summaryrefslogtreecommitdiffstats
path: root/src/libs/xpcom18a4/nsprpub/pr/tests/layer.c
diff options
context:
space:
mode:
Diffstat (limited to 'src/libs/xpcom18a4/nsprpub/pr/tests/layer.c')
-rw-r--r--src/libs/xpcom18a4/nsprpub/pr/tests/layer.c465
1 files changed, 465 insertions, 0 deletions
diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/layer.c b/src/libs/xpcom18a4/nsprpub/pr/tests/layer.c
new file mode 100644
index 00000000..7eae46a2
--- /dev/null
+++ b/src/libs/xpcom18a4/nsprpub/pr/tests/layer.c
@@ -0,0 +1,465 @@
+/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
+/* ***** BEGIN LICENSE BLOCK *****
+ * Version: MPL 1.1/GPL 2.0/LGPL 2.1
+ *
+ * The contents of this file are subject to the Mozilla Public License Version
+ * 1.1 (the "License"); you may not use this file except in compliance with
+ * the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/
+ *
+ * Software distributed under the License is distributed on an "AS IS" basis,
+ * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
+ * for the specific language governing rights and limitations under the
+ * License.
+ *
+ * The Original Code is the Netscape Portable Runtime (NSPR).
+ *
+ * The Initial Developer of the Original Code is
+ * Netscape Communications Corporation.
+ * Portions created by the Initial Developer are Copyright (C) 1998-2000
+ * the Initial Developer. All Rights Reserved.
+ *
+ * Contributor(s):
+ *
+ * Alternatively, the contents of this file may be used under the terms of
+ * either the GNU General Public License Version 2 or later (the "GPL"), or
+ * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
+ * in which case the provisions of the GPL or the LGPL are applicable instead
+ * of those above. If you wish to allow use of your version of this file only
+ * under the terms of either the GPL or the LGPL, and not to allow others to
+ * use your version of this file under the terms of the MPL, indicate your
+ * decision by deleting the provisions above and replace them with the notice
+ * and other provisions required by the GPL or the LGPL. If you do not delete
+ * the provisions above, a recipient may use your version of this file under
+ * the terms of any one of the MPL, the GPL or the LGPL.
+ *
+ * ***** END LICENSE BLOCK ***** */
+
+#include "prio.h"
+#include "prprf.h"
+#include "prlog.h"
+#include "prnetdb.h"
+#include "prthread.h"
+
+#include "plerror.h"
+#include "plgetopt.h"
+#include "prwin16.h"
+
+#include <stdlib.h>
+
+/*
+** Testing layering of I/O
+**
+** The layered server
+** A thread that acts as a server. It creates a TCP listener with a dummy
+** layer pushed on top. Then listens for incoming connections. Each connection
+** request for connection will be layered as well, accept one request, echo
+** it back and close.
+**
+** The layered client
+** Pretty much what you'd expect.
+*/
+
+static PRFileDesc *logFile;
+static PRDescIdentity identity;
+static PRNetAddr server_address;
+
+static PRIOMethods myMethods;
+
+typedef enum Verbosity {silent, quiet, chatty, noisy} Verbosity;
+
+static PRIntn minor_iterations = 5;
