diff options
Diffstat (limited to 'src/libs/xpcom18a4/nsprpub/pr/tests/poll_nm.c')
| -rw-r--r-- | src/libs/xpcom18a4/nsprpub/pr/tests/poll_nm.c | 399 |
1 files changed, 399 insertions, 0 deletions
diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/poll_nm.c b/src/libs/xpcom18a4/nsprpub/pr/tests/poll_nm.c new file mode 100644 index 00000000..63a64a63 --- /dev/null +++ b/src/libs/xpcom18a4/nsprpub/pr/tests/poll_nm.c @@ -0,0 +1,399 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is the Netscape Portable Runtime (NSPR). + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/*********************************************************************** +** +** Name: prpoll_norm.c +** +** Description: This program tests PR_Poll with sockets. +** Normal operation are tested +** +** Modification History: +** 19-May-97 AGarcia- Converted the test to accomodate the debug_mode flag. +** The debug mode will print all of the printfs associated with this test. +** The regress mode will be the default mode. Since the regress tool limits +** the output to a one line status:PASS or FAIL,all of the printf statements +** have been handled with an if (debug_mode) statement. +** 04-June-97 AGarcia removed the Test_Result function. Regress tool has been updated to +** recognize the return code from tha main program. +***********************************************************************/ + +/*********************************************************************** +** Includes +***********************************************************************/ +/* Used to get the command line option */ +#include "plgetopt.h" + +#include "prinit.h" +#include "prio.h" +#include "prlog.h" +#include "prprf.h" +#include "prnetdb.h" +#ifndef XP_MAC +#include "obsolete/probslet.h" +#else +#include "probslet.h" +#endif + +#ifndef XP_MAC +#include "private/pprio.h" +#else +#include "pprio.h" +#endif + +#include <stdio.h> +#include <string.h> +#include <stdlib.h> +PRIntn failed_already=0; +PRIntn debug_mode; + +#define NUM_ITERATIONS 5 + +#ifdef XP_MAC +int fprintf(FILE *stream, const char *fmt, ...) +{ +PR_LogPrint(fmt); +return 0; +} +#define printf PR_LogPrint +extern void SetupMacPrintfLog(char *logFile); +#endif + +static void PR_CALLBACK +clientThreadFunc(void *arg) +{ + PRUintn port = (PRUintn) arg; + PRFileDesc *sock; + PRNetAddr addr; + char buf[128]; + int i; + PRStatus sts; + PRInt32 n; + + addr.inet.family = PR_AF_INET; + addr.inet.port = PR_htons((PRUint16)port); + addr.inet.ip = PR_htonl(PR_INADDR_LOOPBACK); + memset(buf, 0, sizeof(buf)); + PR_snprintf(buf, sizeof(buf), "%hu", port); + + for (i = 0; i < NUM_ITERATIONS; i++) { + sock = PR_NewTCPSocket(); + PR_ASSERT(sock != NULL); + + sts = PR_Connect(sock, &addr, PR_INTERVAL_NO_TIMEOUT); + PR_ASSERT(sts == PR_SUCCESS); + + n = PR_Write(sock, buf, sizeof(buf)); + PR_ASSERT(n >= 0); + + sts = PR_Close(sock); + PR_ASSERT(sts == PR_SUCCESS); + } +} + +int main(int argc, char **argv) +{ + PRFileDesc *listenSock1 = NULL, *listenSock2 = NULL; + PRUint16 listenPort1, listenPort2; + PRNetAddr addr; + char buf[128]; + PRThread *clientThread; + PRPollDesc pds0[20], pds1[20], *pds, *other_pds; + PRIntn npds; + PRInt32 retVal; + PRIntn i, j; + PRSocketOptionData optval; + + /* The command line argument: -d is used to determine if the test is being run + in debug mode. The regress tool requires only