diff options
Diffstat (limited to 'src/VBox/ValidationKit/utils/serial/SerialTest.cpp')
| -rw-r--r-- | src/VBox/ValidationKit/utils/serial/SerialTest.cpp | 969 |
1 files changed, 969 insertions, 0 deletions
diff --git a/src/VBox/ValidationKit/utils/serial/SerialTest.cpp b/src/VBox/ValidationKit/utils/serial/SerialTest.cpp new file mode 100644 index 00000000..979f5ed7 --- /dev/null +++ b/src/VBox/ValidationKit/utils/serial/SerialTest.cpp @@ -0,0 +1,969 @@ +/* $Id: SerialTest.cpp $ */ +/** @file + * SerialTest - Serial port testing utility. + */ + +/* + * Copyright (C) 2017-2019 Oracle Corporation + * + * This file is part of VirtualBox Open Source Edition (OSE), as + * available from http://www.virtualbox.org. This file is free software; + * you can redistribute it and/or modify it under the terms of the GNU + * General Public License (GPL) as published by the Free Software + * Foundation, in version 2 as it comes in the "COPYING" file of the + * VirtualBox OSE distribution. VirtualBox OSE is distributed in the + * hope that it will be useful, but WITHOUT ANY WARRANTY of any kind. + * + * The contents of this file may alternatively be used under the terms + * of the Common Development and Distribution License Version 1.0 + * (CDDL) only, as it comes in the "COPYING.CDDL" file of the + * VirtualBox OSE distribution, in which case the provisions of the + * CDDL are applicable instead of those of the GPL. + * + * You may elect to license modified versions of this file under the + * terms and conditions of either the GPL or the CDDL or both. + */ + + +/********************************************************************************************************************************* +* Header Files * +*********************************************************************************************************************************/ +#include <iprt/errcore.h> +#include <iprt/getopt.h> +#include <iprt/mem.h> +#include <iprt/path.h> +#include <iprt/param.h> +#include <iprt/process.h> +#include <iprt/rand.h> +#include <iprt/serialport.h> +#include <iprt/stream.h> +#include <iprt/string.h> +#include <iprt/test.h> + + +/********************************************************************************************************************************* +* Defined Constants And Macros * +*********************************************************************************************************************************/ + +/** Number of times to toggle the status lines during the test. */ +#define SERIALTEST_STS_LINE_TOGGLE_COUNT 100 + + +/********************************************************************************************************************************* +* Structures and Typedefs * +*********************************************************************************************************************************/ + + +/** + * Serial test mode. + */ +typedef enum SERIALTESTMODE +{ + /** Invalid mode. */ + SERIALTESTMODE_INVALID = 0, + /** Serial port is looped back to itself */ + SERIALTESTMODE_LOOPBACK, + /** A secondary serial port is used with a null modem cable in between. */ + SERIALTESTMODE_SECONDARY, + /** The serial port is connected externally over which we have no control. */ + SERIALTESTMODE_EXTERNAL, + /** Usual 32bit hack. */ + SERIALTESTMODE_32BIT_HACK = 0x7fffffff +} SERIALTESTMODE; +/** Pointer to a serial test mode. */ +typedef SERIALTESTMODE *PSERIALTESTMDOE; + +/** Pointer to the serial test data instance. */ +typedef struct SERIALTEST *PSERIALTEST; + +/** + * Test callback function. + * + * @returns IPRT status code. + * @param