d\n", rv);
+
+        if (PR_FD_ISSET(newSock, &rdset)) {
+            if (debug_mode) printf("I can't believe it- the socket is ready okay!\n");
+        } else {
+            if (debug_mode) printf("Damn; the select test failed...\n");
+			else Test_Result (FAIL);
+        }
+
+        strcpy(buf, "XXXXXXXXXX");
+        bytesRead = PR_Recv(newSock, buf, 10, 0, PR_INTERVAL_NO_TIMEOUT);
+	buf[10] = '\0';
+
+        if (debug_mode) printf("Recv completed with %d bytes, %s\n", bytesRead, buf);
+
+        PR_Close(newSock);
+    }
+
+}
+
+#if defined(XP_UNIX)
+
+static void NativeSelectTest(void)
+{
+    PRFileDesc *listenSocket;
+    PRNetAddr serverAddr;
+
+    if ( (listenSocket = PR_NewTCPSocket()) == NULL) {
+        if (debug_mode) printf("\tServer error creating listen socket\n");
+        return;
+    }
+
+    memset(&serverAddr, 0, sizeof(PRNetAddr));
+    serverAddr.inet.family = AF_INET;
+    serverAddr.inet.port = PR_htons(PORT);
+    serverAddr.inet.ip = PR_htonl(INADDR_ANY);
+
+    if ( PR_Bind(listenSocket, &serverAddr) == PR_FAILURE) {
+        if (debug_mode) printf("\tServer error binding to server address\n");
+        PR_Close(listenSocket);
+        return;
+    }
+
+    if ( PR_Listen(listenSocket, 128) == PR_FAILURE) {
+        if (debug_mode) printf("\tServer error listening to server socket\n");
+        PR_Close(listenSocket);
+        return;
+    }
+    if (debug_mode) printf("Listening on port %d\n", PORT);
+
+    {
+        PRIntn osfd;
+        char buf[11];
+        fd_set rdset;
+        PRNetAddr rAddr;
+        PRFileDesc *newSock;
+        struct timeval timeout;
+        PRInt32 bytesRead, rv, loops = 0;
+
+        loops++;
+
+        if (debug_mode) printf("Going into accept\n"); 
+
+        newSock = PR_Accept(listenSocket, &rAddr, PR_INTERVAL_NO_TIMEOUT);
+
+	if (newSock) {
+            if (debug_mode) printf("Got connection!\n");
+        } else {
+	    if (debug_mode) printf("PR_Accept failed: error code %d\n", PR_GetError());
+		else Test_Result (FAIL);
+        }
+
+        osfd = PR_FileDesc2NativeHandle(newSock);
+        FD_ZERO(&rdset);
+        FD_SET(osfd, &rdset);
+
+        if (debug_mode) printf("Going into select \n");
+
+
+        timeout.tv_sec = 2; timeout.tv_usec = 0;
+        rv = select(osfd + 1, &rdset, NULL, NULL, &timeout);
+
+        if (debug_mode) printf("return from select is %d\n", rv);
+
+        if (FD_ISSET(osfd, &rdset)) {
+            if (debug_mode)
+                printf("I can't believe it- the socket is ready okay!\n");
+        } else {
+            if (debug_mode) printf("Damn; the select test failed...\n");
+			else Test_Result (FAIL);
+        }
+
+        strcpy(buf, "XXXXXXXXXX");
+        bytesRead = PR_Recv(newSock, buf, 10, 0, PR_INTERVAL_NO_TIMEOUT);
+	buf[10] = '\0';
+
+        if (debug_mode) printf("Recv completed with %d bytes, %s\n", bytesRead, buf);
+
+        PR_Close(newSock);
+    }
+
+}  /* NativeSelectTest */
+
+#endif /* defined(XP_UNIX) */
+
+/************************************************************************/
+
+static void Measure(void (*func)(void), const char *msg)
+{
+    PRIntervalTime start, stop;
+    double d;
+    PRInt32 tot;
+
+    start = PR_IntervalNow();
+    (*func)();
+    stop = PR_IntervalNow();
+
+    d = (double)PR_IntervalToMicroseconds(stop - start);
+    tot = PR_IntervalToMilliseconds(stop-start);
+
+    if (debug_mode) printf("%40s: %6.2f usec avg, %d msec total\n", msg, d / count, tot);
+}
+
+void main(int argc, char **argv)
+{
+	
+	/* The command line argument: -d is used to determine if the test is being run
+	in debug mode. The regress tool requires only one line output:PASS or FAIL.
+	All of the printfs associated with this test has been handled with a if (debug_mode)
+	test.
+	Usage: test_name -d
+	*/
+	PLOptStatus os;
+	PLOptState *opt = PL_CreateOptState(argc, argv, "d:");
+	while (PL_OPT_EOL != (os = PL_GetNextOpt(opt)))
+    {
+		if (PL_OPT_BAD == os) continue;
+        switch (opt->option)
+        {
+        case 'd':  /* debug mode */
+			debug_mode = 1;
+            break;
+         default:
+            break;
+        }
+    }
+	PL_DestroyOptState(opt);
+
+ /* main test */
+	
+    PR_Init(PR_USER_THREAD, PR_PRIORITY_NORMAL, 0);
+    PR_STDIO_INIT();
+
+    if (argc > 2) {
+	count = atoi(argv[2]);
+    } else {
+	count = DEFAULT_COUNT;
+    }
+
+#if defined(XP_UNIX)
+    Measure(NativeSelectTest, "time to call 1 element select()");
+#endif
+    Measure(EmptyPRSelect, "time to call Empty PR_select()");
+    Measure(EmptyNativeSelect, "time to call Empty select()");
+    Measure(PRSelectTest, "time to call 1 element PR_select()");
+
+	if (!debug_mode) Test_Result (NOSTATUS);
+    PR_Cleanup();
+
+
+}