Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

57 files changed, 5608 insertions, 0 deletions

diff --git a/plat/arm/board/fvp/aarch32/fvp_helpers.S b/plat/arm/board/fvp/aarch32/fvp_helpers.S
new file mode 100644
index 0000000..9985c1d
--- /dev/null
+++ b/plat/arm/board/fvp/aarch32/fvp_helpers.S
@@ -0,0 +1,143 @@
+/*
+ * Copyright (c) 2016-2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <drivers/arm/fvp/fvp_pwrc.h>
+#include <platform_def.h>
+
+	.globl	plat_secondary_cold_boot_setup
+	.globl	plat_get_my_entrypoint
+	.globl	plat_is_my_cpu_primary
+	.globl	plat_arm_calc_core_pos
+
+	/* --------------------------------------------------------------------
+	 * void plat_secondary_cold_boot_setup (void);
+	 *
+	 * For AArch32, cold-booting secondary CPUs is not yet
+	 * implemented and they panic.
+	 * --------------------------------------------------------------------
+	 */
+func plat_secondary_cold_boot_setup
+cb_panic:
+	b	cb_panic
+endfunc plat_secondary_cold_boot_setup
+
+	/* ---------------------------------------------------------------------
+	 * unsigned long plat_get_my_entrypoint (void);
+	 *
+	 * Main job of this routine is to distinguish between a cold and warm
+	 * boot. On FVP, this information can be queried from the power
+	 * controller. The Power Control SYS Status Register (PSYSR) indicates
+	 * the wake-up reason for the CPU.
+	 *
+	 * For a cold boot, return 0.
+	 * For a warm boot, read the mailbox and return the address it contains.
+	 *
+	 * TODO: PSYSR is a common register and should be
+	 * 	accessed using locks. Since it is not possible
+	 * 	to use locks immediately after a cold reset
+	 * 	we are relying on the fact that after a cold
+	 * 	reset all cpus will read the same WK field
+	 * ---------------------------------------------------------------------
+	 */
+func plat_get_my_entrypoint
+	/* ---------------------------------------------------------------------
+	 * When bit PSYSR.WK indicates either "Wake by PPONR" or "Wake by GIC
+	 * WakeRequest signal" then it is a warm boot.
+	 * ---------------------------------------------------------------------
+	 */
+	ldcopr	r2, MPIDR
+	ldr	r1, =PWRC_BASE
+	str	r2, [r1, #PSYSR_OFF]
+	ldr	r2, [r1, #PSYSR_OFF]
+	ubfx	r2, r2, #PSYSR_WK_SHIFT, #PSYSR_WK_WIDTH
+	cmp	r2, #WKUP_PPONR
+	beq	warm_reset
+	cmp	r2, #WKUP_GICREQ
+	beq	warm_reset
+
+	/* Cold reset */
+	mov	r0, #0
+	bx	lr
+
+warm_reset:
+	/* ---------------------------------------------------------------------
+	 * A mailbox is maintained in the trusted SRAM. It is flushed out of the
+	 * caches after every update using normal memory so it is safe to read
+	 * it here with SO attributes.
+	 * ---------------------------------------------------------------------
+	 */
+	ldr	r0, =PLAT_ARM_TRUSTED_MAILBOX_BASE
+	ldr	r0, [r0]
+	cmp	r0, #0
+	beq	_panic
+	bx	lr
+
+	/* ---------------------------------------------------------------------
+	 * The power controller indicates this is a warm reset but the mailbox
+	 * is empty. This should never happen!
+	 * ---------------------------------------------------------------------
+	 */
+_panic:
+	b	_panic
+endfunc plat_get_my_entrypoint
+
+	/* -----------------------------------------------------
+	 * unsigned int plat_is_my_cpu_primary (void);
+	 *
+	 * Find out whether the current cpu is the primary
+	 * cpu.
+	 * -----------------------------------------------------
+	 */
+func plat_is_my_cpu_primary
+	ldcopr	r0, MPIDR
+	ldr	r1, =MPIDR_AFFINITY_MASK
+	and	r0, r1
+	cmp	r0, #FVP_PRIMARY_CPU
+	moveq	r0, #1
+	movne	r0, #0
+	bx	lr
+endfunc plat_is_my_cpu_primary
+
+	/* ---------------------------------------------------------------------
+	 * unsigned int plat_arm_calc_core_pos(u_register_t mpidr)
+	 *
+	 * Function to calculate the core position on FVP.
+	 *
+	 * (ClusterId * FVP_MAX_CPUS_PER_CLUSTER * FVP_MAX_PE_PER_CPU) +
+	 * (CPUId * FVP_MAX_PE_PER_CPU) +
+	 * ThreadId
+	 *
+	 * which can be simplified as:
+	 *
+	 * ((ClusterId * FVP_MAX_CPUS_PER_CLUSTER + CPUId) * FVP_MAX_PE_PER_CPU)
+	 * + ThreadId
+	 * ---------------------------------------------------------------------
+	 */
+func plat_arm_calc_core_pos
+	mov	r3, r0
+
+	/*
+	 * Check for MT bit in MPIDR. If not set, shift MPIDR to left to make it
+	 * look as if in a multi-threaded implementation
+	 */
+	tst	r0, #MPIDR_MT_MASK
+	lsleq	r3, r0, #MPIDR_AFFINITY_BITS
+
+	/* Extract individual affinity fields from MPIDR */
+	ubfx	r0, r3, #MPIDR_AFF0_SHIFT, #MPIDR_AFFINITY_BITS
+	ubfx	r1, r3, #MPIDR_AFF1_SHIFT, #MPIDR_AFFINITY_BITS
+	ubfx	r2, r3, #MPIDR_AFF2_SHIFT, #MPIDR_AFFINITY_BITS
+
+	/* Compute linear position */
+	mov	r3, #FVP_MAX_CPUS_PER_CLUSTER
+	mla	r1, r2, r3, r1
+	mov	r3, #FVP_MAX_PE_PER_CPU
+	mla	r0, r1, r3, r0
+
+	bx	lr
+endfunc plat_arm_calc_core_pos
diff --git a/plat/arm/board/fvp/aarch64/fvp_helpers.S b/plat/arm/board/fvp/aarch64/fvp_helpers.S
new file mode 100644
index 0000000..8efc238
--- /dev/null
+++ b/plat/arm/board/fvp/aarch64/fvp_helpers.S
@@ -0,0 +1,177 @@
+/*
+ * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <arch.h>
+#include <asm_macros.S>
+#include <drivers/arm/gicv2.h>
+#include <drivers/arm/gicv3.h>
+#include <drivers/arm/fvp/fvp_pwrc.h>
+#include <platform_def.h>
+
+	.globl	plat_secondary_cold_boot_setup
+	.globl	plat_get_my_entrypoint
+	.globl	plat_is_my_cpu_primary
+	.globl	plat_arm_calc_core_pos
+
+	/* -----------------------------------------------------
+	 * void plat_secondary_cold_boot_setup (void);
+	 *
+	 * This function performs any platform specific actions
+	 * needed for a secondary cpu after a cold reset e.g
+	 * mark the cpu's presence, mechanism to place it in a
+	 * holding pen etc.
+	 * TODO: Should we read the PSYS register to make sure
+	 * that the request has gone through.
+	 * -----------------------------------------------------
+	 */
+func plat_secondary_cold_boot_setup
+#ifndef EL3_PAYLOAD_BASE
+	/* ---------------------------------------------
+	 * Power down this cpu.
+	 * TODO: Do we need to worry about powering the
+	 * cluster down as well here. That will need
+	 * locks which we won't have unless an elf-
+	 * loader zeroes out the zi section.
+	 * ---------------------------------------------
+	 */
+	mrs	x0, mpidr_el1
+	mov_imm	x1, PWRC_BASE
+	str	w0, [x1, #PPOFFR_OFF]
+
+	/* ---------------------------------------------
+	 * There is no sane reason to come out of this
+	 * wfi so panic if we do. This cpu will be pow-
+	 * ered on and reset by the cpu_on pm api
+	 * ---------------------------------------------
+	 */
+	dsb	sy
+	wfi
+	no_ret	plat_panic_handler
+#else
+	mov_imm	x0, PLAT_ARM_TRUSTED_MAILBOX_BASE
+
+	/* Wait until the entrypoint gets populated */
+poll_mailbox:
+	ldr	x1, [x0]
+	cbz	x1, 1f
+	br	x1
+1:
+	wfe
+	b	poll_mailbox
+#endif /* EL3_PAYLOAD_BASE */
+endfunc plat_secondary_cold_boot_setup
+
+	/* ---------------------------------------------------------------------
+	 * uintptr_t plat_get_my_entrypoint (void);
+	 *
+	 * Main job of this routine is to distinguish between a cold and warm
+	 * boot. On FVP, this information can be queried from the power
+	 * controller. The Power Control SYS Status Register (PSYSR) indicates
+	 * the wake-up reason for the CPU.
+	 *
+	 * For a cold boot, return 0.
+	 * For a warm boot, read the mailbox and return the address it contains.
+	 *
+	 * TODO: PSYSR is a common register and should be
+	 * 	accessed using locks. Since it is not possible
+	 * 	to use locks immediately after a cold reset
+	 * 	we are relying on the fact that after a cold
+	 * 	reset all cpus will read the same WK field
+	 * ---------------------------------------------------------------------
+	 */
+func plat_get_my_entrypoint
+	/* ---------------------------------------------------------------------
+	 * When bit PSYSR.WK indicates either "Wake by PPONR" or "Wake by GIC
+	 * WakeRequest signal" then it is a warm boot.
+	 * ---------------------------------------------------------------------
+	 */
+	mrs	x2, mpidr_el1
+	mov_imm	x1, PWRC_BASE
+	str	w2, [x1, #PSYSR_OFF]
+	ldr	w2, [x1, #PSYSR_OFF]
+	ubfx	w2, w2, #PSYSR_WK_SHIFT, #PSYSR_WK_WIDTH
+	cmp	w2, #WKUP_PPONR
+	beq	warm_reset
+	cmp	w2, #WKUP_GICREQ
+	beq	warm_reset
+
+	/* Cold reset */
+	mov	x0, #0
+	ret
+
+warm_reset:
+	/* ---------------------------------------------------------------------
+	 * A mailbox is maintained in the trusted SRAM. It is flushed out of the
+	 * caches after every update using normal memory so it is safe to read
+	 * it here with SO attributes.
+	 * ---------------------------------------------------------------------
+	 */
+	mov_imm	x0, PLAT_ARM_TRUSTED_MAILBOX_BASE
+	ldr	x0, [x0]
+	cbz	x0, _panic_handler
+	ret
+
+	/* ---------------------------------------------------------------------
+	 * The power controller indicates this is a warm reset but the mailbox
+	 * is empty. This should never happen!
+	 * ---------------------------------------------------------------------
+	 */
+_panic_handler:
+	no_ret	plat_panic_handler
+endfunc plat_get_my_entrypoint
+
+	/* -----------------------------------------------------
+	 * unsigned int plat_is_my_cpu_primary (void);
+	 *
+	 * Find out whether the current cpu is the primary
+	 * cpu.
+	 * -----------------------------------------------------
+	 */
+func plat_is_my_cpu_primary
+	mrs	x0, mpidr_el1
+	mov_imm	x1, MPIDR_AFFINITY_MASK
+	and	x0, x0, x1
+	cmp	x0, #FVP_PRIMARY_CPU
+	cset	w0, eq
+	ret
+endfunc plat_is_my_cpu_primary
+
+	/* ---------------------------------------------------------------------
+	 * unsigned int plat_arm_calc_core_pos(u_register_t mpidr)
+	 *
+	 * Function to calculate the core position on FVP.
+	 *
+	 * (ClusterId * FVP_MAX_CPUS_PER_CLUSTER * FVP_MAX_PE_PER_CPU) +
+	 * (CPUId * FVP_MAX_PE_PER_CPU) +
+	 * ThreadId
+	 *
+	 * which can be simplified as:
+	 *
+	 * ((ClusterId * FVP_MAX_CPUS_PER_CLUSTER + CPUId) * FVP_MAX_PE_PER_CPU)
+	 * + ThreadId
+	 * ---------------------------------------------------------------------
+	 */
+func plat_arm_calc_core_pos
+	/*
+	 * Check for MT bit in MPIDR. If not set, shift MPIDR to left to make it
+	 * look as if in a multi-threaded implementation.
+	 */
+	tst	x0, #MPIDR_MT_MASK
+	lsl	x3, x0, #MPIDR_AFFINITY_BITS
+	csel	x3, x3, x0, eq
+
+	/* Extract individual affinity fields from MPIDR */
+	ubfx	x0, x3, #MPIDR_AFF0_SHIFT, #MPIDR_AFFINITY_BITS
+	ubfx	x1, x3, #MPIDR_AFF1_SHIFT, #MPIDR_AFFINITY_BITS
+	ubfx	x2, x3, #MPIDR_AFF2_SHIFT, #MPIDR_AFFINITY_BITS
+
+	/* Compute linear position */
+	mov	x4, #FVP_MAX_CPUS_PER_CLUSTER
+	madd	x1, x2, x4, x1
+	mov	x5, #FVP_MAX_PE_PER_CPU
+	madd	x0, x1, x5, x0
+	ret
+endfunc plat_arm_calc_core_pos
diff --git a/plat/arm/board/fvp/aarch64/fvp_ras.c b/plat/arm/board/fvp/aarch64/fvp_ras.c
new file mode 100644
index 0000000..759f6d0
--- /dev/null
+++ b/plat/arm/board/fvp/aarch64/fvp_ras.c
@@ -0,0 +1,16 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <lib/extensions/ras.h>
+
+struct ras_interrupt fvp_ras_interrupts[] = {
+};
+
+struct err_record_info fvp_err_records[] = {
+};
+
+REGISTER_ERR_RECORD_INFO(fvp_err_records);
+REGISTER_RAS_INTERRUPTS(fvp_ras_interrupts);
diff --git a/plat/arm/board/fvp/fconf/fconf_hw_config_getter.c b/plat/arm/board/fvp/fconf/fconf_hw_config_getter.c
new file mode 100644
index 0000000..45e3b7e
--- /dev/null
+++ b/plat/arm/board/fvp/fconf/fconf_hw_config_getter.c
@@ -0,0 +1,299 @@
+/*
+ * Copyright (c) 2020, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <inttypes.h>
+#include <stdint.h>
+
+#include <common/debug.h>
+#include <common/fdt_wrappers.h>
+#include <fconf_hw_config_getter.h>
+#include <libfdt.h>
+#include <plat/common/platform.h>
+
+struct gicv3_config_t gicv3_config;
+struct hw_topology_t soc_topology;
+struct uart_serial_config_t uart_serial_config;
+struct cpu_timer_t cpu_timer;
+
+#define ILLEGAL_ADDR	ULL(~0)
+
+int fconf_populate_gicv3_config(uintptr_t config)
+{
+	int err;
+	int node;
+	uintptr_t addr;
+
+	/* Necessary to work with libfdt APIs */
+	const void *hw_config_dtb = (const void *)config;
+
+	/*
+	 * Find the offset of the node containing "arm,gic-v3" compatible property.
+	 * Populating fconf strucutures dynamically is not supported for legacy
+	 * systems which use GICv2 IP. Simply skip extracting GIC properties.
+	 */
+	node = fdt_node_offset_by_compatible(hw_config_dtb, -1, "arm,gic-v3");
+	if (node < 0) {
+		WARN("FCONF: Unable to locate node with arm,gic-v3 compatible property\n");
+		return 0;
+	}
+	/* The GICv3 DT binding holds at least two address/size pairs,
+	 * the first describing the distributor, the second the redistributors.
+	 * See: bindings/interrupt-controller/arm,gic-v3.yaml
+	 */
+	err = fdt_get_reg_props_by_index(hw_config_dtb, node, 0, &addr, NULL);
+	if (err < 0) {
+		ERROR("FCONF: Failed to read GICD reg property of GIC node\n");
+		return err;
+	}
+	gicv3_config.gicd_base = addr;
+
+	err = fdt_get_reg_props_by_index(hw_config_dtb, node, 1, &addr, NULL);
+	if (err < 0) {
+		ERROR("FCONF: Failed to read GICR reg property of GIC node\n");
+	} else {
+		gicv3_config.gicr_base = addr;
+	}
+
+	return err;
+}
+
+int fconf_populate_topology(uintptr_t config)
+{
+	int err, node, cluster_node, core_node, thread_node;
+	uint32_t cluster_count = 0, max_cpu_per_cluster = 0, total_cpu_count = 0;
+	uint32_t max_pwr_lvl = 0;
+
+	/* Necessary to work with libfdt APIs */
+	const void *hw_config_dtb = (const void *)config;
+
+	/* Find the offset of the node containing "arm,psci-1.0" compatible property */
+	node = fdt_node_offset_by_compatible(hw_config_dtb, -1, "arm,psci-1.0");
+	if (node < 0) {
+		ERROR("FCONF: Unable to locate node with arm,psci-1.0 compatible property\n");
+		return node;
+	}
+
+	err = fdt_read_uint32(hw_config_dtb, node, "max-pwr-lvl", &max_pwr_lvl);
+	if (err < 0) {
+		/*
+		 * Some legacy FVP dts may not have this property. Assign the default
+		 * value.
+		 */
+		WARN("FCONF: Could not locate max-pwr-lvl property\n");
+		max_pwr_lvl = 2;
+	}
+
+	assert(max_pwr_lvl <= MPIDR_AFFLVL2);
+
+	/* Find the offset of the "cpus" node */
+	node = fdt_path_offset(hw_config_dtb, "/cpus");
+	if (node < 0) {
+		ERROR("FCONF: Node '%s' not found in hardware configuration dtb\n", "cpus");
+		return node;
+	}
+
+	/* A typical cpu-map node in a device tree is shown here for reference
+	cpu-map {
+		cluster0 {
+			core0 {
+				cpu = <&CPU0>;
+			};
+			core1 {
+				cpu = <&CPU1>;
+			};
+		};
+
+		cluster1 {
+			core0 {
+				cpu = <&CPU2>;
+			};
+			core1 {
+				cpu = <&CPU3>;
+			};
+		};
+	};
+	*/
+
+	/* Locate the cpu-map child node */
+	node = fdt_subnode_offset(hw_config_dtb, node, "cpu-map");
+	if (node < 0) {
+		ERROR("FCONF: Node '%s' not found in hardware configuration dtb\n", "cpu-map");
+		return node;
+	}
+
+	uint32_t cpus_per_cluster[PLAT_ARM_CLUSTER_COUNT] = {0};
+
+	/* Iterate through cluster nodes */
+	fdt_for_each_subnode(cluster_node, hw_config_dtb, node) {
+		assert(cluster_count < PLAT_ARM_CLUSTER_COUNT);
+
+		/* Iterate through core nodes */
+		fdt_for_each_subnode(core_node, hw_config_dtb, cluster_node) {
+			/* core nodes may have child nodes i.e., "thread" nodes */
+			if (fdt_first_subnode(hw_config_dtb, core_node) < 0) {
+				cpus_per_cluster[cluster_count]++;
+			} else {
+				/* Multi-threaded CPU description is found in dtb */
+				fdt_for_each_subnode(thread_node, hw_config_dtb, core_node) {
+					cpus_per_cluster[cluster_count]++;
+				}
+
+				/* Since in some dtbs, core nodes may not have thread node,
+				 * no need to error if even one child node is not found.
+				 */
+			}
+		}
+
+		/* Ensure every cluster node has at least 1 child node */
+		if (cpus_per_cluster[cluster_count] < 1U) {
+			ERROR("FCONF: Unable to locate the core node in cluster %d\n", cluster_count);
+			return -1;
+		}
+
+		VERBOSE("CLUSTER ID: %d cpu-count: %d\n", cluster_count,
+					cpus_per_cluster[cluster_count]);
+
+		/* Find the maximum number of cpus in any cluster */
+		max_cpu_per_cluster = MAX(max_cpu_per_cluster, cpus_per_cluster[cluster_count]);
+		total_cpu_count += cpus_per_cluster[cluster_count];
+		cluster_count++;
+	}
+
+
+	/* At least one cluster node is expected in hardware configuration dtb */
+	if (cluster_count < 1U) {
+		ERROR("FCONF: Unable to locate the cluster node in cpu-map node\n");
+		return -1;
+	}
+
+	soc_topology.plat_max_pwr_level = max_pwr_lvl;
+	soc_topology.plat_cluster_count = cluster_count;
+	soc_topology.cluster_cpu_count = max_cpu_per_cluster;
+	soc_topology.plat_cpu_count = total_cpu_count;
+
+	return 0;
+}
+
+int fconf_populate_uart_config(uintptr_t config)
+{
+	int uart_node, node, err;
+	uintptr_t addr;
+	const char *path;
+	uint32_t phandle;
+	uint64_t translated_addr;
+
+	/* Necessary to work with libfdt APIs */
+	const void *hw_config_dtb = (const void *)config;
+
+	/*
+	 * uart child node is indirectly referenced through its path which is
+	 * specified in the `serial1` property of the "aliases" node.
+	 * Note that TF-A boot console is mapped to serial0 while runtime
+	 * console is mapped to serial1.
+	 */
+
+	path = fdt_get_alias(hw_config_dtb, "serial1");
+	if (path == NULL) {
+		ERROR("FCONF: Could not read serial1 property in aliases node\n");
+		return -1;
+	}
+
+	/* Find the offset of the uart serial node */
+	uart_node = fdt_path_offset(hw_config_dtb, path);
+	if (uart_node < 0) {
+		ERROR("FCONF: Failed to locate uart serial node using its path\n");
+		return -1;
+	}
+
+	/* uart serial node has its offset and size of address in reg property */
+	err = fdt_get_reg_props_by_index(hw_config_dtb, uart_node, 0, &addr,
+						NULL);
+	if (err < 0) {
+		ERROR("FCONF: Failed to read reg property of '%s' node\n",
+			"uart serial");
+		return err;
+	}
+	VERBOSE("FCONF: UART node address: %lx\n", addr);
+
+	/*
+	 * Perform address translation of local device address to CPU address
+	 * domain.
+	 */
+	translated_addr = fdtw_translate_address(hw_config_dtb,
+						 uart_node, (uint64_t)addr);
+	if (translated_addr == ILLEGAL_ADDR) {
+		ERROR("FCONF: failed to translate UART node base address");
+		return -1;
+	}
+
+	uart_serial_config.uart_base = translated_addr;
+
+	VERBOSE("FCONF: UART serial device base address: %" PRIx64 "\n",
+		uart_serial_config.uart_base);
+
+	/*
+	 * The phandle of the DT node which captures the clock info of uart
+	 * serial node is specified in the "clocks" property.
+	 */
+	err = fdt_read_uint32(hw_config_dtb, uart_node, "clocks", &phandle);
+	if (err < 0) {
+		ERROR("FCONF: Could not read clocks property in uart serial node\n");
+		return err;
+	}
+
+	node = fdt_node_offset_by_phandle(hw_config_dtb, phandle);
+	if (node < 0) {
+		ERROR("FCONF: Failed to locate clk node using its path\n");
+		return node;
+	}
+
+	/*
+	 * Retrieve clock frequency. We assume clock provider generates a fixed
+	 * clock.
+	 */
+	err = fdt_read_uint32(hw_config_dtb, node, "clock-frequency",
+				&uart_serial_config.uart_clk);
+	if (err < 0) {
+		ERROR("FCONF: Could not read clock-frequency property in clk node\n");
+		return err;
+	}
+
+	VERBOSE("FCONF: UART serial device clk frequency: %x\n",
+		uart_serial_config.uart_clk);
+
+	return 0;
+}
+
+int fconf_populate_cpu_timer(uintptr_t config)
+{
+	int err, node;
+
+	/* Necessary to work with libfdt APIs */
+	const void *hw_config_dtb = (const void *)config;
+
+	/* Find the node offset point to "arm,armv8-timer" compatible property,
+	 * a per-core architected timer attached to a GIC to deliver its per-processor
+	 * interrupts via PPIs */
+	node = fdt_node_offset_by_compatible(hw_config_dtb, -1, "arm,armv8-timer");
+	if (node < 0) {
+		ERROR("FCONF: Unrecognized hardware configuration dtb (%d)\n", node);
+		return node;
+	}
+
+	/* Locate the cell holding the clock-frequency, an optional field */
+	err = fdt_read_uint32(hw_config_dtb, node, "clock-frequency", &cpu_timer.clock_freq);
+	if (err < 0) {
+		WARN("FCONF failed to read clock-frequency property\n");
+	}
+
+	return 0;
+}
+
+FCONF_REGISTER_POPULATOR(HW_CONFIG, gicv3_config, fconf_populate_gicv3_config);
+FCONF_REGISTER_POPULATOR(HW_CONFIG, topology, fconf_populate_topology);
+FCONF_REGISTER_POPULATOR(HW_CONFIG, uart_config, fconf_populate_uart_config);
+FCONF_REGISTER_POPULATOR(HW_CONFIG, cpu_timer, fconf_populate_cpu_timer);
diff --git a/plat/arm/board/fvp/fconf/fconf_nt_config_getter.c b/plat/arm/board/fvp/fconf/fconf_nt_config_getter.c
new file mode 100644
index 0000000..e258015
--- /dev/null
+++ b/plat/arm/board/fvp/fconf/fconf_nt_config_getter.c
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2020, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/debug.h>
+#include <common/fdt_wrappers.h>
+
+#include <libfdt.h>
+#include <fconf_nt_config_getter.h>
+
+#include <plat/common/platform.h>
+
+struct event_log_config_t event_log_config;
+
+int fconf_populate_event_log_config(uintptr_t config)
+{
+	int err;
+	int node;
+
+	/* Necessary to work with libfdt APIs */
+	const void *dtb = (const void *)config;
+
+	/*
+	 * Find the offset of the node containing "arm,tpm_event_log"
+	 * compatible property
+	 */
+	const char *compatible_str = "arm,tpm_event_log";
+
+	node = fdt_node_offset_by_compatible(dtb, -1, compatible_str);
+	if (node < 0) {
+		ERROR("FCONF: Can't find '%s' compatible in dtb\n",
+			compatible_str);
+		return node;
+	}
+
+	/* Retrieve Event Log details from the DTB */
+#ifdef SPD_opteed
+	err = fdtw_read_cells(dtb, node, "tpm_event_log_sm_addr", 2,
+				&event_log_config.tpm_event_log_sm_addr);
+	if (err < 0) {
+		ERROR("FCONF: Read cell failed for 'tpm_event_log_sm_addr'\n");
+		return err;
+	}
+#endif
+	err = fdtw_read_cells(dtb, node,
+		"tpm_event_log_addr", 2, &event_log_config.tpm_event_log_addr);
+	if (err < 0) {
+		ERROR("FCONF: Read cell failed for 'tpm_event_log_addr'\n");
+		return err;
+	}
+
+	err = fdtw_read_cells(dtb, node,
+		"tpm_event_log_size", 1, &event_log_config.tpm_event_log_size);
+	if (err < 0) {
+		ERROR("FCONF: Read cell failed for 'tpm_event_log_size'\n");
+	}
+
+	return err;
+}
+
+FCONF_REGISTER_POPULATOR(NT_CONFIG, event_log_config,
+				fconf_populate_event_log_config);
diff --git a/plat/arm/board/fvp/fdts/event_log.dtsi b/plat/arm/board/fvp/fdts/event_log.dtsi
new file mode 100644
index 0000000..47af672
--- /dev/null
+++ b/plat/arm/board/fvp/fdts/event_log.dtsi
@@ -0,0 +1,12 @@
+/*
+ * Copyright (c) 2020, ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/* TPM Event Log Config */
+event_log: tpm_event_log {
+	compatible = "arm,tpm_event_log";
+	tpm_event_log_addr = <0x0 0x0>;
+	tpm_event_log_size = <0x0>;
+};
diff --git a/plat/arm/board/fvp/fdts/fvp_fw_config.dts b/plat/arm/board/fvp/fdts/fvp_fw_config.dts
new file mode 100644
index 0000000..577ac74
--- /dev/null
+++ b/plat/arm/board/fvp/fdts/fvp_fw_config.dts
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2019-2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/tbbr/tbbr_img_def.h>
+
+/dts-v1/;
+
+/ {
+	dtb-registry {
+		compatible = "fconf,dyn_cfg-dtb_registry";
+
+		tb_fw-config {
+			load-address = <0x0 0x4001300>;
+			max-size = <0x1800>;
+			id = <TB_FW_CONFIG_ID>;
+		};
+
+		hw-config {
+			load-address = <0x0 0x07f00000>;
+			max-size = <0x00100000>;
+			id = <HW_CONFIG_ID>;
+			ns-load-address = <0x0 0x82000000>;
+		};
+
+		/*
+		 * Load SoC and TOS firmware configs at the base of
+		 * non shared SRAM. The runtime checks ensure we don't
+		 * overlap BL2, BL31 or BL32. The NT firmware config
+		 * is loaded at base of DRAM.
