diff options
Diffstat (limited to 'include/VBox/scsi.h')
| -rw-r--r-- | include/VBox/scsi.h | 325 |
1 files changed, 325 insertions, 0 deletions
diff --git a/include/VBox/scsi.h b/include/VBox/scsi.h new file mode 100644 index 00000000..43875443 --- /dev/null +++ b/include/VBox/scsi.h @@ -0,0 +1,325 @@ +/** @file + * VirtualBox - SCSI declarations. (DEV,+) + */ + +/* + * Copyright (C) 2006-2019 Oracle Corporation + * + * This file is part of VirtualBox Open Source Edition (OSE), as + * available from http://www.virtualbox.org. This file is free software; + * you can redistribute it and/or modify it under the terms of the GNU + * General Public License (GPL) as published by the Free Software + * Foundation, in version 2 as it comes in the "COPYING" file of the + * VirtualBox OSE distribution. VirtualBox OSE is distributed in the + * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. + * + * The contents of this file may alternatively be used under the terms + * of the Common Development and Distribution License Version 1.0 + * (CDDL) only, as it comes in the "COPYING.CDDL" file of the + * VirtualBox OSE distribution, in which case the provisions of the + * CDDL are applicable instead of those of the GPL. + * + * You may elect to license modified versions of this file under the + * terms and conditions of either the GPL or the CDDL or both. + */ + +#ifndef VBOX_INCLUDED_scsi_h +#define VBOX_INCLUDED_scsi_h +#ifndef RT_WITHOUT_PRAGMA_ONCE +# pragma once +#endif + +#include <iprt/assert.h> + +/** + * @todo: Remove when the splitting code was removed from DevATA. + * The limit doesn't belong here but is specific for each host platform. + */ +#ifdef RT_OS_FREEBSD +/* The cam subsystem doesn't allow more */ +# define SCSI_MAX_BUFFER_SIZE (64 * _1K) +#else +# define SCSI_MAX_BUFFER_SIZE (100 * _1K) +#endif + +/** + * SCSI command opcode identifiers. + * + * SCSI-3, so far for CD/DVD Logical Units, from Table 49 of the MMC-3 draft standard. + */ +typedef enum SCSICMD +{ + SCSI_BLANK = 0xa1, + SCSI_CLOSE_TRACK_SESSION = 0x5b, + SCSI_ERASE_10 = 0x2c, + SCSI_FORMAT_UNIT = 0x04, + SCSI_GET_CONFIGURATION = 0x46, + SCSI_GET_EVENT_STATUS_NOTIFICATION = 0x4a, + SCSI_GET_PERFORMANCE = 0xac, + /** Inquiry command. */ + SCSI_INQUIRY = 0x12, + SCSI_LOAD_UNLOAD_MEDIUM = 0xa6, + SCSI_MECHANISM_STATUS = 0xbd, + SCSI_MODE_SELECT_10 = 0x55, + SCSI_MODE_SENSE_10 = 0x5a, + SCSI_PAUSE_RESUME = 0x4b, + SCSI_PLAY_AUDIO_10 = 0x45, + SCSI_PLAY_AUDIO_12 = 0xa5, + SCSI_PLAY_AUDIO_MSF = 0x47, + SCSI_PREVENT_ALLOW_MEDIUM_REMOVAL = 0x1e, + /** Read(10) command. */ + SCSI_READ_10 = 0x28, + SCSI_READ_12 = 0xa8, + SCSI_READ_BUFFER = 0x3c, + SCSI_READ_BUFFER_CAPACITY = 0x5c, + /** Read Capacity(6) command. */ + SCSI_READ_CAPACITY = 