diff options
Diffstat (limited to 'src/libs/xpcom18a4/nsprpub/pr/include/prerr.h')
| -rw-r--r-- | src/libs/xpcom18a4/nsprpub/pr/include/prerr.h | 278 |
1 files changed, 278 insertions, 0 deletions
diff --git a/src/libs/xpcom18a4/nsprpub/pr/include/prerr.h b/src/libs/xpcom18a4/nsprpub/pr/include/prerr.h new file mode 100644 index 00000000..79294847 --- /dev/null +++ b/src/libs/xpcom18a4/nsprpub/pr/include/prerr.h @@ -0,0 +1,278 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is the Netscape Portable Runtime (NSPR). + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +#ifndef prerr_h___ +#define prerr_h___ + +/* + * + * prerr.h + * This file is automatically generated; please do not edit it. + */ + +/* Memory allocation attempt failed */ +#define PR_OUT_OF_MEMORY_ERROR (-6000L) + +/* Invalid file descriptor */ +#define PR_BAD_DESCRIPTOR_ERROR (-5999L) + +/* The operation would have blocked */ +#define PR_WOULD_BLOCK_ERROR (-5998L) + +/* Invalid memory address argument */ +#define PR_ACCESS_FAULT_ERROR (-5997L) + +/* Invalid function for file type */ +#define PR_INVALID_METHOD_ERROR (-5996L) + +/* Invalid memory address argument */ +#define PR_ILLEGAL_ACCESS_ERROR (-5995L) + +/* Some unknown error has occurred */ +#define PR_UNKNOWN_ERROR (-5994L) + +/* Operation interrupted by another thread */ +#define PR_PENDING_INTERRUPT_ERROR (-5993L) + +/* function not implemented */ +#define PR_NOT_IMPLEMENTED_ERROR (-5992L) + +/* I/O function error */ +#define PR_IO_ERROR (-5991L) + +/* I/O operation timed out */ +#define PR_IO_TIMEOUT_ERROR (-5990L) + +/* I/O operation on busy file descriptor */ +#define PR_IO_PENDING_ERROR (-5989L) + +/* The directory could not be opened */ +#define PR_DIRECTORY_OPEN_ERROR (-5988L) + +/* Invalid function argument */ +#define PR_INVALID_ARGUMENT_ERROR (-5987L) + +/* Network address not available (in use?) */ +#define PR_ADDRESS_NOT_AVAILABLE_ERROR (-5986L) + +/* Network address type not supported */ +#define PR_ADDRESS_NOT_SUPPORTED_ERROR (-5985L) + +/* Already connected */ +#define PR_IS_CONNECTED_ERROR (-5984L) + +/* Network address is invalid */ +#define PR_BAD_ADDRESS_ERROR (-5983L) + +/* Local Network address is in use */ +#define PR_ADDRESS_IN_USE_ERROR (-5982L) + +/* Connection refused by peer */ +#define PR_CONNECT_REFUSED_ERROR (-5981L) + +/* Network address is presently unreachable */ +#define PR_NETWORK_UNREACHABLE_ERROR (-5980L) + +/* Connection attempt timed out */ +#define PR_CONNECT_TIMEOUT_ERROR (-5979L) + +/* Network file descriptor is not connected */ +#define PR_NOT_CONNECTED_ERROR (-5978L) + +/* Failure to load dynamic library */ +#define PR_LOAD_LIBRARY_ERROR (-5977L) + +/* Failure to unload dynamic library */ +#define PR_UNLOAD_LIBRARY_ERROR (-5976L) + +/* Symbol not found in any of the loaded dynamic libraries */ +#define PR_FIND_SYMBOL_ERROR (-5975L) + +/* Insufficient system resources */ +#define PR_INSUFFICIENT_RESOURCES_ERROR (-5974L) + +/* A directory lookup on a network address has failed */ +#define PR_DIRECTORY_LOOKUP_ERROR (-5973L) + +/* Attempt to access a TPD key that is out of range */ +#define PR_TPD_RANGE_ERROR (-5972L) + +/* Process open FD table is full */ +#define PR_PROC_DESC_TABLE_FULL_ERROR (-5971L) + +/* System open FD table is full */ +#define PR_SYS_DESC_TABLE_FULL_ERROR (-5970L) + +/* Network operation attempted on non-network file descriptor */ +#define PR_NOT_SOCKET_ERROR (-5969L) + +/* TCP-specific function attempted on a non-TCP file descriptor */ +#define PR_NOT_TCP_SOCKET_ERROR (-5968L) + +/* TCP file descriptor is already bound */ +#define PR_SOCKET_ADDRESS_IS_BOUND_ERROR (-5967L) + +/* Access Denied */ +#define PR_NO_ACCESS_RIGHTS_ERROR (-5966L) + +/* The requested operation is not supported by the platform */ +#define PR_OPERATION_NOT_SUPPORTED_ERROR (-5965L) + +/* The host operating system does not support the protocol requested */ +#define PR_PROTOCOL_NOT_SUPPORTED_ERROR (-5964L) + +/* Access to the remote file has been severed */ +#define PR_REMOTE_FILE_ERROR (-5963L) + +/* The value requested is too large to be stored in the data buffer provided */ +#define PR_BUFFER_OVERFLOW_ERROR (-5962L) + +/* TCP connection reset by peer */ +#define PR_CONNECT_RESET_ERROR (-5961L) + +/* Unused */ +#define PR_RANGE_ERROR (-5960L) + +/* The operation would have deadlocked */ +#define PR_DEADLOCK_ERROR (-5959L) + +/* The file is already locked */ +#define PR_FILE_IS_LOCKED_ERROR (-5958L) + +/* Write would result in file larger than the system allows */ +#define PR_FILE_TOO_BIG_ERROR (-5957L) + +/* The device for storing the file is full */ +#define PR_NO_DEVICE_SPACE_ERROR (-5956L) + +/* Unused */ +#define PR_PIPE_ERROR (-5955L) + +/* Unused */ +#define PR_NO_SEEK_DEVICE_ERROR (-5954L) + +/* Cannot perform a normal file operation on a directory */ +#define PR_IS_DIRECTORY_ERROR (-5953L) + +/* Symbolic link loop */ +#define PR_LOOP_ERROR (-5952L) + +/* File name is too long */ +#define PR_NAME_TOO_LONG_ERROR (-5951L) + +/* File not found */ +#define PR_FILE_NOT_FOUND_ERROR (-5950L) + +/* Cannot perform directory operation on a normal file */ +#define PR_NOT_DIRECTORY_ERROR (-5949L) + +/* Cannot write to a read-only file system */ +#define PR_READ_ONLY_FILESYSTEM_ERROR (-5948L) + +/* Cannot delete a directory that is not empty */ +#define PR_DIRECTORY_NOT_EMPTY_ERROR (-5947L) + +/* Cannot delete or rename a file object while the file system is busy */ +#define PR_FILESYSTEM_MOUNTED_ERROR (-5946L) + +/* Cannot rename a file to a file system on another device */ +#define PR_NOT_SAME_DEVICE_ERROR (-5945L) + +/* The directory object in the file system is corrupted */ +#define PR_DIRECTORY_CORRUPTED_ERROR (-5944L) + +/* Cannot create or rename a filename that already exists */ +#define PR_FILE_EXISTS_ERROR (-5943L) + +/* Directory is full. No additional filenames may be added */ +#define PR_MAX_DIRECTORY_ENTRIES_ERROR (-5942L) + +/* The required device was in an invalid state */ +#define PR_INVALID_DEVICE_STATE_ERROR (-5941L) + +/* The device is locked */ +#define PR_DEVICE_IS_LOCKED_ERROR (-5940L) + +/* No more entries in the directory */ +#define PR_NO_MORE_FILES_ERROR (-5939L) + +/* Encountered end of file */ +#define PR_END_OF_FILE_ERROR (-5938L) + +/* Seek error */ +#define PR_FILE_SEEK_ERROR (-5937L) + +/* The file is busy */ +#define PR_FILE_IS_BUSY_ERROR (-5936L) + +/* The I/O operation was aborted */ +#define PR_OPERATION_ABORTED_ERROR (-5935L) + +/* Operation is still in progress (probably a non-blocking connect) */ +#define PR_IN_PROGRESS_ERROR (-5934L) + +/* Operation has already been initiated (probably a non-blocking connect) */ +#define PR_ALREADY_INITIATED_ERROR (-5933L) + +/* The wait group is empty */ +#define PR_GROUP_EMPTY_ERROR (-5932L) + +/* Object state improper for request */ +#define PR_INVALID_STATE_ERROR (-5931L) + +/* Network is down */ +#define PR_NETWORK_DOWN_ERROR (-5930L) + +/* Socket shutdown */ +#define PR_SOCKET_SHUTDOWN_ERROR (-5929L) + +/* Connection aborted */ +#define PR_CONNECT_ABORTED_ERROR (-5928L) + +/* Host is unreachable */ +#define PR_HOST_UNREACHABLE_ERROR (-5927L) + +/* The library is not loaded */ +#define PR_LIBRARY_NOT_LOADED_ERROR (-5926L) + +/* Placeholder for the end of the list */ +#define PR_MAX_ERROR (-5925L) + +extern void nspr_InitializePRErrorTable(void); +#define ERROR_TABLE_BASE_nspr (-6000L) + +#endif /* prerr_h___ */ |