+		 */
+		soc_fw-config {
+			load-address = <0x0 0x04001300>;
+			max-size = <0x200>;
+			id = <SOC_FW_CONFIG_ID>;
+		};
+
+/* If required, SPD should enable loading of trusted OS fw config */
+#if defined(SPD_tspd) || defined(SPD_spmd)
+		tos_fw-config {
+			load-address = <0x0 0x04001500>;
+			max-size = <0xB00>;
+			id = <TOS_FW_CONFIG_ID>;
+		};
+#endif
+
+		nt_fw-config {
+			load-address = <0x0 0x80000000>;
+			max-size = <0x200>;
+			id = <NT_FW_CONFIG_ID>;
+		};
+	};
+};
diff --git a/plat/arm/board/fvp/fdts/fvp_nt_fw_config.dts b/plat/arm/board/fvp/fdts/fvp_nt_fw_config.dts
new file mode 100644
index 0000000..8f32b98
--- /dev/null
+++ b/plat/arm/board/fvp/fdts/fvp_nt_fw_config.dts
@@ -0,0 +1,19 @@
+/*
+ * Copyright (c) 2018-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+#if MEASURED_BOOT
+#include "event_log.dtsi"
+#endif
+};
+
+#if MEASURED_BOOT && defined(SPD_opteed)
+&event_log {
+	tpm_event_log_sm_addr = <0x0 0x0>;
+};
+#endif
diff --git a/plat/arm/board/fvp/fdts/fvp_soc_fw_config.dts b/plat/arm/board/fvp/fdts/fvp_soc_fw_config.dts
new file mode 100644
index 0000000..7ab980b
--- /dev/null
+++ b/plat/arm/board/fvp/fdts/fvp_soc_fw_config.dts
@@ -0,0 +1,11 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+
+};
diff --git a/plat/arm/board/fvp/fdts/fvp_spmc_manifest.dts b/plat/arm/board/fvp/fdts/fvp_spmc_manifest.dts
new file mode 100644
index 0000000..4543671
--- /dev/null
+++ b/plat/arm/board/fvp/fdts/fvp_spmc_manifest.dts
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2020-2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+/dts-v1/;
+
+#define	AFF	00
+
+#include "fvp-defs.dtsi"
+#undef POST
+#define	POST \
+	};
+
+/ {
+	compatible = "arm,ffa-core-manifest-1.0";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	attribute {
+		spmc_id = <0x8000>;
+		maj_ver = <0x1>;
+		min_ver = <0x1>;
+		exec_state = <0x0>;
+		load_address = <0x0 0x6000000>;
+		entrypoint = <0x0 0x6000000>;
+		binary_size = <0x80000>;
+	};
+
+	hypervisor {
+		compatible = "hafnium,hafnium";
+		vm1 {
+			is_ffa_partition;
+			debug_name = "cactus-primary";
+			load_address = <0x7000000>;
+			vcpu_count = <8>;
+			mem_size = <1048576>;
+		};
+		vm2 {
+			is_ffa_partition;
+			debug_name = "cactus-secondary";
+			load_address = <0x7100000>;
+			vcpu_count = <8>;
+			mem_size = <1048576>;
+		};
+		vm3 {
+			is_ffa_partition;
+			debug_name = "cactus-tertiary";
+			load_address = <0x7200000>;
+			vcpu_count = <1>;
+			mem_size = <1048576>;
+		};
+		vm4 {
+			is_ffa_partition;
+			debug_name = "ivy";
+			load_address = <0x7600000>;
+			vcpu_count = <1>;
+			mem_size = <1048576>;
+		};
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		CPU_0
+
+		/*
+		 * SPMC (Hafnium) requires secondary core nodes are declared
+		 * in descending order.
+		 */
+		CPU_7
+		CPU_6
+		CPU_5
+		CPU_4
+		CPU_3
+		CPU_2
+		CPU_1
+	};
+
+	memory@6000000 {
+		device_type = "memory";
+		reg = <0x0 0x6000000 0x2000000>; /* Trusted DRAM */
+	};
+
+#if MEASURED_BOOT
+#include "event_log.dtsi"
+#endif
+};
diff --git a/plat/arm/board/fvp/fdts/fvp_spmc_optee_sp_manifest.dts b/plat/arm/board/fvp/fdts/fvp_spmc_optee_sp_manifest.dts
new file mode 100644
index 0000000..041dade
--- /dev/null
+++ b/plat/arm/board/fvp/fdts/fvp_spmc_optee_sp_manifest.dts
@@ -0,0 +1,64 @@
+/*
+ * Copyright (c) 2020-2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+/dts-v1/;
+
+#define	AFF	00
+
+#include "fvp-defs.dtsi"
+#undef POST
+#define	POST \
+	};
+
+/ {
+	compatible = "arm,ffa-core-manifest-1.0";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	attribute {
+		spmc_id = <0x8000>;
+		maj_ver = <0x1>;
+		min_ver = <0x1>;
+		exec_state = <0x0>;
+		load_address = <0x0 0x6000000>;
+		entrypoint = <0x0 0x6000000>;
+		binary_size = <0x80000>;
+	};
+
+	hypervisor {
+		compatible = "hafnium,hafnium";
+		vm1 {
+			is_ffa_partition;
+			debug_name = "op-tee";
+			load_address = <0x6280000>;
+			vcpu_count = <8>;
+			mem_size = <1048576>;
+		};
+	};
+
+	cpus {
+		#address-cells = <0x2>;
+		#size-cells = <0x0>;
+
+		CPU_0
+
+		/*
+		 * SPMC (Hafnium) requires secondary core nodes are declared
+		 * in descending order.
+		 */
+		CPU_7
+		CPU_6
+		CPU_5
+		CPU_4
+		CPU_3
+		CPU_2
+		CPU_1
+	};
+
+	memory@6000000 {
+		device_type = "memory";
+		reg = <0x0 0x6000000 0x2000000>; /* Trusted DRAM */
+	};
+};
diff --git a/plat/arm/board/fvp/fdts/fvp_tb_fw_config.dts b/plat/arm/board/fvp/fdts/fvp_tb_fw_config.dts
new file mode 100644
index 0000000..6fd334d
--- /dev/null
+++ b/plat/arm/board/fvp/fdts/fvp_tb_fw_config.dts
@@ -0,0 +1,127 @@
+/*
+ * Copyright (c) 2020-2022, ARM Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <lib/libc/cdefs.h>
+
+/dts-v1/;
+
+/ {
+	tb_fw-config {
+		compatible = "arm,tb_fw";
+
+		/* Disable authentication for development */
+		disable_auth = <0x0>;
+
+		/*
+		 * The following two entries are placeholders for Mbed TLS
+		 * heap information. The default values don't matter since
+		 * they will be overwritten by BL1.
+		 * In case of having shared Mbed TLS heap between BL1 and BL2,
+		 * BL1 will populate these two properties with the respective
+		 * info about the shared heap. This info will be available for
+		 * BL2 in order to locate and re-use the heap.
+		 */
+		mbedtls_heap_addr = <0x0 0x0>;
+		mbedtls_heap_size = <0x0>;
+	};
+
+	/*
+	 * UUID's here are UUID RFC 4122 compliant meaning fieds are stored in
+	 * network order (big endian)
+	 */
+
+#if ARM_IO_IN_DTB
+	arm-io_policies {
+		fip-handles {
+			compatible = "arm,io-fip-handle";
+			scp_bl2_uuid = "9766fd3d-89be-e849-ae5d-78a140608213";
+			bl31_uuid = "47d4086d-4cfe-9846-9b95-2950cbbd5a00";
+			bl32_uuid = "05d0e189-53dc-1347-8d2b-500a4b7a3e38";
+			bl32_extra1_uuid = "0b70c29b-2a5a-7840-9f65-0a5682738288";
+			bl32_extra2_uuid = "8ea87bb1-cfa2-3f4d-85fd-e7bba50220d9";
+			bl33_uuid = "d6d0eea7-fcea-d54b-9782-9934f234b6e4";
+			hw_cfg_uuid = "08b8f1d9-c9cf-9349-a962-6fbc6b7265cc";
+			soc_fw_cfg_uuid = "9979814b-0376-fb46-8c8e-8d267f7859e0";
+			tos_fw_cfg_uuid = "26257c1a-dbc6-7f47-8d96-c4c4b0248021";
+			nt_fw_cfg_uuid = "28da9815-93e8-7e44-ac66-1aaf801550f9";
+			cca_cert_uuid = "36d83d85-761d-4daf-96f1-cd99d6569b00";
+			core_swd_cert_uuid = "52222d31-820f-494d-8bbc-ea6825d3c35a";
+			plat_cert_uuid = "d43cd902-5b9f-412e-8ac6-92b6d18be60d";
+			t_key_cert_uuid = "827ee890-f860-e411-a1b4-777a21b4f94c";
+			scp_fw_key_uuid = "024221a1-f860-e411-8d9b-f33c0e15a014";
+			soc_fw_key_uuid = "8ab8becc-f960-e411-9ad0-eb4822d8dcf8";
+			tos_fw_key_cert_uuid = "9477d603-fb60-e411-85dd-b7105b8cee04";
+			nt_fw_key_cert_uuid = "8ad5832a-fb60-e411-8aaf-df30bbc49859";
+			scp_fw_content_cert_uuid = "44be6f04-5e63-e411-b28b-73d8eaae9656";
+			soc_fw_content_cert_uuid = "e2b20c20-5e63-e411-9ce8-abccf92bb666";
+			tos_fw_content_cert_uuid = "a49f4411-5e63-e411-8728-3f05722af33d";
+			nt_fw_content_cert_uuid = "8ec4c1f3-5d63-e411-a7a9-87ee40b23fa7";
+			sp_content_cert_uuid = "776dfd44-8697-4c3b-91eb-c13e025a2a6f";
+		};
+	};
+#endif /* ARM_IO_IN_DTB */
+
+	secure-partitions {
+		compatible = "arm,sp";
+
+#ifdef ARM_BL2_SP_LIST_DTS
+	#include __XSTRING(ARM_BL2_SP_LIST_DTS)
+#else
+#ifdef OPTEE_SP_FW_CONFIG
+		op-tee {
+			uuid = "486178e0-e7f8-11e3-bc5e-0002a5d5c51b";
+			load-address = <0x6280000>;
+		};
+#else
+		cactus-primary {
+			uuid = "b4b5671e-4a90-4fe1-b81f-fb13dae1dacb";
+			load-address = <0x7000000>;
+			owner = "SiP";
+		};
+
+		cactus-secondary {
+			uuid = "d1582309-f023-47b9-827c-4464f5578fc8";
+			load-address = <0x7100000>;
+			owner = "Plat";
+		};
+
+		cactus-tertiary {
+			uuid = "79b55c73-1d8c-44b9-8593-61e1770ad8d2";
+			load-address = <0x7200000>;
+			owner = "Plat";
+		};
+
+		ivy {
+			uuid = "eaba83d8-baaf-4eaf-8144-f7fdcbe544a7";
+			load-address = <0x7600000>;
+			owner = "Plat";
+		};
+#endif
+#endif /* ARM_BL2_SP_LIST_DTS */
+	};
+
+#if COT_DESC_IN_DTB
+	#include "cot_descriptors.dtsi"
+#endif
+
+#if MEASURED_BOOT
+	#include "event_log.dtsi"
+#endif
+
+};
+
+#if COT_DESC_IN_DTB
+
+#include "../fvp_def.h"
+
+&trusted_nv_counter {
+	reg = <TFW_NVCTR_BASE>;
+};
+
+&non_trusted_nv_counter {
+	reg = <NTFW_CTR_BASE>;
+};
+#endif
diff --git a/plat/arm/board/fvp/fdts/fvp_tsp_fw_config.dts b/plat/arm/board/fvp/fdts/fvp_tsp_fw_config.dts
new file mode 100644
index 0000000..7bed6cb
--- /dev/null
+++ b/plat/arm/board/fvp/fdts/fvp_tsp_fw_config.dts
@@ -0,0 +1,13 @@
+/*
+ * Copyright (c) 2018-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+/dts-v1/;
+
+/ {
+#if MEASURED_BOOT
+#include "event_log.dtsi"
+#endif
+};
diff --git a/plat/arm/board/fvp/fdts/fvp_tsp_sp_manifest.dts b/plat/arm/board/fvp/fdts/fvp_tsp_sp_manifest.dts
new file mode 100644
index 0000000..1587c72
--- /dev/null
+++ b/plat/arm/board/fvp/fdts/fvp_tsp_sp_manifest.dts
@@ -0,0 +1,34 @@
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+/dts-v1/;
+
+#define	AFF	00
+
+#include "fvp-defs.dtsi"
+#undef POST
+#define	POST \
+	};
+
+#define S_EL0	(0x1)
+#define S_EL1	(0x2)
+
+/* For consumption by EL3 SPMC. */
+/ {
+	compatible = "arm,ffa-manifest-1.0";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	ffa-version = <0x00010001>; /* 31:16 - Major, 15:0 - Minor */
+	id = <0x8001>;
+	uuid = <0x6b43b460 0x74a24b78 0xade24502 0x40682886>;
+	messaging-method = <0x3>; /* Direct Messaging Only */
+	exception-level = <S_EL1>;
+	execution-state = <0>;
+	execution-ctx-count = <8>;
+	gp-register-num = <0>;
+	/* Subscribe to CPU_OFF, CPU_SUSPEND and CPU_SUSPEND_RESUME PM Msgs */
+	power-management-messages = <0x7>;
+};
diff --git a/plat/arm/board/fvp/fdts/optee_sp_manifest.dts b/plat/arm/board/fvp/fdts/optee_sp_manifest.dts
new file mode 100644
index 0000000..27f4724
--- /dev/null
+++ b/plat/arm/board/fvp/fdts/optee_sp_manifest.dts
@@ -0,0 +1,44 @@
+/*
+ * Copyright (c) 2020-2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ * This file is a Partition Manifest (PM) for a minimal Secure Partition (SP)
+ * that has additional optional properties defined.
+ *
+ */
+
+/dts-v1/;
+
+/ {
+	compatible = "arm,ffa-manifest-1.0";
+
+	/* Properties */
+	description = "op-tee";
+	ffa-version = <0x00010000>; /* 31:16 - Major, 15:0 - Minor */
+	uuid = <0xe0786148 0xe311f8e7 0x02005ebc 0x1bc5d5a5>;
+	id = <1>;
+	execution-ctx-count = <8>;
+	exception-level = <2>; /* S-EL1 */
+	execution-state = <0>; /* AARCH64 */
+	load-address = <0x6280000>;
+	entrypoint-offset = <0x4000>;
+	xlat-granule = <0>; /* 4KiB */
+	boot-order = <0>;
+	messaging-method = <0x3>; /* Direct request/response supported. */
+	managed-exit;
+	run-time-model = <1>; /* SP pre-emptible. */
+
+	/* Boot protocol */
+	gp-register-num = <0x0>;
+
+	device-regions {
+		compatible = "arm,ffa-manifest-device-regions";
+
+		uart1 {
+			base-address = <0x00000000 0x1c0a0000>;
+			pages-count = <1>;
+			attributes = <0x3>; /* read-write */
+		};
+	};
+};
diff --git a/plat/arm/board/fvp/fvp_bl1_measured_boot.c b/plat/arm/board/fvp/fvp_bl1_measured_boot.c
new file mode 100644
index 0000000..76cd918
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_bl1_measured_boot.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright (c) 2021-2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <drivers/measured_boot/event_log/event_log.h>
+#include <drivers/measured_boot/rss/rss_measured_boot.h>
+#include <plat/arm/common/plat_arm.h>
+
+/* Event Log data */
+static uint8_t event_log[PLAT_ARM_EVENT_LOG_MAX_SIZE];
+
+/* FVP table with platform specific image IDs, names and PCRs */
+const event_log_metadata_t fvp_event_log_metadata[] = {
+	{ FW_CONFIG_ID, EVLOG_FW_CONFIG_STRING, PCR_0 },
+	{ TB_FW_CONFIG_ID, EVLOG_TB_FW_CONFIG_STRING, PCR_0 },
+	{ BL2_IMAGE_ID, EVLOG_BL2_STRING, PCR_0 },
+
+	{ EVLOG_INVALID_ID, NULL, (unsigned int)(-1) }	/* Terminator */
+};
+
+/* FVP table with platform specific image IDs and metadata. Intentionally not a
+ * const struct, some members might set by bootloaders during trusted boot.
+ */
+struct rss_mboot_metadata fvp_rss_mboot_metadata[] = {
+	{
+		.id = FW_CONFIG_ID,
+		.slot = U(6),
+		.signer_id_size = SIGNER_ID_MIN_SIZE,
+		.sw_type = RSS_MBOOT_FW_CONFIG_STRING,
+		.lock_measurement = true },
+	{
+		.id = TB_FW_CONFIG_ID,
+		.slot = U(7),
+		.signer_id_size = SIGNER_ID_MIN_SIZE,
+		.sw_type = RSS_MBOOT_TB_FW_CONFIG_STRING,
+		.lock_measurement = true },
+	{
+		.id = BL2_IMAGE_ID,
+		.slot = U(8),
+		.signer_id_size = SIGNER_ID_MIN_SIZE,
+		.sw_type = RSS_MBOOT_BL2_STRING,
+		.lock_measurement = true },
+
+	{
+		.id = RSS_MBOOT_INVALID_ID }
+};
+
+void bl1_plat_mboot_init(void)
+{
+	event_log_init(event_log, event_log + sizeof(event_log));
+	event_log_write_header();
+
+	rss_measured_boot_init();
+}
+
+void bl1_plat_mboot_finish(void)
+{
+	size_t event_log_cur_size;
+
+	event_log_cur_size = event_log_get_cur_size(event_log);
+	int rc = arm_set_tb_fw_info((uintptr_t)event_log,
+				    event_log_cur_size);
+	if (rc != 0) {
+		/*
+		 * It is a fatal error because on FVP platform, BL2 software
+		 * assumes that a valid Event Log buffer exist and it will use
+		 * same Event Log buffer to append image measurements.
+		 */
+		panic();
+	}
+}
diff --git a/plat/arm/board/fvp/fvp_bl1_setup.c b/plat/arm/board/fvp/fvp_bl1_setup.c
new file mode 100644
index 0000000..59fc0f3
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_bl1_setup.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2013-2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <errno.h>
+
+#include <bl1/bl1.h>
+#include <common/tbbr/tbbr_img_def.h>
+#include <drivers/arm/smmu_v3.h>
+#include <drivers/arm/sp805.h>
+#include <lib/mmio.h>
+#include <plat/arm/common/arm_config.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/arm/common/arm_def.h>
+#include <plat/common/platform.h>
+#include "fvp_private.h"
+
+/*******************************************************************************
+ * Perform any BL1 specific platform actions.
+ ******************************************************************************/
+void bl1_early_platform_setup(void)
+{
+	arm_bl1_early_platform_setup();
+
+	/* Initialize the platform config for future decision making */
+	fvp_config_setup();
+
+	/*
+	 * Initialize Interconnect for this cluster during cold boot.
+	 * No need for locks as no other CPU is active.
+	 */
+	fvp_interconnect_init();
+	/*
+	 * Enable coherency in Interconnect for the primary CPU's cluster.
+	 */
+	fvp_interconnect_enable();
+}
+
+void plat_arm_secure_wdt_start(void)
+{
+	sp805_start(ARM_SP805_TWDG_BASE, ARM_TWDG_LOAD_VAL);
+}
+
+void plat_arm_secure_wdt_stop(void)
+{
+	sp805_stop(ARM_SP805_TWDG_BASE);
+}
+
+void bl1_platform_setup(void)
+{
+	arm_bl1_platform_setup();
+
+	/* Initialize System level generic or SP804 timer */
+	fvp_timer_init();
+
+	/* On FVP RevC, initialize SMMUv3 */
+	if ((arm_config.flags & ARM_CONFIG_FVP_HAS_SMMUV3) != 0U)
+		smmuv3_security_init(PLAT_FVP_SMMUV3_BASE);
+}
+
+__dead2 void bl1_plat_fwu_done(void *client_cookie, void *reserved)
+{
+	uint32_t nv_flags = mmio_read_32(V2M_SYS_NVFLAGS_ADDR);
+
+	/* Clear the NV flags register. */
+	mmio_write_32((V2M_SYSREGS_BASE + V2M_SYS_NVFLAGSCLR),
+		      nv_flags);
+
+	/* Setup the watchdog to reset the system as soon as possible */
+	sp805_refresh(ARM_SP805_TWDG_BASE, 1U);
+
+	while (true)
+		wfi();
+}
+
+/*******************************************************************************
+ * The following function checks if Firmware update is needed by checking error
+ * reported in NV flag.
+ ******************************************************************************/
+bool plat_arm_bl1_fwu_needed(void)
+{
+	int32_t nv_flags = (int32_t)mmio_read_32(V2M_SYS_NVFLAGS_ADDR);
+
+	/* if image load/authentication failed */
+	return ((nv_flags == -EAUTH) || (nv_flags == -ENOENT));
+}
diff --git a/plat/arm/board/fvp/fvp_bl2_el3_setup.c b/plat/arm/board/fvp/fvp_bl2_el3_setup.c
new file mode 100644
index 0000000..7def56a
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_bl2_el3_setup.c
@@ -0,0 +1,30 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat/arm/common/plat_arm.h>
+
+#include "fvp_private.h"
+
+void bl2_el3_early_platform_setup(u_register_t arg0 __unused,
+				  u_register_t arg1 __unused,
+				  u_register_t arg2 __unused,
+				  u_register_t arg3 __unused)
+{
+	arm_bl2_el3_early_platform_setup();
+
+	/* Initialize the platform config for future decision making */
+	fvp_config_setup();
+
+	/*
+	 * Initialize Interconnect for this cluster during cold boot.
+	 * No need for locks as no other CPU is active.
+	 */
+	fvp_interconnect_init();
+	/*
+	 * Enable coherency in Interconnect for the primary CPU's cluster.
+	 */
+	fvp_interconnect_enable();
+}
diff --git a/plat/arm/board/fvp/fvp_bl2_measured_boot.c b/plat/arm/board/fvp/fvp_bl2_measured_boot.c
new file mode 100644
index 0000000..e938e24
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_bl2_measured_boot.c
@@ -0,0 +1,234 @@
+/*
+ * Copyright (c) 2021-2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <common/tbbr/tbbr_img_def.h>
+#include <drivers/measured_boot/event_log/event_log.h>
+#include <drivers/measured_boot/rss/rss_measured_boot.h>
+#include <tools_share/tbbr_oid.h>
+#include <fvp_critical_data.h>
+
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/common_def.h>
+
+/* Event Log data */
+static uint64_t event_log_base;
+
+/* FVP table with platform specific image IDs, names and PCRs */
+const event_log_metadata_t fvp_event_log_metadata[] = {
+	{ BL31_IMAGE_ID, EVLOG_BL31_STRING, PCR_0 },
+	{ BL32_IMAGE_ID, EVLOG_BL32_STRING, PCR_0 },
+	{ BL32_EXTRA1_IMAGE_ID, EVLOG_BL32_EXTRA1_STRING, PCR_0 },
+	{ BL32_EXTRA2_IMAGE_ID, EVLOG_BL32_EXTRA2_STRING, PCR_0 },
+	{ BL33_IMAGE_ID, EVLOG_BL33_STRING, PCR_0 },
+	{ HW_CONFIG_ID, EVLOG_HW_CONFIG_STRING, PCR_0 },
+	{ NT_FW_CONFIG_ID, EVLOG_NT_FW_CONFIG_STRING, PCR_0 },
+	{ SCP_BL2_IMAGE_ID, EVLOG_SCP_BL2_STRING, PCR_0 },
+	{ SOC_FW_CONFIG_ID, EVLOG_SOC_FW_CONFIG_STRING, PCR_0 },
+	{ TOS_FW_CONFIG_ID, EVLOG_TOS_FW_CONFIG_STRING, PCR_0 },
+	{ RMM_IMAGE_ID, EVLOG_RMM_STRING, PCR_0},
+
+#if defined(SPD_spmd)
+	{ SP_PKG1_ID, EVLOG_SP1_STRING, PCR_0 },
+	{ SP_PKG2_ID, EVLOG_SP2_STRING, PCR_0 },
+	{ SP_PKG3_ID, EVLOG_SP3_STRING, PCR_0 },
+	{ SP_PKG4_ID, EVLOG_SP4_STRING, PCR_0 },
+	{ SP_PKG5_ID, EVLOG_SP5_STRING, PCR_0 },
+	{ SP_PKG6_ID, EVLOG_SP6_STRING, PCR_0 },
+	{ SP_PKG7_ID, EVLOG_SP7_STRING, PCR_0 },
+	{ SP_PKG8_ID, EVLOG_SP8_STRING, PCR_0 },
+#endif
+
+	{ CRITICAL_DATA_ID, EVLOG_CRITICAL_DATA_STRING, PCR_1 },
+
+	{ EVLOG_INVALID_ID, NULL, (unsigned int)(-1) }	/* Terminator */
+};
+
+/* FVP table with platform specific image IDs and metadata. Intentionally not a
+ * const struct, some members might set by bootloaders during trusted boot.