+static PRIntn major_iterations = 1;
+static Verbosity verbosity = quiet;
+static PRUint16 default_port = 12273;
+
+static PRFileDesc *PushLayer(PRFileDesc *stack)
+{
+ PRFileDesc *layer = PR_CreateIOLayerStub(identity, &myMethods);
+ PRStatus rv = PR_PushIOLayer(stack, PR_GetLayersIdentity(stack), layer);
+ if (verbosity > quiet)
+ PR_fprintf(logFile, "Pushed layer(0x%x) onto stack(0x%x)\n", layer, stack);
+ PR_ASSERT(PR_SUCCESS == rv);
+ return stack;
+} /* PushLayer */
+
+static PRFileDesc *PushNewLayers(PRFileDesc *stack)
+{
+ PRDescIdentity tmp_identity;
+ PRFileDesc *layer;
+ PRStatus rv;
+
+ /* push a dummy layer */
+ tmp_identity = PR_GetUniqueIdentity("Dummy 1");
+ layer = PR_CreateIOLayerStub(tmp_identity, PR_GetDefaultIOMethods());
+ rv = PR_PushIOLayer(stack, PR_GetLayersIdentity(stack), layer);
+ if (verbosity > quiet)
+ PR_fprintf(logFile, "Pushed layer(0x%x) onto stack(0x%x)\n", layer,
+ stack);
+ PR_ASSERT(PR_SUCCESS == rv);
+
+ /* push a data procesing layer */
+ layer = PR_CreateIOLayerStub(identity, &myMethods);
+ rv = PR_PushIOLayer(stack, PR_GetLayersIdentity(stack), layer);
+ if (verbosity > quiet)
+ PR_fprintf(logFile, "Pushed layer(0x%x) onto stack(0x%x)\n", layer,
+ stack);
+ PR_ASSERT(PR_SUCCESS == rv);
+
+ /* push another dummy layer */
+ tmp_identity = PR_GetUniqueIdentity("Dummy 2");
+ layer = PR_CreateIOLayerStub(tmp_identity, PR_GetDefaultIOMethods());
+ rv = PR_PushIOLayer(stack, PR_GetLayersIdentity(stack), layer);
+ if (verbosity > quiet)
+ PR_fprintf(logFile, "Pushed layer(0x%x) onto stack(0x%x)\n", layer,
+ stack);
+ PR_ASSERT(PR_SUCCESS == rv);
+ return stack;
+} /* PushLayer */
+
+#if 0
+static PRFileDesc *PopLayer(PRFileDesc *stack)
+{
+ PRFileDesc *popped = PR_PopIOLayer(stack, identity);
+ if (verbosity > quiet)
+ PR_fprintf(logFile, "Popped layer(0x%x) from stack(0x%x)\n", popped, stack);
+ popped->dtor(popped);
+
+ return stack;
+} /* PopLayer */
+#endif
+
+static void PR_CALLBACK Client(void *arg)
+{
+ PRStatus rv;
+ PRUint8 buffer[100];
+ PRIntn empty_flags = 0;
+ PRIntn bytes_read, bytes_sent;
+ PRFileDesc *stack = (PRFileDesc*)arg;
+
+ /* Initialize the buffer so that Purify won't complain */
+ memset(buffer, 0, sizeof(buffer));
+
+ rv = PR_Connect(stack, &server_address, PR_INTERVAL_NO_TIMEOUT);
+ PR_ASSERT(PR_SUCCESS == rv);
+ while (minor_iterations-- > 0)
+ {
+ bytes_sent = PR_Send(
+ stack, buffer, sizeof(buffer), empty_flags, PR_INTERVAL_NO_TIMEOUT);
+ PR_ASSERT(sizeof(buffer) == bytes_sent);
+ if (verbosity > chatty)
+ PR_fprintf(logFile, "Client sending %d bytes\n", bytes_sent);
+ bytes_read = PR_Recv(
+ stack, buffer, bytes_sent, empty_flags, PR_INTERVAL_NO_TIMEOUT);
+ if (verbosity > chatty)
+ PR_fprintf(logFile, "Client receiving %d bytes\n", bytes_read);
+ PR_ASSERT(bytes_read == bytes_sent);
+ }
+
+ if (verbosity > quiet)
+ PR_fprintf(logFile, "Client shutting down stack\n");
+
+ rv = PR_Shutdown(stack, PR_SHUTDOWN_BOTH); PR_ASSERT(PR_SUCCESS == rv);
+} /* Client */
+
+static void PR_CALLBACK Server(void *arg)
+{
+ PRStatus rv;
+ PRUint8 buffer[100];
