diff options
Diffstat (limited to 'ansible_collections/cisco/meraki/CHANGELOG.rst')
| -rw-r--r-- | ansible_collections/cisco/meraki/CHANGELOG.rst | 356 |
1 files changed, 356 insertions, 0 deletions
diff --git a/ansible_collections/cisco/meraki/CHANGELOG.rst b/ansible_collections/cisco/meraki/CHANGELOG.rst new file mode 100644 index 00000000..2aed51c0 --- /dev/null +++ b/ansible_collections/cisco/meraki/CHANGELOG.rst @@ -0,0 +1,356 @@ +========================== +Cisco.Meraki Release Notes +========================== + +.. contents:: Topics + + +v2.15.1 +======= + +Bugfixes +-------- + +- Corrects constraints applied to local and remote status page settings to align with API behaviour (https://github.com/CiscoDevNet/ansible-meraki/issues/437) +- Enables meraki_network query by net_id (https://github.com/CiscoDevNet/ansible-meraki/issues/441) +- Resolved an issue where an empty response from the API triggered an exception in module meraki_webhook (https://github.com/CiscoDevNet/ansible-meraki/issues/433) +- Resolves issues with meraki_webhook shared_secret defaulting to null; (https://github.com/CiscoDevNet/ansible-meraki/issues/439); Also adds Test Coverage for shared secret idempotency and resolves test file lint issues. + +v2.15.0 +======= + +Minor Changes +------------- + +- New module - meraki_network_settings - Configure detailed settings of a network. + +Bugfixes +-------- + +- Resolved issue +- Update pipeline to use newer version of action to detect changed files. +- meraki_alert - Fix situation where specifying emails may crash. +- meraki_mx_site_to_site_vpn - Check mode should no longer apply changes when enabled. + +Known Issues +------------ + +- meraki_network - Updated documentation for `local_status_page_enabled` and `remote_status_page_enabled` as these no longer work. + +v2.14.0 +======= + +Minor Changes +------------- + +- meraki_webhook - Add payload template parameter + +Bugfixes +-------- + +- Fix checkmode on merak webhook payload template update +- meraki_webhook - First error when updating URL in a webhook + +v2.13.0 +======= + +Major Changes +------------- + +- meraki_mr_l7_firewall - New module + +v2.12.0 +======= + +Major Changes +------------- + +- meraki_webhook_payload_template - New module + +Bugfixes +-------- + +- Update defaults in documentation for new sanity tests +- meraki_device - Fix URL for LLDP and CDP lookups + +v2.11.0 +======= + +Minor Changes +------------- + +- Add GPLv3 license. Always was GPLv3, but didn't have the file. +- Change shebang in Sublime utils to point to env instead of direct to the path +- meraki_alert - Change type for opbject to alert_type in examples +- meraki_ms_access_policies - New module to create, delete, update Access Policies in the Switch settings +- meraki_ssid - Add support for `ap_availability_tags`. +- meraki_ssid - Add support for `available_on_all_aps` +- meraki_ssid - Add support for `lan_isolation_enabled`. +- meraki_ssid - Add support for `visible`. + +v2.10.1 +======= + +Minor Changes +------------- + +- Change shebang in Sublime utils to point to env instead of direct to the path + +v2.10.0 +======= + +Minor Changes +------------- + +- meraki_network - Add support for `copy_from_network_id`. + +v2.9.0 +====== + +Bugfixes +-------- + +- meraki_switchport - Setting VLAN to 0 on trunk port clears the VLAN. + +v2.8.0 +====== + +Minor Changes +------------- + +- meraki_action_batch - New module for CRUD operations on Meraki Action Batches +- meraki_switchport - Add support for flexible stacking + +v2.7.0 +====== + +Minor Changes +------------- + +- meraki_mx_network_vlan_settings - New module to enable or disable VLANs on a network +- meraki_mx_third_party_vpn_peers - New module for managing third party VPM peers + +Bugfixes +-------- + +- meraki_mx_static_route - Add support for gateway_vlan_id otherwise requests could error + +v2.6.2 +====== + +Minor Changes +------------- + +- Add execution-environment.yml in meta as the base to a Meraki ee +- meraki_network - Add Products to net_type list + +Bugfixes +-------- + +- meraki_alert - Updates now properly set default destination webhook +- meraki_syslog - Fix crash due to incorrect dictionary reference + +v2.6.1 +====== + +Minor Changes +------------- + +- meraki_ssid - Add support for enterprise_admin_access and splash_guest_sponsor_domains with the latter required for creating a sponsor portal. + +Bugfixes +-------- + +- meraki_mr_rf_profile - Fix issue with idempotency and creation of RF Profiles by name only +- meraki_syslog - Improve reliability for multiple roles or capitalization. + +v2.6.0 +====== + +Major Changes +------------- + +- meraki_mr_radio - New module + +Minor Changes +------------- + +- meraki_mx_l7_firewall - Allow passing an empty ruleset to delete all rules +- meraki_utils - Add debugging output for failed socket connections + +Bugfixes +-------- + +- meraki_mr_ssid - Fix issue with SSID removal idempotency when ID doesn't exist + +v2.5.0 +====== + +Minor Changes +------------- + +- meraki_mr_l3_firewall - Return each MR L3 firewall rule's values in lowercase. +- meraki_mr_ssid - Add support for radius_proxy_enabled SSID setting. +- meraki_mx_l3_firewall - Return each MX L3 firewall rule's values in