+ */
+struct rss_mboot_metadata fvp_rss_mboot_metadata[] = {
+	{
+		.id = BL31_IMAGE_ID,
+		.slot = U(9),
+		.signer_id_size = SIGNER_ID_MIN_SIZE,
+		.sw_type = RSS_MBOOT_BL31_STRING,
+		.lock_measurement = true },
+	{
+		.id = HW_CONFIG_ID,
+		.slot = U(10),
+		.signer_id_size = SIGNER_ID_MIN_SIZE,
+		.sw_type = RSS_MBOOT_HW_CONFIG_STRING,
+		.lock_measurement = true },
+	{
+		.id = SOC_FW_CONFIG_ID,
+		.slot = U(11),
+		.signer_id_size = SIGNER_ID_MIN_SIZE,
+		.sw_type = RSS_MBOOT_SOC_FW_CONFIG_STRING,
+		.lock_measurement = true },
+	{
+		.id = RMM_IMAGE_ID,
+		.slot = U(12),
+		.signer_id_size = SIGNER_ID_MIN_SIZE,
+		.sw_type = RSS_MBOOT_RMM_STRING,
+		.lock_measurement = true },
+	{
+		.id = RSS_MBOOT_INVALID_ID }
+};
+
+void bl2_plat_mboot_init(void)
+{
+	uint8_t *event_log_start;
+	uint8_t *event_log_finish;
+	size_t bl1_event_log_size;
+	int rc;
+
+	rc = arm_get_tb_fw_info(&event_log_base, &bl1_event_log_size);
+	if (rc != 0) {
+		ERROR("%s(): Unable to get Event Log info from TB_FW_CONFIG\n",
+		      __func__);
+		/*
+		 * It is a fatal error because on FVP platform, BL2 software
+		 * assumes that a valid Event Log buffer exist and it will use
+		 * same Event Log buffer to append image measurements.
+		 */
+		panic();
+	}
+
+	/*
+	 * BL1 and BL2 share the same Event Log buffer and that BL2 will
+	 * append its measurements after BL1's
+	 */
+	event_log_start = (uint8_t *)((uintptr_t)event_log_base +
+				      bl1_event_log_size);
+	event_log_finish = (uint8_t *)((uintptr_t)event_log_base +
+				       PLAT_ARM_EVENT_LOG_MAX_SIZE);
+
+	event_log_init((uint8_t *)event_log_start, event_log_finish);
+
+	rss_measured_boot_init();
+}
+
+int plat_mboot_measure_critical_data(unsigned int critical_data_id,
+				     const void *base, size_t size)
+{
+	/*
+	 * It is very unlikely that the critical data size would be
+	 * bigger than 2^32 bytes
+	 */
+	assert(size < UINT32_MAX);
+	assert(base != NULL);
+
+	/* Calculate image hash and record data in Event Log */
+	int err = event_log_measure_and_record((uintptr_t)base, (uint32_t)size,
+					       critical_data_id);
+	if (err != 0) {
+		ERROR("%s%s critical data (%i)\n",
+		      "Failed to ", "record",  err);
+		return err;
+	}
+
+	return 0;
+}
+
+#if TRUSTED_BOARD_BOOT
+static int fvp_populate_critical_data(struct fvp_critical_data *critical_data)
+{
+	char *nv_ctr_oids[MAX_NV_CTR_IDS] = {
+		[TRUSTED_NV_CTR_ID] = TRUSTED_FW_NVCOUNTER_OID,
+		[NON_TRUSTED_NV_CTR_ID] = NON_TRUSTED_FW_NVCOUNTER_OID,
+	};
+
+	for (int i = 0; i < MAX_NV_CTR_IDS; i++) {
+		int rc = plat_get_nv_ctr(nv_ctr_oids[i],
+					 &critical_data->nv_ctr[i]);
+		if (rc != 0) {
+			return rc;
+		}
+	}
+
+	return 0;
+}
+#endif /* TRUSTED_BOARD_BOOT */
+
+static int fvp_populate_and_measure_critical_data(void)
+{
+	int rc = 0;
+
+/*
+ * FVP platform only measures 'platform NV-counter' and hence its
+ * measurement makes sense during Trusted-Boot flow only.
+ */
+#if TRUSTED_BOARD_BOOT
+	struct fvp_critical_data populate_critical_data;
+
+	rc = fvp_populate_critical_data(&populate_critical_data);
+	if (rc == 0) {
+		rc = plat_mboot_measure_critical_data(CRITICAL_DATA_ID,
+						&populate_critical_data,
+						sizeof(populate_critical_data));
+	}
+#endif /* TRUSTED_BOARD_BOOT */
+
+	return rc;
+}
+
+void bl2_plat_mboot_finish(void)
+{
+	int rc;
+
+	/* Event Log address in Non-Secure memory */
+	uintptr_t ns_log_addr;
+
+	/* Event Log filled size */
+	size_t event_log_cur_size;
+
+	rc = fvp_populate_and_measure_critical_data();
+	if (rc != 0) {
+		panic();
+	}
+
+	event_log_cur_size = event_log_get_cur_size((uint8_t *)event_log_base);
+
+	rc = arm_set_nt_fw_info(
+#ifdef SPD_opteed
+			    (uintptr_t)event_log_base,
+#endif
+			    event_log_cur_size, &ns_log_addr);
+	if (rc != 0) {
+		ERROR("%s(): Unable to update %s_FW_CONFIG\n",
+		      __func__, "NT");
+		/*
+		 * It is a fatal error because on FVP secure world software
+		 * assumes that a valid event log exists and will use it to
+		 * record the measurements into the fTPM.
+		 * Note: In FVP platform, OP-TEE uses nt_fw_config to get the
+		 * secure Event Log buffer address.
+		 */
+		panic();
+	}
+
+	/* Copy Event Log to Non-secure memory */
+	(void)memcpy((void *)ns_log_addr, (const void *)event_log_base,
+		     event_log_cur_size);
+
+	/* Ensure that the Event Log is visible in Non-secure memory */
+	flush_dcache_range(ns_log_addr, event_log_cur_size);
+
+#if defined(SPD_tspd) || defined(SPD_spmd)
+	/* Set Event Log data in TOS_FW_CONFIG */
+	rc = arm_set_tos_fw_info((uintptr_t)event_log_base,
+				 event_log_cur_size);
+	if (rc != 0) {
+		ERROR("%s(): Unable to update %s_FW_CONFIG\n",
+		      __func__, "TOS");
+		panic();
+	}
+#endif /* defined(SPD_tspd) || defined(SPD_spmd) */
+
+	dump_event_log((uint8_t *)event_log_base, event_log_cur_size);
+}
diff --git a/plat/arm/board/fvp/fvp_bl2_setup.c b/plat/arm/board/fvp/fvp_bl2_setup.c
new file mode 100644
index 0000000..74e5d72
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_bl2_setup.c
@@ -0,0 +1,105 @@
+/*
+ * Copyright (c) 2013-2022, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <common/debug.h>
+#include <common/desc_image_load.h>
+#include <drivers/arm/sp804_delay_timer.h>
+#include <lib/fconf/fconf.h>
+#include <lib/fconf/fconf_dyn_cfg_getter.h>
+
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+
+#include "fvp_private.h"
+
+void bl2_early_platform_setup2(u_register_t arg0, u_register_t arg1, u_register_t arg2, u_register_t arg3)
+{
+	arm_bl2_early_platform_setup((uintptr_t)arg0, (meminfo_t *)arg1);
+
+	/* Initialize the platform config for future decision making */
+	fvp_config_setup();
+}
+
+void bl2_platform_setup(void)
+{
+	arm_bl2_platform_setup();
+
+	/* Initialize System level generic or SP804 timer */
+	fvp_timer_init();
+}
+
+/*******************************************************************************
+ * This function returns the list of executable images
+ ******************************************************************************/
+struct bl_params *plat_get_next_bl_params(void)
+{
+	struct bl_params *arm_bl_params;
+	const struct dyn_cfg_dtb_info_t *hw_config_info __unused;
+	bl_mem_params_node_t *param_node __unused;
+
+	arm_bl_params = arm_get_next_bl_params();
+
+#if !BL2_AT_EL3 && !EL3_PAYLOAD_BASE
+	const struct dyn_cfg_dtb_info_t *fw_config_info;
+	uintptr_t fw_config_base = 0UL;
+	entry_point_info_t *ep_info;
+
+#if __aarch64__
+	/* Get BL31 image node */
+	param_node = get_bl_mem_params_node(BL31_IMAGE_ID);
+#else /* aarch32 */
+	/* Get SP_MIN image node */
+	param_node = get_bl_mem_params_node(BL32_IMAGE_ID);
+#endif /* __aarch64__ */
+	assert(param_node != NULL);
+
+	/* get fw_config load address */
+	fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, FW_CONFIG_ID);
+	assert(fw_config_info != NULL);
+
+	fw_config_base = fw_config_info->config_addr;
+	assert(fw_config_base != 0UL);
+
+	/*
+	 * Get the entry point info of next executable image and override
+	 * arg1 of entry point info with fw_config base address
+	 */
+	ep_info = &param_node->ep_info;
+	ep_info->args.arg1 = (uint32_t)fw_config_base;
+
+	/* grab NS HW config address */
+	hw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, HW_CONFIG_ID);
+	assert(hw_config_info != NULL);
+
+	/* To retrieve actual size of the HW_CONFIG */
+	param_node = get_bl_mem_params_node(HW_CONFIG_ID);
+	assert(param_node != NULL);
+
+	/* Copy HW config from Secure address to NS address */
+	memcpy((void *)hw_config_info->ns_config_addr,
+	       (void *)hw_config_info->config_addr,
+	       (size_t)param_node->image_info.image_size);
+
+	/*
+	 * Ensure HW-config device tree committed to memory, as there is
+	 * a possibility to use HW-config without cache and MMU enabled
+	 * at BL33
+	 */
+	flush_dcache_range(hw_config_info->ns_config_addr,
+			   param_node->image_info.image_size);
+
+	param_node = get_bl_mem_params_node(BL33_IMAGE_ID);
+	assert(param_node != NULL);
+
+	/* Update BL33's ep info with NS HW config address  */
+	param_node->ep_info.args.arg1 = hw_config_info->ns_config_addr;
+#endif /* !BL2_AT_EL3 && !EL3_PAYLOAD_BASE */
+
+	return arm_bl_params;
+}
diff --git a/plat/arm/board/fvp/fvp_bl2u_setup.c b/plat/arm/board/fvp/fvp_bl2u_setup.c
new file mode 100644
index 0000000..fd73767
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_bl2u_setup.c
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2013-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+
+#include "fvp_private.h"
+
+void bl2u_early_platform_setup(struct meminfo *mem_layout, void *plat_info)
+{
+	arm_bl2u_early_platform_setup(mem_layout, plat_info);
+
+	/* Initialize System level generic or SP804 timer */
+	fvp_timer_init();
+
+	/* Initialize the platform config for future decision making */
+	fvp_config_setup();
+}
diff --git a/plat/arm/board/fvp/fvp_bl31_setup.c b/plat/arm/board/fvp/fvp_bl31_setup.c
new file mode 100644
index 0000000..dd90965
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_bl31_setup.c
@@ -0,0 +1,156 @@
+/*
+ * Copyright (c) 2013-2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <common/debug.h>
+#include <drivers/arm/smmu_v3.h>
+#include <fconf_hw_config_getter.h>
+#include <lib/fconf/fconf.h>
+#include <lib/fconf/fconf_dyn_cfg_getter.h>
+#include <lib/mmio.h>
+#include <plat/arm/common/arm_config.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+
+#include "fvp_private.h"
+
+static const struct dyn_cfg_dtb_info_t *hw_config_info __unused;
+
+void __init bl31_early_platform_setup2(u_register_t arg0,
+		u_register_t arg1, u_register_t arg2, u_register_t arg3)
+{
+	/* Initialize the console to provide early debug support */
+	arm_console_boot_init();
+
+#if !RESET_TO_BL31 && !BL2_AT_EL3
+	const struct dyn_cfg_dtb_info_t *soc_fw_config_info;
+
+	INFO("BL31 FCONF: FW_CONFIG address = %lx\n", (uintptr_t)arg1);
+	/* Fill the properties struct with the info from the config dtb */
+	fconf_populate("FW_CONFIG", arg1);
+
+	soc_fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, SOC_FW_CONFIG_ID);
+	if (soc_fw_config_info != NULL) {
+		arg1 = soc_fw_config_info->config_addr;
+	}
+
+	/*
+	 * arg2 is currently holding the 'secure' address of HW_CONFIG.
+	 * But arm_bl31_early_platform_setup() below expects the 'non-secure'
+	 * address of HW_CONFIG (which it will pass to BL33).
+	 * This why we need to override arg2 here.
+	 */
+	hw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, HW_CONFIG_ID);
+	assert(hw_config_info != NULL);
+	assert(hw_config_info->ns_config_addr != 0UL);
+	arg2 = hw_config_info->ns_config_addr;
+#endif /* !RESET_TO_BL31 && !BL2_AT_EL3 */
+
+	arm_bl31_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
+
+	/* Initialize the platform config for future decision making */
+	fvp_config_setup();
+
+	/*
+	 * Initialize the correct interconnect for this cluster during cold
+	 * boot. No need for locks as no other CPU is active.
+	 */
+	fvp_interconnect_init();
+
+	/*
+	 * Enable coherency in interconnect for the primary CPU's cluster.
+	 * Earlier bootloader stages might already do this (e.g. Trusted
+	 * Firmware's BL1 does it) but we can't assume so. There is no harm in
+	 * executing this code twice anyway.
+	 * FVP PSCI code will enable coherency for other clusters.
+	 */
+	fvp_interconnect_enable();
+
+	/* Initialize System level generic or SP804 timer */
+	fvp_timer_init();
+
+	/* On FVP RevC, initialize SMMUv3 */
+	if ((arm_config.flags & ARM_CONFIG_FVP_HAS_SMMUV3) != 0U)
+		smmuv3_init(PLAT_FVP_SMMUV3_BASE);
+}
+
+void __init bl31_plat_arch_setup(void)
+{
+	int rc __unused;
+	uintptr_t hw_config_base_align __unused;
+	size_t mapped_size_align __unused;
+
+	arm_bl31_plat_arch_setup();
+
+	/*
+	 * For RESET_TO_BL31 systems, BL31 is the first bootloader to run.
+	 * So there is no BL2 to load the HW_CONFIG dtb into memory before
+	 * control is passed to BL31. The code below relies on dynamic mapping
+	 * capability, which is not supported by xlat tables lib V1.
+	 * TODO: remove the ARM_XLAT_TABLES_LIB_V1 check when its support
+	 * gets deprecated.
+	 */
+#if !RESET_TO_BL31 && !BL2_AT_EL3 && !ARM_XLAT_TABLES_LIB_V1
+	assert(hw_config_info != NULL);
+	assert(hw_config_info->config_addr != 0UL);
+
+	/* Page aligned address and size if necessary */
+	hw_config_base_align = page_align(hw_config_info->config_addr, DOWN);
+	mapped_size_align = page_align(hw_config_info->config_max_size, UP);
+
+	if ((hw_config_info->config_addr != hw_config_base_align) &&
+	    (hw_config_info->config_max_size == mapped_size_align)) {
+		mapped_size_align += PAGE_SIZE;
+	}
+
+	/*
+	 * map dynamically HW config region with its aligned base address and
+	 * size
+	 */
+	rc = mmap_add_dynamic_region((unsigned long long)hw_config_base_align,
+				     hw_config_base_align,
+				     mapped_size_align,
+				     MT_RO_DATA);
+	if (rc != 0) {
+		ERROR("Error while mapping HW_CONFIG device tree (%d).\n", rc);
+		panic();
+	}
+
+	/* Populate HW_CONFIG device tree with the mapped address */
+	fconf_populate("HW_CONFIG", hw_config_info->config_addr);
+
+	/* unmap the HW_CONFIG memory region */
+	rc = mmap_remove_dynamic_region(hw_config_base_align, mapped_size_align);
+	if (rc != 0) {
+		ERROR("Error while unmapping HW_CONFIG device tree (%d).\n",
+		      rc);
+		panic();
+	}
+#endif /* !RESET_TO_BL31 && !BL2_AT_EL3 && !ARM_XLAT_TABLES_LIB_V1 */
+}
+
+unsigned int plat_get_syscnt_freq2(void)
+{
+	unsigned int counter_base_frequency;
+
+#if !RESET_TO_BL31 && !BL2_AT_EL3
+	/* Get the frequency through FCONF API for HW_CONFIG */
+	counter_base_frequency = FCONF_GET_PROPERTY(hw_config, cpu_timer, clock_freq);
+	if (counter_base_frequency > 0U) {
+		return counter_base_frequency;
+	}
+#endif
+
+	/* Read the frequency from Frequency modes table */
+	counter_base_frequency = mmio_read_32(ARM_SYS_CNTCTL_BASE + CNTFID_OFF);
+
+	/* The first entry of the frequency modes table must not be 0 */
+	if (counter_base_frequency == 0U) {
+		panic();
+	}
+
+	return counter_base_frequency;
+}
diff --git a/plat/arm/board/fvp/fvp_common.c b/plat/arm/board/fvp/fvp_common.c
new file mode 100644
index 0000000..f8463f1
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_common.c
@@ -0,0 +1,544 @@
+/*
+ * Copyright (c) 2013-2022, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <common/debug.h>
+#include <drivers/arm/cci.h>
+#include <drivers/arm/ccn.h>
+#include <drivers/arm/gicv2.h>
+#include <drivers/arm/sp804_delay_timer.h>
+#include <drivers/generic_delay_timer.h>
+#include <lib/mmio.h>
+#include <lib/smccc.h>
+#include <lib/xlat_tables/xlat_tables_compat.h>
+#include <platform_def.h>
+#include <services/arm_arch_svc.h>
+#if ENABLE_RME
+#include <services/rmm_core_manifest.h>
+#endif
+#if SPM_MM
+#include <services/spm_mm_partition.h>
+#endif
+
+#include <plat/arm/common/arm_config.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+
+#include "fvp_private.h"
+
+/* Defines for GIC Driver build time selection */
+#define FVP_GICV2		1
+#define FVP_GICV3		2
+
+/*******************************************************************************
+ * arm_config holds the characteristics of the differences between the three FVP
+ * platforms (Base, A53_A57 & Foundation). It will be populated during cold boot
+ * at each boot stage by the primary before enabling the MMU (to allow
+ * interconnect configuration) & used thereafter. Each BL will have its own copy
+ * to allow independent operation.
+ ******************************************************************************/
+arm_config_t arm_config;
+
+#define MAP_DEVICE0	MAP_REGION_FLAT(DEVICE0_BASE,			\
+					DEVICE0_SIZE,			\
+					MT_DEVICE | MT_RW | MT_SECURE)
+
+#define MAP_DEVICE1	MAP_REGION_FLAT(DEVICE1_BASE,			\
+					DEVICE1_SIZE,			\
+					MT_DEVICE | MT_RW | MT_SECURE)
+
+#if FVP_GICR_REGION_PROTECTION
+#define MAP_GICD_MEM	MAP_REGION_FLAT(BASE_GICD_BASE,			\
+					BASE_GICD_SIZE,			\
+					MT_DEVICE | MT_RW | MT_SECURE)
+
+/* Map all core's redistributor memory as read-only. After boots up,
+ * per-core map its redistributor memory as read-write */
+#define MAP_GICR_MEM	MAP_REGION_FLAT(BASE_GICR_BASE,			\
+					(BASE_GICR_SIZE * PLATFORM_CORE_COUNT),\
+					MT_DEVICE | MT_RO | MT_SECURE)
+#endif /* FVP_GICR_REGION_PROTECTION */
+
+/*
+ * Need to be mapped with write permissions in order to set a new non-volatile
+ * counter value.
+ */
+#define MAP_DEVICE2	MAP_REGION_FLAT(DEVICE2_BASE,			\
+					DEVICE2_SIZE,			\
+					MT_DEVICE | MT_RW | MT_SECURE)
+
+/*
+ * Table of memory regions for various BL stages to map using the MMU.
+ * This doesn't include Trusted SRAM as setup_page_tables() already takes care
+ * of mapping it.
+ */
+#ifdef IMAGE_BL1
+const mmap_region_t plat_arm_mmap[] = {
+	ARM_MAP_SHARED_RAM,
+	V2M_MAP_FLASH0_RO,
+	V2M_MAP_IOFPGA,
+	MAP_DEVICE0,
+#if FVP_INTERCONNECT_DRIVER == FVP_CCN
+	MAP_DEVICE1,
+#endif
+#if TRUSTED_BOARD_BOOT
+	/* To access the Root of Trust Public Key registers. */
+	MAP_DEVICE2,
+	/* Map DRAM to authenticate NS_BL2U image. */
+	ARM_MAP_NS_DRAM1,
+#endif
+	{0}
+};
+#endif
+#ifdef IMAGE_BL2
+const mmap_region_t plat_arm_mmap[] = {
+	ARM_MAP_SHARED_RAM,
+	V2M_MAP_FLASH0_RW,
+	V2M_MAP_IOFPGA,
+	MAP_DEVICE0,
+#if FVP_INTERCONNECT_DRIVER == FVP_CCN
+	MAP_DEVICE1,
+#endif
+	ARM_MAP_NS_DRAM1,
+#ifdef __aarch64__
+	ARM_MAP_DRAM2,
+#endif
+	/*
+	 * Required to load HW_CONFIG, SPMC and SPs to trusted DRAM.
+	 */
+	ARM_MAP_TRUSTED_DRAM,
+#if ENABLE_RME
+	ARM_MAP_RMM_DRAM,
+	ARM_MAP_GPT_L1_DRAM,
+#endif /* ENABLE_RME */
+#ifdef SPD_tspd
+	ARM_MAP_TSP_SEC_MEM,
+#endif
+#if TRUSTED_BOARD_BOOT
+	/* To access the Root of Trust Public Key registers. */
+	MAP_DEVICE2,
+#endif /* TRUSTED_BOARD_BOOT */
+
+#if CRYPTO_SUPPORT && !BL2_AT_EL3
+	/*
+	 * To access shared the Mbed TLS heap while booting the
+	 * system with Crypto support
+	 */
+	ARM_MAP_BL1_RW,
+#endif /* CRYPTO_SUPPORT && !BL2_AT_EL3 */
+#if SPM_MM || SPMC_AT_EL3
+	ARM_SP_IMAGE_MMAP,
+#endif
+#if ARM_BL31_IN_DRAM
+	ARM_MAP_BL31_SEC_DRAM,
+#endif
+#ifdef SPD_opteed
+	ARM_MAP_OPTEE_CORE_MEM,
+	ARM_OPTEE_PAGEABLE_LOAD_MEM,
+#endif
+	{0}
+};
+#endif
+#ifdef IMAGE_BL2U
+const mmap_region_t plat_arm_mmap[] = {
+	MAP_DEVICE0,
+	V2M_MAP_IOFPGA,
+	{0}
+};
+#endif
+#ifdef IMAGE_BL31
+const mmap_region_t plat_arm_mmap[] = {
+	ARM_MAP_SHARED_RAM,
+#if USE_DEBUGFS
+	/* Required by devfip, can be removed if devfip is not used */
+	V2M_MAP_FLASH0_RW,
+#endif /* USE_DEBUGFS */
+	ARM_MAP_EL3_TZC_DRAM,
+	V2M_MAP_IOFPGA,
+	MAP_DEVICE0,
+#if FVP_GICR_REGION_PROTECTION
+	MAP_GICD_MEM,
+	MAP_GICR_MEM,
+#else
+	MAP_DEVICE1,
+#endif /* FVP_GICR_REGION_PROTECTION */
+	ARM_V2M_MAP_MEM_PROTECT,
+#if SPM_MM
+	ARM_SPM_BUF_EL3_MMAP,
+#endif
+#if ENABLE_RME
+	ARM_MAP_GPT_L1_DRAM,
+	ARM_MAP_EL3_RMM_SHARED_MEM,
+#endif
+	{0}
+};
+
+#if defined(IMAGE_BL31) && SPM_MM
+const mmap_region_t plat_arm_secure_partition_mmap[] = {
+	V2M_MAP_IOFPGA_EL0, /* for the UART */
+	MAP_REGION_FLAT(DEVICE0_BASE,				\
+			DEVICE0_SIZE,				\
+			MT_DEVICE | MT_RO | MT_SECURE | MT_USER),
+	ARM_SP_IMAGE_MMAP,
+	ARM_SP_IMAGE_NS_BUF_MMAP,
+	ARM_SP_IMAGE_RW_MMAP,
+	ARM_SPM_BUF_EL0_MMAP,
+	{0}
+};
+#endif
+#endif
+#ifdef IMAGE_BL32
+const mmap_region_t plat_arm_mmap[] = {
+#ifndef __aarch64__
+	ARM_MAP_SHARED_RAM,
+	ARM_V2M_MAP_MEM_PROTECT,
+#endif
+	V2M_MAP_IOFPGA,
+	MAP_DEVICE0,
+	MAP_DEVICE1,
+	{0}
+};
+#endif
+
+#ifdef IMAGE_RMM
+const mmap_region_t plat_arm_mmap[] = {
+	V2M_MAP_IOFPGA,
+	MAP_DEVICE0,
+	MAP_DEVICE1,
+	{0}
+};
+#endif
+
+ARM_CASSERT_MMAP
+
+#if FVP_INTERCONNECT_DRIVER != FVP_CCN
+static const int fvp_cci400_map[] = {
+	PLAT_FVP_CCI400_CLUS0_SL_PORT,
+	PLAT_FVP_CCI400_CLUS1_SL_PORT,
+};
+
+static const int fvp_cci5xx_map[] = {
+	PLAT_FVP_CCI5XX_CLUS0_SL_PORT,
+	PLAT_FVP_CCI5XX_CLUS1_SL_PORT,
+};
+
+static unsigned int get_interconnect_master(void)
+{
+	unsigned int master;
+	u_register_t mpidr;
+
+	mpidr = read_mpidr_el1();
+	master = ((arm_config.flags & ARM_CONFIG_FVP_SHIFTED_AFF) != 0U) ?
