diff options
Diffstat (limited to 'include/iprt/stream.h')
| -rw-r--r-- | include/iprt/stream.h | 344 |
1 files changed, 344 insertions, 0 deletions
diff --git a/include/iprt/stream.h b/include/iprt/stream.h new file mode 100644 index 00000000..fd026d29 --- /dev/null +++ b/include/iprt/stream.h @@ -0,0 +1,344 @@ +/** @file + * IPRT - I/O Stream. + */ + +/* + * Copyright (C) 2006-2019 Oracle Corporation + * + * This file is part of VirtualBox Open Source Edition (OSE), as + * available from http://www.virtualbox.org. This file is free software; + * you can redistribute it and/or modify it under the terms of the GNU + * General Public License (GPL) as published by the Free Software + * Foundation, in version 2 as it comes in the "COPYING" file of the + * VirtualBox OSE distribution. VirtualBox OSE is distributed in the + * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. + * + * The contents of this file may alternatively be used under the terms + * of the Common Development and Distribution License Version 1.0 + * (CDDL) only, as it comes in the "COPYING.CDDL" file of the + * VirtualBox OSE distribution, in which case the provisions of the + * CDDL are applicable instead of those of the GPL. + * + * You may elect to license modified versions of this file under the + * terms and conditions of either the GPL or the CDDL or both. + */ + +#ifndef IPRT_INCLUDED_stream_h +#define IPRT_INCLUDED_stream_h +#ifndef RT_WITHOUT_PRAGMA_ONCE +# pragma once +#endif + +#include <iprt/cdefs.h> +#include <iprt/types.h> +#include <iprt/stdarg.h> + +RT_C_DECLS_BEGIN + +/** @defgroup grp_rt_stream RTStrm - File Streams + * @ingroup grp_rt + * @{ + */ + +/** Pointer to a stream. */ +typedef struct RTSTREAM *PRTSTREAM; + +/** Pointer to the standard input stream. */ +extern RTDATADECL(PRTSTREAM) g_pStdIn; + +/** Pointer to the standard error stream. */ +extern RTDATADECL(PRTSTREAM) g_pStdErr; + +/** Pointer to the standard output stream. */ +extern RTDATADECL(PRTSTREAM) g_pStdOut; + + +/** + * Opens a file stream. + * + * @returns iprt status code. + * @param pszFilename Path to the file to open. + * @param pszMode The open mode. See fopen() standard. + * Format: <a|r|w>[+][b|t] + * @param ppStream Where to store the opened stream. + */ +RTR3DECL(int) RTStrmOpen(const char *pszFilename, const char *pszMode, PRTSTREAM *ppStream); + +/** + * Opens a file stream. + * + * @returns iprt status code. + * @param pszMode The open mode. See fopen() standard. + * Format: <a|r|w>[+][b|t] + * @param ppStream Where to store the opened stream. + * @param pszFilenameFmt Filename path format string. + * @param args Arguments to the format string. + */ +RTR3DECL(int) RTStrmOpenFV(const char *pszMode, PRTSTREAM *ppStream, const char *pszFilenameFmt, + va_list args) RT_IPRT_FORMAT_ATTR(3, 0); + +/** + * Opens a file stream. + * + * @returns iprt status code. + * @param pszMode The open mode. See fopen() standard. + * Format: <a|r|w>[+][b|t] + * @param ppStream Where to store the opened stream. + * @param pszFilenameFmt Filename path format string. + * @param ... Arguments to the format string. + */ +RTR3DECL(int) RTStrmOpenF(const char *pszMode, PRTSTREAM *ppStream, const char *pszFilenameFmt, ...) RT_IPRT_FORMAT_ATTR(3, 4); + +/** + * Closes the specified stream. + * + * @returns iprt status code. + * @param pStream The stream to close. + */ +RTR3DECL(int) RTStrmClose(PRTSTREAM pStream); + +/** + * Get the pending error of the stream. + * + * @returns iprt status code. of the stream. + * @param pStream The stream. + */ +RTR3DECL(int) RTStrmError(PRTSTREAM pStream); + +/** + * Clears stream