lowercase. +- meraki_mx_vlan - Fix dhcp_boot_options_enabled parameter + +v2.4.2 +====== + +Bugfixes +-------- + +- Fix some flake8 sanity errors as reported by Ansible Galaxy. Should be no functional change. + +v2.4.0 +====== + +Minor Changes +------------- + +- meraki_mx_switchport - Improve documentation for response + +Bugfixes +-------- + +- Allow a state of absent in voice vlan to allow the value to be nulled out(https://github.com/CiscoDevNet/ansible-meraki/issues/238) + +v2.3.1 +====== + +Bugfixes +-------- + +- meraki_ms_switchport - link_negotiation choice for 100 Megabit Auto is incorrect causing failures. (https://github.com/CiscoDevNet/ansible-meraki/issues/235). + +v2.3.0 +====== + +Minor Changes +------------- + +- meraki_ms_switchport - Adding additional functionality to support the access_policy_types "MAC allow list" and "Sticky MAC allow list" port security configuration options. (https://github.com/CiscoDevNet/ansible-meraki/issues/227). +- meraki_mx_intrusion_prevention - Rename message to rule_message to avoid conflicts with internal Ansible variables. + +Bugfixes +-------- + +- meraki_ms_switchport - access_policy_types choices are incorrect causing failures. (https://github.com/CiscoDevNet/ansible-meraki/issues/227). + +v2.2.1 +====== + +Bugfixes +-------- + +- meraki_mx_content_filtering - Fix crash with idempotent condition due to improper sorting + +v2.2.0 +====== + +Minor Changes +------------- + +- meraki_network - Update documentation to show querying of local or remote settings. +- meraki_ssid - Add Cisco ISE as a splash page option. + +Bugfixes +-------- + +- meraki_network - Fix bug where local or remote settings always show changed. + +v2.1.3 +====== + +Bugfixes +-------- + +- meraki_device - Support pagination. This allows for more than 1,000 devices to be listed at a time. +- meraki_network - Support pagination. This allows for more than 1,000 networks to be listed at a time. + +v2.1.2 +====== + +Bugfixes +-------- + +- Remove test output as it made the collection, and Ansible, huge. + +v2.1.1 +====== + +Bugfixes +-------- + +- meraki_management_interface - Fix crash when modifying a non-MX management interface. + +v2.1.0 +====== + +New Modules +----------- + +- meraki_alert - Manage alerts in the Meraki cloud +- meraki_mx_l2_interface - Configure MX layer 2 interfaces + +v2.0.0 +====== + +Major Changes +------------- + +- Rewrite requests method for version 1.0 API and improved readability +- meraki_mr_rf_profile - Configure wireless RF profiles. +- meraki_mr_settings - Configure network settings for wireless. +- meraki_ms_l3_interface - New module +- meraki_ms_ospf - Configure OSPF. + +Minor Changes +------------- + +- meraki - Add optional debugging for is_update_required() method. +- meraki_admin - Update endpoints for API v1 +- meraki_alert - Manage network wide alert settings. +- meraki_device - Added query parameter +- meraki_intrusion_prevention - Change documentation to show proper way to clear rules +- meraki_malware - Update documentation to show how to allow multiple URLs at once. +- meraki_mx_l2_interface - Configure physical interfaces on MX appliances. +- meraki_mx_uplink - Renamed to meraki_mx_uplink_bandwidth +- meraki_ssid - Add `WPA3 Only` and `WPA3 Transition Mode` +- meraki_switchport - Add support for `access_policy_type` parameter + +Breaking Changes / Porting Guide +-------------------------------- + +- meraki_device - Changed tags from string to list +- meraki_device - Removed serial_lldp_cdp parameter +- meraki_device - Removed serial_uplink parameter +- meraki_intrusion_prevention - Rename whitedlisted_rules to allowed_rules +- meraki_mx_l3_firewall - Rule responses are now in a `rules` list +- meraki_mx_l7_firewall - Rename blacklisted_countries to blocked_countries +- meraki_mx_l7_firewall - Rename whitelisted_countries to allowed_countries +- meraki_network - Local and remote status page settings cannot be set during network creation +- meraki_network - `disableRemoteStatusPage` response is now `remote_status_page_enabled` +- meraki_network - `disable_my_meraki_com` response is now `local_status_page_enabled` +- meraki_network - `disable_my_meraki` has been deprecated +- meraki_network - `enable_my_meraki` is now called `local_status_page_enabled` +- meraki_network - `enable_remote_status_page` is now called `remote_status_page_enabled` +- meraki_network - `enabled` response for VLAN status is now `vlans_enabled` +- meraki_network - `tags` and `type` now return a list +- meraki_snmp - peer_ips is now a list +- meraki_switchport - `access_policy_number` is now an int and not a string +- meraki_switchport - `tags` is now a list and not a string +- meraki_webhook - Querying test status now uses state of query. + +Security Fixes +-------------- + +- meraki_webhook - diff output may show data for values set to not display + +Bugfixes +-------- + +- Remove unnecessary files from the collection package, significantly reduces package size +- meraki_admin - Fix error when adding network privileges to admin using network name +- meraki_switch_stack - Fix situation where module may crash due to switch being in or not in a stack already +- meraki_webhook - Proper response is shown when creating webhook test |