+		MPIDR_AFFLVL2_VAL(mpidr) : MPIDR_AFFLVL1_VAL(mpidr);
+
+	assert(master < FVP_CLUSTER_COUNT);
+	return master;
+}
+#endif
+
+#if defined(IMAGE_BL31) && SPM_MM
+/*
+ * Boot information passed to a secure partition during initialisation. Linear
+ * indices in MP information will be filled at runtime.
+ */
+static spm_mm_mp_info_t sp_mp_info[] = {
+	[0] = {0x80000000, 0},
+	[1] = {0x80000001, 0},
+	[2] = {0x80000002, 0},
+	[3] = {0x80000003, 0},
+	[4] = {0x80000100, 0},
+	[5] = {0x80000101, 0},
+	[6] = {0x80000102, 0},
+	[7] = {0x80000103, 0},
+};
+
+const spm_mm_boot_info_t plat_arm_secure_partition_boot_info = {
+	.h.type              = PARAM_SP_IMAGE_BOOT_INFO,
+	.h.version           = VERSION_1,
+	.h.size              = sizeof(spm_mm_boot_info_t),
+	.h.attr              = 0,
+	.sp_mem_base         = ARM_SP_IMAGE_BASE,
+	.sp_mem_limit        = ARM_SP_IMAGE_LIMIT,
+	.sp_image_base       = ARM_SP_IMAGE_BASE,
+	.sp_stack_base       = PLAT_SP_IMAGE_STACK_BASE,
+	.sp_heap_base        = ARM_SP_IMAGE_HEAP_BASE,
+	.sp_ns_comm_buf_base = PLAT_SP_IMAGE_NS_BUF_BASE,
+	.sp_shared_buf_base  = PLAT_SPM_BUF_BASE,
+	.sp_image_size       = ARM_SP_IMAGE_SIZE,
+	.sp_pcpu_stack_size  = PLAT_SP_IMAGE_STACK_PCPU_SIZE,
+	.sp_heap_size        = ARM_SP_IMAGE_HEAP_SIZE,
+	.sp_ns_comm_buf_size = PLAT_SP_IMAGE_NS_BUF_SIZE,
+	.sp_shared_buf_size  = PLAT_SPM_BUF_SIZE,
+	.num_sp_mem_regions  = ARM_SP_IMAGE_NUM_MEM_REGIONS,
+	.num_cpus            = PLATFORM_CORE_COUNT,
+	.mp_info             = &sp_mp_info[0],
+};
+
+const struct mmap_region *plat_get_secure_partition_mmap(void *cookie)
+{
+	return plat_arm_secure_partition_mmap;
+}
+
+const struct spm_mm_boot_info *plat_get_secure_partition_boot_info(
+		void *cookie)
+{
+	return &plat_arm_secure_partition_boot_info;
+}
+#endif
+
+/*******************************************************************************
+ * A single boot loader stack is expected to work on both the Foundation FVP
+ * models and the two flavours of the Base FVP models (AEMv8 & Cortex). The
+ * SYS_ID register provides a mechanism for detecting the differences between
+ * these platforms. This information is stored in a per-BL array to allow the
+ * code to take the correct path.Per BL platform configuration.
+ ******************************************************************************/
+void __init fvp_config_setup(void)
+{
+	unsigned int rev, hbi, bld, arch, sys_id;
+
+	sys_id = mmio_read_32(V2M_SYSREGS_BASE + V2M_SYS_ID);
+	rev = (sys_id >> V2M_SYS_ID_REV_SHIFT) & V2M_SYS_ID_REV_MASK;
+	hbi = (sys_id >> V2M_SYS_ID_HBI_SHIFT) & V2M_SYS_ID_HBI_MASK;
+	bld = (sys_id >> V2M_SYS_ID_BLD_SHIFT) & V2M_SYS_ID_BLD_MASK;
+	arch = (sys_id >> V2M_SYS_ID_ARCH_SHIFT) & V2M_SYS_ID_ARCH_MASK;
+
+	if (arch != ARCH_MODEL) {
+		ERROR("This firmware is for FVP models\n");
+		panic();
+	}
+
+	/*
+	 * The build field in the SYS_ID tells which variant of the GIC
+	 * memory is implemented by the model.
+	 */
+	switch (bld) {
+	case BLD_GIC_VE_MMAP:
+		ERROR("Legacy Versatile Express memory map for GIC peripheral"
+				" is not supported\n");
+		panic();
+		break;
+	case BLD_GIC_A53A57_MMAP:
+		break;
+	default:
+		ERROR("Unsupported board build %x\n", bld);
+		panic();
+	}
+
+	/*
+	 * The hbi field in the SYS_ID is 0x020 for the Base FVP & 0x010
+	 * for the Foundation FVP.
+	 */
+	switch (hbi) {
+	case HBI_FOUNDATION_FVP:
+		arm_config.flags = 0;
+
+		/*
+		 * Check for supported revisions of Foundation FVP
+		 * Allow future revisions to run but emit warning diagnostic
+		 */
+		switch (rev) {
+		case REV_FOUNDATION_FVP_V2_0:
+		case REV_FOUNDATION_FVP_V2_1:
+		case REV_FOUNDATION_FVP_v9_1:
+		case REV_FOUNDATION_FVP_v9_6:
+			break;
+		default:
+			WARN("Unrecognized Foundation FVP revision %x\n", rev);
+			break;
+		}
+		break;
+	case HBI_BASE_FVP:
+		arm_config.flags |= (ARM_CONFIG_BASE_MMAP | ARM_CONFIG_HAS_TZC);
+
+		/*
+		 * Check for supported revisions
+		 * Allow future revisions to run but emit warning diagnostic
+		 */
+		switch (rev) {
+		case REV_BASE_FVP_V0:
+			arm_config.flags |= ARM_CONFIG_FVP_HAS_CCI400;
+			break;
+		case REV_BASE_FVP_REVC:
+			arm_config.flags |= (ARM_CONFIG_FVP_HAS_SMMUV3 |
+					ARM_CONFIG_FVP_HAS_CCI5XX);
+			break;
+		default:
+			WARN("Unrecognized Base FVP revision %x\n", rev);
+			break;
+		}
+		break;
+	default:
+		ERROR("Unsupported board HBI number 0x%x\n", hbi);
+		panic();
+	}
+
+	/*
+	 * We assume that the presence of MT bit, and therefore shifted
+	 * affinities, is uniform across the platform: either all CPUs, or no
+	 * CPUs implement it.
+	 */
+	if ((read_mpidr_el1() & MPIDR_MT_MASK) != 0U)
+		arm_config.flags |= ARM_CONFIG_FVP_SHIFTED_AFF;
+}
+
+
+void __init fvp_interconnect_init(void)
+{
+#if FVP_INTERCONNECT_DRIVER == FVP_CCN
+	if (ccn_get_part0_id(PLAT_ARM_CCN_BASE) != CCN_502_PART0_ID) {
+		ERROR("Unrecognized CCN variant detected. Only CCN-502 is supported");
+		panic();
+	}
+
+	plat_arm_interconnect_init();
+#else
+	uintptr_t cci_base = 0U;
+	const int *cci_map = NULL;
+	unsigned int map_size = 0U;
+
+	/* Initialize the right interconnect */
+	if ((arm_config.flags & ARM_CONFIG_FVP_HAS_CCI5XX) != 0U) {
+		cci_base = PLAT_FVP_CCI5XX_BASE;
+		cci_map = fvp_cci5xx_map;
+		map_size = ARRAY_SIZE(fvp_cci5xx_map);
+	} else if ((arm_config.flags & ARM_CONFIG_FVP_HAS_CCI400) != 0U) {
+		cci_base = PLAT_FVP_CCI400_BASE;
+		cci_map = fvp_cci400_map;
+		map_size = ARRAY_SIZE(fvp_cci400_map);
+	} else {
+		return;
+	}
+
+	assert(cci_base != 0U);
+	assert(cci_map != NULL);
+	cci_init(cci_base, cci_map, map_size);
+#endif
+}
+
+void fvp_interconnect_enable(void)
+{
+#if FVP_INTERCONNECT_DRIVER == FVP_CCN
+	plat_arm_interconnect_enter_coherency();
+#else
+	unsigned int master;
+
+	if ((arm_config.flags & (ARM_CONFIG_FVP_HAS_CCI400 |
+				 ARM_CONFIG_FVP_HAS_CCI5XX)) != 0U) {
+		master = get_interconnect_master();
+		cci_enable_snoop_dvm_reqs(master);
+	}
+#endif
+}
+
+void fvp_interconnect_disable(void)
+{
+#if FVP_INTERCONNECT_DRIVER == FVP_CCN
+	plat_arm_interconnect_exit_coherency();
+#else
+	unsigned int master;
+
+	if ((arm_config.flags & (ARM_CONFIG_FVP_HAS_CCI400 |
+				 ARM_CONFIG_FVP_HAS_CCI5XX)) != 0U) {
+		master = get_interconnect_master();
+		cci_disable_snoop_dvm_reqs(master);
+	}
+#endif
+}
+
+#if CRYPTO_SUPPORT
+int plat_get_mbedtls_heap(void **heap_addr, size_t *heap_size)
+{
+	assert(heap_addr != NULL);
+	assert(heap_size != NULL);
+
+	return arm_get_mbedtls_heap(heap_addr, heap_size);
+}
+#endif /* CRYPTO_SUPPORT */
+
+void fvp_timer_init(void)
+{
+#if USE_SP804_TIMER
+	/* Enable the clock override for SP804 timer 0, which means that no
+	 * clock dividers are applied and the raw (35MHz) clock will be used.
+	 */
+	mmio_write_32(V2M_SP810_BASE, FVP_SP810_CTRL_TIM0_OV);
+
+	/* Initialize delay timer driver using SP804 dual timer 0 */
+	sp804_timer_init(V2M_SP804_TIMER0_BASE,
+			SP804_TIMER_CLKMULT, SP804_TIMER_CLKDIV);
+#else
+	generic_delay_timer_init();
+
+	/* Enable System level generic timer */
+	mmio_write_32(ARM_SYS_CNTCTL_BASE + CNTCR_OFF,
+			CNTCR_FCREQ(0U) | CNTCR_EN);
+#endif /* USE_SP804_TIMER */
+}
+
+/*****************************************************************************
+ * plat_is_smccc_feature_available() - This function checks whether SMCCC
+ *                                     feature is availabile for platform.
+ * @fid: SMCCC function id
+ *
+ * Return SMC_ARCH_CALL_SUCCESS if SMCCC feature is available and
+ * SMC_ARCH_CALL_NOT_SUPPORTED otherwise.
+ *****************************************************************************/
+int32_t plat_is_smccc_feature_available(u_register_t fid)
+{
+	switch (fid) {
+	case SMCCC_ARCH_SOC_ID:
+		return SMC_ARCH_CALL_SUCCESS;
+	default:
+		return SMC_ARCH_CALL_NOT_SUPPORTED;
+	}
+}
+
+/* Get SOC version */
+int32_t plat_get_soc_version(void)
+{
+	return (int32_t)
+		(SOC_ID_SET_JEP_106(ARM_SOC_CONTINUATION_CODE,
+				    ARM_SOC_IDENTIFICATION_CODE) |
+		 (FVP_SOC_ID & SOC_ID_IMPL_DEF_MASK));
+}
+
+/* Get SOC revision */
+int32_t plat_get_soc_revision(void)
+{
+	unsigned int sys_id;
+
+	sys_id = mmio_read_32(V2M_SYSREGS_BASE + V2M_SYS_ID);
+	return (int32_t)(((sys_id >> V2M_SYS_ID_REV_SHIFT) &
+			  V2M_SYS_ID_REV_MASK) & SOC_ID_REV_MASK);
+}
+
+#if ENABLE_RME
+/*
+ * Get a pointer to the RMM-EL3 Shared buffer and return it
+ * through the pointer passed as parameter.
+ *
+ * This function returns the size of the shared buffer.
+ */
+size_t plat_rmmd_get_el3_rmm_shared_mem(uintptr_t *shared)
+{
+	*shared = (uintptr_t)RMM_SHARED_BASE;
+
+	return (size_t)RMM_SHARED_SIZE;
+}
+
+int plat_rmmd_load_manifest(rmm_manifest_t *manifest)
+{
+	assert(manifest != NULL);
+
+	manifest->version = RMMD_MANIFEST_VERSION;
+	manifest->plat_data = (uintptr_t)NULL;
+
+	return 0;
+}
+
+#endif
diff --git a/plat/arm/board/fvp/fvp_common_measured_boot.c b/plat/arm/board/fvp/fvp_common_measured_boot.c
new file mode 100644
index 0000000..93aa055
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_common_measured_boot.c
@@ -0,0 +1,55 @@
+/*
+ * Copyright (c) 2021-2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <stdint.h>
+
+#include <common/desc_image_load.h>
+#include <drivers/measured_boot/event_log/event_log.h>
+#include <drivers/measured_boot/rss/rss_measured_boot.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+
+extern event_log_metadata_t fvp_event_log_metadata[];
+extern struct rss_mboot_metadata fvp_rss_mboot_metadata[];
+
+const event_log_metadata_t *plat_event_log_get_metadata(void)
+{
+	return fvp_event_log_metadata;
+}
+
+struct rss_mboot_metadata *plat_rss_mboot_get_metadata(void)
+{
+	return fvp_rss_mboot_metadata;
+}
+
+int plat_mboot_measure_image(unsigned int image_id, image_info_t *image_data)
+{
+	int err;
+	int rc = 0;
+
+	/* Calculate image hash and record data in Event Log */
+	err = event_log_measure_and_record(image_data->image_base,
+					   image_data->image_size,
+					   image_id);
+	if (err != 0) {
+		ERROR("%s%s image id %u (%i)\n",
+		      "Failed to ", "record in event log", image_id, err);
+		rc = err;
+	}
+
+	/* Calculate image hash and record data in RSS */
+	err = rss_mboot_measure_and_record(image_data->image_base,
+					   image_data->image_size,
+					   image_id);
+	if (err != 0) {
+		ERROR("%s%s image id %u (%i)\n",
+		      "Failed to ", "record in RSS", image_id, err);
+		rc = (rc == 0) ? err : -1;
+	}
+
+	return rc;
+}
diff --git a/plat/arm/board/fvp/fvp_console.c b/plat/arm/board/fvp/fvp_console.c
new file mode 100644
index 0000000..1a6cd42
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_console.c
@@ -0,0 +1,54 @@
+/*
+ * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <platform_def.h>
+
+#include <common/debug.h>
+#include <drivers/arm/pl011.h>
+#include <drivers/console.h>
+#include <fconf_hw_config_getter.h>
+#include <plat/arm/common/plat_arm.h>
+
+static console_t fvp_runtime_console;
+
+/* Initialize the runtime console */
+void arm_console_runtime_init(void)
+{
+	uintptr_t uart_base;
+	uint32_t uart_clk;
+
+	/*
+	 * fconf APIs are not supported for RESET_TO_SP_MIN, RESET_TO_BL31 and
+	 * BL2_AT_EL3 systems.
+	 */
+#if RESET_TO_SP_MIN || RESET_TO_BL31 || BL2_AT_EL3
+	uart_base = PLAT_ARM_RUN_UART_BASE;
+	uart_clk = PLAT_ARM_RUN_UART_CLK_IN_HZ;
+#else
+	uart_base = FCONF_GET_PROPERTY(hw_config, uart_serial_config,
+					uart_base);
+	uart_clk = FCONF_GET_PROPERTY(hw_config, uart_serial_config,
+					uart_clk);
+#endif
+
+	int rc = console_pl011_register(uart_base, uart_clk,
+					ARM_CONSOLE_BAUDRATE,
+					&fvp_runtime_console);
+
+	if (rc == 0) {
+		panic();
+	}
+
+	console_set_scope(&fvp_runtime_console, CONSOLE_FLAG_RUNTIME);
+}
+
+void arm_console_runtime_end(void)
+{
+	console_flush();
+	(void)console_unregister(&fvp_runtime_console);
+}
diff --git a/plat/arm/board/fvp/fvp_def.h b/plat/arm/board/fvp/fvp_def.h
new file mode 100644
index 0000000..831eb35
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_def.h
@@ -0,0 +1,181 @@
+/*
+ * Copyright (c) 2014-2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FVP_DEF_H
+#define FVP_DEF_H
+
+#include <lib/utils_def.h>
+
+#ifndef FVP_CLUSTER_COUNT
+#error "FVP_CLUSTER_COUNT is not set in makefile"
+#endif
+
+#ifndef FVP_MAX_CPUS_PER_CLUSTER
+#error "FVP_MAX_CPUS_PER_CLUSTER is not set in makefile"
+#endif
+
+#ifndef FVP_MAX_PE_PER_CPU
+#error "FVP_MAX_PE_PER_CPU is not set in makefile"
+#endif
+
+#define FVP_PRIMARY_CPU			0x0
+
+/* Defines for the Interconnect build selection */
+#define FVP_CCI			1
+#define FVP_CCN			2
+
+/******************************************************************************
+ * Definition of platform soc id
+ *****************************************************************************/
+#define FVP_SOC_ID      0
+
+/*******************************************************************************
+ * FVP memory map related constants
+ ******************************************************************************/
+
+#define FLASH1_BASE			UL(0x0c000000)
+#define FLASH1_SIZE			UL(0x04000000)
+
+#define PSRAM_BASE			UL(0x14000000)
+#define PSRAM_SIZE			UL(0x04000000)
+
+#define VRAM_BASE			UL(0x18000000)
+#define VRAM_SIZE			UL(0x02000000)
+
+/* Aggregate of all devices in the first GB */
+#define DEVICE0_BASE			UL(0x20000000)
+#define DEVICE0_SIZE			UL(0x0c200000)
+
+/*
+ *  In case of FVP models with CCN, the CCN register space overlaps into
+ *  the NSRAM area.
+ */
+#if FVP_INTERCONNECT_DRIVER == FVP_CCN
+#define DEVICE1_BASE			UL(0x2e000000)
+#define DEVICE1_SIZE			UL(0x1A00000)
+#else
+#define DEVICE1_BASE			BASE_GICD_BASE
+
+#if GIC_ENABLE_V4_EXTN
+/* GICv4 mapping: GICD + CORE_COUNT * 256KB */
+#define DEVICE1_SIZE			((BASE_GICR_BASE - BASE_GICD_BASE) + \
+					 (PLATFORM_CORE_COUNT * 0x40000))
+#else
+/* GICv2 and GICv3 mapping: GICD + CORE_COUNT * 128KB */
+#define DEVICE1_SIZE			((BASE_GICR_BASE - BASE_GICD_BASE) + \
+					 (PLATFORM_CORE_COUNT * 0x20000))
+#endif /* GIC_ENABLE_V4_EXTN */
+
+#define NSRAM_BASE			UL(0x2e000000)
+#define NSRAM_SIZE			UL(0x10000)
+#endif
+/* Devices in the second GB */
+#define DEVICE2_BASE			UL(0x7fe00000)
+#define DEVICE2_SIZE			UL(0x00200000)
+
+#define PCIE_EXP_BASE			UL(0x40000000)
+#define TZRNG_BASE			UL(0x7fe60000)
+
+/* Non-volatile counters */
+#define TRUSTED_NVCTR_BASE		UL(0x7fe70000)
+#define TFW_NVCTR_BASE			(TRUSTED_NVCTR_BASE + UL(0x0000))
+#define TFW_NVCTR_SIZE			UL(4)
+#define NTFW_CTR_BASE			(TRUSTED_NVCTR_BASE + UL(0x0004))
+#define NTFW_CTR_SIZE			UL(4)
+
+/* Keys */
+#define SOC_KEYS_BASE			UL(0x7fe80000)
+#define TZ_PUB_KEY_HASH_BASE		(SOC_KEYS_BASE + UL(0x0000))
+#define TZ_PUB_KEY_HASH_SIZE		UL(32)
+#define HU_KEY_BASE			(SOC_KEYS_BASE + UL(0x0020))
+#define HU_KEY_SIZE			UL(16)
+#define END_KEY_BASE			(SOC_KEYS_BASE + UL(0x0044))
+#define END_KEY_SIZE			UL(32)
+
+/* Constants to distinguish FVP type */
+#define HBI_BASE_FVP			U(0x020)
+#define REV_BASE_FVP_V0			U(0x0)
+#define REV_BASE_FVP_REVC		U(0x2)
+
+#define HBI_FOUNDATION_FVP		U(0x010)
+#define REV_FOUNDATION_FVP_V2_0		U(0x0)
+#define REV_FOUNDATION_FVP_V2_1		U(0x1)
+#define REV_FOUNDATION_FVP_v9_1		U(0x2)
+#define REV_FOUNDATION_FVP_v9_6		U(0x3)
+
+#define BLD_GIC_VE_MMAP			U(0x0)
+#define BLD_GIC_A53A57_MMAP		U(0x1)
+
+#define ARCH_MODEL			U(0x1)
+
+/* FVP Power controller base address*/
+#define PWRC_BASE			UL(0x1c100000)
+
+/* FVP SP804 timer frequency is 35 MHz*/
+#define SP804_TIMER_CLKMULT		1
+#define SP804_TIMER_CLKDIV		35
+
+/* SP810 controller. FVP specific flags */
+#define FVP_SP810_CTRL_TIM0_OV		BIT_32(16)
+#define FVP_SP810_CTRL_TIM1_OV		BIT_32(18)
+#define FVP_SP810_CTRL_TIM2_OV		BIT_32(20)
+#define FVP_SP810_CTRL_TIM3_OV		BIT_32(22)
+
+/*******************************************************************************
+ * GIC & interrupt handling related constants
+ ******************************************************************************/
+/* VE compatible GIC memory map */
+#define VE_GICD_BASE			UL(0x2c001000)
+#define VE_GICC_BASE			UL(0x2c002000)
+#define VE_GICH_BASE			UL(0x2c004000)
+#define VE_GICV_BASE			UL(0x2c006000)
+
+/* Base FVP compatible GIC memory map */
+#define BASE_GICD_BASE			UL(0x2f000000)
+#define BASE_GICD_SIZE			UL(0x10000)
+#define BASE_GICR_BASE			UL(0x2f100000)
+
+#if GIC_ENABLE_V4_EXTN
+/* GICv4 redistributor size: 256KB */
+#define BASE_GICR_SIZE			UL(0x40000)
+#else
+#define BASE_GICR_SIZE			UL(0x20000)
+#endif /* GIC_ENABLE_V4_EXTN */
+
+#define BASE_GICC_BASE			UL(0x2c000000)
+#define BASE_GICH_BASE			UL(0x2c010000)
+#define BASE_GICV_BASE			UL(0x2c02f000)
+
+#define FVP_IRQ_TZ_WDOG			56
+#define FVP_IRQ_SEC_SYS_TIMER		57
+
+/*******************************************************************************
+ * TrustZone address space controller related constants
+ ******************************************************************************/
+
+/* NSAIDs used by devices in TZC filter 0 on FVP */
+#define FVP_NSAID_DEFAULT		0
+#define FVP_NSAID_PCI			1
+#define FVP_NSAID_VIRTIO		8  /* from FVP v5.6 onwards */
+#define FVP_NSAID_AP			9  /* Application Processors */
+#define FVP_NSAID_VIRTIO_OLD		15 /* until FVP v5.5 */
+
+/* NSAIDs used by devices in TZC filter 2 on FVP */
+#define FVP_NSAID_HDLCD0		2
+#define FVP_NSAID_CLCD			7
+
+/*******************************************************************************
+ * Memprotect definitions
+ ******************************************************************************/
+/* PSCI memory protect definitions:
+ * This variable is stored in a non-secure flash because some ARM reference
+ * platforms do not have secure NVRAM. Real systems that provided MEM_PROTECT
+ * support must use a secure NVRAM to store the PSCI MEM_PROTECT definitions.
+ */
+#define PLAT_ARM_MEM_PROT_ADDR		(V2M_FLASH0_BASE + \
+					 V2M_FLASH0_SIZE - V2M_FLASH_BLOCK_SIZE)
+
+#endif /* FVP_DEF_H */
diff --git a/plat/arm/board/fvp/fvp_drtm_addr.c b/plat/arm/board/fvp/fvp_drtm_addr.c
new file mode 100644
index 0000000..eeaa342
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_drtm_addr.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2022 Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier:    BSD-3-Clause
+ *
+ */
+
+#include <stdint.h>
+
+#include <plat/common/platform.h>
+#include <platform_def.h>
+
+/*******************************************************************************
+ * Check passed region is within Non-Secure region of DRAM
+ ******************************************************************************/
+int plat_drtm_validate_ns_region(uintptr_t region_start,
+				 size_t region_size)
+{
+	uintptr_t region_end = region_start + region_size - 1;
+
+	if (region_start >= region_end) {
+		return -1;
+	} else if ((region_start >= ARM_NS_DRAM1_BASE) &&
+		   (region_start < (ARM_NS_DRAM1_BASE + ARM_NS_DRAM1_SIZE)) &&
+		   (region_end >= ARM_NS_DRAM1_BASE) &&
+		   (region_end < (ARM_NS_DRAM1_BASE + ARM_NS_DRAM1_SIZE))) {
+		return 0;
+	} else if ((region_start >= ARM_DRAM2_BASE) &&
+		   (region_start < (ARM_DRAM2_BASE + ARM_DRAM2_SIZE)) &&
+		   (region_end >= ARM_DRAM2_BASE) &&
+		   (region_end < (ARM_DRAM2_BASE + ARM_DRAM2_SIZE))) {
+		return 0;
+	}
+
+	return -1;
+}
diff --git a/plat/arm/board/fvp/fvp_drtm_dma_prot.c b/plat/arm/board/fvp/fvp_drtm_dma_prot.c
new file mode 100644
index 0000000..38ff7fe
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_drtm_dma_prot.c
@@ -0,0 +1,76 @@
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdbool.h>
+#include <stddef.h>
+
+#include <drivers/arm/smmu_v3.h>
+#include <lib/utils_def.h>
+#include <plat/arm/common/arm_config.h>
+#include <plat/common/platform.h>
+
+#include <platform_def.h>
+
+/**
+ * Array mentioning number of SMMUs supported by FVP
+ */
+static const uintptr_t fvp_smmus[] = {
+	PLAT_FVP_SMMUV3_BASE,
+};
+
+bool plat_has_non_host_platforms(void)
+{
+	/* FVP base platforms typically have GPU, as per FVP Reference guide */
+	return true;
+}
+
+bool plat_has_unmanaged_dma_peripherals(void)
+{
+	/*
+	 * FVP Reference guide does not show devices that are described as
+	 * DMA-capable but not managed by an SMMU in the FVP documentation.