+ PRFileDesc *service;
+ PRUintn empty_flags = 0;
+ PRIntn bytes_read, bytes_sent;
+ PRFileDesc *stack = (PRFileDesc*)arg;
+ PRNetAddr client_address;
+
+ service = PR_Accept(stack, &client_address, PR_INTERVAL_NO_TIMEOUT);
+ if (verbosity > quiet)
+ PR_fprintf(logFile, "Server accepting connection\n");
+
+ do
+ {
+ bytes_read = PR_Recv(
+ service, buffer, sizeof(buffer), empty_flags, PR_INTERVAL_NO_TIMEOUT);
+ if (0 != bytes_read)
+ {
+ if (verbosity > chatty)
+ PR_fprintf(logFile, "Server receiving %d bytes\n", bytes_read);
+ PR_ASSERT(bytes_read > 0);
+ bytes_sent = PR_Send(
+ service, buffer, bytes_read, empty_flags, PR_INTERVAL_NO_TIMEOUT);
+ if (verbosity > chatty)
+ PR_fprintf(logFile, "Server sending %d bytes\n", bytes_sent);
+ PR_ASSERT(bytes_read == bytes_sent);
+ }
+
+ } while (0 != bytes_read);
+
+ if (verbosity > quiet)
+ PR_fprintf(logFile, "Server shutting down and closing stack\n");
+ rv = PR_Shutdown(service, PR_SHUTDOWN_BOTH); PR_ASSERT(PR_SUCCESS == rv);
+ rv = PR_Close(service); PR_ASSERT(PR_SUCCESS == rv);
+
+} /* Server */
+
+static PRInt32 PR_CALLBACK MyRecv(
+ PRFileDesc *fd, void *buf, PRInt32 amount,
+ PRIntn flags, PRIntervalTime timeout)
+{
+ char *b = (char*)buf;
+ PRFileDesc *lo = fd->lower;
+ PRInt32 rv, readin = 0, request = 0;
+ rv = lo->methods->recv(lo, &request, sizeof(request), flags, timeout);
+ if (verbosity > chatty) PR_fprintf(
+ logFile, "MyRecv sending permission for %d bytes\n", request);
+ if (0 < rv)
+ {
+ if (verbosity > chatty) PR_fprintf(
+ logFile, "MyRecv received permission request for %d bytes\n", request);
+ rv = lo->methods->send(
+ lo, &request, sizeof(request), flags, timeout);
+ if (0 < rv)
+ {
+ if (verbosity > chatty) PR_fprintf(
+ logFile, "MyRecv sending permission for %d bytes\n", request);
+ while (readin < request)
+ {
+ rv = lo->methods->recv(
+ lo, b + readin, amount - readin, flags, timeout);
+ if (rv <= 0) break;
+ if (verbosity > chatty) PR_fprintf(
+ logFile, "MyRecv received %d bytes\n", rv);
+ readin += rv;
+ }
+ rv = readin;
+ }
+ }
+ return rv;
+} /* MyRecv */
+
+static PRInt32 PR_CALLBACK MySend(
+ PRFileDesc *fd, const void *buf, PRInt32 amount,
+ PRIntn flags, PRIntervalTime timeout)
+{
+ PRFileDesc *lo = fd->lower;
+ const char *b = (const char*)buf;
+ PRInt32 rv, wroteout = 0, request;
+ if (verbosity > chatty) PR_fprintf(
+ logFile, "MySend asking permission to send %d bytes\n", amount);
+ rv = lo->methods->send(lo, &amount, sizeof(amount), flags, timeout);
+ if (0 < rv)
+ {
+ rv = lo->methods->recv(
+ lo, &request, sizeof(request), flags, timeout);
+ if (0 < rv)
+ {
+ PR_ASSERT(request == amount);
+ if (verbosity > chatty) PR_fprintf(
+ logFile, "MySend got permission to send %d bytes\n", request);
+ while (wroteout < request)
+ {
+ rv = lo->methods->send(
+ lo, b + wroteout, request - wroteout, flags, timeout);
+ if (rv <= 0) break;
+ if (verbosity > chatty) PR_fprintf(
+ logFile, "MySend wrote %d bytes\n", rv);
+ wroteout += rv;
+ }
+ rv = amount;
+ }
+ }
+ return rv;
+} /* MySend */
+
+static Verbosity ChangeVerbosity(Verbosity verbosity, PRIntn delta)