0x25, + SCSI_READ_CD = 0xbe, + SCSI_READ_CD_MSF = 0xb9, + SCSI_READ_DISC_INFORMATION = 0x51, + SCSI_READ_DVD_STRUCTURE = 0xad, + SCSI_READ_FORMAT_CAPACITIES = 0x23, + SCSI_READ_SUBCHANNEL = 0x42, + SCSI_READ_TOC_PMA_ATIP = 0x43, + SCSI_READ_TRACK_INFORMATION = 0x52, + SCSI_REPAIR_TRACK = 0x58, + SCSI_REPORT_KEY = 0xa4, + SCSI_REQUEST_SENSE = 0x03, + SCSI_RESERVE_TRACK = 0x53, + SCSI_SCAN = 0xba, + SCSI_SEEK_10 = 0x2b, + SCSI_SEND_CUE_SHEET = 0x5d, + SCSI_SEND_DVD_STRUCTURE = 0xbf, + SCSI_SEND_EVENT = 0xa2, + SCSI_SEND_KEY = 0xa3, + SCSI_SEND_OPC_INFORMATION = 0x54, + SCSI_SET_CD_SPEED = 0xbb, + SCSI_SET_READ_AHEAD = 0xa7, + SCSI_SET_STREAMING = 0xb6, + SCSI_START_STOP_UNIT = 0x1b, + SCSI_LOAD_UNLOAD = 0x1b, + SCSI_STOP_PLAY_SCAN = 0x4e, + /** Synchronize Cache command. */ + SCSI_SYNCHRONIZE_CACHE = 0x35, + SCSI_TEST_UNIT_READY = 0x00, + SCSI_VERIFY_10 = 0x2f, + /** Write(10) command. */ + SCSI_WRITE_10 = 0x2a, + SCSI_WRITE_12 = 0xaa, + SCSI_WRITE_AND_VERIFY_10 = 0x2e, + SCSI_WRITE_BUFFER = 0x3b, + + /** Mode Sekect(6) command */ + SCSI_MODE_SELECT_6 = 0x15, + /** Mode Sense(6) command */ + SCSI_MODE_SENSE_6 = 0x1a, + /** Report LUNs command. */ + SCSI_REPORT_LUNS = 0xa0, + SCSI_REPORT_DENSITY = 0x44, + /** Rezero Unit command. Obsolete for ages now, but used by cdrecord. */ + SCSI_REZERO_UNIT = 0x01, + SCSI_REWIND = 0x01, + SCSI_SERVICE_ACTION_IN_16 = 0x9e, + SCSI_READ_16 = 0x88, + SCSI_WRITE_16 = 0x8a, + SCSI_READ_6 = 0x08, + SCSI_WRITE_6 = 0x0a, + SCSI_LOG_SENSE = 0x4d, + SCSI_UNMAP = 0x42, + SCSI_RESERVE_6 = 0x16, + SCSI_RELEASE_6 = 0x17, + SCSI_RESERVE_10 = 0x56, + SCSI_RELEASE_10 = 0x57, + SCSI_READ_BLOCK_LIMITS = 0x05, + SCSI_MAINTENANCE_IN = 0xa3 +} SCSICMD; + +/** + * Service action in opcode identifiers + */ +typedef enum SCSISVCACTIONIN +{ + SCSI_SVC_ACTION_IN_READ_CAPACITY_16 = 0x10 +} SCSISVCACTIONIN; + +/** + * Maintenance in opcode identifiers + */ +typedef enum SCSIMAINTENANCEIN +{ + SCSI_MAINTENANCE_IN_REPORT_SUPP_OPC = 0x0c +} SCSIMAINTENANCEIN; + +/* Mode page codes for mode sense/select commands. */ +#define SCSI_MODEPAGE_ERROR_RECOVERY 0x01 +#define SCSI_MODEPAGE_WRITE_PARAMETER 0x05 +#define SCSI_MODEPAGE_CD_STATUS 0x2a + + +/* Page control codes. */ +#define SCSI_PAGECONTROL_CURRENT 0x00 +#define SCSI_PAGECONTROL_CHANGEABLE 0x01 +#define SCSI_PAGECONTROL_DEFAULT 0x02 +#define SCSI_PAGECONTROL_SAVED 0x03 + + +/* Status codes */ +#define SCSI_STATUS_OK 0x00 +#define SCSI_STATUS_CHECK_CONDITION 0x02 +#define SCSI_STATUS_CONDITION_MET 0x04 +#define SCSI_STATUS_BUSY 0x08 +#define SCSI_STATUS_INTERMEDIATE 0x10 +#define SCSI_STATUS_DATA_UNDEROVER_RUN 0x12 +#define SCSI_STATUS_INTERMEDIATE_CONDITION_MET 0x14 +#define SCSI_STATUS_RESERVATION_CONFLICT 0x18 +#define SCSI_STATUS_COMMAND_TERMINATED 