one line output:PASS or FAIL. + All of the printfs associated with this test has been handled with a if (debug_mode) + test. + Usage: test_name -d + */ + PLOptStatus os; + PLOptState *opt = PL_CreateOptState(argc, argv, "d:"); + while (PL_OPT_EOL != (os = PL_GetNextOpt(opt))) + { + if (PL_OPT_BAD == os) continue; + switch (opt->option) + { + case 'd': /* debug mode */ + debug_mode = 1; + break; + default: + break; + } + } + PL_DestroyOptState(opt); + + /* main test */ + + PR_Init(PR_USER_THREAD, PR_PRIORITY_NORMAL, 0); + PR_STDIO_INIT(); + +#ifdef XP_MAC + debug_mode = 1; + SetupMacPrintfLog("poll_nm.log"); +#endif + + if (debug_mode) { + printf("This program tests PR_Poll with sockets.\n"); + printf("Normal operation are tested.\n\n"); + } + + /* Create two listening sockets */ + if ((listenSock1 = PR_NewTCPSocket()) == NULL) { + fprintf(stderr, "Can't create a new TCP socket\n"); + failed_already=1; + goto exit_now; + } + memset(&addr, 0, sizeof(addr)); + addr.inet.family = PR_AF_INET; + addr.inet.ip = PR_htonl(PR_INADDR_ANY); + addr.inet.port = PR_htons(0); + if (PR_Bind(listenSock1, &addr) == PR_FAILURE) { + fprintf(stderr, "Can't bind socket\n"); + failed_already=1; + goto exit_now; + } + if (PR_GetSockName(listenSock1, &addr) == PR_FAILURE) { + fprintf(stderr, "PR_GetSockName failed\n"); + failed_already=1; + goto exit_now; + } + listenPort1 = PR_ntohs(addr.inet.port); + optval.option = PR_SockOpt_Nonblocking; + optval.value.non_blocking = PR_TRUE; + PR_SetSocketOption(listenSock1, &optval); + if (PR_Listen(listenSock1, 5) == PR_FAILURE) { + fprintf(stderr, "Can't listen on a socket\n"); + failed_already=1; + goto exit_now; + } + + if ((listenSock2 = PR_NewTCPSocket()) == NULL) { + fprintf(stderr, "Can't create a new TCP socket\n"); + failed_already=1; + goto exit_now; + } + addr.inet.family = PR_AF_INET; + addr.inet.ip = PR_htonl(PR_INADDR_ANY); + addr.inet.port = PR_htons(0); + if (PR_Bind(listenSock2, &addr) == PR_FAILURE) { + fprintf(stderr, "Can't bind socket\n"); + failed_already=1; + goto exit_now; + } + if (PR_GetSockName(listenSock2, &addr) == PR_FAILURE) { + fprintf(stderr, "PR_GetSockName failed\n"); + failed_already=1; + goto exit_now; + } + listenPort2 = PR_ntohs(addr.inet.port); + PR_SetSocketOption(listenSock2, &optval); + if (PR_Listen(listenSock2, 5) == PR_FAILURE) { + fprintf(stderr, "Can't listen on a socket\n"); + failed_already=1; + goto exit_now; + } + PR_snprintf(buf, sizeof(buf), + "The server thread is listening on ports %hu and %hu\n\n", + listenPort1, listenPort2); + if (debug_mode) printf("%s", buf); + + /* Set up the poll descriptor array */ + pds = pds0; + other_pds = pds1; + memset(pds, 0, sizeof(pds)); + pds[0].fd = listenSock1; + pds[0].in_flags = PR_POLL_READ; + pds[1].fd = listenSock2; + pds[1].in_flags = PR_POLL_READ; + /* Add some unused entries to test if they are ignored by PR_Poll() */ + memset(&pds[2], 0, sizeof(pds[2])); + memset(&pds[3], 0, sizeof(pds[3])); + memset(&pds[4], 0, sizeof(pds[4])); + npds = 5; + + clientThread = PR_CreateThread(PR_USER_THREAD, + clientThreadFunc, (void *) listenPort1, + PR_PRIORITY_NORMAL, PR_LOCAL_THREAD, + PR_UNJOINABLE_THREAD, 0); + if (clientThread == NULL) { + fprintf(stderr, "can't create thread\n"); + failed_already=1; + goto exit_now; + } + + clientThread = PR_CreateThread(PR_USER_THREAD, + clientThreadFunc, (void *) listenPort2, + PR_PRIORITY_NORMAL, PR_LOCAL_THREAD, + PR_UNJOINABLE_THREAD, 0); + if (clientThread == NULL) { + fprintf(stderr, "can't create thread\n"); + failed_already=1; + goto exit_now; + } + + if (debug_mode) { + printf("Two client threads are created. Each of them will\n"); + printf("send data to one of the two ports the server is listening on.