pSerialTest The serial test instance data. + */ +typedef DECLCALLBACK(int) FNSERIALTESTRUN(PSERIALTEST pSerialTest); +/** Pointer to the serial test callback. */ +typedef FNSERIALTESTRUN *PFNSERIALTESTRUN; + + +/** + * The serial test instance data. + */ +typedef struct SERIALTEST +{ + /** The assigned test handle. */ + RTTEST hTest; + /** The assigned serial port. */ + RTSERIALPORT hSerialPort; + /** The currently active config. */ + PCRTSERIALPORTCFG pSerialCfg; +} SERIALTEST; + + +/** + * Test descriptor. + */ +typedef struct SERIALTESTDESC +{ + /** Test ID. */ + const char *pszId; + /** Test description. */ + const char *pszDesc; + /** Test run callback. */ + PFNSERIALTESTRUN pfnRun; +} SERIALTESTDESC; +/** Pointer to a test descriptor. */ +typedef SERIALTESTDESC *PSERIALTESTDESC; +/** Pointer to a constant test descriptor. */ +typedef const SERIALTESTDESC *PCSERIALTESTDESC; + + +/** + * TX/RX buffer containing a simple counter. + */ +typedef struct SERIALTESTTXRXBUFCNT +{ + /** The current counter value. */ + uint32_t iCnt; + /** Number of bytes left to receive/transmit. */ + size_t cbTxRxLeft; + /** The offset into the buffer to receive to/send from. */ + size_t offBuf; + /** Maximum size to send/receive before processing is needed again. */ + size_t cbTxRxMax; + /** The data buffer. */ + uint8_t abBuf[_1K]; +} SERIALTESTTXRXBUFCNT; +/** Pointer to a TX/RX buffer. */ +typedef SERIALTESTTXRXBUFCNT *PSERIALTESTTXRXBUFCNT; + + +/********************************************************************************************************************************* +* Global Variables * +*********************************************************************************************************************************/ + + +/** Command line parameters */ +static const RTGETOPTDEF g_aCmdOptions[] = +{ + {"--device", 'd', RTGETOPT_REQ_STRING }, + {"--baudrate", 'b', RTGETOPT_REQ_UINT32 }, + {"--parity", 'p', RTGETOPT_REQ_STRING }, + {"--databits", 'c', RTGETOPT_REQ_UINT32 }, + {"--stopbits", 's', RTGETOPT_REQ_STRING }, + {"--mode", 'm', RTGETOPT_REQ_STRING }, + {"--secondarydevice", 'l', RTGETOPT_REQ_STRING }, + {"--tests", 't', RTGETOPT_REQ_STRING }, + {"--txbytes", 'x', RTGETOPT_REQ_UINT32 }, + {"--verbose", 'v', RTGETOPT_REQ_NOTHING}, + {"--help", 'h', RTGETOPT_REQ_NOTHING} +}; + + +static DECLCALLBACK(int) serialTestRunReadWrite(PSERIALTEST pSerialTest); +static DECLCALLBACK(int) serialTestRunWrite(PSERIALTEST pSerialTest); +static DECLCALLBACK(int) serialTestRunStsLines(PSERIALTEST pSerialTest); + +/** Implemented tests. */ +static const SERIALTESTDESC g_aSerialTests[] = +{ + {"readwrite", "Simple Read/Write test on the same serial port", serialTestRunReadWrite }, + {"write", "Simple write test (verification done somewhere else)", serialTestRunWrite }, + {"stslines", "Testing the status line setting and receiving", serialTestRunStsLines } +}; + +/** Verbosity value. */ +static unsigned g_cVerbosity = 0; +/** The test handle. */ +static RTTEST g_hTest = NIL_RTTEST; +/** The serial test mode. */ +static SERIALTESTMODE g_enmMode = SERIALTESTMODE_LOOPBACK; +/** Random number generator. */ +static RTRAND g_hRand = NIL_RTRAND; +/** The serial port handle. */ +static RTSERIALPORT g_hSerialPort = NIL_RTSERIALPORT; +/** The loopback serial port handle if configured. */ +static RTSERIALPORT g_hSerialPortSecondary = NIL_RTSERIALPORT; +/** Number of bytes to transmit for read/write tests. */ +static size_t g_cbTx = _1M; +/** The config used. */ +static RTSERIALPORTCFG g_SerialPortCfg = +{ + /* uBaudRate */ + 115200, + /* enmParity */ + RTSERIALPORTPARITY_NONE, + /* enmDataBitCount */ + RTSERIALPORTDATABITS_8BITS, + /* enmStopBitCount */ + RTSERIALPORTSTOPBITS_ONE +}; + + +/** + * Initializes a TX buffer. + * + * @returns nothing. + * @param pSerBuf The serial buffer to initialize. + * @param cbTx Maximum number of bytes to transmit. + */ +static void serialTestTxBufInit(PSERIALTESTTXRXBUFCNT pSerBuf, size_t cbTx) +{ + pSerBuf->iCnt = 0; + pSerBuf->offBuf = 0; + pSerBuf->cbTxRxMax = 0; + pSerBuf->cbTxRxLeft = cbTx; + RT_ZERO(pSerBuf->abBuf); +} + + +/** + * Initializes a RX buffer. + * + * @returns nothing. + * @param pSerBuf The serial buffer to initialize. + * @param cbRx Maximum number of bytes to receive. + */ +static void serialTestRxBufInit(PSERIALTESTTXRXBUFCNT pSerBuf, size_t cbRx) +{ + pSerBuf->iCnt = 0; + pSerBuf->offBuf = 0; + pSerBuf->cbTxRxMax = sizeof(pSerBuf->abBuf); + pSerBuf->cbTxRxLeft = cbRx; + RT_ZERO(pSerBuf->abBuf); +} + + +/** + * Prepares the given TX buffer with data for sending it out. + * + * @returns nothing. + * @param pSerBuf The TX buffer pointer. + */ +static void serialTestTxBufPrepare(PSERIALTESTTXRXBUFCNT pSerBuf) +{ + /* Move the data to the front to make room at the end to fill. */ + if (pSerBuf->offBuf) + { + memmove(&pSerBuf->abBuf[0], &pSerBuf->abBuf[pSerBuf->offBuf], sizeof(pSerBuf->abBuf) - pSerBuf->offBuf); + pSerBuf->offBuf = 0; + } + + /* Fill up with data. */ + uint32_t offData = 0; + while (pSerBuf->cbTxRxMax + sizeof(uint32_t) <= sizeof(pSerBuf->abBuf)) + { + pSerBuf->iCnt++; + *(uint32_t *)&pSerBuf->abBuf[pSerBuf->offBuf + offData] = pSerBuf->iCnt; + pSerBuf->cbTxRxMax += sizeof(uint32_t); + offData += sizeof(uint32_t); + } +} + + +/** + * Sends a new batch of data from the TX buffer preapring new data if required. + * + * @returns IPRT status code. + * @param hSerialPort The serial port handle to send the data to. + * @param pSerBuf The TX buffer pointer. + */ +static int serialTestTxBufSend(RTSERIALPORT hSerialPort, PSERIALTESTTXRXBUFCNT pSerBuf) +{ + int rc = VINF_SUCCESS; + + if (pSerBuf->cbTxRxLeft) + { + if (!pSerBuf->cbTxRxMax) + serialTestTxBufPrepare(pSerBuf); + + size_t cbToWrite = RT_MIN(pSerBuf->cbTxRxMax, pSerBuf->cbTxRxLeft); + size_t cbWritten = 0; + rc = RTSerialPortWriteNB(hSerialPort, &pSerBuf->abBuf[pSerBuf->offBuf], cbToWrite, &cbWritten); + if (RT_SUCCESS(rc)) + { + pSerBuf->cbTxRxMax -= cbWritten; + pSerBuf->offBuf += cbWritten; + pSerBuf->cbTxRxLeft -= cbWritten; + } + } + + return rc; +} + + +/** + * Receives dat from the given serial port into the supplied RX buffer and does some validity checking. + * + * @returns IPRT status code. + * @param hSerialPort The serial port handle to receive data from. + * @param pSerBuf The RX buffer pointer. + */ +static int serialTestRxBufRecv(RTSERIALPORT hSerialPort, PSERIALTESTTXRXBUFCNT pSerBuf) +{ + int rc = VINF_SUCCESS; + + if (pSerBuf->cbTxRxLeft) + { + size_t cbToRead = RT_MIN(pSerBuf->cbTxRxMax, pSerBuf->cbTxRxLeft); + size_t cbRead = 0; + rc = RTSerialPortReadNB(hSerialPort, &pSerBuf->abBuf[pSerBuf->offBuf], cbToRead, &cbRead); + if (RT_SUCCESS(rc)) + { + pSerBuf->offBuf += cbRead; + pSerBuf->cbTxRxMax -= cbRead; + pSerBuf->cbTxRxLeft -= cbRead; + } + } + + return rc; +} + + +/** + * Verifies the data in the given RX buffer for correct transmission. + * + * @returns Flag whether verification failed. + * @param hTest The test handle to report errors to. + * @param pSerBuf The RX buffer pointer. + * @param iCntTx The current TX counter value the RX buffer should never get ahead of. + */ +static bool serialTestRxBufVerify(RTTEST hTest, PSERIALTESTTXRXBUFCNT