0x22 +#define SCSI_STATUS_QUEUE_FULL 0x28 +#define SCSI_STATUS_ACA_ACTIVE 0x30 +#define SCSI_STATUS_TASK_ABORTED 0x40 + +/* Sense data response codes - This is the first byte in the sense data */ +#define SCSI_SENSE_RESPONSE_CODE_CURR_FIXED 0x70 +#define SCSI_SENSE_RESPONSE_CODE_DEFERRED_FIXED 0x71 +#define SCSI_SENSE_RESPONSE_CODE_CURR_DESC 0x72 +#define SCSI_SENSE_RESPONSE_CODE_DEFERRED_DESC 0x73 + +/* Sense keys */ +#define SCSI_SENSE_NONE 0 +#define SCSI_SENSE_RECOVERED_ERROR 1 +#define SCSI_SENSE_NOT_READY 2 +#define SCSI_SENSE_MEDIUM_ERROR 3 +#define SCSI_SENSE_HARDWARE_ERROR 4 +#define SCSI_SENSE_ILLEGAL_REQUEST 5 +#define SCSI_SENSE_UNIT_ATTENTION 6 +#define SCSI_SENSE_DATA_PROTECT 7 +#define SCSI_SENSE_BLANK_CHECK 8 +#define SCSI_SENSE_VENDOR_SPECIFIC 9 +#define SCSI_SENSE_COPY_ABORTED 10 +#define SCSI_SENSE_ABORTED_COMMAND 11 +#define SCSI_SENSE_VOLUME_OVERFLOW 13 +#define SCSI_SENSE_MISCOMPARE 14 + +/* Additional sense bit flags (to be ORed with sense key). */ +#define SCSI_SENSE_FLAG_FILEMARK 0x80 +#define SCSI_SENSE_FLAG_EOM 0x40 +#define SCSI_SENSE_FLAG_ILI 0x20 + +/* Additional sense keys */ +#define SCSI_ASC_NONE 0x00 +#define SCSI_ASC_WRITE_ERROR 0x0c +#define SCSI_ASC_READ_ERROR 0x11 +#define SCSI_ASC_ILLEGAL_OPCODE 0x20 +#define SCSI_ASC_LOGICAL_BLOCK_OOR 0x21 +#define SCSI_ASC_INV_FIELD_IN_CMD_PACKET 0x24 +#define SCSI_ASC_WRITE_PROTECTED 0x27 +#define SCSI_ASC_MEDIUM_MAY_HAVE_CHANGED 0x28 +#define SCSI_ASC_POWER_ON_RESET_BUS_DEVICE_RESET_OCCURRED 0x29 +#define SCSI_ASC_CANNOT_READ_MEDIUM 0x30 +#define SCSI_ASC_MEDIUM_NOT_PRESENT 0x3a +#define SCSI_ASC_SAVING_PARAMETERS_NOT_SUPPORTED 0x39 +#define SCSI_ASC_INVALID_MESSAGE 0x49 +#define SCSI_ASC_MEDIA_LOAD_OR_EJECT_FAILED 0x53 +#define SCSI_ASC_LOGICAL_UNIT_DOES_NOT_RESPOND_TO_SELECTION 0x00 +#define SCSI_ASC_SYSTEM_RESOURCE_FAILURE 0x55 +#define SCSI_ASC_ILLEGAL_MODE_FOR_THIS_TRACK 0x64 + +/** Additional sense code qualifiers (ASCQ). */ +/* NB: The ASC/ASCQ combination determines the full meaning. */ +#define SCSI_ASCQ_SYSTEM_BUFFER_FULL 0x01 +#define SCSI_ASCQ_POWER_ON_RESET_BUS_DEVICE_RESET_OCCURRED 0x00 +#define SCSI_ASCQ_END_OF_DATA_DETECTED 0x05 +#define SCSI_ASCQ_FILEMARK_DETECTED 0x01 +#define SCSI_ASCQ_EOP_EOM_DETECTED 0x02 +#define SCSI_ASCQ_SETMARK_DETECTED 0x03 +#define SCSI_ASCQ_BOP_BOM_DETECTED 0x04 + +#define SCSI_ASCQ_UNKNOWN_FORMAT 0x01 +#define SCSI_ASCQ_INCOMPATIBLE_FORMAT 0x02 + +/** @name SCSI_INQUIRY + * @{ + */ + +/** Length of the SCSI INQUIRY vendor identifier (without termination). */ +#define SCSI_INQUIRY_VENDOR_ID_LENGTH 8 +/** Length of the SCSI INQUIRY product identifier (without termination). */ +#define SCSI_INQUIRY_PRODUCT_ID_LENGTH 16 +/** Length of the SCSI INQUIRY revision identifier (without