+	 * However, the SMMU seems to have only been introduced in the RevC
+	 * revision.
+	 */
+	return (arm_config.flags & ARM_CONFIG_FVP_HAS_SMMUV3) == 0;
+}
+
+unsigned int plat_get_total_smmus(void)
+{
+	if ((arm_config.flags & ARM_CONFIG_FVP_HAS_SMMUV3) != 0U) {
+		return ARRAY_SIZE(fvp_smmus);
+	} else {
+		return 0;
+	}
+}
+
+void plat_enumerate_smmus(const uintptr_t **smmus_out,
+			  size_t *smmu_count_out)
+{
+	if ((arm_config.flags & ARM_CONFIG_FVP_HAS_SMMUV3) != 0U) {
+		*smmus_out = fvp_smmus;
+		*smmu_count_out = ARRAY_SIZE(fvp_smmus);
+	} else {
+		*smmus_out = NULL;
+		*smmu_count_out = 0;
+	}
+}
+
+/* DRTM DMA Protection Features */
+static const plat_drtm_dma_prot_features_t dma_prot_features = {
+	.max_num_mem_prot_regions = 0, /* No protection regions are present */
+	.dma_protection_support = 0x1 /* Complete DMA protection only */
+};
+
+const plat_drtm_dma_prot_features_t *plat_drtm_get_dma_prot_features(void)
+{
+	return &dma_prot_features;
+}
+
+uint64_t plat_drtm_dma_prot_get_max_table_bytes(void)
+{
+	return 0U;
+}
diff --git a/plat/arm/board/fvp/fvp_drtm_err.c b/plat/arm/board/fvp/fvp_drtm_err.c
new file mode 100644
index 0000000..95259fa
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_drtm_err.c
@@ -0,0 +1,22 @@
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <plat/common/platform.h>
+
+int plat_set_drtm_error(uint64_t error_code)
+{
+	/* TODO: Set DRTM error in NV-storage */
+	return 0;
+}
+
+int plat_get_drtm_error(uint64_t *error_code)
+{
+	/* TODO: Get DRTM error from NV-storage */
+	*error_code = 0;
+	return 0;
+}
diff --git a/plat/arm/board/fvp/fvp_drtm_measurement.c b/plat/arm/board/fvp/fvp_drtm_measurement.c
new file mode 100644
index 0000000..4fbedd8
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_drtm_measurement.c
@@ -0,0 +1,29 @@
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdbool.h>
+#include <stddef.h>
+#include <stdint.h>
+
+#include <drivers/measured_boot/event_log/event_log.h>
+#include <plat/common/platform.h>
+
+#include <platform_def.h>
+
+/* DRTM TPM Features */
+static const plat_drtm_tpm_features_t tpm_features = {
+	/* No TPM-based hashing supported. */
+	.tpm_based_hash_support = false,
+
+	/* Set to decided algorithm by Event Log driver */
+	.firmware_hash_algorithm = TPM_ALG_ID
+
+};
+
+const plat_drtm_tpm_features_t *plat_drtm_get_tpm_features(void)
+{
+	return &tpm_features;
+}
diff --git a/plat/arm/board/fvp/fvp_drtm_stub.c b/plat/arm/board/fvp/fvp_drtm_stub.c
new file mode 100644
index 0000000..e2bc516
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_drtm_stub.c
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+
+#include <stdint.h>
+
+#include <services/drtm_svc.h>
+
+/*
+ * This file contains DRTM platform functions which don't really do anything on
+ * FVP but are needed for DRTM to function.
+ */
+
+uint64_t plat_drtm_get_min_size_normal_world_dce(void)
+{
+	return 0ULL;
+}
+
+uint64_t plat_drtm_get_imp_def_dlme_region_size(void)
+{
+	return 0ULL;
+}
+
+uint64_t plat_drtm_get_tcb_hash_features(void)
+{
+	return 0ULL;
+}
+
+uint64_t plat_drtm_get_tcb_hash_table_size(void)
+{
+	return 0ULL;
+}
diff --git a/plat/arm/board/fvp/fvp_el3_spmc.c b/plat/arm/board/fvp/fvp_el3_spmc.c
new file mode 100644
index 0000000..2b347ed
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_el3_spmc.c
@@ -0,0 +1,47 @@
+/*
+ * Copyright (c) 2022, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#include <services/el3_spmc_ffa_memory.h>
+
+#include <platform_def.h>
+
+/*
+ * On the FVP platform when using the EL3 SPMC implementation allocate the
+ * datastore for tracking shared memory descriptors in the TZC DRAM section
+ * to ensure sufficient storage can be allocated.
+ * Provide an implementation of the accessor method to allow the datastore
+ * details to be retrieved by the SPMC.
+ * The SPMC will take care of initializing the memory region.
+ */
+
+#define PLAT_SPMC_SHMEM_DATASTORE_SIZE 512 * 1024
+
+__section("arm_el3_tzc_dram") static uint8_t
+plat_spmc_shmem_datastore[PLAT_SPMC_SHMEM_DATASTORE_SIZE];
+
+int plat_spmc_shmem_datastore_get(uint8_t **datastore, size_t *size)
+{
+	*datastore = plat_spmc_shmem_datastore;
+	*size = PLAT_SPMC_SHMEM_DATASTORE_SIZE;
+	return 0;
+}
+
+/*
+ * Add dummy implementations of memory management related platform hooks.
+ * These can be used to implement platform specific functionality to support
+ * a memory sharing/lending operation.
+ *
+ * Note: The hooks must be located as part of the initial share request and
+ * final reclaim to prevent order dependencies with operations that may take
+ * place in the normal world without visibility of the SPMC.
+ */
+int plat_spmc_shmem_begin(struct ffa_mtd *desc)
+{
+	return 0;
+}
+int plat_spmc_shmem_reclaim(struct ffa_mtd *desc)
+{
+	return 0;
+}
diff --git a/plat/arm/board/fvp/fvp_el3_spmc_logical_sp.c b/plat/arm/board/fvp/fvp_el3_spmc_logical_sp.c
new file mode 100644
index 0000000..b9e4f86
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_el3_spmc_logical_sp.c
@@ -0,0 +1,61 @@
+/*
+ * Copyright (c) 2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/debug.h>
+#include <services/el3_spmc_logical_sp.h>
+#include <services/ffa_svc.h>
+#include <smccc_helpers.h>
+
+#define LP_PARTITION_ID 0xC001
+#define LP_UUID {0x47a3bf57, 0xe98e43ad, 0xb7db524f, 0x1588f4e3}
+
+/* Our Logical SP currently only supports receipt of direct messaging. */
+#define PARTITION_PROPERTIES FFA_PARTITION_DIRECT_REQ_RECV
+
+static int32_t sp_init(void)
+{
+	INFO("LSP: Init function called.\n");
+	return 0;
+}
+
+static uint64_t handle_ffa_direct_request(uint32_t smc_fid,  bool secure_origin,
+					  uint64_t x1, uint64_t x2, uint64_t x3,
+					  uint64_t x4, void *cookie,
+					  void *handle, uint64_t flags)
+{
+	uint64_t ret;
+
+	/* Determine if we have a 64 or 32 direct request. */
+	if (smc_fid == FFA_MSG_SEND_DIRECT_REQ_SMC32) {
+		ret = FFA_MSG_SEND_DIRECT_RESP_SMC32;
+	} else if (smc_fid == FFA_MSG_SEND_DIRECT_REQ_SMC64) {
+		ret = FFA_MSG_SEND_DIRECT_RESP_SMC64;
+	} else {
+		panic(); /* Unknown SMC. */
+	}
+	/*
+	 * Handle the incoming request. For testing purposes we echo the
+	 * incoming message.
+	 */
+	INFO("Logical Partition: Received Direct Request from %s world!\n",
+	     secure_origin ? "Secure" : "Normal");
+
+	/*
+	 * Logical SP's must always send a direct response so we can populate
+	 * our response directly.
+	 */
+	SMC_RET8(handle, ret, 0, 0, x4, 0, 0, 0, 0);
+}
+
+/* Register logical partition  */
+DECLARE_LOGICAL_PARTITION(
+	my_logical_partition,
+	sp_init,			/* Init Function */
+	LP_PARTITION_ID,		/* FF-A Partition ID */
+	LP_UUID,			/* UUID */
+	PARTITION_PROPERTIES,		/* Partition Properties. */
+	handle_ffa_direct_request	/* Callback for direct requests. */
+);
diff --git a/plat/arm/board/fvp/fvp_err.c b/plat/arm/board/fvp/fvp_err.c
new file mode 100644
index 0000000..244659a
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_err.c
@@ -0,0 +1,43 @@
+/*
+ * Copyright (c) 2019-2021, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+
+#include <common/debug.h>
+#include <drivers/arm/sp805.h>
+#include <drivers/cfi/v2m_flash.h>
+#include <lib/mmio.h>
+#include <plat/arm/common/plat_arm.h>
+#include <platform_def.h>
+
+/*
+ * FVP error handler
+ */
+__dead2 void plat_arm_error_handler(int err)
+{
+	/* Propagate the err code in the NV-flags register */
+	mmio_write_32(V2M_SYS_NVFLAGS_ADDR, (uint32_t)err);
+
+	console_flush();
+
+	/* Setup the watchdog to reset the system as soon as possible */
+	sp805_refresh(ARM_SP805_TWDG_BASE, 1U);
+
+	for (;;)
+		wfi();
+}
+
+void __dead2 plat_arm_system_reset(void)
+{
+	/* Write the System Configuration Control Register */
+	mmio_write_32(V2M_SYSREGS_BASE + V2M_SYS_CFGCTRL,
+		      V2M_CFGCTRL_START |
+		      V2M_CFGCTRL_RW |
+		      V2M_CFGCTRL_FUNC(V2M_FUNC_REBOOT));
+	wfi();
+	ERROR("FVP System Reset: operation not handled.\n");
+	panic();
+}
diff --git a/plat/arm/board/fvp/fvp_gicv3.c b/plat/arm/board/fvp/fvp_gicv3.c
new file mode 100644
index 0000000..e780f21
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_gicv3.c
@@ -0,0 +1,174 @@
+/*
+ * Copyright (c) 2015-2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <platform_def.h>
+
+#include <common/debug.h>
+#include <common/interrupt_props.h>
+#include <drivers/arm/gicv3.h>
+#include <fconf_hw_config_getter.h>
+#include <lib/utils.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/arm/common/fconf_sec_intr_config.h>
+#include <plat/common/platform.h>
+
+#if FVP_GICR_REGION_PROTECTION
+/* To indicate GICR region of the core initialized as Read-Write */
+static bool fvp_gicr_rw_region_init[PLATFORM_CORE_COUNT] = {false};
+#endif /* FVP_GICR_REGION_PROTECTION */
+
+/* The GICv3 driver only needs to be initialized in EL3 */
+static uintptr_t fvp_rdistif_base_addrs[PLATFORM_CORE_COUNT];
+
+/* Default GICR base address to be used for GICR probe. */
+static uint64_t fvp_gicr_base_addrs[2] = { 0U };
+
+/* List of zero terminated GICR frame addresses which CPUs will probe */
+static uint64_t *fvp_gicr_frames = fvp_gicr_base_addrs;
+
+#if  !(SEC_INT_DESC_IN_FCONF && ((!defined(__aarch64__) && defined(IMAGE_BL32)) || \
+	(defined(__aarch64__) && defined(IMAGE_BL31))))
+static const interrupt_prop_t fvp_interrupt_props[] = {
+	PLAT_ARM_G1S_IRQ_PROPS(INTR_GROUP1S),
+	PLAT_ARM_G0_IRQ_PROPS(INTR_GROUP0)
+};
+#endif
+
+/*
+ * MPIDR hashing function for translating MPIDRs read from GICR_TYPER register
+ * to core position.
+ *
+ * Calculating core position is dependent on MPIDR_EL1.MT bit. However, affinity
+ * values read from GICR_TYPER don't have an MT field. To reuse the same
+ * translation used for CPUs, we insert MT bit read from the PE's MPIDR into
+ * that read from GICR_TYPER.
+ *
+ * Assumptions:
+ *
+ *   - All CPUs implemented in the system have MPIDR_EL1.MT bit set;
+ *   - No CPUs implemented in the system use affinity level 3.
+ */
+static unsigned int fvp_gicv3_mpidr_hash(u_register_t mpidr)
+{
+	u_register_t temp_mpidr = mpidr;
+
+	temp_mpidr |= (read_mpidr_el1() & MPIDR_MT_MASK);
+	return plat_arm_calc_core_pos(temp_mpidr);
+}
+
+
+static gicv3_driver_data_t fvp_gic_data = {
+	.rdistif_num = PLATFORM_CORE_COUNT,
+	.rdistif_base_addrs = fvp_rdistif_base_addrs,
+	.mpidr_to_core_pos = fvp_gicv3_mpidr_hash
+};
+
+/******************************************************************************
+ * This function gets called per core to make its redistributor frame rw
+ *****************************************************************************/
+static void fvp_gicv3_make_rdistrif_rw(void)
+{
+#if FVP_GICR_REGION_PROTECTION
+	unsigned int core_pos = plat_my_core_pos();
+
+	/* Make the redistributor frame RW if it is not done previously */
+	if (fvp_gicr_rw_region_init[core_pos] != true) {
+		int ret = xlat_change_mem_attributes(BASE_GICR_BASE +
+						     (core_pos * BASE_GICR_SIZE),
+						     BASE_GICR_SIZE,
+						     MT_EXECUTE_NEVER |
+						     MT_DEVICE | MT_RW |
+						     MT_SECURE);
+
+		if (ret != 0) {
+			ERROR("Failed to make redistributor frame \
+			       read write = %d\n", ret);
+			panic();
+		} else {
+			fvp_gicr_rw_region_init[core_pos] = true;
+		}
+	}
+#else
+	return;
+#endif /* FVP_GICR_REGION_PROTECTION */
+}
+
+void plat_arm_gic_driver_init(void)
+{
+	fvp_gicv3_make_rdistrif_rw();
+	/*
+	 * Get GICD and GICR base addressed through FCONF APIs.
+	 * FCONF is not supported in BL32 for FVP.
+	 */
+#if (!defined(__aarch64__) && defined(IMAGE_BL32)) || \
+	(defined(__aarch64__) && defined(IMAGE_BL31))
+	fvp_gic_data.gicd_base = (uintptr_t)FCONF_GET_PROPERTY(hw_config,
+							       gicv3_config,
+							       gicd_base);
+	fvp_gicr_base_addrs[0] = FCONF_GET_PROPERTY(hw_config, gicv3_config,
+						    gicr_base);
+#if SEC_INT_DESC_IN_FCONF
+	fvp_gic_data.interrupt_props = FCONF_GET_PROPERTY(hw_config,
+					sec_intr_prop, descriptor);
+	fvp_gic_data.interrupt_props_num = FCONF_GET_PROPERTY(hw_config,
+					sec_intr_prop, count);
+#else
+	fvp_gic_data.interrupt_props = fvp_interrupt_props;
+	fvp_gic_data.interrupt_props_num = ARRAY_SIZE(fvp_interrupt_props);
+#endif
+#else
+	fvp_gic_data.gicd_base = PLAT_ARM_GICD_BASE;
+	fvp_gicr_base_addrs[0] = PLAT_ARM_GICR_BASE;
+	fvp_gic_data.interrupt_props = fvp_interrupt_props;
+	fvp_gic_data.interrupt_props_num = ARRAY_SIZE(fvp_interrupt_props);
+#endif
+
+	/*
+	 * The GICv3 driver is initialized in EL3 and does not need
+	 * to be initialized again in SEL1. This is because the S-EL1
+	 * can use GIC system registers to manage interrupts and does
+	 * not need GIC interface base addresses to be configured.
+	 */
+
+#if (!defined(__aarch64__) && defined(IMAGE_BL32)) || \
+	(defined(__aarch64__) && defined(IMAGE_BL31))
+	gicv3_driver_init(&fvp_gic_data);
+	if (gicv3_rdistif_probe((uintptr_t)fvp_gicr_base_addrs[0]) == -1) {
+		ERROR("No GICR base frame found for Primary CPU\n");
+		panic();
+	}
+#endif
+}
+
+/******************************************************************************
+ * Function to iterate over all GICR frames and discover the corresponding
+ * per-cpu redistributor frame as well as initialize the corresponding
+ * interface in GICv3.
+ *****************************************************************************/
+void plat_arm_gic_pcpu_init(void)
+{
+	int result;
+	const uint64_t *plat_gicr_frames = fvp_gicr_frames;
+
+	fvp_gicv3_make_rdistrif_rw();
+
+	do {
+		result = gicv3_rdistif_probe(*plat_gicr_frames);
+
+		/* If the probe is successful, no need to proceed further */
+		if (result == 0)
+			break;
+
+		plat_gicr_frames++;
+	} while (*plat_gicr_frames != 0U);
+
+	if (result == -1) {
+		ERROR("No GICR base frame found for CPU 0x%lx\n", read_mpidr());
+		panic();
+	}
+	gicv3_rdistif_init(plat_my_core_pos());
+}
diff --git a/plat/arm/board/fvp/fvp_io_storage.c b/plat/arm/board/fvp/fvp_io_storage.c
new file mode 100644
index 0000000..4eef51c
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_io_storage.c
@@ -0,0 +1,174 @@
+/*
+ * Copyright (c) 2014-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <common/debug.h>
+#include <drivers/io/io_driver.h>
+#include <drivers/io/io_semihosting.h>
+#include <drivers/io/io_storage.h>
+#include <lib/semihosting.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/common_def.h>
+
+/* Semihosting filenames */
+#define BL2_IMAGE_NAME			"bl2.bin"
+#define BL31_IMAGE_NAME			"bl31.bin"
+#define BL32_IMAGE_NAME			"bl32.bin"
+#define BL33_IMAGE_NAME			"bl33.bin"
+#define TB_FW_CONFIG_NAME		"fvp_tb_fw_config.dtb"
+#define SOC_FW_CONFIG_NAME		"fvp_soc_fw_config.dtb"
+#define TOS_FW_CONFIG_NAME		"fvp_tsp_fw_config.dtb"
+#define NT_FW_CONFIG_NAME		"fvp_nt_fw_config.dtb"
+#define FW_CONFIG_NAME			"fvp_fw_config.dtb"
+#define HW_CONFIG_NAME			"hw_config.dtb"
+
+#if TRUSTED_BOARD_BOOT
+#define TRUSTED_BOOT_FW_CERT_NAME	"tb_fw.crt"
+#define TRUSTED_KEY_CERT_NAME		"trusted_key.crt"
+#define SOC_FW_KEY_CERT_NAME		"soc_fw_key.crt"
+#define TOS_FW_KEY_CERT_NAME		"tos_fw_key.crt"
+#define NT_FW_KEY_CERT_NAME		"nt_fw_key.crt"
+#define SOC_FW_CONTENT_CERT_NAME	"soc_fw_content.crt"
+#define TOS_FW_CONTENT_CERT_NAME	"tos_fw_content.crt"
+#define NT_FW_CONTENT_CERT_NAME		"nt_fw_content.crt"
+#endif /* TRUSTED_BOARD_BOOT */
+
+/* IO devices */
+static const io_dev_connector_t *sh_dev_con;
+static uintptr_t sh_dev_handle;
+
+static const io_file_spec_t sh_file_spec[] = {
+	[BL2_IMAGE_ID] = {
+		.path = BL2_IMAGE_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[BL31_IMAGE_ID] = {
+		.path = BL31_IMAGE_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[BL32_IMAGE_ID] = {
+		.path = BL32_IMAGE_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[BL33_IMAGE_ID] = {
+		.path = BL33_IMAGE_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[TB_FW_CONFIG_ID] = {
+		.path = TB_FW_CONFIG_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[SOC_FW_CONFIG_ID] = {
+		.path = SOC_FW_CONFIG_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[TOS_FW_CONFIG_ID] = {
+		.path = TOS_FW_CONFIG_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[NT_FW_CONFIG_ID] = {
+		.path = NT_FW_CONFIG_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[FW_CONFIG_ID] = {
+		.path = FW_CONFIG_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[HW_CONFIG_ID] = {
+		.path = HW_CONFIG_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+#if TRUSTED_BOARD_BOOT
+	[TRUSTED_BOOT_FW_CERT_ID] = {
+		.path = TRUSTED_BOOT_FW_CERT_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[TRUSTED_KEY_CERT_ID] = {
+		.path = TRUSTED_KEY_CERT_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[SOC_FW_KEY_CERT_ID] = {
+		.path = SOC_FW_KEY_CERT_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[TRUSTED_OS_FW_KEY_CERT_ID] = {
+		.path = TOS_FW_KEY_CERT_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[NON_TRUSTED_FW_KEY_CERT_ID] = {
+		.path = NT_FW_KEY_CERT_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[SOC_FW_CONTENT_CERT_ID] = {
+		.path = SOC_FW_CONTENT_CERT_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[TRUSTED_OS_FW_CONTENT_CERT_ID] = {
+		.path = TOS_FW_CONTENT_CERT_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+	[NON_TRUSTED_FW_CONTENT_CERT_ID] = {
+		.path = NT_FW_CONTENT_CERT_NAME,
+		.mode = FOPEN_MODE_RB
+	},
+#endif /* TRUSTED_BOARD_BOOT */
+};
+
+
+static int open_semihosting(const uintptr_t spec)
+{
+	int result;
+	uintptr_t local_image_handle;
+
+	/* See if the file exists on semi-hosting.*/
+	result = io_dev_init(sh_dev_handle, (uintptr_t)NULL);
+	if (result == 0) {
+		result = io_open(sh_dev_handle, spec, &local_image_handle);
+		if (result == 0) {
+			VERBOSE("Using Semi-hosting IO\n");
+			io_close(local_image_handle);
+		}
+	}
+	return result;
+}
+
+void plat_arm_io_setup(void)
+{
+	int io_result;
+
+	io_result = arm_io_setup();
+	if (io_result < 0) {
+		panic();
+	}
+
+	/* Register the additional IO devices on this platform */
+	io_result = register_io_dev_sh(&sh_dev_con);
+	if (io_result < 0) {
+		panic();
+	}
+
+	/* Open connections to devices and cache the handles */
+	io_result = io_dev_open(sh_dev_con, (uintptr_t)NULL, &sh_dev_handle);
+	if (io_result < 0) {
+		panic();
+	}
+}
+
+/*
+ * FVP provides semihosting as an alternative to load images
+ */
+int plat_arm_get_alt_image_source(unsigned int image_id, uintptr_t *dev_handle,
+				  uintptr_t *image_spec)
+{
+	int result = open_semihosting((const uintptr_t)&sh_file_spec[image_id]);
+	if (result == 0) {
+		*dev_handle = sh_dev_handle;
+		*image_spec = (uintptr_t)&sh_file_spec[image_id];
+	}
+
+	return result;
+}
diff --git a/plat/arm/board/fvp/fvp_plat_attest_token.c b/plat/arm/board/fvp/fvp_plat_attest_token.c
new file mode 100644
index 0000000..4dd37a4
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_plat_attest_token.c
@@ -0,0 +1,111 @@
+/*
+ * Copyright (c) 2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+#include <stdint.h>
+#include <string.h>
+
+/* Using hardcoded token values for AEM FVP */
+static uint8_t platform_token[] = {
+	0xD2, 0x84, 0x40, 0xA0, 0x59, 0x02, 0x46, 0xA9,
+	0x19, 0x01, 0x09, 0x78, 0x1C, 0x68, 0x74, 0x74,
+	0x70, 0x3A, 0x2F, 0x2F, 0x61, 0x72, 0x6D, 0x2E,
+	0x63, 0x6F, 0x6D, 0x2F, 0x43, 0x43, 0x41, 0x2D,
+	0x53, 0x53, 0x44, 0x2F, 0x31, 0x2E, 0x30, 0x2E,
+	0x30, 0x0A, 0x58, 0x20, 0x07, 0x06, 0x05, 0x04,
+	0x03, 0x02, 0x01, 0x00, 0x0F, 0x0E, 0x0D, 0x0C,
+	0x0B, 0x0A, 0x09, 0x08, 0x17, 0x16, 0x15, 0x14,
+	0x13, 0x12, 0x11, 0x10, 0x1F, 0x1E, 0x1D, 0x1C,
+	0x1B, 0x1A, 0x19, 0x18, 0x19, 0x09, 0x5C, 0x58,
+	0x40, 0x7F, 0x45, 0x4C, 0x46, 0x02, 0x01, 0x01,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x03, 0x00, 0x3E, 0x00, 0x01, 0x00, 0x00,
+	0x00, 0x50, 0x58, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x40, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0xA0, 0x03, 0x02, 0x00, 0x00, 0x00, 0x00,
+	0x00, 0x00, 0x00, 0x00, 0x00, 0x40, 0x00, 0x38,
+	0x00, 0x09, 0x00, 0x40, 0x00, 0x1C, 0x00, 0x1B,
+	0x00, 0x19, 0x01, 0x00, 0x58, 0x21, 0x01, 0x07,
+	0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x0F,
+	0x0E, 0x0D, 0x0C, 0x0B, 0x0A, 0x09, 0x08, 0x17,
+	0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x1F,
+	0x1E, 0x1D, 0x1C, 0x1B, 0x1A, 0x19, 0x18, 0x19,
+	0x09, 0x61, 0x58, 0x21, 0x01, 0x07, 0x06, 0x05,
+	0x04, 0x03, 0x02, 0x01, 0x00, 0x0F, 0x0E, 0x0D,
+	0x0C, 0x0B, 0x0A, 0x09, 0x08, 0x17, 0x16, 0x15,
+	0x14, 0x13, 0x12, 0x11, 0x10, 0x1F, 0x1E, 0x1D,
+	0x1C, 0x1B, 0x1A, 0x19, 0x18, 0x19, 0x09, 0x5B,
+	0x19, 0x30, 0x03, 0x19, 0x09, 0x62, 0x67, 0x73,
+	0x68, 0x61, 0x2D, 0x32, 0x35, 0x36, 0x19, 0x09,
+	0x5F, 0x84, 0xA5, 0x01, 0x62, 0x42, 0x4C, 0x05,
+	0x58, 0x20, 0x07, 0x06, 0x05, 0x04, 0x03, 0x02,
+	0x01, 0x00, 0x0F, 0x0E, 0x0D, 0x0C, 0x0B, 0x0A,
+	0x09, 0x08, 0x17, 0x16, 0x15, 0x14, 0x13, 0x12,
+	0x11, 0x10, 0x1F, 0x1E, 0x1D, 0x1C, 0x1B, 0x1A,
+	0x19, 0x18, 0x04, 0x65, 0x33, 0x2E, 0x34, 0x2E,
+	0x32, 0x02, 0x58, 0x20, 0x07, 0x06, 0x05, 0x04,
+	0x03, 0x02, 0x01, 0x00, 0x0F, 0x0E, 0x0D, 0x0C,
+	0x0B, 0x0A, 0x09, 0x08, 0x17, 0x16, 0x15, 0x14,
+	0x13, 0x12, 0x11, 0x10, 0x1F, 0x1E, 0x1D, 0x1C,
+	0x1B, 0x1A, 0x19, 0x18, 0x06, 0x67, 0x73, 0x68,
+	0x61, 0x2D, 0x32, 0x35, 0x36, 0xA4, 0x01, 0x62,
+	0x4D, 0x31, 0x05, 0x58, 0x20, 0x07, 0x06, 0x05,
+	0x04, 0x03, 0x02, 0x01, 0x00, 0x0F, 0x0E, 0x0D,
+	0x0C, 0x0B, 0x0A, 0x09, 0x08, 0x17, 0x16, 0x15,
+	0x14, 0x13, 0x12, 0x11, 0x10, 0x1F, 0x1E, 0x1D,
+	0x1C, 0x1B, 0x1A, 0x19, 0x18, 0x04, 0x63, 0x31,
+	0x2E, 0x32, 0x02, 0x58, 0x20, 0x07, 0x06, 0x05,
+	0x04, 0x03, 0x02, 0x01, 0x00, 0x0F, 0x0E, 0x0D,
+	0x0C, 0x0B, 0x0A, 0x09, 0x08, 0x17, 0x16, 0x15,
+	0x14, 0x13, 0x12, 0x11, 0x10, 0x1F, 0x1E, 0x1D,
+	0x1C, 0x1B, 0x1A, 0x19, 0x18, 0xA4, 0x01, 0x62,
+	0x4D, 0x32, 0x05, 0x58, 0x20, 0x07, 0x06, 0x05,
+	0x04, 0x03, 0x02, 0x01, 0x00, 0x0F, 0x0E, 0x0D,
+	0x0C, 0x0B, 0x0A, 0x09, 0x08, 0x17, 0x16, 0x15,
+	0x14, 0x13, 0x12, 0x11, 0x10, 0x1F, 0x1E, 0x1D,
+	0x1C, 0x1B, 0x1A, 0x19, 0x18, 0x04, 0x65, 0x31,
+	0x2E, 0x32, 0x2E, 0x33, 0x02, 0x58, 0x20, 0x07,
+	0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x0F,
+	0x0E, 0x0D, 0x0C, 0x0B, 0x0A, 0x09, 0x08, 0x17,
+	0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x1F,
+	0x1E, 0x1D, 0x1C, 0x1B, 0x1A, 0x19, 0x18, 0xA4,
+	0x01, 0x62, 0x4D, 0x33, 0x05, 0x58, 0x20, 0x07,
+	0x06, 0x05, 0x04, 0x03, 0x02, 0x01, 0x00, 0x0F,
+	0x0E, 0x0D, 0x0C, 0x0B, 0x0A, 0x09, 0x08, 0x17,
+	0x16, 0x15, 0x14, 0x13, 0x12, 0x11, 0x10, 0x1F,
+	0x1E, 0x1D, 0x1C, 0x1B, 0x1A, 0x19, 0x18, 0x04,
+	0x61, 0x31, 0x02, 0x58, 0x20, 0x07, 0x06, 0x05,
+	0x04, 0x03, 0x02, 0x01, 0x00, 0x0F, 0x0E, 0x0D,
+	0x0C, 0x0B, 0x0A, 0x09, 0x08, 0x17, 0x16, 0x15,
+	0x14, 0x13, 0x12, 0x11, 0x10, 0x1F, 0x1E, 0x1D,
+	0x1C, 0x1B, 0x1A, 0x19, 0x18, 0x19, 0x09, 0x60,
+	0x6C, 0x77, 0x68, 0x61, 0x74, 0x65, 0x76, 0x65,
+	0x72, 0x2E, 0x63, 0x6F, 0x6D, 0x58, 0x40, 0x84,
+	0x32, 0x12, 0x5B, 0x92, 0x6B, 0x20, 0xD8, 0x14,
+	0xC1, 0xC1, 0x8C, 0x3C, 0x73, 0xB8, 0x29, 0x0F,
+	0x42, 0xBC, 0x0B, 0x25, 0x87, 0x5C, 0x4F, 0xA4,
+	0xFA, 0xD9, 0xDE, 0xC1, 0x2B, 0x20, 0xED, 0xDF,
+	0x1C, 0xDD, 0x1A, 0x09, 0xBD, 0xA0, 0x25, 0x48,
+	0xC6, 0xBB, 0x99, 0xA1, 0x30, 0x4F, 0x2C, 0xDC,
+	0x89, 0xE8, 0xB7, 0xFF, 0x32, 0xE9, 0x3F, 0xBB,
+	0xC6, 0xBF, 0x9D, 0x38, 0x68, 0xE1, 0xB2,
+};
+
+int plat_rmmd_get_cca_attest_token(uintptr_t buf, size_t *len,
+				   uintptr_t hash, size_t hash_size)
+{
+	(void)hash;
+	(void)hash_size;
+
+	if (*len < sizeof(platform_token)) {
+		return -EINVAL;
+	}
+
+	(void)memcpy((void *)buf, platform_token, sizeof(platform_token));
+	*len = sizeof(platform_token);
+
+	return 0;
+}
diff --git a/plat/arm/board/fvp/fvp_pm.c b/plat/arm/board/fvp/fvp_pm.c
new file mode 100644
index 0000000..6b9d618
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_pm.c
@@ -0,0 +1,467 @@
+/*
+ * Copyright (c) 2013-2021, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/arm/gicv3.h>
+#include <drivers/arm/fvp/fvp_pwrc.h>
+#include <lib/extensions/spe.h>
+#include <lib/mmio.h>
+#include <lib/psci/psci.h>
+#include <plat/arm/common/arm_config.h>
+#include <plat/arm/common/plat_arm.h>
+#include <platform_def.h>
+
+#include "fvp_private.h"
+#include "../drivers/arm/gic/v3/gicv3_private.h"
+
+
+#if ARM_RECOM_STATE_ID_ENC
+/*
+ *  The table storing the valid idle power states. Ensure that the
+ *  array entries are populated in ascending order of state-id to
+ *  enable us to use binary search during power state validation.