pSerBuf, uint32_t iCntTx) +{ + uint32_t offRx = 0; + bool fFailed = false; + + while (offRx + sizeof(uint32_t) < pSerBuf->offBuf) + { + uint32_t u32Val = *(uint32_t *)&pSerBuf->abBuf[offRx]; + offRx += sizeof(uint32_t); + + if (RT_UNLIKELY(u32Val != ++pSerBuf->iCnt)) + { + fFailed = true; + if (g_cVerbosity > 0) + RTTestFailed(hTest, "Data corruption/loss detected, expected counter value %u got %u\n", + pSerBuf->iCnt, u32Val); + } + } + + if (RT_UNLIKELY(pSerBuf->iCnt > iCntTx)) + { + fFailed = true; + RTTestFailed(hTest, "Overtook the send buffer, expected maximum counter value %u got %u\n", + iCntTx, pSerBuf->iCnt); + } + + /* Remove processed data from the buffer and move the rest to the front. */ + if (offRx) + { + memmove(&pSerBuf->abBuf[0], &pSerBuf->abBuf[offRx], sizeof(pSerBuf->abBuf) - offRx); + pSerBuf->offBuf -= offRx; + pSerBuf->cbTxRxMax += offRx; + } + + return fFailed; +} + + +DECLINLINE(bool) serialTestRndTrue(void) +{ + return RTRandAdvU32Ex(g_hRand, 0, 1) == 1; +} + +/** + * Runs a simple read/write test. + * + * @returns IPRT status code. + * @param pSerialTest The serial test configuration. + */ +static DECLCALLBACK(int) serialTestRunReadWrite(PSERIALTEST pSerialTest) +{ + uint64_t tsStart = RTTimeNanoTS(); + bool fFailed = false; + SERIALTESTTXRXBUFCNT SerBufTx; + SERIALTESTTXRXBUFCNT SerBufRx; + + serialTestTxBufInit(&SerBufTx, g_cbTx); + serialTestRxBufInit(&SerBufRx, g_cbTx); + + int rc = serialTestTxBufSend(pSerialTest->hSerialPort, &SerBufTx); + while ( RT_SUCCESS(rc) + && ( SerBufTx.cbTxRxLeft + || SerBufRx.cbTxRxLeft)) + { + uint32_t fEvts = 0; + uint32_t fEvtsQuery = 0; + if (SerBufTx.cbTxRxLeft) + fEvtsQuery |= RTSERIALPORT_EVT_F_DATA_TX; + if (SerBufRx.cbTxRxLeft) + fEvtsQuery |= RTSERIALPORT_EVT_F_DATA_RX; + + rc = RTSerialPortEvtPoll(pSerialTest->hSerialPort, fEvtsQuery, &fEvts, RT_INDEFINITE_WAIT); + if (RT_FAILURE(rc)) + break; + + if (fEvts & RTSERIALPORT_EVT_F_DATA_RX) + { + rc = serialTestRxBufRecv(pSerialTest->hSerialPort, &SerBufRx); + if (RT_FAILURE(rc)) + break; + + bool fRes = serialTestRxBufVerify(pSerialTest->hTest, &SerBufRx, SerBufTx.iCnt); + if (fRes && !fFailed) + { + fFailed = true; + RTTestFailed(pSerialTest->hTest, "Data corruption/loss detected\n"); + } + } + if ( RT_SUCCESS(rc) + && (fEvts & RTSERIALPORT_EVT_F_DATA_TX)) + rc = serialTestTxBufSend(pSerialTest->hSerialPort, &SerBufTx); + } + + uint64_t tsRuntime = RTTimeNanoTS() - tsStart; + size_t cNsPerByte = tsRuntime / g_cbTx; + uint64_t cbBytesPerSec = RT_NS_1SEC / cNsPerByte; + RTTestValue(pSerialTest->hTest, "Throughput", cbBytesPerSec, RTTESTUNIT_BYTES_PER_SEC); + + return rc; +} + + +/** + * Runs a simple write test without doing any verification. + * + * @returns IPRT status code. + * @param pSerialTest The serial test configuration. + */ +static DECLCALLBACK(int) serialTestRunWrite(PSERIALTEST pSerialTest) +{ + uint64_t tsStart = RTTimeNanoTS(); + SERIALTESTTXRXBUFCNT SerBufTx; + + serialTestTxBufInit(&SerBufTx, g_cbTx); + + int rc = serialTestTxBufSend(pSerialTest->hSerialPort, &SerBufTx); + while ( RT_SUCCESS(rc) + && SerBufTx.cbTxRxLeft) + { + uint32_t fEvts = 0; + + rc = RTSerialPortEvtPoll(pSerialTest->hSerialPort, RTSERIALPORT_EVT_F_DATA_TX, &fEvts, RT_INDEFINITE_WAIT); + if (RT_FAILURE(rc)) + break; + + if (fEvts & RTSERIALPORT_EVT_F_DATA_TX) + rc = serialTestTxBufSend(pSerialTest->hSerialPort, &SerBufTx); + } + + uint64_t tsRuntime = RTTimeNanoTS() - tsStart; + size_t cNsPerByte = tsRuntime / g_cbTx; + uint64_t cbBytesPerSec = RT_NS_1SEC / cNsPerByte; + RTTestValue(pSerialTest->hTest, "Throughput", cbBytesPerSec, RTTESTUNIT_BYTES_PER_SEC); + + return