Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 187 insertions, 0 deletions

diff --git a/drivers/nxp/tzc/plat_tzc400.c b/drivers/nxp/tzc/plat_tzc400.c
new file mode 100644
index 0000000..4fe5221
--- /dev/null
+++ b/drivers/nxp/tzc/plat_tzc400.c
@@ -0,0 +1,187 @@
+/*
+ * Copyright 2021 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#include <common/debug.h>
+
+#include <plat_tzc400.h>
+
+#pragma weak populate_tzc400_reg_list
+
+#ifdef DEFAULT_TZASC_CONFIG
+/*
+ * Typical Memory map of DRAM0
+ *    |-----------NXP_NS_DRAM_ADDR ( = NXP_DRAM0_ADDR)----------|
+ *    |								|
+ *    |								|
+ *    |			Non-SECURE REGION			|
+ *    |								|
+ *    |								|
+ *    |								|
+ *    |------- (NXP_NS_DRAM_ADDR + NXP_NS_DRAM_SIZE - 1) -------|
+ *    |-----------------NXP_SECURE_DRAM_ADDR--------------------|
+ *    |								|
+ *    |								|
+ *    |								|
+ *    |			SECURE REGION (= 64MB)			|
+ *    |								|
+ *    |								|
+ *    |								|
+ *    |--- (NXP_SECURE_DRAM_ADDR + NXP_SECURE_DRAM_SIZE - 1)----|
+ *    |-----------------NXP_SP_SHRD_DRAM_ADDR-------------------|
+ *    |								|
+ *    |	       Secure EL1 Payload SHARED REGION (= 2MB)         |
+ *    |								|
+ *    |-----------(NXP_DRAM0_ADDR + NXP_DRAM0_SIZE - 1)---------|
+ *
+ *
+ *
+ * Typical Memory map of DRAM1
+ *    |---------------------NXP_DRAM1_ADDR----------------------|
+ *    |								|
+ *    |								|
+ *    |			Non-SECURE REGION			|
+ *    |								|
+ *    |								|
+ *    |---(NXP_DRAM1_ADDR + Dynamically calculated Size - 1) ---|
+ *
+ *
+ * Typical Memory map of DRAM2
+ *    |---------------------NXP_DRAM2_ADDR----------------------|
+ *    |								|
+ *    |								|
+ *    |			Non-SECURE REGION			|
+ *    |								|
+ *    |								|
+ *    |---(NXP_DRAM2_ADDR + Dynamically calculated Size - 1) ---|
+ */
+
+/*****************************************************************************
+ * This function sets up access permissions on memory regions
+ *
+ * Input:
+ *	tzc400_reg_list	: TZC400 Region List
+ *	dram_idx	: DRAM index
+ *	list_idx	: TZC400 Region List Index
+ *	dram_start_addr	: Start address of DRAM at dram_idx.
+ *	dram_size	: Size of DRAM at dram_idx.
+ *	secure_dram_sz	: Secure DRAM Size
+ *	shrd_dram_sz	: Shared DRAM Size
+ *
+ * Out:
+ *	list_idx	: last populated index + 1
+ *
+ ****************************************************************************/
+int populate_tzc400_reg_list(struct tzc400_reg *tzc400_reg_list,
+			     int dram_idx, int list_idx,
+			     uint64_t dram_start_addr,
+			     uint64_t dram_size,
+			     uint32_t secure_dram_sz,
+			     uint32_t shrd_dram_sz)
+{
+	if (list_idx == 0) {
+		/* No need to configure TZC Region 0 in this list.