+ *  The table must be terminated by a NULL entry.
+ */
+const unsigned int arm_pm_idle_states[] = {
+	/* State-id - 0x01 */
+	arm_make_pwrstate_lvl1(ARM_LOCAL_STATE_RUN, ARM_LOCAL_STATE_RET,
+			ARM_PWR_LVL0, PSTATE_TYPE_STANDBY),
+	/* State-id - 0x02 */
+	arm_make_pwrstate_lvl1(ARM_LOCAL_STATE_RUN, ARM_LOCAL_STATE_OFF,
+			ARM_PWR_LVL0, PSTATE_TYPE_POWERDOWN),
+	/* State-id - 0x22 */
+	arm_make_pwrstate_lvl1(ARM_LOCAL_STATE_OFF, ARM_LOCAL_STATE_OFF,
+			ARM_PWR_LVL1, PSTATE_TYPE_POWERDOWN),
+	/* State-id - 0x222 */
+	arm_make_pwrstate_lvl2(ARM_LOCAL_STATE_OFF, ARM_LOCAL_STATE_OFF,
+		ARM_LOCAL_STATE_OFF, ARM_PWR_LVL2, PSTATE_TYPE_POWERDOWN),
+	0,
+};
+#endif
+
+/*******************************************************************************
+ * Function which implements the common FVP specific operations to power down a
+ * cluster in response to a CPU_OFF or CPU_SUSPEND request.
+ ******************************************************************************/
+static void fvp_cluster_pwrdwn_common(void)
+{
+	uint64_t mpidr = read_mpidr_el1();
+
+#if ENABLE_SPE_FOR_LOWER_ELS
+	/*
+	 * On power down we need to disable statistical profiling extensions
+	 * before exiting coherency.
+	 */
+	spe_disable();
+#endif
+
+	/* Disable coherency if this cluster is to be turned off */
+	fvp_interconnect_disable();
+
+#if HW_ASSISTED_COHERENCY
+	uint32_t reg;
+
+	/*
+	 * If we have determined this core to be the last man standing and we
+	 * intend to power down the cluster proactively, we provide a hint to
+	 * the power controller that cluster power is not required when all
+	 * cores are powered down.
+	 * Note that this is only an advisory to power controller and is supported
+	 * by SoCs with DynamIQ Shared Units only.
+	 */
+	reg = read_clusterpwrdn();
+
+	/* Clear and set bit 0 : Cluster power not required */
+	reg &= ~DSU_CLUSTER_PWR_MASK;
+	reg |= DSU_CLUSTER_PWR_OFF;
+	write_clusterpwrdn(reg);
+#endif
+
+	/* Program the power controller to turn the cluster off */
+	fvp_pwrc_write_pcoffr(mpidr);
+}
+
+/*
+ * Empty implementation of these hooks avoid setting the GICR_WAKER.Sleep bit
+ * on ARM GICv3 implementations on FVP. This is required, because FVP does not
+ * support SYSTEM_SUSPEND and it is `faked` in firmware. Hence, for wake up
+ * from `fake` system suspend the GIC must not be powered off.
+ */
+void arm_gicv3_distif_pre_save(unsigned int rdist_proc_num)
+{}
+
+void arm_gicv3_distif_post_restore(unsigned int rdist_proc_num)
+{}
+
+static void fvp_power_domain_on_finish_common(const psci_power_state_t *target_state)
+{
+	unsigned long mpidr;
+
+	assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
+					ARM_LOCAL_STATE_OFF);
+
+	/* Get the mpidr for this cpu */
+	mpidr = read_mpidr_el1();
+
+	/* Perform the common cluster specific operations */
+	if (target_state->pwr_domain_state[ARM_PWR_LVL1] ==
+					ARM_LOCAL_STATE_OFF) {
+		/*
+		 * This CPU might have woken up whilst the cluster was
+		 * attempting to power down. In this case the FVP power
+		 * controller will have a pending cluster power off request
+		 * which needs to be cleared by writing to the PPONR register.
+		 * This prevents the power controller from interpreting a
+		 * subsequent entry of this cpu into a simple wfi as a power
+		 * down request.
+		 */
+		fvp_pwrc_write_pponr(mpidr);
+
+		/* Enable coherency if this cluster was off */
+		fvp_interconnect_enable();
+	}
+	/* Perform the common system specific operations */
+	if (target_state->pwr_domain_state[ARM_PWR_LVL2] ==
+						ARM_LOCAL_STATE_OFF)
+		arm_system_pwr_domain_resume();
+
+	/*
+	 * Clear PWKUPR.WEN bit to ensure interrupts do not interfere
+	 * with a cpu power down unless the bit is set again
+	 */
+	fvp_pwrc_clr_wen(mpidr);
+}
+
+/*******************************************************************************
+ * FVP handler called when a CPU is about to enter standby.
+ ******************************************************************************/
+static void fvp_cpu_standby(plat_local_state_t cpu_state)
+{
+	u_register_t scr = read_scr_el3();
+
+	assert(cpu_state == ARM_LOCAL_STATE_RET);
+
+	/*
+	 * Enable the Non-secure interrupt to wake the CPU.
+	 * In GICv3 affinity routing mode, the Non-secure Group 1 interrupts
+	 * use Physical FIQ at EL3 whereas in GICv2, Physical IRQ is used.
+	 * Enabling both the bits works for both GICv2 mode and GICv3 affinity
+	 * routing mode.
+	 */
+	write_scr_el3(scr | SCR_IRQ_BIT | SCR_FIQ_BIT);
+	isb();
+
+	/*
+	 * Enter standby state.
+	 * dsb is good practice before using wfi to enter low power states.
+	 */
+	dsb();
+	wfi();
+
+	/*
+	 * Restore SCR_EL3 to the original value, synchronisation of SCR_EL3
+	 * is done by eret in el3_exit() to save some execution cycles.
+	 */
+	write_scr_el3(scr);
+}
+
+/*******************************************************************************
+ * FVP handler called when a power domain is about to be turned on. The
+ * mpidr determines the CPU to be turned on.
+ ******************************************************************************/
+static int fvp_pwr_domain_on(u_register_t mpidr)
+{
+	int rc = PSCI_E_SUCCESS;
+	unsigned int psysr;
+
+	/*
+	 * Ensure that we do not cancel an inflight power off request for the
+	 * target cpu. That would leave it in a zombie wfi. Wait for it to power
+	 * off and then program the power controller to turn that CPU on.
+	 */
+	do {
+		psysr = fvp_pwrc_read_psysr(mpidr);
+	} while ((psysr & PSYSR_AFF_L0) != 0U);
+
+	fvp_pwrc_write_pponr(mpidr);
+	return rc;
+}
+
+/*******************************************************************************
+ * FVP handler called when a power domain is about to be turned off. The
+ * target_state encodes the power state that each level should transition to.
+ ******************************************************************************/
+static void fvp_pwr_domain_off(const psci_power_state_t *target_state)
+{
+	assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
+					ARM_LOCAL_STATE_OFF);
+
+	/*
+	 * If execution reaches this stage then this power domain will be
+	 * suspended. Perform at least the cpu specific actions followed
+	 * by the cluster specific operations if applicable.
+	 */
+
+	/* Prevent interrupts from spuriously waking up this cpu */
+	plat_arm_gic_cpuif_disable();
+
+	/* Turn redistributor off */
+	plat_arm_gic_redistif_off();
+
+	/* Program the power controller to power off this cpu. */
+	fvp_pwrc_write_ppoffr(read_mpidr_el1());
+
+	if (target_state->pwr_domain_state[ARM_PWR_LVL1] ==
+					ARM_LOCAL_STATE_OFF)
+		fvp_cluster_pwrdwn_common();
+
+}
+
+/*******************************************************************************
+ * FVP handler called when a power domain is about to be suspended. The
+ * target_state encodes the power state that each level should transition to.
+ ******************************************************************************/
+static void fvp_pwr_domain_suspend(const psci_power_state_t *target_state)
+{
+	unsigned long mpidr;
+
+	/*
+	 * FVP has retention only at cpu level. Just return
+	 * as nothing is to be done for retention.
+	 */
+	if (target_state->pwr_domain_state[ARM_PWR_LVL0] ==
+					ARM_LOCAL_STATE_RET)
+		return;
+
+	assert(target_state->pwr_domain_state[ARM_PWR_LVL0] ==
+					ARM_LOCAL_STATE_OFF);
+
+	/* Get the mpidr for this cpu */
+	mpidr = read_mpidr_el1();
+
+	/* Program the power controller to enable wakeup interrupts. */
+	fvp_pwrc_set_wen(mpidr);
+
+	/* Prevent interrupts from spuriously waking up this cpu */
+	plat_arm_gic_cpuif_disable();
+
+	/*
+	 * The Redistributor is not powered off as it can potentially prevent
+	 * wake up events reaching the CPUIF and/or might lead to losing
+	 * register context.
+	 */
+
+	/* Perform the common cluster specific operations */
+	if (target_state->pwr_domain_state[ARM_PWR_LVL1] ==
+					ARM_LOCAL_STATE_OFF)
+		fvp_cluster_pwrdwn_common();
+
+	/* Perform the common system specific operations */
+	if (target_state->pwr_domain_state[ARM_PWR_LVL2] ==
+						ARM_LOCAL_STATE_OFF)
+		arm_system_pwr_domain_save();
+
+	/* Program the power controller to power off this cpu. */
+	fvp_pwrc_write_ppoffr(read_mpidr_el1());
+}
+
+/*******************************************************************************
+ * FVP handler called when a power domain has just been powered on after
+ * being turned off earlier. The target_state encodes the low power state that
+ * each level has woken up from.
+ ******************************************************************************/
+static void fvp_pwr_domain_on_finish(const psci_power_state_t *target_state)
+{
+	fvp_power_domain_on_finish_common(target_state);
+
+}
+
+/*******************************************************************************
+ * FVP handler called when a power domain has just been powered on and the cpu
+ * and its cluster are fully participating in coherent transaction on the
+ * interconnect. Data cache must be enabled for CPU at this point.
+ ******************************************************************************/
+static void fvp_pwr_domain_on_finish_late(const psci_power_state_t *target_state)
+{
+	/* Program GIC per-cpu distributor or re-distributor interface */
+	plat_arm_gic_pcpu_init();
+
+	/* Enable GIC CPU interface */
+	plat_arm_gic_cpuif_enable();
+}
+
+/*******************************************************************************
+ * FVP handler called when a power domain has just been powered on after
+ * having been suspended earlier. The target_state encodes the low power state
+ * that each level has woken up from.
+ * TODO: At the moment we reuse the on finisher and reinitialize the secure
+ * context. Need to implement a separate suspend finisher.
+ ******************************************************************************/
+static void fvp_pwr_domain_suspend_finish(const psci_power_state_t *target_state)
+{
+	/*
+	 * Nothing to be done on waking up from retention from CPU level.
+	 */
+	if (target_state->pwr_domain_state[ARM_PWR_LVL0] ==
+					ARM_LOCAL_STATE_RET)
+		return;
+
+	fvp_power_domain_on_finish_common(target_state);
+
+	/* Enable GIC CPU interface */
+	plat_arm_gic_cpuif_enable();
+}
+
+/*******************************************************************************
+ * FVP handlers to shutdown/reboot the system
+ ******************************************************************************/
+static void __dead2 fvp_system_off(void)
+{
+	/* Write the System Configuration Control Register */
+	mmio_write_32(V2M_SYSREGS_BASE + V2M_SYS_CFGCTRL,
+		V2M_CFGCTRL_START |
+		V2M_CFGCTRL_RW |
+		V2M_CFGCTRL_FUNC(V2M_FUNC_SHUTDOWN));
+	wfi();
+	ERROR("FVP System Off: operation not handled.\n");
+	panic();
+}
+
+static void __dead2 fvp_system_reset(void)
+{
+	/* Write the System Configuration Control Register */
+	mmio_write_32(V2M_SYSREGS_BASE + V2M_SYS_CFGCTRL,
+		V2M_CFGCTRL_START |
+		V2M_CFGCTRL_RW |
+		V2M_CFGCTRL_FUNC(V2M_FUNC_REBOOT));
+	wfi();
+	ERROR("FVP System Reset: operation not handled.\n");
+	panic();
+}
+
+static int fvp_node_hw_state(u_register_t target_cpu,
+			     unsigned int power_level)
+{
+	unsigned int psysr;
+	int ret;
+
+	/*
+	 * The format of 'power_level' is implementation-defined, but 0 must
+	 * mean a CPU. We also allow 1 to denote the cluster
+	 */
+	if ((power_level != ARM_PWR_LVL0) && (power_level != ARM_PWR_LVL1))
+		return PSCI_E_INVALID_PARAMS;
+
+	/*
+	 * Read the status of the given MPDIR from FVP power controller. The
+	 * power controller only gives us on/off status, so map that to expected
+	 * return values of the PSCI call
+	 */
+	psysr = fvp_pwrc_read_psysr(target_cpu);
+	if (psysr == PSYSR_INVALID)
+		return PSCI_E_INVALID_PARAMS;
+
+	if (power_level == ARM_PWR_LVL0) {
+		ret = ((psysr & PSYSR_AFF_L0) != 0U) ? HW_ON : HW_OFF;
+	} else {
+		/* power_level == ARM_PWR_LVL1 */
+		ret = ((psysr & PSYSR_AFF_L1) != 0U) ? HW_ON : HW_OFF;
+	}
+
+	return ret;
+}
+
+/*
+ * The FVP doesn't truly support power management at SYSTEM power domain. The
+ * SYSTEM_SUSPEND will be down-graded to the cluster level within the platform
+ * layer. The `fake` SYSTEM_SUSPEND allows us to validate some of the driver
+ * save and restore sequences on FVP.
+ */
+#if !ARM_BL31_IN_DRAM
+static void fvp_get_sys_suspend_power_state(psci_power_state_t *req_state)
+{
+	unsigned int i;
+
+	for (i = ARM_PWR_LVL0; i <= PLAT_MAX_PWR_LVL; i++)
+		req_state->pwr_domain_state[i] = ARM_LOCAL_STATE_OFF;
+}
+#endif
+
+/*******************************************************************************
+ * Handler to filter PSCI requests.
+ ******************************************************************************/
+/*
+ * The system power domain suspend is only supported only via
+ * PSCI SYSTEM_SUSPEND API. PSCI CPU_SUSPEND request to system power domain
+ * will be downgraded to the lower level.
+ */
+static int fvp_validate_power_state(unsigned int power_state,
+			    psci_power_state_t *req_state)
+{
+	int rc;
+	rc = arm_validate_power_state(power_state, req_state);
+
+	/*
+	 * Ensure that the system power domain level is never suspended
+	 * via PSCI CPU SUSPEND API. Currently system suspend is only
+	 * supported via PSCI SYSTEM SUSPEND API.
+	 */
+	req_state->pwr_domain_state[ARM_PWR_LVL2] = ARM_LOCAL_STATE_RUN;
+	return rc;
+}
+
+/*
+ * Custom `translate_power_state_by_mpidr` handler for FVP. Unlike in the
+ * `fvp_validate_power_state`, we do not downgrade the system power
+ * domain level request in `power_state` as it will be used to query the
+ * PSCI_STAT_COUNT/RESIDENCY at the system power domain level.
+ */
+static int fvp_translate_power_state_by_mpidr(u_register_t mpidr,
+		unsigned int power_state,
+		psci_power_state_t *output_state)
+{
+	return arm_validate_power_state(power_state, output_state);
+}
+
+/*******************************************************************************
+ * Export the platform handlers via plat_arm_psci_pm_ops. The ARM Standard
+ * platform layer will take care of registering the handlers with PSCI.
+ ******************************************************************************/
+plat_psci_ops_t plat_arm_psci_pm_ops = {
+	.cpu_standby = fvp_cpu_standby,
+	.pwr_domain_on = fvp_pwr_domain_on,
+	.pwr_domain_off = fvp_pwr_domain_off,
+	.pwr_domain_suspend = fvp_pwr_domain_suspend,
+	.pwr_domain_on_finish = fvp_pwr_domain_on_finish,
+	.pwr_domain_on_finish_late = fvp_pwr_domain_on_finish_late,
+	.pwr_domain_suspend_finish = fvp_pwr_domain_suspend_finish,
+	.system_off = fvp_system_off,
+	.system_reset = fvp_system_reset,
+	.validate_power_state = fvp_validate_power_state,
+	.validate_ns_entrypoint = arm_validate_psci_entrypoint,
+	.translate_power_state_by_mpidr = fvp_translate_power_state_by_mpidr,
+	.get_node_hw_state = fvp_node_hw_state,
+#if !ARM_BL31_IN_DRAM
+	/*
+	 * The TrustZone Controller is set up during the warmboot sequence after
+	 * resuming the CPU from a SYSTEM_SUSPEND. If BL31 is located in SRAM
+	 * this is  not a problem but, if it is in TZC-secured DRAM, it tries to
+	 * reconfigure the same memory it is running on, causing an exception.
+	 */
+	.get_sys_suspend_power_state = fvp_get_sys_suspend_power_state,
+#endif
+	.mem_protect_chk	= arm_psci_mem_protect_chk,
+	.read_mem_protect	= arm_psci_read_mem_protect,
+	.write_mem_protect	= arm_nor_psci_write_mem_protect,
+};
+
+const plat_psci_ops_t *plat_arm_psci_override_pm_ops(plat_psci_ops_t *ops)
+{
+	return ops;
+}
diff --git a/plat/arm/board/fvp/fvp_private.h b/plat/arm/board/fvp/fvp_private.h
new file mode 100644
index 0000000..3590370
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_private.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2014-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FVP_PRIVATE_H
+#define FVP_PRIVATE_H
+
+#include <plat/arm/common/plat_arm.h>
+
+/*******************************************************************************
+ * Function and variable prototypes
+ ******************************************************************************/
+
+void fvp_config_setup(void);
+
+void fvp_interconnect_init(void);
+void fvp_interconnect_enable(void);
+void fvp_interconnect_disable(void);
+void fvp_timer_init(void);
+void tsp_early_platform_setup(void);
+
+#endif /* FVP_PRIVATE_H */
diff --git a/plat/arm/board/fvp/fvp_realm_attest_key.c b/plat/arm/board/fvp/fvp_realm_attest_key.c
new file mode 100644
index 0000000..1af1f0d
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_realm_attest_key.c
@@ -0,0 +1,36 @@
+/*
+ * Copyright (c) 2022, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <stddef.h>
+#include <stdint.h>
+#include <string.h>
+#include <services/rmmd_svc.h>
+
+static uint8_t sample_attest_priv_key[] = {
+	0x20, 0x11, 0xC7, 0xF0, 0x3C, 0xEE, 0x43, 0x25, 0x17, 0x6E,
+	0x52, 0x4F, 0x03, 0x3C, 0x0C, 0xE1, 0xE2, 0x1A, 0x76, 0xE6,
+	0xC1, 0xA4, 0xF0, 0xB8, 0x39, 0xAA, 0x1D, 0xF6, 0x1E, 0x0E,
+	0x8A, 0x5C, 0x8A, 0x05, 0x74, 0x0F, 0x9B, 0x69, 0xEF, 0xA7,
+	0xEB, 0x1A, 0x41, 0x85, 0xBD, 0x11, 0x7F, 0x68
+};
+
+int plat_rmmd_get_cca_realm_attest_key(uintptr_t buf, size_t *len,
+				       unsigned int type)
+{
+	assert(type == ATTEST_KEY_CURVE_ECC_SECP384R1);
+
+	if (*len < sizeof(sample_attest_priv_key)) {
+		return -EINVAL;
+	}
+
+	(void)memcpy((void *)buf, sample_attest_priv_key,
+		     sizeof(sample_attest_priv_key));
+	*len = sizeof(sample_attest_priv_key);
+
+	return 0;
+}
diff --git a/plat/arm/board/fvp/fvp_security.c b/plat/arm/board/fvp/fvp_security.c
new file mode 100644
index 0000000..573d92e
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_security.c
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2014-2022, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat/arm/common/arm_config.h>
+#include <plat/arm/common/plat_arm.h>
+#include <platform_def.h>
+
+/*
+ * We assume that all security programming is done by the primary core.