rc; +} + + +/** + * Tests setting status lines and getting notified about status line changes. + * + * @returns IPRT status code. + * @param pSerialTest The serial test configuration. + */ +static DECLCALLBACK(int) serialTestRunStsLines(PSERIALTEST pSerialTest) +{ + int rc = VINF_SUCCESS; + + if (g_enmMode == SERIALTESTMODE_LOOPBACK) + { + uint32_t fStsLinesQueriedOld = 0; + + rc = RTSerialPortChgStatusLines(pSerialTest->hSerialPort, + RTSERIALPORT_CHG_STS_LINES_F_RTS | RTSERIALPORT_CHG_STS_LINES_F_DTR, + 0); + if (RT_SUCCESS(rc)) + { + rc = RTSerialPortQueryStatusLines(pSerialTest->hSerialPort, &fStsLinesQueriedOld); + if (RT_SUCCESS(rc)) + { + /* Everything should be clear at this stage. */ + if (!fStsLinesQueriedOld) + { + uint32_t fStsLinesSetOld = 0; + + for (uint32_t i = 0; i < SERIALTEST_STS_LINE_TOGGLE_COUNT; i++) + { + uint32_t fStsLinesSet = 0; + uint32_t fStsLinesClear = 0; + + /* Change RTS? */ + if (serialTestRndTrue()) + { + /* Clear, if set previously otherwise set it. */ + if (fStsLinesSetOld & RTSERIALPORT_CHG_STS_LINES_F_RTS) + fStsLinesClear |= RTSERIALPORT_CHG_STS_LINES_F_RTS; + else + fStsLinesSet |= RTSERIALPORT_CHG_STS_LINES_F_RTS; + } + + /* Change DTR? */ + if (serialTestRndTrue()) + { + /* Clear, if set previously otherwise set it. */ + if (fStsLinesSetOld & RTSERIALPORT_CHG_STS_LINES_F_DTR) + fStsLinesClear |= RTSERIALPORT_CHG_STS_LINES_F_DTR; + else + fStsLinesSet |= RTSERIALPORT_CHG_STS_LINES_F_DTR; + } + + rc = RTSerialPortChgStatusLines(pSerialTest->hSerialPort, fStsLinesClear, fStsLinesSet); + if (RT_FAILURE(rc)) + { + RTTestFailed(g_hTest, "Changing status lines failed with %Rrc on iteration %u (fSet=%#x fClear=%#x)\n", + rc, i, fStsLinesSet, fStsLinesClear); + break; + } + + /* Wait for status line monitor event. */ + uint32_t fEvtsRecv = 0; + rc = RTSerialPortEvtPoll(pSerialTest->hSerialPort, RTSERIALPORT_EVT_F_STATUS_LINE_CHANGED, + &fEvtsRecv, RT_MS_1SEC); + if ( RT_FAILURE(rc) + && (rc != VERR_TIMEOUT && !fStsLinesSet && !fStsLinesClear)) + { + RTTestFailed(g_hTest, "Waiting for status line change failed with %Rrc on iteration %u\n", + rc, i); + break; + } + + uint32_t fStsLinesQueried = 0; + rc = RTSerialPortQueryStatusLines(pSerialTest->hSerialPort, &fStsLinesQueried); + if (RT_FAILURE(rc)) + { + RTTestFailed(g_hTest, "Querying status lines failed with %Rrc on iteration %u\n", + rc, i); + break; + } + + /* Compare expected and real result. */ + if ( (fStsLinesQueried & RTSERIALPORT_STS_LINE_DSR) + != (fStsLinesQueriedOld & RTSERIALPORT_STS_LINE_DSR)) + { + if ( (fStsLinesQueried & RTSERIALPORT_STS_LINE_DSR) + && !(fStsLinesSet & RTSERIALPORT_CHG_STS_LINES_F_DTR)) + RTTestFailed(g_hTest, "DSR line got set when it shouldn't be on iteration %u\n", i); + else if ( !(fStsLinesQueried & RTSERIALPORT_STS_LINE_DSR) + && !(fStsLinesClear & RTSERIALPORT_CHG_STS_LINES_F_DTR)) + RTTestFailed(g_hTest, "DSR line got cleared when it shouldn't be on iteration %u\n", i); + } + else if ( (fStsLinesSet & RTSERIALPORT_CHG_STS_LINES_F_DTR) + || (fStsLinesClear & RTSERIALPORT_CHG_STS_LINES_F_DTR)) + RTTestFailed(g_hTest, "DSR line didn't change when it should have on iteration %u\n", i); + + if ( (fStsLinesQueried & RTSERIALPORT_STS_LINE_DCD) + != (fStsLinesQueriedOld & RTSERIALPORT_STS_LINE_DCD)) + { + if ( (fStsLinesQueried & RTSERIALPORT_STS_LINE_DCD) + && !(fStsLinesSet & RTSERIALPORT_CHG_STS_LINES_F_DTR)) + RTTestFailed(g_hTest, "DCD line got set when it shouldn't be on iteration %u\n", i); + else if ( !(fStsLinesQueried & RTSERIALPORT_STS_LINE_DCD) + && !