diff options
Diffstat (limited to 'src/libs/xpcom18a4/nsprpub/pr/tests/attach.c')
| -rw-r--r-- | src/libs/xpcom18a4/nsprpub/pr/tests/attach.c | 392 |
1 files changed, 392 insertions, 0 deletions
diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/attach.c b/src/libs/xpcom18a4/nsprpub/pr/tests/attach.c new file mode 100644 index 00000000..20da8ec3 --- /dev/null +++ b/src/libs/xpcom18a4/nsprpub/pr/tests/attach.c @@ -0,0 +1,392 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is the Netscape Portable Runtime (NSPR). + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/*********************************************************************** +** 1996 - Netscape Communications Corporation +** +** Name: attach.c +** +** Description: Platform-specific code to create a native thread. The native thread will +** repeatedly call PR_AttachThread and PR_DetachThread. The +** primordial thread waits for this new thread to finish. +** +** Modification History: +** 13-May-97 AGarcia- Converted the test to accomodate the debug_mode flag. +** The debug mode will print all of the printfs associated with this test. +** The regress mode will be the default mode. Since the regress tool limits +** the output to a one line status:PASS or FAIL,all of the printf statements +** have been handled with an if (debug_mode) statement. +** 04-June-97 AGarcia removed the Test_Result function. Regress tool has been updated to +** recognize the return code from tha main program. +** 12-June-97 Revert to return code 0 and 1. +***********************************************************************/ + +/*********************************************************************** +** Includes +***********************************************************************/ + +/* Used to get the command line option */ +#include "nspr.h" +#include "pprthred.h" +#include "plgetopt.h" + +#include <stdio.h> + +#ifdef WIN32 +#include <windows.h> +#include <process.h> +#elif defined(_PR_PTHREADS) +#include <pthread.h> +#include "md/_pth.h" +#elif defined(IRIX) +#include <sys/types.h> +#include <sys/prctl.h> +#include <sys/wait.h> +#include <errno.h> +#elif defined(SOLARIS) +#include <thread.h> +#elif defined(OS2) +#define INCL_DOS +#define INCL_ERRORS +#include <os2.h> +#include <process.h> +#elif defined(XP_BEOS) +#include <kernel/OS.h> +#endif + +#define DEFAULT_COUNT 1000 +PRIntn failed_already=0; +PRIntn debug_mode; + + +int count; + + +static void +AttachDetach(void) +{ + PRThread *me; + PRInt32 index; + + for (index=0;index<count; index++) { + me = PR_AttachThread(PR_USER_THREAD, + PR_PRIORITY_NORMAL, + NULL); + + if (!me) { + fprintf(stderr, "Error attaching thread %d: PR_AttachThread failed\n", + count); + failed_already = 1; + return; + } + PR_DetachThread(); + } +} + +/************************************************************************/ + +static void Measure(void (*func)(void), const char *msg) +{ + PRIntervalTime start, stop; + double d; + + start = PR_IntervalNow(); + (*func)(); + stop = PR_IntervalNow(); + + d = (double)PR_IntervalToMicroseconds(stop - start); + if (debug_mode) + printf("%40s: %6.2f usec\n", msg, d / count); +} + +#ifdef WIN32 +static unsigned __stdcall threadStartFunc(void *arg) +#elif defined(IRIX) && !defined(_PR_PTHREADS) +static void threadStartFunc(void *arg) +#elif defined(XP_BEOS) +static int32 threadStartFunc(void *arg) +#else +static void * threadStartFunc(void *arg) +#endif +{ +#ifdef _PR_DCETHREADS + { + int rv; + pthread_t self = pthread_self(); + rv = pthread_detach(&self); + if (debug_mode) PR_ASSERT(0 == rv); + else if (0 != rv) failed_already=1; + } +#endif + + Measure(AttachDetach, "Attach/Detach"); + +#ifndef IRIX + return 0; +#endif +} + +int main(int argc, char **argv) +{ +#ifdef _PR_PTHREADS + int rv; + pthread_t threadID; + pthread_attr_t attr; +#elif defined(SOLARIS) + int rv; + thread_t threadID; +#elif defined(WIN32) + DWORD rv; + unsigned threadID; + HANDLE hThread; +#elif defined(IRIX) + int rv; + int threadID; +#elif defined(OS2) + int rv; + TID threadID; +#elif defined(XP_BEOS) + thread_id threadID; + int32 threadRV; + status_t waitRV; +#endif + + /* The command line argument: -d is used to determine if the test is being run + in debug mode. The regress tool requires only one line output:PASS or FAIL. + All of the printfs associated with this test has been handled with a if (debug_mode) + test. + Usage: test_name [-d] [-c n] + */ + PLOptStatus os; + PLOptState *opt = PL_CreateOptState(argc, argv, "dc:"); + while (PL_OPT_EOL != (os = PL_GetNextOpt(opt))) + { + if (PL_OPT_BAD == os) continue; + switch (opt->option) + { + case 'd': /* debug mode */ + debug_mode = 1; + break; + case 'c': /* loop count */ + count = atoi(opt->value); + break; + default: + break; + } + } + PL_DestroyOptState(opt); + +#if defined(WIN16) + printf("attach: This test is not valid for Win16\n"); + goto exit_now; +#endif + + if(0 == count) count = DEFAULT_COUNT; + + /* + * To force the implicit initialization of nspr20 + */ + PR_SetError(0, 0); + PR_STDIO_INIT(); + + /* + * Platform-specific code to create a native thread. The native + * thread will repeatedly call PR_AttachThread and PR_DetachThread. + * The primordial thread waits for this new thread to finish. + */ + +#ifdef _PR_PTHREADS + + rv = _PT_PTHREAD_ATTR_INIT(&attr); + if (debug_mode) PR_ASSERT(0 == rv); + else if (0 != rv) { + failed_already=1; + goto exit_now; + } + +#ifndef _PR_DCETHREADS + rv = pthread_attr_setdetachstate(&attr, PTHREAD_CREATE_JOINABLE); + if (debug_mode) PR_ASSERT(0 == rv); + else if (0 != rv) { + failed_already=1; + goto exit_now; + } +#endif /* !_PR_DCETHREADS */ + rv = _PT_PTHREAD_CREATE(&threadID, attr, threadStartFunc, NULL); + if (rv != 0) { + fprintf(stderr, "thread creation failed: error code %d\n", rv); + failed_already=1; + goto exit_now; + } + else { + if (debug_mode) + printf ("thread creation succeeded \n"); + + } + rv = _PT_PTHREAD_ATTR_DESTROY(&attr); + if (debug_mode) PR_ASSERT(0 == rv); + else if (0 != rv) { + failed_already=1; + goto exit_now; + } + rv = pthread_join(threadID, NULL); + if (debug_mode) PR_ASSERT(0 == rv); + else if (0 != rv) { + failed_already=1; + goto exit_now; + } + +#elif defined(SOLARIS) + + rv = thr_create(NULL, 0, threadStartFunc, NULL, 0, &threadID); + if (rv != 0) { + if(!debug_mode) { + failed_already=1; + goto exit_now; + } else + fprintf(stderr, "thread creation failed: error code %d\n", rv); + } + rv = thr_join(threadID, NULL, NULL); + if (debug_mode) PR_ASSERT(0 == rv); + else if (0 != rv) + { + failed_already=1; + goto exit_now; + } + + +#elif defined(WIN32) + + hThread = (HANDLE) _beginthreadex(NULL, 0, threadStartFunc, NULL, + 0, &threadID); + if (hThread == 0) { + fprintf(stderr, "thread creation failed: error code %d\n", + GetLastError()); + failed_already=1; + goto exit_now; + } + rv = WaitForSingleObject(hThread, INFINITE); + if (debug_mode)PR_ASSERT(rv != WAIT_FAILED); + else if (rv == WAIT_FAILED) { + failed_already=1; + goto exit_now; + } + +#elif defined(IRIX) + + threadID = sproc(threadStartFunc, PR_SALL, NULL); + if (threadID == -1) { + + fprintf(stderr, "thread creation failed: error code %d\n", + errno); + failed_already=1; + goto exit_now; + + } + else { + if (debug_mode) + printf ("thread creation succeeded \n"); + sleep(3); + goto exit_now; + } + rv = waitpid(threadID, NULL, 0); + if (debug_mode) PR_ASSERT(rv != -1); + else if (rv != -1) { + failed_already=1; + goto exit_now; + } + +#elif defined(OS2) + +# ifdef __EMX__ + threadID = (TID) _beginthread((void *)threadStartFunc, NULL, + 32768, NULL); +# else + threadID = (TID) _beginthread((void(* _Optlink)(void*))threadStartFunc, NULL, + 32768, NULL); +# endif + if (threadID == -1) { + fprintf(stderr, "thread creation failed: error code %d\n", errno); + failed_already=1; + goto exit_now; + } + rv = DosWaitThread(&threadID, DCWW_WAIT); + if (debug_mode) { + PR_ASSERT(rv == NO_ERROR); + } else if (rv != NO_ERROR) { + failed_already=1; + goto exit_now; + } + +#elif defined(XP_BEOS) + + threadID = spawn_thread(threadStartFunc, NULL, B_NORMAL_PRIORITY, NULL); + if (threadID <= B_ERROR) { + fprintf(stderr, "thread creation failed: error code %08lx\n", threadID); + failed_already = 1; + goto exit_now; + } + if (resume_thread(threadID) != B_OK) { + fprintf(stderr, "failed starting thread: error code %08lx\n", threadID); + failed_already = 1; + goto exit_now; + } + + waitRV = wait_for_thread(threadID, &threadRV); + if (debug_mode) + PR_ASSERT(waitRV == B_OK); + else if (waitRV != B_OK) { + failed_already = 1; + goto exit_now; + } + +#else + if (!debug_mode) + failed_already=1; + else + printf("The attach test does not apply to this platform because\n" + "either this platform does not have native threads or the\n" + "test needs to be written for this platform.\n"); + goto exit_now; +#endif + +exit_now: + if(failed_already) + return 1; + else + return 0; +} |