+ */
+void plat_arm_security_setup(void)
+{
+	/*
+	 * The Base FVP has a TrustZone address space controller, the Foundation
+	 * FVP does not. Trying to program the device on the foundation FVP will
+	 * cause an abort.
+	 *
+	 * If the platform had additional peripheral specific security
+	 * configurations, those would be configured here.
+	 */
+
+	const arm_tzc_regions_info_t fvp_tzc_regions[] = {
+		ARM_TZC_REGIONS_DEF,
+#if !SPM_MM && !ENABLE_RME
+		{FVP_DRAM3_BASE, FVP_DRAM3_END,
+		 ARM_TZC_NS_DRAM_S_ACCESS, PLAT_ARM_TZC_NS_DEV_ACCESS},
+		{FVP_DRAM4_BASE, FVP_DRAM4_END,
+		 ARM_TZC_NS_DRAM_S_ACCESS, PLAT_ARM_TZC_NS_DEV_ACCESS},
+		{FVP_DRAM5_BASE, FVP_DRAM5_END,
+		 ARM_TZC_NS_DRAM_S_ACCESS, PLAT_ARM_TZC_NS_DEV_ACCESS},
+		{FVP_DRAM6_BASE, FVP_DRAM6_END,
+		 ARM_TZC_NS_DRAM_S_ACCESS, PLAT_ARM_TZC_NS_DEV_ACCESS},
+#endif
+		{0}
+	};
+
+	if ((get_arm_config()->flags & ARM_CONFIG_HAS_TZC) != 0U)
+		arm_tzc400_setup(PLAT_ARM_TZC_BASE, fvp_tzc_regions);
+}
diff --git a/plat/arm/board/fvp/fvp_stack_protector.c b/plat/arm/board/fvp/fvp_stack_protector.c
new file mode 100644
index 0000000..e940a12
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_stack_protector.c
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <arch_helpers.h>
+#include <plat/common/platform.h>
+
+#define RANDOM_CANARY_VALUE ((u_register_t) 3288484550995823360ULL)
+
+u_register_t plat_get_stack_protector_canary(void)
+{
+	/*
+	 * Ideally, a random number should be returned instead of the
+	 * combination of a timer's value and a compile-time constant. As the
+	 * FVP does not have any random number generator, this is better than
+	 * nothing but not necessarily really secure.
+	 */
+	return RANDOM_CANARY_VALUE ^ read_cntpct_el0();
+}
+
diff --git a/plat/arm/board/fvp/fvp_topology.c b/plat/arm/board/fvp/fvp_topology.c
new file mode 100644
index 0000000..80cfbd5
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_topology.c
@@ -0,0 +1,123 @@
+/*
+ * Copyright (c) 2013-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch.h>
+#include <drivers/arm/fvp/fvp_pwrc.h>
+#include <fconf_hw_config_getter.h>
+#include <lib/cassert.h>
+#include <plat/arm/common/arm_config.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/common/platform.h>
+
+#include <platform_def.h>
+
+/* The FVP power domain tree descriptor */
+static unsigned char fvp_power_domain_tree_desc[FVP_CLUSTER_COUNT + 2];
+
+
+CASSERT(((FVP_CLUSTER_COUNT > 0) && (FVP_CLUSTER_COUNT <= 256)),
+			assert_invalid_fvp_cluster_count);
+
+/*******************************************************************************
+ * This function dynamically constructs the topology according to cpu-map node
+ * in HW_CONFIG dtb and returns it.
+ ******************************************************************************/
+const unsigned char *plat_get_power_domain_tree_desc(void)
+{
+	unsigned int i;
+	uint32_t cluster_count, cpus_per_cluster;
+
+	/*
+	 * fconf APIs are not supported for RESET_TO_SP_MIN, RESET_TO_BL31 and
+	 * BL2_AT_EL3 systems.
+	 */
+#if RESET_TO_SP_MIN || RESET_TO_BL31 || BL2_AT_EL3
+	cluster_count = FVP_CLUSTER_COUNT;
+	cpus_per_cluster = FVP_MAX_CPUS_PER_CLUSTER * FVP_MAX_PE_PER_CPU;
+#else
+	cluster_count = FCONF_GET_PROPERTY(hw_config, topology, plat_cluster_count);
+	cpus_per_cluster = FCONF_GET_PROPERTY(hw_config, topology, cluster_cpu_count);
+	/* Several FVP Models use the same blanket dts. Ex: FVP_Base_Cortex-A65x4
+	 * and FVP_Base_Cortex-A65AEx8 both use same dts but have different number of
+	 * CPUs in the cluster, as reflected by build flags FVP_MAX_CPUS_PER_CLUSTER.
+	 * Take the minimum of two to ensure PSCI functions do not exceed the size of
+	 * the PSCI data structures allocated at build time.
+	 */
+	cpus_per_cluster = MIN(cpus_per_cluster,
+			(uint32_t)(FVP_MAX_CPUS_PER_CLUSTER * FVP_MAX_PE_PER_CPU));
+
+#endif
+
+	assert(cluster_count > 0U);
+	assert(cpus_per_cluster > 0U);
+
+	/*
+	 * The highest level is the system level. The next level is constituted
+	 * by clusters and then cores in clusters.
+	 */
+	fvp_power_domain_tree_desc[0] = 1;
+	fvp_power_domain_tree_desc[1] = (unsigned char)cluster_count;
+
+	for (i = 0; i < cluster_count; i++)
+		fvp_power_domain_tree_desc[i + 2] = (unsigned char)cpus_per_cluster;
+
+	return fvp_power_domain_tree_desc;
+}
+
+/*******************************************************************************
+ * This function returns the core count within the cluster corresponding to
+ * `mpidr`.
+ ******************************************************************************/
+unsigned int plat_arm_get_cluster_core_count(u_register_t mpidr)
+{
+	return FVP_MAX_CPUS_PER_CLUSTER;
+}
+
+/*******************************************************************************
+ * This function implements a part of the critical interface between the psci
+ * generic layer and the platform that allows the former to query the platform
+ * to convert an MPIDR to a unique linear index. An error code (-1) is returned
+ * in case the MPIDR is invalid.
+ ******************************************************************************/
+int plat_core_pos_by_mpidr(u_register_t mpidr)
+{
+	unsigned int clus_id, cpu_id, thread_id;
+
+	/* Validate affinity fields */
+	if ((arm_config.flags & ARM_CONFIG_FVP_SHIFTED_AFF) != 0U) {
+		thread_id = MPIDR_AFFLVL0_VAL(mpidr);
+		cpu_id = MPIDR_AFFLVL1_VAL(mpidr);
+		clus_id = MPIDR_AFFLVL2_VAL(mpidr);
+	} else {
+		thread_id = 0;
+		cpu_id = MPIDR_AFFLVL0_VAL(mpidr);
+		clus_id = MPIDR_AFFLVL1_VAL(mpidr);
+	}
+
+	if (clus_id >= FVP_CLUSTER_COUNT)
+		return -1;
+	if (cpu_id >= FVP_MAX_CPUS_PER_CLUSTER)
+		return -1;
+	if (thread_id >= FVP_MAX_PE_PER_CPU)
+		return -1;
+
+	if (fvp_pwrc_read_psysr(mpidr) == PSYSR_INVALID)
+		return -1;
+
+	/*
+	 * Core position calculation for FVP platform depends on the MT bit in
+	 * MPIDR. This function cannot assume that the supplied MPIDR has the MT
+	 * bit set even if the implementation has. For example, PSCI clients
+	 * might supply MPIDR values without the MT bit set. Therefore, we
+	 * inject the current PE's MT bit so as to get the calculation correct.
+	 * This of course assumes that none or all CPUs on the platform has MT
+	 * bit set.
+	 */
+	mpidr |= (read_mpidr_el1() & MPIDR_MT_MASK);
+	return (int) plat_arm_calc_core_pos(mpidr);
+}
diff --git a/plat/arm/board/fvp/fvp_trusted_boot.c b/plat/arm/board/fvp/fvp_trusted_boot.c
new file mode 100644
index 0000000..1ea37f7
--- /dev/null
+++ b/plat/arm/board/fvp/fvp_trusted_boot.c
@@ -0,0 +1,71 @@
+/*
+ * Copyright (c) 2016-2020, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <stdint.h>
+#include <string.h>
+
+#include <lib/mmio.h>
+#include <lib/fconf/fconf.h>
+#include <plat/arm/common/plat_arm.h>
+#include <plat/arm/common/fconf_nv_cntr_getter.h>
+#include <plat/common/platform.h>
+#include <platform_def.h>
+#include <tools_share/tbbr_oid.h>
+
+/*
+ * Return the ROTPK hash in the following ASN.1 structure in DER format:
+ *
+ * AlgorithmIdentifier  ::=  SEQUENCE  {
+ *     algorithm         OBJECT IDENTIFIER,
+ *     parameters        ANY DEFINED BY algorithm OPTIONAL
+ * }
+ *
+ * DigestInfo ::= SEQUENCE {
+ *     digestAlgorithm   AlgorithmIdentifier,
+ *     digest            OCTET STRING
+ * }
+ */
+int plat_get_rotpk_info(void *cookie, void **key_ptr, unsigned int *key_len,
+			unsigned int *flags)
+{
+	return arm_get_rotpk_info(cookie, key_ptr, key_len, flags);
+}
+
+/*
+ * Store a new non-volatile counter value.
+ *
+ * On some FVP versions, the non-volatile counters are read-only so this
+ * function will always fail.
+ *
+ * Return: 0 = success, Otherwise = error
+ */
+int plat_set_nv_ctr(void *cookie, unsigned int nv_ctr)
+{
+	const char *oid;
+	uintptr_t nv_ctr_addr;
+
+	assert(cookie != NULL);
+
+	oid = (const char *)cookie;
+	if (strcmp(oid, TRUSTED_FW_NVCOUNTER_OID) == 0) {
+		nv_ctr_addr = FCONF_GET_PROPERTY(cot, nv_cntr_addr,
+						TRUSTED_NV_CTR_ID);
+	} else if (strcmp(oid, NON_TRUSTED_FW_NVCOUNTER_OID) == 0) {
+		nv_ctr_addr = FCONF_GET_PROPERTY(cot, nv_cntr_addr,
+						NON_TRUSTED_NV_CTR_ID);
+	} else {
+		return 1;
+	}
+
+	mmio_write_32(nv_ctr_addr, nv_ctr);
+
+	/*
+	 * If the FVP models a locked counter then its value cannot be updated
+	 * and the above write operation has been silently ignored.
+	 */
+	return (mmio_read_32(nv_ctr_addr) == nv_ctr) ? 0 : 1;
+}
diff --git a/plat/arm/board/fvp/include/fconf_hw_config_getter.h b/plat/arm/board/fvp/include/fconf_hw_config_getter.h
new file mode 100644
index 0000000..ca85f7a
--- /dev/null
+++ b/plat/arm/board/fvp/include/fconf_hw_config_getter.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2020, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FCONF_HW_CONFIG_GETTER_H
+#define FCONF_HW_CONFIG_GETTER_H
+
+#include <lib/fconf/fconf.h>
+
+/* Hardware Config related getter */
+#define hw_config__gicv3_config_getter(prop) gicv3_config.prop
+#define hw_config__topology_getter(prop) soc_topology.prop
+#define hw_config__uart_serial_config_getter(prop) uart_serial_config.prop
+#define hw_config__cpu_timer_getter(prop) cpu_timer.prop
+
+struct gicv3_config_t {
+	uint64_t gicd_base;
+	uint64_t gicr_base;
+};
+
+struct hw_topology_t {
+	uint32_t plat_cluster_count;
+	uint32_t cluster_cpu_count;
+	uint32_t plat_cpu_count;
+	uint32_t plat_max_pwr_level;
+};
+
+struct uart_serial_config_t {
+	uint64_t uart_base;
+	uint32_t uart_clk;
+};
+
+struct cpu_timer_t {
+	uint32_t clock_freq;
+};
+
+int fconf_populate_gicv3_config(uintptr_t config);
+int fconf_populate_topology(uintptr_t config);
+int fconf_populate_uart_config(uintptr_t config);
+int fconf_populate_cpu_timer(uintptr_t config);
+
+extern struct gicv3_config_t gicv3_config;
+extern struct hw_topology_t soc_topology;
+extern struct uart_serial_config_t uart_serial_config;
+extern struct cpu_timer_t cpu_timer;
+#endif /* FCONF_HW_CONFIG_GETTER_H */
diff --git a/plat/arm/board/fvp/include/fconf_nt_config_getter.h b/plat/arm/board/fvp/include/fconf_nt_config_getter.h
new file mode 100644
index 0000000..0824c35
--- /dev/null
+++ b/plat/arm/board/fvp/include/fconf_nt_config_getter.h
@@ -0,0 +1,27 @@
+/*
+ * Copyright (c) 2020, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef FCONF_NT_CONFIG_GETTER_H
+#define FCONF_NT_CONFIG_GETTER_H
+
+#include <lib/fconf/fconf.h>
+
+/* NT Firmware Config related getter */
+#define nt_config__event_log_config_getter(prop) event_log.prop
+
+struct event_log_config_t {
+#ifdef SPD_opteed
+	void *tpm_event_log_sm_addr;
+#endif
+	void *tpm_event_log_addr;
+	size_t tpm_event_log_size;
+};
+
+int fconf_populate_event_log_config(uintptr_t config);
+
+extern struct event_log_config_t event_log_config;
+
+#endif /* FCONF_NT_CONFIG_GETTER_H */
diff --git a/plat/arm/board/fvp/include/fvp_critical_data.h b/plat/arm/board/fvp/include/fvp_critical_data.h
new file mode 100644
index 0000000..04bd5b2
--- /dev/null
+++ b/plat/arm/board/fvp/include/fvp_critical_data.h
@@ -0,0 +1,23 @@
+/*
+ * Copyright (c) 2021-2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef FVP_CRITICAL_DATA_H
+#define FVP_CRITICAL_DATA_H
+
+#include <common/nv_cntr_ids.h>
+#include <lib/utils_def.h>
+#include <plat/common/platform.h>
+
+#define EVLOG_CRITICAL_DATA_STRING	"CRITICAL DATA"
+
+#define CRITICAL_DATA_ID		CRITICAL_DATA_ID_BASE
+
+struct fvp_critical_data {
+
+	/* platform NV counters */
+	unsigned int nv_ctr[MAX_NV_CTR_IDS];
+};
+
+#endif /* FVP_CRITICAL_DATA_H */
diff --git a/plat/arm/board/fvp/include/plat.ld.S b/plat/arm/board/fvp/include/plat.ld.S
new file mode 100644
index 0000000..7c8bf06
--- /dev/null
+++ b/plat/arm/board/fvp/include/plat.ld.S
@@ -0,0 +1,15 @@
+/*
+ * Copyright (c) 2017-2019, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef PLAT_LD_S
+#define PLAT_LD_S
+
+#include <plat/arm/common/arm_tzc_dram.ld.S>
+
+#if RECLAIM_INIT_CODE
+#include <plat/arm/common/arm_reclaim_init.ld.S>
+#endif /* RECLAIM_INIT_CODE */
+
+#endif /* PLAT_LD_S */
diff --git a/plat/arm/board/fvp/include/plat_macros.S b/plat/arm/board/fvp/include/plat_macros.S
new file mode 100644
index 0000000..57f5924
--- /dev/null
+++ b/plat/arm/board/fvp/include/plat_macros.S
@@ -0,0 +1,42 @@
+/*
+ * Copyright (c) 2014-2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef PLAT_MACROS_S
+#define PLAT_MACROS_S
+
+#include <arm_macros.S>
+#include <platform_def.h>
+
+	/* ---------------------------------------------
+	 * The below required platform porting macro
+	 * prints out relevant GIC registers whenever an
+	 * unhandled exception is taken in BL31.
+	 * Clobbers: x0 - x10, x16, x17, sp
+	 * ---------------------------------------------
+	 */
+	.macro plat_crash_print_regs
+	/*
+	 * Detect if we're using the base memory map or
+	 * the legacy VE memory map
+	 */
+	mov_imm	x0, (V2M_SYSREGS_BASE + V2M_SYS_ID)
+	ldr	w16, [x0]
+	/* Extract BLD (12th - 15th bits) from the SYS_ID */
+	ubfx	x16, x16, #V2M_SYS_ID_BLD_SHIFT, #4
+	/* Check if VE mmap */
+	cmp	w16, #BLD_GIC_VE_MMAP
+	b.eq	use_ve_mmap
+	/* Assume Base Cortex mmap */
+	mov_imm	x17, BASE_GICC_BASE
+	mov_imm	x16, BASE_GICD_BASE
+	b	print_gic_regs
+use_ve_mmap:
+	mov_imm	x17, VE_GICC_BASE
+	mov_imm	x16, VE_GICD_BASE
+print_gic_regs:
+	arm_print_gic_regs
+	.endm
+
+#endif /* PLAT_MACROS_S */
diff --git a/plat/arm/board/fvp/include/platform_def.h b/plat/arm/board/fvp/include/platform_def.h
new file mode 100644
index 0000000..1ef6c87
--- /dev/null
+++ b/plat/arm/board/fvp/include/platform_def.h
@@ -0,0 +1,416 @@
+/*
+ * Copyright (c) 2014-2022, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef PLATFORM_DEF_H
+#define PLATFORM_DEF_H
+
+#include <drivers/arm/tzc400.h>
+#include <lib/utils_def.h>
+#include <plat/arm/board/common/v2m_def.h>
+#include <plat/arm/common/arm_def.h>
+#include <plat/arm/common/arm_spm_def.h>
+#include <plat/common/common_def.h>
+
+#include "../fvp_def.h"
+
+/* Required platform porting definitions */
+#define PLATFORM_CORE_COUNT  (U(FVP_CLUSTER_COUNT) * \
+			      U(FVP_MAX_CPUS_PER_CLUSTER) * \
+			      U(FVP_MAX_PE_PER_CPU))
+
+#define PLAT_NUM_PWR_DOMAINS (U(FVP_CLUSTER_COUNT) + \
+			      PLATFORM_CORE_COUNT + U(1))
+
+#define PLAT_MAX_PWR_LVL		ARM_PWR_LVL2
+
+/*
+ * Other platform porting definitions are provided by included headers
+ */
+
+/*
+ * Required ARM standard platform porting definitions
+ */
+#define PLAT_ARM_CLUSTER_COUNT		U(FVP_CLUSTER_COUNT)
+
+#define PLAT_ARM_TRUSTED_SRAM_SIZE	UL(0x00040000)	/* 256 KB */
+
+#define PLAT_ARM_TRUSTED_ROM_BASE	UL(0x00000000)
+#define PLAT_ARM_TRUSTED_ROM_SIZE	UL(0x04000000)	/* 64 MB */
+
+#define PLAT_ARM_TRUSTED_DRAM_BASE	UL(0x06000000)
+#define PLAT_ARM_TRUSTED_DRAM_SIZE	UL(0x02000000)	/* 32 MB */
+
+#if ENABLE_RME
+#define PLAT_ARM_RMM_BASE		(RMM_BASE)
+#define PLAT_ARM_RMM_SIZE		(RMM_LIMIT - RMM_BASE)
+#endif
+
+/*
+ * Max size of SPMC is 2MB for fvp. With SPMD enabled this value corresponds to
+ * max size of BL32 image.
+ */
+#if defined(SPD_spmd)
+#define PLAT_ARM_SPMC_BASE		PLAT_ARM_TRUSTED_DRAM_BASE
+#define PLAT_ARM_SPMC_SIZE		UL(0x200000)  /* 2 MB */
+#endif
+
+/* virtual address used by dynamic mem_protect for chunk_base */
+#define PLAT_ARM_MEM_PROTEC_VA_FRAME	UL(0xc0000000)
+
+/* No SCP in FVP */
+#define PLAT_ARM_SCP_TZC_DRAM1_SIZE	UL(0x0)
+
+#define PLAT_ARM_DRAM2_BASE	ULL(0x880000000) /* 36-bit range */
+#define PLAT_ARM_DRAM2_SIZE	ULL(0x780000000) /* 30 GB */
+
+#define FVP_DRAM3_BASE	ULL(0x8800000000) /* 40-bit range */
+#define FVP_DRAM3_SIZE	ULL(0x7800000000) /* 480 GB */
+#define FVP_DRAM3_END	(FVP_DRAM3_BASE + FVP_DRAM3_SIZE - 1U)
+
+#define FVP_DRAM4_BASE	ULL(0x88000000000) /* 44-bit range */
+#define FVP_DRAM4_SIZE	ULL(0x78000000000) /* 7.5 TB */
+#define FVP_DRAM4_END	(FVP_DRAM4_BASE + FVP_DRAM4_SIZE - 1U)
+
+#define FVP_DRAM5_BASE	ULL(0x880000000000) /* 48-bit range */
+#define FVP_DRAM5_SIZE	ULL(0x780000000000) /* 120 TB */
+#define FVP_DRAM5_END	(FVP_DRAM5_BASE + FVP_DRAM5_SIZE - 1U)
+
+#define FVP_DRAM6_BASE	ULL(0x8800000000000) /* 52-bit range */
+#define FVP_DRAM6_SIZE	ULL(0x7800000000000) /* 1920 TB */
+#define FVP_DRAM6_END	(FVP_DRAM6_BASE + FVP_DRAM6_SIZE - 1U)
+
+/* Range of kernel DTB load address */
+#define FVP_DTB_DRAM_MAP_START		ULL(0x82000000)
+#define FVP_DTB_DRAM_MAP_SIZE		ULL(0x02000000)	/* 32 MB */
+
+#define ARM_DTB_DRAM_NS			MAP_REGION_FLAT(		\
+					FVP_DTB_DRAM_MAP_START,		\
+					FVP_DTB_DRAM_MAP_SIZE,		\
+					MT_MEMORY | MT_RO | MT_NS)
+
+#if SPMC_AT_EL3
+/*
+ * Number of Secure Partitions supported.
+ * SPMC at EL3, uses this count to configure the maximum number of supported
+ * secure partitions.
+ */
+#define SECURE_PARTITION_COUNT		1
+
+/*
+ * Number of Normal World Partitions supported.
+ * SPMC at EL3, uses this count to configure the maximum number of supported
+ * NWd partitions.
+ */
+#define NS_PARTITION_COUNT		1
+
+/*
+ * Number of Logical Partitions supported.
+ * SPMC at EL3, uses this count to configure the maximum number of supported
+ * logical partitions.
+ */
+#define MAX_EL3_LP_DESCS_COUNT		1
+
+#endif /* SPMC_AT_EL3 */
+
+/*
+ * Load address of BL33 for this platform port
+ */
+#define PLAT_ARM_NS_IMAGE_BASE		(ARM_DRAM1_BASE + UL(0x8000000))
+
+/*
+ * PLAT_ARM_MMAP_ENTRIES depends on the number of entries in the
+ * plat_arm_mmap array defined for each BL stage.
+ */
+#if defined(IMAGE_BL31)
+# if SPM_MM
+#  define PLAT_ARM_MMAP_ENTRIES		10
+#  define MAX_XLAT_TABLES		9
+#  define PLAT_SP_IMAGE_MMAP_REGIONS	30
+#  define PLAT_SP_IMAGE_MAX_XLAT_TABLES	10
+# elif SPMC_AT_EL3
+#  define PLAT_ARM_MMAP_ENTRIES		13
+#  define MAX_XLAT_TABLES		11
+# else
+#  define PLAT_ARM_MMAP_ENTRIES		9
+#  if USE_DEBUGFS
+#   if ENABLE_RME
+#    define MAX_XLAT_TABLES		9
+#   else
+#    define MAX_XLAT_TABLES		8
+#   endif
+#  else
+#   if ENABLE_RME
+#    define MAX_XLAT_TABLES		8
+#   elif DRTM_SUPPORT
+#    define MAX_XLAT_TABLES		8
+#   else
+#    define MAX_XLAT_TABLES		7
+#   endif
+#  endif
+# endif
+#elif defined(IMAGE_BL32)
+# if SPMC_AT_EL3
+#  define PLAT_ARM_MMAP_ENTRIES		270
+#  define MAX_XLAT_TABLES		10
+# else
+#  define PLAT_ARM_MMAP_ENTRIES		9
+#  define MAX_XLAT_TABLES		6
+# endif
+#elif !USE_ROMLIB
+# define PLAT_ARM_MMAP_ENTRIES		11
+# define MAX_XLAT_TABLES		5
+#else
+# define PLAT_ARM_MMAP_ENTRIES		12
+# define MAX_XLAT_TABLES		6
+#endif
+
+/*
+ * PLAT_ARM_MAX_BL1_RW_SIZE is calculated using the current BL1 RW debug size
+ * plus a little space for growth.
+ */
+#define PLAT_ARM_MAX_BL1_RW_SIZE	UL(0xB000)
+
+/*
+ * PLAT_ARM_MAX_ROMLIB_RW_SIZE is define to use a full page
+ */
+
+#if USE_ROMLIB
+#define PLAT_ARM_MAX_ROMLIB_RW_SIZE	UL(0x1000)
+#define PLAT_ARM_MAX_ROMLIB_RO_SIZE	UL(0xe000)
+#define FVP_BL2_ROMLIB_OPTIMIZATION	UL(0x5000)
+#else
+#define PLAT_ARM_MAX_ROMLIB_RW_SIZE	UL(0)
+#define PLAT_ARM_MAX_ROMLIB_RO_SIZE	UL(0)
+#define FVP_BL2_ROMLIB_OPTIMIZATION UL(0)
+#endif
+
+/*
+ * PLAT_ARM_MAX_BL2_SIZE is calculated using the current BL2 debug size plus a
+ * little space for growth.