(fStsLinesClear & RTSERIALPORT_CHG_STS_LINES_F_DTR)) + RTTestFailed(g_hTest, "DCD line got cleared when it shouldn't be on iteration %u\n", i); + } + else if ( (fStsLinesSet & RTSERIALPORT_CHG_STS_LINES_F_DTR) + || (fStsLinesClear & RTSERIALPORT_CHG_STS_LINES_F_DTR)) + RTTestFailed(g_hTest, "DCD line didn't change when it should have on iteration %u\n", i); + + if ( (fStsLinesQueried & RTSERIALPORT_STS_LINE_CTS) + != (fStsLinesQueriedOld & RTSERIALPORT_STS_LINE_CTS)) + { + if ( (fStsLinesQueried & RTSERIALPORT_STS_LINE_CTS) + && !(fStsLinesSet & RTSERIALPORT_CHG_STS_LINES_F_RTS)) + RTTestFailed(g_hTest, "CTS line got set when it shouldn't be on iteration %u\n", i); + else if ( !(fStsLinesQueried & RTSERIALPORT_STS_LINE_CTS) + && !(fStsLinesClear & RTSERIALPORT_CHG_STS_LINES_F_RTS)) + RTTestFailed(g_hTest, "CTS line got cleared when it shouldn't be on iteration %u\n", i); + } + else if ( (fStsLinesSet & RTSERIALPORT_CHG_STS_LINES_F_RTS) + || (fStsLinesClear & RTSERIALPORT_CHG_STS_LINES_F_RTS)) + RTTestFailed(g_hTest, "CTS line didn't change when it should have on iteration %u\n", i); + + if (RTTestErrorCount(g_hTest) > 0) + break; + + fStsLinesSetOld |= fStsLinesSet; + fStsLinesSetOld &= ~fStsLinesClear; + fStsLinesQueriedOld = fStsLinesQueried; + } + } + else + RTTestFailed(g_hTest, "Status lines active which should be clear (%#x, but expected %#x)\n", + fStsLinesQueriedOld, 0); + } + else + RTTestFailed(g_hTest, "Querying status lines failed with %Rrc\n", rc); + } + else + RTTestFailed(g_hTest, "Clearing status lines failed with %Rrc\n", rc); + } + else + rc = VERR_NOT_IMPLEMENTED; + + return rc; +} + + +/** + * Returns an array of test descriptors get from the given string. + * + * @returns Pointer to the array of test descriptors. + * @param pszTests The string containing the tests separated with ':'. + */ +static PSERIALTESTDESC serialTestSelectFromCmdLine(const char *pszTests) +{ + size_t cTests = 1; + + const char *pszNext = strchr(pszTests, ':'); + while (pszNext) + { + pszNext++; + cTests++; + pszNext = strchr(pszNext, ':'); + } + + PSERIALTESTDESC paTests = (PSERIALTESTDESC)RTMemAllocZ((cTests + 1) * sizeof(SERIALTESTDESC)); + if (RT_LIKELY(paTests)) + { + uint32_t iTest = 0; + + pszNext = strchr(pszTests, ':'); + while (pszNext) + { + bool fFound = false; + + pszNext++; /* Skip : character. */ + + for (unsigned i = 0; i < RT_ELEMENTS(g_aSerialTests); i++) + { + if (!RTStrNICmp(pszTests, g_aSerialTests[i].pszId, pszNext - pszTests - 1)) + { + memcpy(&paTests[iTest], &g_aSerialTests[i], sizeof(SERIALTESTDESC)); + fFound = true; + break; + } + } + + if (RT_UNLIKELY(!fFound)) + { + RTPrintf("Testcase \"%.*s\" not known\n", pszNext - pszTests - 1, pszTests); + RTMemFree(paTests); + return NULL; + } + + pszTests = pszNext; + pszNext = strchr(pszTests, ':'); + } + + /* Fill last descriptor. */ + bool fFound = false; + for (unsigned i = 0; i < RT_ELEMENTS(g_aSerialTests); i++) + { + if (!RTStrICmp(pszTests, g_aSerialTests[i].pszId)) + { + memcpy(&paTests[iTest], &g_aSerialTests[i], sizeof(SERIALTESTDESC)); + fFound = true; + break; + } + } + + if (RT_UNLIKELY(!fFound)) + { + RTPrintf("Testcase \"%s\" not known\n", pszTests); + RTMemFree(paTests); + paTests = NULL; + } + } + else + RTPrintf("Failed to allocate test descriptors for %u selected tests\n", cTests); + + return paTests; +} + + +/** + * Shows tool usage text. + */ +static void serialTestUsage(PRTSTREAM pStrm) +{ + char szExec[RTPATH_MAX]; + RTStrmPrintf(pStrm, "usage: %s [options]\n", + RTPathFilename(RTProcGetExecutablePath(szExec, sizeof(szExec)))); + RTStrmPrintf(pStrm, "\n"); + RTStrmPrintf(pStrm, "options: \n"); + + + for (unsigned i = 0; i < RT_ELEMENTS(g_aCmdOptions); i++) + { + const char *pszHelp; + switch (g_aCmdOptions[i].iShort) + { + case 'h': + pszHelp = "Displays this help and exit"; + break; + case 'd': + pszHelp = "Use the specified serial port device"; + break; + case 'b': + pszHelp = "Use the given baudrate"; + break; + case 'p': + pszHelp = "Use the given parity, valid modes are: none, even, odd, mark, space"; + break; + case 'c': + pszHelp = "Use the given data bitcount, valid are: 5, 6, 7, 8"; + break; + case 's': + pszHelp = "Use the given stop bitcount, valid are: 1, 1.5, 2"; + break; + case 'm': + pszHelp = "Mode of the serial port, valid are: loopback, secondary, external"; + break; + case 'l': + pszHelp = "Use the given serial port device as the secondary device"; + break; + case 't': + pszHelp = "The tests to run separated by ':'"; + break; + case 'x': + pszHelp = "Number of bytes to transmit during read/write tests"; + break; + default: + pszHelp = "Option undocumented"; + break; + } + char szOpt[256]; + RTStrPrintf(szOpt, sizeof(szOpt), "%s, -%c", g_aCmdOptions[i].pszLong, g_aCmdOptions[i].iShort); + RTStrmPrintf(pStrm, " %-30s%s\n", szOpt, pszHelp); + } +} + + +int main(int argc, char *argv[]) +{ + /* + * Init IPRT and globals. + */ + int rc = RTTestInitAndCreate("SerialTest", &g_hTest); + if (rc) + return rc; + + /* + * Default values. + */ + const char *pszDevice = NULL; + const char *pszDeviceSecondary = NULL; + PSERIALTESTDESC paTests = NULL; + + RTGETOPTUNION ValueUnion; + RTGETOPTSTATE GetState; + RTGetOptInit(&GetState, argc, argv, g_aCmdOptions, RT_ELEMENTS(g_aCmdOptions), 1, 0 /* fFlags */); + while ((rc = RTGetOpt(&GetState, &ValueUnion))) + { + switch (rc) + { + case 'h': + serialTestUsage(g_pStdOut); + return RTEXITCODE_SUCCESS; + case 'v': + g_cVerbosity++; + break; + case 'd': + pszDevice = ValueUnion.psz; + break; + case 'l': + pszDeviceSecondary = ValueUnion.psz; + break; + case 'b': + g_SerialPortCfg.uBaudRate = ValueUnion.u32; + break; + case 'p': + if (!RTStrICmp(ValueUnion.psz, "none")) + g_SerialPortCfg.enmParity = RTSERIALPORTPARITY_NONE; + else if (!RTStrICmp(ValueUnion.psz, "even")) + g_SerialPortCfg.enmParity = RTSERIALPORTPARITY_EVEN; + else if (!RTStrICmp(ValueUnion.psz, "odd")) + g_SerialPortCfg.enmParity = RTSERIALPORTPARITY_ODD; + else if (!RTStrICmp(ValueUnion.psz, "mark")) + g_SerialPortCfg.enmParity = RTSERIALPORTPARITY_MARK; + else if (!RTStrICmp(ValueUnion.psz, "space")) + g_SerialPortCfg.enmParity = RTSERIALPORTPARITY_SPACE; + else + { + RTPrintf("Unknown parity \"%s\" given\n", ValueUnion.psz); + return RTEXITCODE_FAILURE; + } + break; + case 'c': + if (ValueUnion.u32 == 5) + g_SerialPortCfg.enmDataBitCount = RTSERIALPORTDATABITS_5BITS; + else if (ValueUnion.u32 == 6) + g_SerialPortCfg.enmDataBitCount = RTSERIALPORTDATABITS_6BITS; + else if (ValueUnion.u32 == 7) + g_SerialPortCfg.enmDataBitCount = RTSERIALPORTDATABITS_7BITS; + else if (ValueUnion.u32 == 8) + g_SerialPortCfg.enmDataBitCount = RTSERIALPORTDATABITS_8BITS; + else + { + RTPrintf("Unknown data bitcount \"%u\" given\n", ValueUnion.u32); + return RTEXITCODE_FAILURE; + } + break; + case 's': + if (!RTStrICmp(ValueUnion.psz, "1")) + g_SerialPortCfg.enmStopBitCount = RTSERIALPORTSTOPBITS_ONE; + else if (!RTStrICmp(ValueUnion.psz, "1.5")) + g_SerialPortCfg.enmStopBitCount = RTSERIALPORTSTOPBITS_ONEPOINTFIVE; + else if (!RTStrICmp(ValueUnion.psz, "2")) + g_SerialPortCfg.enmStopBitCount = RTSERIALPORTSTOPBITS_TWO; + else + { + RTPrintf("Unknown stop bitcount \"%s\" given\n", ValueUnion.psz); + return