+{
+ PRIntn verbage = (PRIntn)verbosity + delta;
+ if (verbage < (PRIntn)silent) verbage = (PRIntn)silent;
+ else if (verbage > (PRIntn)noisy) verbage = (PRIntn)noisy;
+ return (Verbosity)verbage;
+} /* ChangeVerbosity */
+
+PRIntn main(PRIntn argc, char **argv)
+{
+ PRStatus rv;
+ PRIntn mits;
+ PLOptStatus os;
+ PRFileDesc *client, *service;
+ PRFileDesc *client_stack, *service_stack;
+ PRNetAddr any_address;
+ const char *server_name = NULL;
+ const PRIOMethods *stubMethods;
+ PRThread *client_thread, *server_thread;
+ PRThreadScope thread_scope = PR_LOCAL_THREAD;
+ PLOptState *opt = PL_CreateOptState(argc, argv, "dqGC:c:p:");
+ while (PL_OPT_EOL != (os = PL_GetNextOpt(opt)))
+ {
+ if (PL_OPT_BAD == os) continue;
+ switch (opt->option)
+ {
+ case 0:
+ server_name = opt->value;
+ break;
+ case 'd': /* debug mode */
+ if (verbosity < noisy)
+ verbosity = ChangeVerbosity(verbosity, 1);
+ break;
+ case 'q': /* debug mode */
+ if (verbosity > silent)
+ verbosity = ChangeVerbosity(verbosity, -1);
+ break;
+ case 'G': /* use global threads */
+ thread_scope = PR_GLOBAL_THREAD;
+ break;
+ case 'C': /* number of threads waiting */
+ major_iterations = atoi(opt->value);
+ break;
+ case 'c': /* number of client threads */
+ minor_iterations = atoi(opt->value);
+ break;
+ case 'p': /* default port */
+ default_port = atoi(opt->value);
+ break;
+ default:
+ break;
+ }
+ }
+ PL_DestroyOptState(opt);
+ PR_STDIO_INIT();
+
+ logFile = PR_GetSpecialFD(PR_StandardError);
+
+ identity = PR_GetUniqueIdentity("Dummy");
+ stubMethods = PR_GetDefaultIOMethods();
+
+ /*
+ ** The protocol we're going to implement is one where in order to initiate
+ ** a send, the sender must first solicit permission. Therefore, every
+ ** send is really a send - receive - send sequence.
+ */
+ myMethods = *stubMethods; /* first get the entire batch */
+ myMethods.recv = MyRecv; /* then override the ones we care about */
+ myMethods.send = MySend; /* then override the ones we care about */
+
+ if (NULL == server_name)
+ rv = PR_InitializeNetAddr(
+ PR_IpAddrLoopback, default_port, &server_address);
+ else
+ {
+ rv = PR_StringToNetAddr(server_name, &server_address);
+ PR_ASSERT(PR_SUCCESS == rv);
+ rv = PR_InitializeNetAddr(
+ PR_IpAddrNull, default_port, &server_address);
+ }
+ PR_ASSERT(PR_SUCCESS == rv);
+
+ /* one type w/o layering */
+
+ mits = minor_iterations;
+ while (major_iterations-- > 0)
+ {
+ if (verbosity > silent)
+ PR_fprintf(logFile, "Beginning non-layered test\n");
+ client = PR_NewTCPSocket(); PR_ASSERT(NULL != client);
+ service = PR_NewTCPSocket(); PR_ASSERT(NULL != service);
+ rv = PR_InitializeNetAddr(PR_IpAddrAny, default_port, &any_address);
+ PR_ASSERT(PR_SUCCESS == rv);
+ rv = PR_Bind(service, &any_address); PR_ASSERT(PR_SUCCESS == rv);
+ rv = PR_Listen(service, 10); PR_ASSERT(PR_SUCCESS == rv);
+
+ minor_iterations = mits;
+ server_thread = PR_CreateThread(
+ PR_USER_THREAD, Server, service,
+ PR_PRIORITY_HIGH, thread_scope,
+ PR_JOINABLE_THREAD, 16 * 1024);
+ PR_ASSERT(NULL != server_thread);
+
+ client_thread = PR_CreateThread(