error condition. + * + * All stream operations save RTStrmClose and this will fail + * while an error is asserted on the stream + * + * @returns iprt status code. + * @param pStream The stream. + */ +RTR3DECL(int) RTStrmClearError(PRTSTREAM pStream); + +/** + * Changes the stream mode. + * + * @returns iprt status code. + * @param pStream The stream. + * @param fBinary The desired binary (@c true) / text mode (@c false). + * Pass -1 to leave it unchanged. + * @param fCurrentCodeSet Whether converting the stream from UTF-8 to the + * current code set is desired (@c true) or not (@c + * false). Pass -1 to leave this property unchanged. + */ +RTR3DECL(int) RTStrmSetMode(PRTSTREAM pStream, int fBinary, int fCurrentCodeSet); + +/** + * Returns the current echo mode. + * This works only for standard input streams. + * + * @returns iprt status code. + * @param pStream The stream. + * @param pfEchoChars Where to store the flag whether typed characters are echoed. + */ +RTR3DECL(int) RTStrmInputGetEchoChars(PRTSTREAM pStream, bool *pfEchoChars); + +/** + * Changes the behavior for echoing inpit characters on the command line. + * This works only for standard input streams. + * + * @returns iprt status code. + * @param pStream The stream. + * @param fEchoChars Flag whether echoing typed characters is wanted. + */ +RTR3DECL(int) RTStrmInputSetEchoChars(PRTSTREAM pStream, bool fEchoChars); + +/** + * Checks if this is a terminal (TTY) or not. + * + * @returns true if it is, false if it isn't or the stream isn't valid. + * @param pStream The stream. + */ +RTR3DECL(bool) RTStrmIsTerminal(PRTSTREAM pStream); + +/** + * Gets the width of the terminal the stream is associated with. + * + * @returns IPRT status code. + * @retval VERR_INVALID_FUNCTION if not connected to a terminal. + * @param pStream The stream. + * @param pcchWidth Where to return the width. This will never be zero + * and always be set, even on error. + */ +RTR3DECL(int) RTStrmQueryTerminalWidth(PRTSTREAM pStream, uint32_t *pcchWidth); + +/** + * Rewinds the stream. + * + * Stream errors will be reset on success. + * + * @returns IPRT status code. + * + * @param pStream The stream. + * + * @remarks Not all streams are rewindable and that behavior is currently + * undefined for those. + */ +RTR3DECL(int) RTStrmRewind(PRTSTREAM pStream); + +/** + * Reads from a file stream. + * + * @returns iprt status code. + * @param pStream The stream. + * @param pvBuf Where to put the read bits. + * Must be cbRead bytes or more. + * @param cbRead Number of bytes to read. + * @param pcbRead Where to store the number of bytes actually read. + * If NULL cbRead bytes are read or an error is returned. + */ +RTR3DECL(int) RTStrmReadEx(PRTSTREAM pStream, void *pvBuf, size_t cbRead, size_t *pcbRead); + +/** + * Writes to a file stream. + * + * @returns iprt status code. + * @param pStream The stream. + * @param pvBuf Where to get the bits to write from. + * @param cbWrite Number of bytes to write. + * @param pcbWritten Where to store the number of bytes actually written. + * If NULL cbWrite bytes are written or an error is returned. + */ +RTR3DECL(int) RTStrmWriteEx(PRTSTREAM pStream, const void *pvBuf, size_t cbWrite, size_t *pcbWritten); + +/** + * Reads from a file stream. + * + * @returns iprt status code. + * @param pStream The stream. + * @param pvBuf Where to put the read bits. + * Must be cbRead bytes or more. + * @param cbRead Number of bytes to read. + */ +DECLINLINE(int) RTStrmRead(PRTSTREAM pStream, void *pvBuf, size_t cbRead) +{ + return RTStrmReadEx(pStream, pvBuf, cbRead, NULL); +} + +/** + * Writes to a file