RTEXITCODE_FAILURE; + } + break; + case 'm': + if (!RTStrICmp(ValueUnion.psz, "loopback")) + g_enmMode = SERIALTESTMODE_LOOPBACK; + else if (!RTStrICmp(ValueUnion.psz, "secondary")) + g_enmMode = SERIALTESTMODE_SECONDARY; + else if (!RTStrICmp(ValueUnion.psz, "external")) + g_enmMode = SERIALTESTMODE_EXTERNAL; + else + { + RTPrintf("Unknown serial test mode \"%s\" given\n", ValueUnion.psz); + return RTEXITCODE_FAILURE; + } + break; + case 't': + paTests = serialTestSelectFromCmdLine(ValueUnion.psz); + if (!paTests) + return RTEXITCODE_FAILURE; + break; + case 'x': + g_cbTx = ValueUnion.u32; + break; + default: + return RTGetOptPrintError(rc, &ValueUnion); + } + } + + if (g_enmMode == SERIALTESTMODE_SECONDARY && !pszDeviceSecondary) + { + RTPrintf("Mode set to secondary device but no secondary device given\n"); + return RTEXITCODE_FAILURE; + } + + if (!paTests) + { + /* Select all. */ + paTests = (PSERIALTESTDESC)RTMemAllocZ((RT_ELEMENTS(g_aSerialTests) + 1) * sizeof(SERIALTESTDESC)); + if (RT_UNLIKELY(!paTests)) + { + RTPrintf("Failed to allocate memory for test descriptors\n"); + return RTEXITCODE_FAILURE; + } + memcpy(paTests, &g_aSerialTests[0], RT_ELEMENTS(g_aSerialTests) * sizeof(SERIALTESTDESC)); + } + + rc = RTRandAdvCreateParkMiller(&g_hRand); + if (RT_FAILURE(rc)) + { + RTPrintf("Failed to create random number generator: %Rrc\n", rc); + return RTEXITCODE_FAILURE; + } + + rc = RTRandAdvSeed(g_hRand, UINT64_C(0x123456789abcdef)); + AssertRC(rc); + + /* + * Start testing. + */ + RTTestBanner(g_hTest); + + if (pszDevice) + { + uint32_t fFlags = RTSERIALPORT_OPEN_F_READ + | RTSERIALPORT_OPEN_F_WRITE + | RTSERIALPORT_OPEN_F_SUPPORT_STATUS_LINE_MONITORING; + + RTTestSub(g_hTest, "Opening device"); + rc = RTSerialPortOpen(&g_hSerialPort, pszDevice, fFlags); + if (RT_SUCCESS(rc)) + { + if (g_enmMode == SERIALTESTMODE_SECONDARY) + { + RTTestSub(g_hTest, "Opening secondary device"); + rc = RTSerialPortOpen(&g_hSerialPortSecondary, pszDeviceSecondary, fFlags); + if (RT_FAILURE(rc)) + RTTestFailed(g_hTest, "Opening secondary device \"%s\" failed with %Rrc\n", pszDevice, rc); + } + + if (RT_SUCCESS(rc)) + { + RTTestSub(g_hTest, "Setting serial port configuration"); + + rc = RTSerialPortCfgSet(g_hSerialPort, &g_SerialPortCfg ,NULL); + if (RT_SUCCESS(rc)) + { + if (g_enmMode == SERIALTESTMODE_SECONDARY) + { + RTTestSub(g_hTest, "Setting serial port configuration for secondary device"); + rc = RTSerialPortCfgSet(g_hSerialPortSecondary, &g_SerialPortCfg, NULL); + if (RT_FAILURE(rc)) + RTTestFailed(g_hTest, "Setting configuration of secondary device \"%s\" failed with %Rrc\n", pszDevice, rc); + } + + if (RT_SUCCESS(rc)) + { + SERIALTEST Test; + PSERIALTESTDESC pTest = &paTests[0]; + + Test.hTest = g_hTest; + Test.hSerialPort = g_hSerialPort; + Test.pSerialCfg = &g_SerialPortCfg; + + while (pTest->pszId) + { + RTTestSub(g_hTest, pTest->pszDesc); + rc = pTest->pfnRun(&Test); + if ( RT_FAILURE(rc) + || RTTestErrorCount(g_hTest) > 0) + RTTestFailed(g_hTest, "Running test \"%s\" failed (%Rrc, cErrors=%u)\n", + pTest->pszId, rc, RTTestErrorCount(g_hTest)); + + RTTestSubDone(g_hTest); + pTest++; + } + } + } + else + RTTestFailed(g_hTest, "Setting configuration of device \"%s\" failed with %Rrc\n", pszDevice, rc); + + RTSerialPortClose(g_hSerialPort); + } + } + else + RTTestFailed(g_hTest, "Opening device \"%s\" failed with %Rrc\n", pszDevice, rc); + } + else + RTTestFailed(g_hTest, "No device given on command line\n"); + + RTRandAdvDestroy(g_hRand); + RTMemFree(paTests); + RTEXITCODE rcExit = RTTestSummaryAndDestroy(g_hTest); + return rcExit; +} + |