+ PR_USER_THREAD, Client, client,
+ PR_PRIORITY_NORMAL, thread_scope,
+ PR_JOINABLE_THREAD, 16 * 1024);
+ PR_ASSERT(NULL != client_thread);
+
+ rv = PR_JoinThread(client_thread);
+ PR_ASSERT(PR_SUCCESS == rv);
+ rv = PR_JoinThread(server_thread);
+ PR_ASSERT(PR_SUCCESS == rv);
+
+ rv = PR_Close(client); PR_ASSERT(PR_SUCCESS == rv);
+ rv = PR_Close(service); PR_ASSERT(PR_SUCCESS == rv);
+ if (verbosity > silent)
+ PR_fprintf(logFile, "Ending non-layered test\n");
+
+ /* with layering */
+ if (verbosity > silent)
+ PR_fprintf(logFile, "Beginning layered test\n");
+ client = PR_NewTCPSocket(); PR_ASSERT(NULL != client);
+ PushLayer(client);
+ service = PR_NewTCPSocket(); PR_ASSERT(NULL != service);
+ PushLayer(service);
+ rv = PR_InitializeNetAddr(PR_IpAddrAny, default_port, &any_address);
+ PR_ASSERT(PR_SUCCESS == rv);
+ rv = PR_Bind(service, &any_address); PR_ASSERT(PR_SUCCESS == rv);
+ rv = PR_Listen(service, 10); PR_ASSERT(PR_SUCCESS == rv);
+
+ minor_iterations = mits;
+ server_thread = PR_CreateThread(
+ PR_USER_THREAD, Server, service,
+ PR_PRIORITY_HIGH, thread_scope,
+ PR_JOINABLE_THREAD, 16 * 1024);
+ PR_ASSERT(NULL != server_thread);
+
+ client_thread = PR_CreateThread(
+ PR_USER_THREAD, Client, client,
+ PR_PRIORITY_NORMAL, thread_scope,
+ PR_JOINABLE_THREAD, 16 * 1024);
+ PR_ASSERT(NULL != client_thread);
+
+ rv = PR_JoinThread(client_thread);
+ PR_ASSERT(PR_SUCCESS == rv);
+ rv = PR_JoinThread(server_thread);
+ PR_ASSERT(PR_SUCCESS == rv);
+
+ rv = PR_Close(client); PR_ASSERT(PR_SUCCESS == rv);
+ rv = PR_Close(service); PR_ASSERT(PR_SUCCESS == rv);
+ /* with layering, using new style stack */
+ if (verbosity > silent)
+ PR_fprintf(logFile,
+ "Beginning layered test with new style stack\n");
+ client = PR_NewTCPSocket(); PR_ASSERT(NULL != client);
+ client_stack = PR_CreateIOLayer(client);
+ PushNewLayers(client_stack);
+ service = PR_NewTCPSocket(); PR_ASSERT(NULL != service);
+ service_stack = PR_CreateIOLayer(service);
+ PushNewLayers(service_stack);
+ rv = PR_InitializeNetAddr(PR_IpAddrAny, default_port, &any_address);
+ PR_ASSERT(PR_SUCCESS == rv);
+ rv = PR_Bind(service, &any_address); PR_ASSERT(PR_SUCCESS == rv);
+ rv = PR_Listen(service, 10); PR_ASSERT(PR_SUCCESS == rv);
+
+ minor_iterations = mits;
+ server_thread = PR_CreateThread(
+ PR_USER_THREAD, Server, service_stack,
+ PR_PRIORITY_HIGH, thread_scope,
+ PR_JOINABLE_THREAD, 16 * 1024);
+ PR_ASSERT(NULL != server_thread);
+
+ client_thread = PR_CreateThread(
+ PR_USER_THREAD, Client, client_stack,
+ PR_PRIORITY_NORMAL, thread_scope,
+ PR_JOINABLE_THREAD, 16 * 1024);
+ PR_ASSERT(NULL != client_thread);
+
+ rv = PR_JoinThread(client_thread);
+ PR_ASSERT(PR_SUCCESS == rv);
+ rv = PR_JoinThread(server_thread);
+ PR_ASSERT(PR_SUCCESS == rv);
+
+ rv = PR_Close(client_stack); PR_ASSERT(PR_SUCCESS == rv);
+ rv = PR_Close(service_stack); PR_ASSERT(PR_SUCCESS == rv);
+ if (verbosity > silent)
+ PR_fprintf(logFile, "Ending layered test\n");
+ }
+ return 0;
+} /* main */
+
+/* layer.c */
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-27 22:13:45 +0000