diff options
Diffstat (limited to 'src/libs/xpcom18a4/nsprpub/pr/tests/servr_kk.c')
| -rw-r--r-- | src/libs/xpcom18a4/nsprpub/pr/tests/servr_kk.c | 613 |
1 files changed, 613 insertions, 0 deletions
diff --git a/src/libs/xpcom18a4/nsprpub/pr/tests/servr_kk.c b/src/libs/xpcom18a4/nsprpub/pr/tests/servr_kk.c new file mode 100644 index 00000000..a8fdf1df --- /dev/null +++ b/src/libs/xpcom18a4/nsprpub/pr/tests/servr_kk.c @@ -0,0 +1,613 @@ +/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */ +/* ***** BEGIN LICENSE BLOCK ***** + * Version: MPL 1.1/GPL 2.0/LGPL 2.1 + * + * The contents of this file are subject to the Mozilla Public License Version + * 1.1 (the "License"); you may not use this file except in compliance with + * the License. You may obtain a copy of the License at + * http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" basis, + * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License + * for the specific language governing rights and limitations under the + * License. + * + * The Original Code is the Netscape Portable Runtime (NSPR). + * + * The Initial Developer of the Original Code is + * Netscape Communications Corporation. + * Portions created by the Initial Developer are Copyright (C) 1998-2000 + * the Initial Developer. All Rights Reserved. + * + * Contributor(s): + * + * Alternatively, the contents of this file may be used under the terms of + * either the GNU General Public License Version 2 or later (the "GPL"), or + * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"), + * in which case the provisions of the GPL or the LGPL are applicable instead + * of those above. If you wish to allow use of your version of this file only + * under the terms of either the GPL or the LGPL, and not to allow others to + * use your version of this file under the terms of the MPL, indicate your + * decision by deleting the provisions above and replace them with the notice + * and other provisions required by the GPL or the LGPL. If you do not delete + * the provisions above, a recipient may use your version of this file under + * the terms of any one of the MPL, the GPL or the LGPL. + * + * ***** END LICENSE BLOCK ***** */ + +/*********************************************************************** +** +** This server simulates a server running in loopback mode. +** +** The idea is that a single server is created. The server initially creates +** a number of worker threads. Then, with the server running, a number of +** clients are created which start requesting service from the server. +** +** +** Modification History: +** 19-May-97 AGarcia- Converted the test to accomodate the debug_mode flag. +** The debug mode will print all of the printfs associated with this test. +** The regress mode will be the default mode. Since the regress tool limits +** the output to a one line status:PASS or FAIL,all of the printf statements +** have been handled with an if (debug_mode) statement. +** 04-June-97 AGarcia removed the Test_Result function. Regress tool has been updated to +** recognize the return code from tha main program. +***********************************************************************/ + +/*********************************************************************** +** Includes +***********************************************************************/ +/* Used to get the command line option */ +#include "plgetopt.h" + +#include "nspr.h" +#include "pprthred.h" + +#include <string.h> + +#define PORT 15004 +#define THREAD_STACKSIZE 0 + +static int _iterations = 1000; +static int _clients = 1; +static int _client_data = 250; +static int _server_data = (8*1024); + +static PRThreadScope ServerScope, ClientScope; + +#define SERVER "Server" +#define MAIN "Main" + +#define SERVER_STATE_STARTUP 0 +#define SERVER_STATE_READY 1 +#define SERVER_STATE_DYING 2 +#define SERVER_STATE_DEAD 4 +int ServerState; +PRLock *ServerStateCVLock; +PRCondVar *ServerStateCV; + +#ifdef DEBUGPRINTS +#define DPRINTF printf +#else +#define DPRINTF +#endif + +PRIntn failed_already=0; +PRIntn debug_mode; +static void do_work(void); + +/* --- Server state functions --------------------------------------------- */ +void +SetServerState(char *waiter, PRInt32 state) +{ + PR_Lock(ServerStateCVLock); + ServerState = state; + PR_NotifyCondVar(ServerStateCV); + + if (debug_mode) DPRINTF("\t%s changed state to %d\n", waiter, state); + + PR_Unlock(ServerStateCVLock); +} + +int +WaitServerState(char *waiter, PRInt32 state) +{ + PRInt32 rv; + + PR_Lock(ServerStateCVLock); + + if (debug_mode) DPRINTF("\t%s waiting for state %d\n", waiter, state); + + while(!