+		 */
+		list_idx++;
+	}
+	/* Continue with list entries for index > 0 */
+	if (dram_idx == 0) {
+		/* TZC Region 1 on DRAM0 for Secure Memory*/
+		tzc400_reg_list[list_idx].reg_filter_en = 1;
+		tzc400_reg_list[list_idx].start_addr = dram_start_addr + dram_size;
+		tzc400_reg_list[list_idx].end_addr = dram_start_addr + dram_size
+						+ secure_dram_sz - 1;
+		tzc400_reg_list[list_idx].sec_attr = TZC_REGION_S_RDWR;
+		tzc400_reg_list[list_idx].nsaid_permissions = TZC_REGION_NS_NONE;
+		list_idx++;
+
+		/* TZC Region 2 on DRAM0 for Shared Memory*/
+		tzc400_reg_list[list_idx].reg_filter_en = 1;
+		tzc400_reg_list[list_idx].start_addr = dram_start_addr + dram_size
+							+ secure_dram_sz;
+		tzc400_reg_list[list_idx].end_addr = dram_start_addr + dram_size
+							+ secure_dram_sz
+							+ shrd_dram_sz
+							- 1;
+		tzc400_reg_list[list_idx].sec_attr = TZC_REGION_S_RDWR;
+		tzc400_reg_list[list_idx].nsaid_permissions = TZC_NS_ACCESS_ID;
+		list_idx++;
+
+		/* TZC Region 3 on DRAM0 for Non-Secure Memory*/
+		tzc400_reg_list[list_idx].reg_filter_en = 1;
+		tzc400_reg_list[list_idx].start_addr = dram_start_addr;
+		tzc400_reg_list[list_idx].end_addr = dram_start_addr + dram_size
+							- 1;
+		tzc400_reg_list[list_idx].sec_attr = TZC_REGION_S_RDWR;
+		tzc400_reg_list[list_idx].nsaid_permissions = TZC_NS_ACCESS_ID;
+		list_idx++;
+	} else {
+		/* TZC Region 3+i on DRAM(> 0) for Non-Secure Memory*/
+		tzc400_reg_list[list_idx].reg_filter_en = 1;
+		tzc400_reg_list[list_idx].start_addr = dram_start_addr;
+		tzc400_reg_list[list_idx].end_addr = dram_start_addr + dram_size
+							- 1;
+		tzc400_reg_list[list_idx].sec_attr = TZC_REGION_S_RDWR;
+		tzc400_reg_list[list_idx].nsaid_permissions = TZC_NS_ACCESS_ID;
+		list_idx++;
+	}
+
+	return list_idx;
+}
+#else
+int populate_tzc400_reg_list(struct tzc400_reg *tzc400_reg_list,
+			     int dram_idx, int list_idx,
+			     uint64_t dram_start_addr,
+			     uint64_t dram_size,
+			     uint32_t secure_dram_sz,
+			     uint32_t shrd_dram_sz)
+{
+	ERROR("tzc400_reg_list used is not a default list\n");
+	ERROR("%s needs to be over-written.\n", __func__);
+	return 0;
+}
+#endif	/* DEFAULT_TZASC_CONFIG */
+
+/*******************************************************************************
+ * Configure memory access permissions
+ *   - Region 0 with no access;
+ *   - Region 1 to 4 as per the tzc400_reg_list populated by
+ *     function populate_tzc400_reg_list() with default for all the SoC.
+ ******************************************************************************/
+void mem_access_setup(uintptr_t base, uint32_t total_regions,
+		      struct tzc400_reg *tzc400_reg_list)
+{
+	uint32_t list_indx = 0U;
+
+	INFO("Configuring TrustZone Controller\n");
+
+	tzc400_init(base);
+
+	/* Disable filters. */
+	tzc400_disable_filters();
+
+	/* Region 0 set to no access by default */
+	tzc400_configure_region0(TZC_REGION_S_NONE, 0U);
+
+	for (list_indx = 1U; list_indx < total_regions; list_indx++) {
+		tzc400_configure_region(
+			tzc400_reg_list[list_indx].reg_filter_en,
+			list_indx,
+			tzc400_reg_list[list_indx].start_addr,
+			tzc400_reg_list[list_indx].end_addr,
+			tzc400_reg_list[list_indx].sec_attr,
+			tzc400_reg_list[list_indx].nsaid_permissions);
+	}
+
+	/*
+	 * Raise an exception if a NS device tries to access secure memory
+	 * TODO: Add interrupt handling support.
+	 */
+	tzc400_set_action(TZC_ACTION_ERR);
+
+	/* Enable filters. */
+	tzc400_enable_filters();
+}