\n"); + printf("The data they send is the port number. Each of them send\n"); + printf("the data five times, so you should see ten lines below,\n"); + printf("interleaved in an arbitrary order.\n"); + } + + /* two clients, three events per iteration: accept, read, close */ + i = 0; + while (i < 2 * 3 * NUM_ITERATIONS) { + PRPollDesc *tmp; + int nextIndex; + int nEvents = 0; + + retVal = PR_Poll(pds, npds, PR_INTERVAL_NO_TIMEOUT); + PR_ASSERT(retVal != 0); /* no timeout */ + if (retVal == -1) { + fprintf(stderr, "PR_Poll failed\n"); + failed_already=1; + goto exit_now; + } + + nextIndex = 2; + /* the two listening sockets */ + for (j = 0; j < 2; j++) { + other_pds[j] = pds[j]; + PR_ASSERT((pds[j].out_flags & PR_POLL_WRITE) == 0 + && (pds[j].out_flags & PR_POLL_EXCEPT) == 0); + if (pds[j].out_flags & PR_POLL_READ) { + PRFileDesc *sock; + + nEvents++; + sock = PR_Accept(pds[j].fd, NULL, PR_INTERVAL_NO_TIMEOUT); + if (sock == NULL) { + fprintf(stderr, "PR_Accept() failed\n"); + failed_already=1; + goto exit_now; + } + other_pds[nextIndex].fd = sock; + other_pds[nextIndex].in_flags = PR_POLL_READ; + nextIndex++; + } else if (pds[j].out_flags & PR_POLL_ERR) { + fprintf(stderr, "PR_Poll() indicates that an fd has error\n"); + failed_already=1; + goto exit_now; + } else if (pds[j].out_flags & PR_POLL_NVAL) { + fprintf(stderr, "PR_Poll() indicates that fd %d is invalid\n", + PR_FileDesc2NativeHandle(pds[j].fd)); + failed_already=1; + goto exit_now; + } + } + + for (j = 2; j < npds; j++) { + if (NULL == pds[j].fd) { + /* + * Keep the unused entries in the poll descriptor array + * for testing purposes. + */ + other_pds[nextIndex] = pds[j]; + nextIndex++; + continue; + } + + PR_ASSERT((pds[j].out_flags & PR_POLL_WRITE) == 0 + && (pds[j].out_flags & PR_POLL_EXCEPT) == 0); + if (pds[j].out_flags & PR_POLL_READ) { + PRInt32 nAvail; + PRInt32 nRead; + + nEvents++; + nAvail = PR_Available(pds[j].fd); + nRead = PR_Read(pds[j].fd, buf, sizeof(buf)); + PR_ASSERT(nAvail == nRead); + if (nRead == -1) { + fprintf(stderr, "PR_Read() failed\n"); + failed_already=1; + goto exit_now; + } else if (nRead == 0) { + PR_Close(pds[j].fd); + continue; + } else { + /* Just to be safe */ + buf[127] = '\0'; + if (debug_mode) printf("The server received \"%s\" from a client\n", buf); + } + } else if (pds[j].out_flags & PR_POLL_ERR) { + fprintf(stderr, "PR_Poll() indicates that an fd has error\n"); + failed_already=1; + goto exit_now; + } else if (pds[j].out_flags & PR_POLL_NVAL) { + fprintf(stderr, "PR_Poll() indicates that an fd is invalid\n"); + failed_already=1; + goto exit_now; + } + other_pds[nextIndex] = pds[j]; + nextIndex++; + } + + PR_ASSERT(retVal == nEvents); + /* swap */ + tmp = pds; + pds = other_pds; + other_pds = tmp; + npds = nextIndex; + i += nEvents; + } + + if (debug_mode) printf("Tests passed\n"); + +exit_now: + + if (listenSock1) { + PR_Close(listenSock1); + } + if (listenSock2) { + PR_Close(listenSock2); + } + + PR_Cleanup(); + + if(failed_already) + return 1; + else + return 0; + +} |