stream. + * + * @returns iprt status code. + * @param pStream The stream. + * @param pvBuf Where to get the bits to write from. + * @param cbWrite Number of bytes to write. + */ +DECLINLINE(int) RTStrmWrite(PRTSTREAM pStream, const void *pvBuf, size_t cbWrite) +{ + return RTStrmWriteEx(pStream, pvBuf, cbWrite, NULL); +} + +/** + * Reads a character from a file stream. + * + * @returns The char as an unsigned char cast to int. + * @returns -1 on failure. + * @param pStream The stream. + */ +RTR3DECL(int) RTStrmGetCh(PRTSTREAM pStream); + +/** + * Writes a character to a file stream. + * + * @returns iprt status code. + * @param pStream The stream. + * @param ch The char to write. + */ +RTR3DECL(int) RTStrmPutCh(PRTSTREAM pStream, int ch); + +/** + * Writes a string to a file stream. + * + * @returns iprt status code. + * @param pStream The stream. + * @param pszString The string to write. + * No newlines or anything are appended or prepended. + * The terminating '\\0' is not written, of course. + */ +RTR3DECL(int) RTStrmPutStr(PRTSTREAM pStream, const char *pszString); + +/** + * Reads a line from a file stream. + * + * A line ends with a '\\n', '\\r\\n', '\\0' or the end of the file. + * + * @returns iprt status code. + * @retval VINF_BUFFER_OVERFLOW if the buffer wasn't big enough to read an + * entire line. + * @retval VERR_BUFFER_OVERFLOW if a lone '\\r' was encountered at the end of + * the buffer and we ended up dropping the following character. + * + * @param pStream The stream. + * @param pszString Where to store the line. + * The line will *NOT* contain any '\\n'. + * @param cbString The size of the string buffer. + */ +RTR3DECL(int) RTStrmGetLine(PRTSTREAM pStream, char *pszString, size_t cbString); + +/** + * Flushes a stream. + * + * @returns iprt status code. + * @param pStream The stream to flush. + */ +RTR3DECL(int) RTStrmFlush(PRTSTREAM pStream); + +/** + * Prints a formatted string to the specified stream. + * + * @returns Number of bytes printed. + * @param pStream The stream to print to. + * @param pszFormat Runtime format string. + * @param ... Arguments specified by pszFormat. + */ +RTR3DECL(int) RTStrmPrintf(PRTSTREAM pStream, const char *pszFormat, ...) RT_IPRT_FORMAT_ATTR(2, 3); + +/** + * Prints a formatted string to the specified stream. + * + * @returns Number of bytes printed. + * @param pStream The stream to print to. + * @param pszFormat Runtime format string. + * @param args Arguments specified by pszFormat. + */ +RTR3DECL(int) RTStrmPrintfV(PRTSTREAM pStream, const char *pszFormat, va_list args) RT_IPRT_FORMAT_ATTR(2, 0); + +/** + * Dumper vprintf-like function outputting to a stream. + * + * @param pvUser The stream to print to. NULL means standard output. + * @param pszFormat Runtime format string. + * @param va Arguments specified by pszFormat. + */ +RTR3DECL(void) RTStrmDumpPrintfV(void *pvUser, const char *pszFormat, va_list va) RT_IPRT_FORMAT_ATTR(2, 0); + +/** + * Prints a formatted string to the standard output stream (g_pStdOut). + * + * @returns Number of bytes printed. + * @param pszFormat Runtime format string. + * @param ... Arguments specified by pszFormat. + */ +RTR3DECL(int) RTPrintf(const char *pszFormat, ...) RT_IPRT_FORMAT_ATTR(1, 2); + +/** + * Prints a formatted string to the standard output stream (g_pStdOut). + * + * @returns Number of bytes printed. + * @param pszFormat Runtime format string. + * @param args Arguments specified by pszFormat. + */ +RTR3DECL(int) RTPrintfV(const char *pszFormat, va_list args) RT_IPRT_FORMAT_ATTR(1, 0); + +/** @} */ + +RT_C_DECLS_END + +#endif /* !IPRT_INCLUDED_stream_h */ + |