(ServerState & state)) + PR_WaitCondVar(ServerStateCV, PR_INTERVAL_NO_TIMEOUT); + rv = ServerState; + + if (debug_mode) DPRINTF("\t%s resuming from wait for state %d; state now %d\n", + waiter, state, ServerState); + PR_Unlock(ServerStateCVLock); + + return rv; +} + +/* --- Server Functions ------------------------------------------- */ + +PRLock *workerThreadsLock; +PRInt32 workerThreads; +PRInt32 workerThreadsBusy; + +void +WorkerThreadFunc(void *_listenSock) +{ + PRFileDesc *listenSock = (PRFileDesc *)_listenSock; + PRInt32 bytesRead; + PRInt32 bytesWritten; + char *dataBuf; + char *sendBuf; + + if (debug_mode) DPRINTF("\tServer buffer is %d bytes; %d data, %d netaddrs\n", + _client_data+(2*sizeof(PRNetAddr))+32, _client_data, (2*sizeof(PRNetAddr))+32); + dataBuf = (char *)PR_MALLOC(_client_data + 2*sizeof(PRNetAddr) + 32); + if (!dataBuf) + if (debug_mode) printf("\tServer could not malloc space!?\n"); + sendBuf = (char *)PR_MALLOC(_server_data *sizeof(char)); + if (!sendBuf) + if (debug_mode) printf("\tServer could not malloc space!?\n"); + + if (debug_mode) DPRINTF("\tServer worker thread running\n"); + + while(1) { + PRInt32 bytesToRead = _client_data; + PRInt32 bytesToWrite = _server_data; + PRFileDesc *newSock; + PRNetAddr *rAddr; + PRInt32 loops = 0; + + loops++; + + if (debug_mode) DPRINTF("\tServer thread going into accept\n"); + + bytesRead = PR_AcceptRead(listenSock, + &newSock, + &rAddr, + dataBuf, + bytesToRead, + PR_INTERVAL_NO_TIMEOUT); + + if (bytesRead < 0) { + if (debug_mode) printf("\tServer error in accept (%d)\n", bytesRead); + continue; + } + + if (debug_mode) DPRINTF("\tServer accepted connection (%d bytes)\n", bytesRead); + + PR_AtomicIncrement(&workerThreadsBusy); + if (workerThreadsBusy == workerThreads) { + + PR_Lock(workerThreadsLock); + if (workerThreadsBusy == workerThreads) { + PRThread *WorkerThread; + + WorkerThread = PR_CreateThread( + PR_SYSTEM_THREAD, + WorkerThreadFunc, + listenSock, + PR_PRIORITY_NORMAL, + ServerScope, + PR_UNJOINABLE_THREAD, + THREAD_STACKSIZE); + + if (!WorkerThread) + if (debug_mode) printf("Error creating client thread %d\n", workerThreads); + else { + PR_AtomicIncrement(&workerThreads); + if (debug_mode) DPRINTF("\tServer creates worker (%d)\n", workerThreads); + } + } + PR_Unlock(workerThreadsLock); + } + + bytesToRead -= bytesRead; + while (bytesToRead) { + bytesRead = PR_Recv(newSock, + dataBuf, + bytesToRead, + 0, + PR_INTERVAL_NO_TIMEOUT); + if (bytesRead < 0) { + if (debug_mode) printf("\tServer error receiving data (%d)\n", bytesRead); + continue; + } + if (debug_mode) DPRINTF("\tServer received %d bytes\n", bytesRead); + } + + bytesWritten = PR_Send(newSock, + sendBuf, + bytesToWrite, + 0, + PR_INTERVAL_NO_TIMEOUT); + if (bytesWritten != _server_data) + if (debug_mode) printf("\tError sending data to client (%d, %d)\n", + bytesWritten, PR_GetOSError()); + else + if (debug_mode) DPRINTF("\tServer sent %d bytes\n", bytesWritten); + + PR_Close(newSock); + PR_AtomicDecrement(&workerThreadsBusy); + } +} + +PRFileDesc * +ServerSetup(void) +{ + PRFileDesc *listenSocket; + PRSocketOptionData sockOpt; + PRNetAddr serverAddr; + PRThread *WorkerThread; + + if ( (listenSocket = PR_NewTCPSocket()) == NULL) { + if (debug_mode) printf("\tServer error creating listen socket\n"); + else failed_already=1; + return NULL; + } + + sockOpt.option = PR_SockOpt_Reuseaddr; + sockOpt.value.reuse_addr = PR_TRUE; + if ( PR_SetSocketOption(listenSocket, &sockOpt) == PR_FAILURE) { + if (debug_mode) printf("\tServer error setting socket option: OS error %d\n", + PR_GetOSError()); + else failed_already=1; + PR_Close(listenSocket); + return NULL; + } + + memset(&serverAddr, 0, sizeof(PRNetAddr)); + serverAddr.inet.family = PR_AF_INET; + serverAddr.inet.port = PR_htons(PORT); + serverAddr.inet.ip = PR_htonl(PR_INADDR_ANY); + + if ( PR_Bind(listenSocket, &serverAddr) == PR_FAILURE) { + if (debug_mode) printf("\tServer error binding to server address: OS error %d\n", + PR_GetOSError()); + else failed_already=1; + PR_Close(listenSocket); + return NULL; + } + + if ( PR_Listen(listenSocket, 128) == PR_FAILURE) { + if (debug_mode) printf("\tServer error listening to server socket\n"); + else failed_already=1; + PR_Close(listenSocket); + + return NULL; + } + + /* Create Clients */ + workerThreads = 0; + workerThreadsBusy = 0; + + workerThreadsLock = PR_NewLock(); + + WorkerThread = PR_CreateThread( + PR_SYSTEM_THREAD, + WorkerThreadFunc, + listenSocket, + PR_PRIORITY_NORMAL, + ServerScope, + PR_UNJOINABLE_THREAD, + THREAD_STACKSIZE); + + if (!WorkerThread) { + if (debug_mode) printf("error creating working thread\n"); + PR_Close(listenSocket); + return NULL; + } + PR_AtomicIncrement(&workerThreads); + if (debug_mode) DPRINTF("\tServer created primordial worker thread\n"); + + return listenSocket; +} + +/* The main server loop */ +void +ServerThreadFunc(void *unused) +{ + PRFileDesc *listenSocket; + + /* Do setup */ + listenSocket = ServerSetup(); + + if (!listenSocket) { + SetServerState(SERVER, SERVER_STATE_DEAD); + } else { + + if (debug_mode) DPRINTF("\tServer up\n"); + + /* Tell clients they can start now. */ + SetServerState(SERVER, SERVER_STATE_READY); + + /* Now wait for server death signal */ + WaitServerState(SERVER, SERVER_STATE_DYING); + + /* Cleanup */ + SetServerState(SERVER, SERVER_STATE_DEAD); + } +} + +/* --- Client Functions ------------------------------------------- */ + +PRInt32 numRequests; +PRInt32 numClients; +PRMonitor *clientMonitor; + +void +ClientThreadFunc(void *unused) +{ + PRNetAddr serverAddr; + PRFileDesc *clientSocket; + char *sendBuf; + char *recvBuf; + PRInt32 rv; + PRInt32 bytesNeeded; + + sendBuf = (char *)PR_MALLOC(_client_data * sizeof(char)); + if (!sendBuf) + if (debug_mode) printf("\tClient could not malloc space!?\n"); + recvBuf = (char *)PR_MALLOC(_server_data * sizeof(char)); + if (!recvBuf) + if (debug_mode) printf("\tClient could not malloc space!?\n"); + + memset(&serverAddr, 0, sizeof(PRNetAddr)); + serverAddr.inet.family = PR_AF_INET; + serverAddr.inet.port = PR_htons(PORT); + serverAddr.inet.ip = PR_htonl(PR_INADDR_LOOPBACK); + + while(numRequests > 0) { + + if ( (numRequests % 10) == 0 ) + if (debug_mode) printf("."); + if (debug_mode) DPRINTF("\tClient starting request %d\n", numRequests); + + clientSocket = PR_NewTCPSocket(); + if (!clientSocket) { + if (debug_mode) printf("Client error creating socket: OS error %d\n", + PR_GetOSError()); + continue; + } + + if (debug_mode) DPRINTF("\tClient connecting\n"); + + rv = PR_Connect(clientSocket, + &serverAddr, + PR_INTERVAL_NO_TIMEOUT); + if (!clientSocket) { + if (debug_mode) printf("\tClient error connecting\n"); + continue; + } + + if (debug_mode) DPRINTF("\tClient connected\n"); + + rv = PR_Send(clientSocket, + sendBuf, + _client_data, + 0, + PR_INTERVAL_NO_TIMEOUT); + if (rv != _client_data) { + if (debug_mode) printf("Client error sending data (%d)\n", rv); + PR_Close(clientSocket); + continue; + } + + if (debug_mode) DPRINTF("\tClient sent %d bytes\n", rv); + + bytesNeeded = _server_data; + while(bytesNeeded) { + rv = PR_Recv(clientSocket, + recvBuf, + bytesNeeded, + 0, + PR_INTERVAL_NO_TIMEOUT); + if (rv <= 0) { + if (debug_mode) printf("Client error receiving data (%d) (%d/%d)\n", + rv, (_server_data - bytesNeeded), _server_data); + break; + } + if (debug_mode) DPRINTF("\tClient received %d bytes; need %d more\n", rv, bytesNeeded - rv); + bytesNeeded -= rv; + } + + PR_Close(clientSocket); + + PR_AtomicDecrement(&numRequests); + } + + PR_EnterMonitor(clientMonitor); + --numClients; + PR_Notify(clientMonitor); + PR_ExitMonitor(clientMonitor); + + PR_DELETE(sendBuf); + PR_DELETE(recvBuf); +} + +void +RunClients(void) +{ + PRInt32 index; + + numRequests = _iterations; + numClients = _clients; + clientMonitor = PR_NewMonitor(); + + for (index=0; index<_clients; index++) { + PRThread *clientThread; + + + clientThread = PR_CreateThread( + PR_USER_THREAD, + ClientThreadFunc, + NULL, + PR_PRIORITY_NORMAL, + ClientScope, + PR_UNJOINABLE_THREAD, + THREAD_STACKSIZE); + + if (!clientThread) { + if (debug_mode) printf("\terror creating client thread %d\n", index); + } else + if (debug_mode) DPRINTF("\tMain created client %d/%d\n", index+1, _clients); + + } + + PR_EnterMonitor(clientMonitor); + while(numClients) + PR_Wait(clientMonitor, PR_INTERVAL_NO_TIMEOUT); + PR_ExitMonitor(clientMonitor); +} + +/* --- Main Function ---------------------------------------------- */ + +static +void do_work() +{ + PRThread *ServerThread; + PRInt32 state; + + SetServerState(MAIN, SERVER_STATE_STARTUP); + ServerThread = PR_CreateThread( + PR_USER_THREAD, + ServerThreadFunc, + NULL, + PR_PRIORITY_NORMAL, + ServerScope, + PR_JOINABLE_THREAD, + THREAD_STACKSIZE); + if (!ServerThread) { + if (debug_mode) printf("error creating main server thread\n"); + return; + } + + /* Wait for server to be ready */ + state = WaitServerState(MAIN, SERVER_STATE_READY|SERVER_STATE_DEAD); + + if (!(state & SERVER_STATE_DEAD)) { + /* Run Test Clients */ + RunClients(); + + /* Send death signal to server */ + SetServerState(MAIN, SERVER_STATE_DYING); + } + + PR_JoinThread(ServerThread); +} + +static void do_workUU(void) +{ + ServerScope = PR_LOCAL_THREAD; + ClientScope = PR_LOCAL_THREAD; + do_work(); +} + +static void do_workUK(void) +{ + ServerScope = PR_LOCAL_THREAD; + ClientScope = PR_GLOBAL_THREAD; + do_work(); +} + +static void do_workKU(void) +{ + ServerScope = PR_GLOBAL_THREAD; + ClientScope = PR_LOCAL_THREAD; + do_work(); +} + +static void do_workKK(void) +{ + ServerScope = PR_GLOBAL_THREAD; + ClientScope = PR_GLOBAL_THREAD; + do_work(); +} + + +static void Measure(void (*func)(void), const char *msg) +{ + PRIntervalTime start, stop; + double d; + + start = PR_IntervalNow(); + (*func)(); + stop = PR_IntervalNow(); + + d = (double)PR_IntervalToMicroseconds(stop - start); + + if (debug_mode) printf("\n%40s: %6.2f usec\n", msg, d / _iterations); +} + + +int main(int argc, char **argv) +{ + /* The command line argument: -d is used to determine if the test is being run + in debug mode. The regress tool requires only one line output:PASS or FAIL. + All of the printfs associated with this test has been handled with a if (debug_mode) + test. + Usage: test_name -d + */ + PLOptStatus os; + PLOptState *opt = PL_CreateOptState(argc, argv, "d:"); + while (PL_OPT_EOL != (os = PL_GetNextOpt(opt))) + { + if (PL_OPT_BAD == os) continue; + switch (opt->option) + { + case 'd': /* debug mode */ + debug_mode = 1; + break; + default: + break; + } + } + PL_DestroyOptState(opt); + + /* main test */ + if (debug_mode) { + printf("Enter number of iterations: \n"); + scanf("%d", &_iterations); + printf("Enter number of clients : \n"); + scanf("%d", &_clients); + printf("Enter size of client data : \n"); + scanf("%d", &_client_data); + printf("Enter size of server data : \n"); + scanf("%d", &_server_data); + } + else { + _iterations = 7; + _clients = 7; + _client_data = 100; + _server_data = 100; + } + + if (debug_mode) { + printf("\n\n%d iterations with %d client threads.\n", + _iterations, _clients); + printf("Sending %d bytes of client data and %d bytes of server data\n", + _client_data, _server_data); + } + PR_Init(PR_USER_THREAD, PR_PRIORITY_NORMAL, 0); + PR_STDIO_INIT(); + + PR_SetThreadRecycleMode(64); + + ServerStateCVLock = PR_NewLock(); + ServerStateCV = PR_NewCondVar(ServerStateCVLock); + + + Measure(do_workKK, "server loop kernel/kernel"); + + PR_Cleanup(); + + if(failed_already) + return 1; + else + return 0; + +} |