termination). */ +#define SCSI_INQUIRY_REVISION_LENGTH 4 + +#pragma pack(1) +typedef struct SCSIINQUIRYCDB +{ + unsigned u8Cmd : 8; + unsigned fEVPD : 1; + unsigned u4Reserved : 4; + unsigned u3LUN : 3; + unsigned u8PageCode : 8; + unsigned u8Reserved : 8; + uint8_t cbAlloc; + uint8_t u8Control; +} SCSIINQUIRYCDB; +#pragma pack() +AssertCompileSize(SCSIINQUIRYCDB, 6); +typedef SCSIINQUIRYCDB *PSCSIINQUIRYCDB; +typedef const SCSIINQUIRYCDB *PCSCSIINQUIRYCDB; + +#pragma pack(1) +typedef struct SCSIINQUIRYDATA +{ + unsigned u5PeripheralDeviceType : 5; /**< 0x00 / 00 */ + unsigned u3PeripheralQualifier : 3; + unsigned u6DeviceTypeModifier : 7; /**< 0x01 */ + unsigned fRMB : 1; + unsigned u3AnsiVersion : 3; /**< 0x02 */ + unsigned u3EcmaVersion : 3; + unsigned u2IsoVersion : 2; + unsigned u4ResponseDataFormat : 4; /**< 0x03 */ + unsigned u2Reserved0 : 2; + unsigned fTrmlOP : 1; + unsigned fAEC : 1; + unsigned cbAdditional : 8; /**< 0x04 */ + unsigned u8Reserved1 : 8; /**< 0x05 */ + unsigned u8Reserved2 : 8; /**< 0x06 */ + unsigned fSftRe : 1; /**< 0x07 */ + unsigned fCmdQue : 1; + unsigned fReserved3 : 1; + unsigned fLinked : 1; + unsigned fSync : 1; + unsigned fWBus16 : 1; + unsigned fWBus32 : 1; + unsigned fRelAdr : 1; + int8_t achVendorId[SCSI_INQUIRY_VENDOR_ID_LENGTH]; /**< 0x08 */ + int8_t achProductId[SCSI_INQUIRY_PRODUCT_ID_LENGTH]; /**< 0x10 */ + int8_t achProductLevel[SCSI_INQUIRY_REVISION_LENGTH]; /**< 0x20 */ + uint8_t abVendorSpecific[20]; /**< 0x24/36 - Optional it seems. */ + uint8_t abReserved4[40]; + uint8_t abVendorSpecificParameters[1]; /**< 0x60/96 - Variable size. */ +} SCSIINQUIRYDATA; +#pragma pack() +AssertCompileSize(SCSIINQUIRYDATA, 97); +typedef SCSIINQUIRYDATA *PSCSIINQUIRYDATA; +typedef const SCSIINQUIRYDATA *PCSCSIINQUIRYDATA; + +#define SCSI_INQUIRY_DATA_PERIPHERAL_QUALIFIER_CONNECTED 0x00 +#define SCSI_INQUIRY_DATA_PERIPHERAL_QUALIFIER_NOT_CONNECTED_BUT_SUPPORTED 0x01 +#define SCSI_INQUIRY_DATA_PERIPHERAL_QUALIFIER_NOT_CONNECTED_NOT_SUPPORTED 0x03 + +#define SCSI_INQUIRY_DATA_PERIPHERAL_DEVICE_TYPE_DIRECT_ACCESS 0x00 +#define SCSI_INQUIRY_DATA_PERIPHERAL_DEVICE_TYPE_SEQUENTIAL_ACCESS 0x01 +#define SCSI_INQUIRY_DATA_PERIPHERAL_DEVICE_TYPE_CD_DVD 0x05 +#define SCSI_INQUIRY_DATA_PERIPHERAL_DEVICE_TYPE_UNKNOWN 0x1f + +/** @} */ + +#if defined(IN_RING3) && (defined(LOG_ENABLED) || defined(RT_STRICT)) +const char * SCSICmdText(uint8_t uCmd); +const char * SCSISenseText(uint8_t uSense); +const char * SCSISenseExtText(uint8_t uASC, uint8_t uASCQ); +int SCSILogModePage(char *pszBuf, size_t cchBuffer, uint8_t *pbModePage, + size_t cbModePage); +int SCSILogCueSheet(char *pszBuf, size_t cchBuffer, uint8_t *pbCueSheet, + size_t cbCueSheet); +#endif + +#endif /* !VBOX_INCLUDED_scsi_h */ |