+ */
+#if TRUSTED_BOARD_BOOT && COT_DESC_IN_DTB
+# define PLAT_ARM_MAX_BL2_SIZE	(UL(0x1E000) - FVP_BL2_ROMLIB_OPTIMIZATION)
+#elif CRYPTO_SUPPORT
+# define PLAT_ARM_MAX_BL2_SIZE	(UL(0x1D000) - FVP_BL2_ROMLIB_OPTIMIZATION)
+#elif ARM_BL31_IN_DRAM
+/* When ARM_BL31_IN_DRAM is set, BL2 can use almost all of Trusted SRAM. */
+# define PLAT_ARM_MAX_BL2_SIZE	(UL(0x1F000) - FVP_BL2_ROMLIB_OPTIMIZATION)
+#else
+# define PLAT_ARM_MAX_BL2_SIZE	(UL(0x13000) - FVP_BL2_ROMLIB_OPTIMIZATION)
+#endif
+
+#if RESET_TO_BL31
+/* Size of Trusted SRAM - the first 4KB of shared memory - GPT L0 Tables */
+#define PLAT_ARM_MAX_BL31_SIZE		(PLAT_ARM_TRUSTED_SRAM_SIZE - \
+					 ARM_SHARED_RAM_SIZE - \
+					 ARM_L0_GPT_SIZE)
+#else
+/*
+ * Since BL31 NOBITS overlays BL2 and BL1-RW, PLAT_ARM_MAX_BL31_SIZE is
+ * calculated using the current BL31 PROGBITS debug size plus the sizes of
+ * BL2 and BL1-RW
+ */
+#define PLAT_ARM_MAX_BL31_SIZE		(UL(0x3D000) - ARM_L0_GPT_SIZE)
+#endif /* RESET_TO_BL31 */
+
+#ifndef __aarch64__
+#if RESET_TO_SP_MIN
+/* Size of Trusted SRAM - the first 4KB of shared memory */
+#define PLAT_ARM_MAX_BL32_SIZE		(PLAT_ARM_TRUSTED_SRAM_SIZE - \
+					 ARM_SHARED_RAM_SIZE)
+#else
+/*
+ * Since BL32 NOBITS overlays BL2 and BL1-RW, PLAT_ARM_MAX_BL32_SIZE is
+ * calculated using the current SP_MIN PROGBITS debug size plus the sizes of
+ * BL2 and BL1-RW
+ */
+# define PLAT_ARM_MAX_BL32_SIZE		UL(0x3B000)
+#endif /* RESET_TO_SP_MIN */
+#endif
+
+/*
+ * Size of cacheable stacks
+ */
+#if defined(IMAGE_BL1)
+# if CRYPTO_SUPPORT
+#  define PLATFORM_STACK_SIZE		UL(0x1000)
+# else
+#  define PLATFORM_STACK_SIZE		UL(0x500)
+# endif /* CRYPTO_SUPPORT */
+#elif defined(IMAGE_BL2)
+# if CRYPTO_SUPPORT
+#  define PLATFORM_STACK_SIZE		UL(0x1000)
+# else
+#  define PLATFORM_STACK_SIZE		UL(0x600)
+# endif /* CRYPTO_SUPPORT */
+#elif defined(IMAGE_BL2U)
+# define PLATFORM_STACK_SIZE		UL(0x400)
+#elif defined(IMAGE_BL31)
+# if DRTM_SUPPORT
+#  define PLATFORM_STACK_SIZE		UL(0x1000)
+# else
+#  define PLATFORM_STACK_SIZE		UL(0x800)
+# endif /* DRTM_SUPPORT */
+#elif defined(IMAGE_BL32)
+# if SPMC_AT_EL3
+#  define PLATFORM_STACK_SIZE		UL(0x1000)
+# else
+#  define PLATFORM_STACK_SIZE		UL(0x440)
+# endif /* SPMC_AT_EL3 */
+#elif defined(IMAGE_RMM)
+# define PLATFORM_STACK_SIZE		UL(0x440)
+#endif
+
+#define MAX_IO_DEVICES			3
+#define MAX_IO_HANDLES			4
+
+/* Reserve the last block of flash for PSCI MEM PROTECT flag */
+#define PLAT_ARM_FLASH_IMAGE_BASE	V2M_FLASH0_BASE
+#define PLAT_ARM_FLASH_IMAGE_MAX_SIZE	(V2M_FLASH0_SIZE - V2M_FLASH_BLOCK_SIZE)
+
+#if ARM_GPT_SUPPORT
+/*
+ * Offset of the FIP in the GPT image. BL1 component uses this option
+ * as it does not load the partition table to get the FIP base
+ * address. At sector 34 by default (i.e. after reserved sectors 0-33)
+ * Offset = 34 * 512(sector size) = 17408 i.e. 0x4400
+ */
+#define PLAT_ARM_FIP_OFFSET_IN_GPT	0x4400
+#endif /* ARM_GPT_SUPPORT */
+
+#define PLAT_ARM_NVM_BASE		V2M_FLASH0_BASE
+#define PLAT_ARM_NVM_SIZE		(V2M_FLASH0_SIZE - V2M_FLASH_BLOCK_SIZE)
+
+/*
+ * PL011 related constants
+ */
+#define PLAT_ARM_BOOT_UART_BASE		V2M_IOFPGA_UART0_BASE
+#define PLAT_ARM_BOOT_UART_CLK_IN_HZ	V2M_IOFPGA_UART0_CLK_IN_HZ
+
+#define PLAT_ARM_RUN_UART_BASE		V2M_IOFPGA_UART1_BASE
+#define PLAT_ARM_RUN_UART_CLK_IN_HZ	V2M_IOFPGA_UART1_CLK_IN_HZ
+
+#define PLAT_ARM_CRASH_UART_BASE	PLAT_ARM_RUN_UART_BASE
+#define PLAT_ARM_CRASH_UART_CLK_IN_HZ	PLAT_ARM_RUN_UART_CLK_IN_HZ
+
+#define PLAT_ARM_TSP_UART_BASE		V2M_IOFPGA_UART2_BASE
+#define PLAT_ARM_TSP_UART_CLK_IN_HZ	V2M_IOFPGA_UART2_CLK_IN_HZ
+
+#define PLAT_ARM_TRP_UART_BASE		V2M_IOFPGA_UART3_BASE
+#define PLAT_ARM_TRP_UART_CLK_IN_HZ	V2M_IOFPGA_UART3_CLK_IN_HZ
+
+#define PLAT_FVP_SMMUV3_BASE		UL(0x2b400000)
+#define PLAT_ARM_SMMUV3_ROOT_REG_OFFSET UL(0x20000)
+
+/* CCI related constants */
+#define PLAT_FVP_CCI400_BASE		UL(0x2c090000)
+#define PLAT_FVP_CCI400_CLUS0_SL_PORT	3
+#define PLAT_FVP_CCI400_CLUS1_SL_PORT	4
+
+/* CCI-500/CCI-550 on Base platform */
+#define PLAT_FVP_CCI5XX_BASE		UL(0x2a000000)
+#define PLAT_FVP_CCI5XX_CLUS0_SL_PORT	5
+#define PLAT_FVP_CCI5XX_CLUS1_SL_PORT	6
+
+/* CCN related constants. Only CCN 502 is currently supported */
+#define PLAT_ARM_CCN_BASE		UL(0x2e000000)
+#define PLAT_ARM_CLUSTER_TO_CCN_ID_MAP	1, 5, 7, 11
+
+/* System timer related constants */
+#define PLAT_ARM_NSTIMER_FRAME_ID		U(1)
+
+/* Mailbox base address */
+#define PLAT_ARM_TRUSTED_MAILBOX_BASE	ARM_TRUSTED_SRAM_BASE
+
+
+/* TrustZone controller related constants
+ *
+ * Currently only filters 0 and 2 are connected on Base FVP.
+ * Filter 0 : CPU clusters (no access to DRAM by default)
+ * Filter 1 : not connected
+ * Filter 2 : LCDs (access to VRAM allowed by default)
+ * Filter 3 : not connected
+ * Programming unconnected filters will have no effect at the
+ * moment. These filter could, however, be connected in future.
+ * So care should be taken not to configure the unused filters.
+ *
+ * Allow only non-secure access to all DRAM to supported devices.
+ * Give access to the CPUs and Virtio. Some devices
+ * would normally use the default ID so allow that too.
+ */
+#define PLAT_ARM_TZC_BASE		UL(0x2a4a0000)
+#define PLAT_ARM_TZC_FILTERS		TZC_400_REGION_ATTR_FILTER_BIT(0)
+
+#define PLAT_ARM_TZC_NS_DEV_ACCESS	(				\
+		TZC_REGION_ACCESS_RDWR(FVP_NSAID_DEFAULT)	|	\
+		TZC_REGION_ACCESS_RDWR(FVP_NSAID_PCI)		|	\
+		TZC_REGION_ACCESS_RDWR(FVP_NSAID_AP)		|	\
+		TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO)	|	\
+		TZC_REGION_ACCESS_RDWR(FVP_NSAID_VIRTIO_OLD))
+
+/*
+ * GIC related constants to cater for both GICv2 and GICv3 instances of an
+ * FVP. They could be overridden at runtime in case the FVP implements the
+ * legacy VE memory map.
+ */
+#define PLAT_ARM_GICD_BASE		BASE_GICD_BASE
+#define PLAT_ARM_GICR_BASE		BASE_GICR_BASE
+#define PLAT_ARM_GICC_BASE		BASE_GICC_BASE
+
+/*
+ * Define a list of Group 1 Secure and Group 0 interrupts as per GICv3
+ * terminology. On a GICv2 system or mode, the lists will be merged and treated
+ * as Group 0 interrupts.
+ */
+#define PLAT_ARM_G1S_IRQ_PROPS(grp) \
+	ARM_G1S_IRQ_PROPS(grp), \
+	INTR_PROP_DESC(FVP_IRQ_TZ_WDOG, GIC_HIGHEST_SEC_PRIORITY, (grp), \
+			GIC_INTR_CFG_LEVEL), \
+	INTR_PROP_DESC(FVP_IRQ_SEC_SYS_TIMER, GIC_HIGHEST_SEC_PRIORITY, (grp), \
+			GIC_INTR_CFG_LEVEL)
+
+#define PLAT_ARM_G0_IRQ_PROPS(grp)	ARM_G0_IRQ_PROPS(grp)
+
+#if SDEI_IN_FCONF
+#define PLAT_SDEI_DP_EVENT_MAX_CNT	ARM_SDEI_DP_EVENT_MAX_CNT
+#define PLAT_SDEI_DS_EVENT_MAX_CNT	ARM_SDEI_DS_EVENT_MAX_CNT
+#else
+#define PLAT_ARM_PRIVATE_SDEI_EVENTS	ARM_SDEI_PRIVATE_EVENTS
+#define PLAT_ARM_SHARED_SDEI_EVENTS	ARM_SDEI_SHARED_EVENTS
+#endif
+
+#define PLAT_ARM_SP_IMAGE_STACK_BASE	(PLAT_SP_IMAGE_NS_BUF_BASE +	\
+					 PLAT_SP_IMAGE_NS_BUF_SIZE)
+
+#define PLAT_SP_PRI			PLAT_RAS_PRI
+
+/*
+ * Physical and virtual address space limits for MMU in AARCH64 & AARCH32 modes
+ */
+#ifdef __aarch64__
+#define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 36)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 36)
+#else
+#define PLAT_PHY_ADDR_SPACE_SIZE	(1ULL << 32)
+#define PLAT_VIRT_ADDR_SPACE_SIZE	(1ULL << 32)
+#endif
+
+/*
+ * Maximum size of Event Log buffer used in Measured Boot Event Log driver
+ */
+#define	PLAT_ARM_EVENT_LOG_MAX_SIZE		UL(0x400)
+
+/*
+ * Maximum size of Event Log buffer used for DRTM
+ */
+#define PLAT_DRTM_EVENT_LOG_MAX_SIZE		UL(0x300)
+
+/*
+ * Number of MMAP entries used by DRTM implementation
+ */
+#define PLAT_DRTM_MMAP_ENTRIES			PLAT_ARM_MMAP_ENTRIES
+
+#endif /* PLATFORM_DEF_H */
diff --git a/plat/arm/board/fvp/jmptbl.i b/plat/arm/board/fvp/jmptbl.i
new file mode 100644
index 0000000..85e6e3a
--- /dev/null
+++ b/plat/arm/board/fvp/jmptbl.i
@@ -0,0 +1,63 @@
+#
+# Copyright (c) 2018-2022, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+# Platform specific romlib functions can be added or included here.
+# The index in the output file will be generated cumulatively in the same
+# order as it is given in this file.
+# Output file can be found at: $BUILD_DIR/jmptbl.i
+#
+# Format:
+# lib	function	[patch]
+# Example:
+# rom	rom_lib_init
+# fdt	fdt_getprop_namelen	patch
+
+rom     rom_lib_init
+fdt     fdt_getprop
+fdt     fdt_get_property
+fdt     fdt_getprop_namelen
+fdt     fdt_setprop_inplace
+fdt     fdt_check_header
+fdt     fdt_node_offset_by_compatible
+fdt     fdt_setprop_inplace_namelen_partial
+fdt     fdt_first_subnode
+fdt     fdt_next_subnode
+fdt     fdt_path_offset
+fdt     fdt_path_offset_namelen
+fdt     fdt_subnode_offset
+fdt     fdt_address_cells
+fdt     fdt_size_cells
+fdt     fdt_parent_offset
+fdt     fdt_stringlist_search
+fdt     fdt_get_alias_namelen
+fdt     fdt_get_name
+fdt     fdt_get_alias
+fdt     fdt_node_offset_by_phandle
+fdt     fdt_subnode_offset
+fdt     fdt_add_subnode
+mbedtls mbedtls_asn1_get_alg
+mbedtls mbedtls_asn1_get_alg_null
+mbedtls mbedtls_asn1_get_bitstring_null
+mbedtls mbedtls_asn1_get_bool
+mbedtls mbedtls_asn1_get_int
+mbedtls mbedtls_asn1_get_tag
+mbedtls mbedtls_free
+mbedtls mbedtls_md
+mbedtls mbedtls_md_get_size
+mbedtls mbedtls_memory_buffer_alloc_init
+mbedtls mbedtls_oid_get_md_alg
+mbedtls mbedtls_oid_get_numeric_string
+mbedtls mbedtls_oid_get_pk_alg
+mbedtls mbedtls_oid_get_sig_alg
+mbedtls mbedtls_pk_free
+mbedtls mbedtls_pk_init
+mbedtls mbedtls_pk_parse_subpubkey
+mbedtls mbedtls_pk_verify_ext
+mbedtls mbedtls_platform_set_snprintf
+mbedtls mbedtls_x509_get_rsassa_pss_params
+mbedtls mbedtls_x509_get_sig_alg
+mbedtls mbedtls_md_info_from_type
+c       exit
+c       atexit
diff --git a/plat/arm/board/fvp/platform.mk b/plat/arm/board/fvp/platform.mk
new file mode 100644
index 0000000..51ba035
--- /dev/null
+++ b/plat/arm/board/fvp/platform.mk
@@ -0,0 +1,464 @@
+#
+# Copyright (c) 2013-2022, Arm Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+include common/fdt_wrappers.mk
+
+# Use the GICv3 driver on the FVP by default
+FVP_USE_GIC_DRIVER	:= FVP_GICV3
+
+# Default cluster count for FVP
+FVP_CLUSTER_COUNT	:= 2
+
+# Default number of CPUs per cluster on FVP
+FVP_MAX_CPUS_PER_CLUSTER	:= 4
+
+# Default number of threads per CPU on FVP
+FVP_MAX_PE_PER_CPU	:= 1
+
+# Disable redistributor frame of inactive/fused CPU cores by marking it as read
+# only; enable redistributor frames of all CPU cores by default.
+FVP_GICR_REGION_PROTECTION		:= 0
+
+FVP_DT_PREFIX		:= fvp-base-gicv3-psci
+
+# The FVP platform depends on this macro to build with correct GIC driver.
+$(eval $(call add_define,FVP_USE_GIC_DRIVER))
+
+# Pass FVP_CLUSTER_COUNT to the build system.
+$(eval $(call add_define,FVP_CLUSTER_COUNT))
+
+# Pass FVP_MAX_CPUS_PER_CLUSTER to the build system.
+$(eval $(call add_define,FVP_MAX_CPUS_PER_CLUSTER))
+
+# Pass FVP_MAX_PE_PER_CPU to the build system.
+$(eval $(call add_define,FVP_MAX_PE_PER_CPU))
+
+# Pass FVP_GICR_REGION_PROTECTION to the build system.
+$(eval $(call add_define,FVP_GICR_REGION_PROTECTION))
+
+# Sanity check the cluster count and if FVP_CLUSTER_COUNT <= 2,
+# choose the CCI driver , else the CCN driver
+ifeq ($(FVP_CLUSTER_COUNT), 0)
+$(error "Incorrect cluster count specified for FVP port")
+else ifeq ($(FVP_CLUSTER_COUNT),$(filter $(FVP_CLUSTER_COUNT),1 2))
+FVP_INTERCONNECT_DRIVER := FVP_CCI
+else
+FVP_INTERCONNECT_DRIVER := FVP_CCN
+endif
+
+$(eval $(call add_define,FVP_INTERCONNECT_DRIVER))
+
+# Choose the GIC sources depending upon the how the FVP will be invoked
+ifeq (${FVP_USE_GIC_DRIVER}, FVP_GICV3)
+
+# The GIC model (GIC-600 or GIC-500) will be detected at runtime
+GICV3_SUPPORT_GIC600		:=	1
+GICV3_OVERRIDE_DISTIF_PWR_OPS	:=	1
+
+# Include GICv3 driver files
+include drivers/arm/gic/v3/gicv3.mk
+
+FVP_GIC_SOURCES		:=	${GICV3_SOURCES}			\
+				plat/common/plat_gicv3.c		\
+				plat/arm/common/arm_gicv3.c
+
+	ifeq ($(filter 1,${BL2_AT_EL3} ${RESET_TO_BL31} ${RESET_TO_SP_MIN}),)
+		FVP_GIC_SOURCES += plat/arm/board/fvp/fvp_gicv3.c
+	endif
+
+else ifeq (${FVP_USE_GIC_DRIVER}, FVP_GICV2)
+
+# No GICv4 extension
+GIC_ENABLE_V4_EXTN	:=	0
+$(eval $(call add_define,GIC_ENABLE_V4_EXTN))
+
+# Include GICv2 driver files
+include drivers/arm/gic/v2/gicv2.mk
+
+FVP_GIC_SOURCES		:=	${GICV2_SOURCES}			\
+				plat/common/plat_gicv2.c		\
+				plat/arm/common/arm_gicv2.c
+
+FVP_DT_PREFIX		:=	fvp-base-gicv2-psci
+else
+$(error "Incorrect GIC driver chosen on FVP port")
+endif
+
+ifeq (${FVP_INTERCONNECT_DRIVER}, FVP_CCI)
+FVP_INTERCONNECT_SOURCES	:= 	drivers/arm/cci/cci.c
+else ifeq (${FVP_INTERCONNECT_DRIVER}, FVP_CCN)
+FVP_INTERCONNECT_SOURCES	:= 	drivers/arm/ccn/ccn.c		\
+					plat/arm/common/arm_ccn.c
+else
+$(error "Incorrect CCN driver chosen on FVP port")
+endif
+
+FVP_SECURITY_SOURCES	:=	drivers/arm/tzc/tzc400.c		\
+				plat/arm/board/fvp/fvp_security.c	\
+				plat/arm/common/arm_tzc400.c
+
+
+PLAT_INCLUDES		:=	-Iplat/arm/board/fvp/include
+
+
+PLAT_BL_COMMON_SOURCES	:=	plat/arm/board/fvp/fvp_common.c
+
+FVP_CPU_LIBS		:=	lib/cpus/${ARCH}/aem_generic.S
+
+ifeq (${ARCH}, aarch64)
+
+# select a different set of CPU files, depending on whether we compile for
+# hardware assisted coherency cores or not
+ifeq (${HW_ASSISTED_COHERENCY}, 0)
+# Cores used without DSU
+	FVP_CPU_LIBS	+=	lib/cpus/aarch64/cortex_a35.S			\
+				lib/cpus/aarch64/cortex_a53.S			\
+				lib/cpus/aarch64/cortex_a57.S			\
+				lib/cpus/aarch64/cortex_a72.S			\
+				lib/cpus/aarch64/cortex_a73.S
+else
+# Cores used with DSU only
+	ifeq (${CTX_INCLUDE_AARCH32_REGS}, 0)
+	# AArch64-only cores
+		FVP_CPU_LIBS	+=	lib/cpus/aarch64/cortex_a76.S		\
+					lib/cpus/aarch64/cortex_a76ae.S		\
+					lib/cpus/aarch64/cortex_a77.S		\
+					lib/cpus/aarch64/cortex_a78.S		\
+					lib/cpus/aarch64/neoverse_n_common.S	\
+					lib/cpus/aarch64/neoverse_n1.S		\
+					lib/cpus/aarch64/neoverse_n2.S		\
+					lib/cpus/aarch64/neoverse_e1.S		\
+					lib/cpus/aarch64/neoverse_v1.S		\
+					lib/cpus/aarch64/neoverse_v2.S	\
+					lib/cpus/aarch64/cortex_a78_ae.S	\
+					lib/cpus/aarch64/cortex_a510.S		\
+					lib/cpus/aarch64/cortex_a710.S		\
+					lib/cpus/aarch64/cortex_a715.S		\
+					lib/cpus/aarch64/cortex_x3.S 		\
+					lib/cpus/aarch64/cortex_a65.S		\
+					lib/cpus/aarch64/cortex_a65ae.S		\
+					lib/cpus/aarch64/cortex_a78c.S		\
+					lib/cpus/aarch64/cortex_hayes.S		\
+					lib/cpus/aarch64/cortex_hunter.S	\
+					lib/cpus/aarch64/cortex_hunter_elp_arm.S \
+					lib/cpus/aarch64/cortex_x2.S		\
+					lib/cpus/aarch64/neoverse_poseidon.S
+	endif
+	# AArch64/AArch32 cores
+	FVP_CPU_LIBS	+=	lib/cpus/aarch64/cortex_a55.S		\
+				lib/cpus/aarch64/cortex_a75.S
+endif
+
+else
+FVP_CPU_LIBS		+=	lib/cpus/aarch32/cortex_a32.S
+endif
+
+BL1_SOURCES		+=	drivers/arm/smmu/smmu_v3.c			\
+				drivers/arm/sp805/sp805.c			\
+				drivers/delay_timer/delay_timer.c		\
+				drivers/io/io_semihosting.c			\
+				lib/semihosting/semihosting.c			\
+				lib/semihosting/${ARCH}/semihosting_call.S	\
+				plat/arm/board/fvp/${ARCH}/fvp_helpers.S	\
+				plat/arm/board/fvp/fvp_bl1_setup.c		\
+				plat/arm/board/fvp/fvp_err.c			\
+				plat/arm/board/fvp/fvp_io_storage.c		\
+				${FVP_CPU_LIBS}					\
+				${FVP_INTERCONNECT_SOURCES}
+
+ifeq (${USE_SP804_TIMER},1)
+BL1_SOURCES		+=	drivers/arm/sp804/sp804_delay_timer.c
+else
+BL1_SOURCES		+=	drivers/delay_timer/generic_delay_timer.c
+endif
+
+
+BL2_SOURCES		+=	drivers/arm/sp805/sp805.c			\
+				drivers/io/io_semihosting.c			\
+				lib/utils/mem_region.c				\
+				lib/semihosting/semihosting.c			\
+				lib/semihosting/${ARCH}/semihosting_call.S	\
+				plat/arm/board/fvp/fvp_bl2_setup.c		\
+				plat/arm/board/fvp/fvp_err.c			\
+				plat/arm/board/fvp/fvp_io_storage.c		\
+				plat/arm/common/arm_nor_psci_mem_protect.c	\
+				${FVP_SECURITY_SOURCES}
+
+
+ifeq (${COT_DESC_IN_DTB},1)
+BL2_SOURCES		+=	plat/arm/common/fconf/fconf_nv_cntr_getter.c
+endif
+
+ifeq (${ENABLE_RME},1)
+BL2_SOURCES		+=	plat/arm/board/fvp/aarch64/fvp_helpers.S
+BL31_SOURCES		+=	plat/arm/board/fvp/fvp_plat_attest_token.c	\
+				plat/arm/board/fvp/fvp_realm_attest_key.c
+endif
+
+ifeq (${BL2_AT_EL3},1)
+BL2_SOURCES		+=	plat/arm/board/fvp/${ARCH}/fvp_helpers.S	\
+				plat/arm/board/fvp/fvp_bl2_el3_setup.c		\
+				${FVP_CPU_LIBS}					\
+				${FVP_INTERCONNECT_SOURCES}
+endif
+
+ifeq (${USE_SP804_TIMER},1)
+BL2_SOURCES		+=	drivers/arm/sp804/sp804_delay_timer.c
+endif
+
+BL2U_SOURCES		+=	plat/arm/board/fvp/fvp_bl2u_setup.c		\
+				${FVP_SECURITY_SOURCES}
+
+ifeq (${USE_SP804_TIMER},1)
+BL2U_SOURCES		+=	drivers/arm/sp804/sp804_delay_timer.c
+endif
+
+BL31_SOURCES		+=	drivers/arm/fvp/fvp_pwrc.c			\
+				drivers/arm/smmu/smmu_v3.c			\
+				drivers/delay_timer/delay_timer.c		\
+				drivers/cfi/v2m/v2m_flash.c			\
+				lib/utils/mem_region.c				\
+				plat/arm/board/fvp/fvp_bl31_setup.c		\
+				plat/arm/board/fvp/fvp_console.c		\
+				plat/arm/board/fvp/fvp_pm.c			\
+				plat/arm/board/fvp/fvp_topology.c		\
+				plat/arm/board/fvp/aarch64/fvp_helpers.S	\
+				plat/arm/common/arm_nor_psci_mem_protect.c	\
+				${FVP_CPU_LIBS}					\
+				${FVP_GIC_SOURCES}				\
+				${FVP_INTERCONNECT_SOURCES}			\
+				${FVP_SECURITY_SOURCES}
+
+# Support for fconf in BL31
+# Added separately from the above list for better readability
+ifeq ($(filter 1,${BL2_AT_EL3} ${RESET_TO_BL31}),)
+BL31_SOURCES		+=	lib/fconf/fconf.c				\
+				lib/fconf/fconf_dyn_cfg_getter.c		\
+				plat/arm/board/fvp/fconf/fconf_hw_config_getter.c
+
+BL31_SOURCES		+=	${FDT_WRAPPERS_SOURCES}
+
+ifeq (${SEC_INT_DESC_IN_FCONF},1)
+BL31_SOURCES		+=	plat/arm/common/fconf/fconf_sec_intr_config.c
+endif
+
+endif
+
+ifeq (${USE_SP804_TIMER},1)
+BL31_SOURCES		+=	drivers/arm/sp804/sp804_delay_timer.c
+else
+BL31_SOURCES		+=	drivers/delay_timer/generic_delay_timer.c
+endif
+
+# Add the FDT_SOURCES and options for Dynamic Config (only for Unix env)
+ifdef UNIX_MK
+FVP_HW_CONFIG_DTS	:=	fdts/${FVP_DT_PREFIX}.dts
+FDT_SOURCES		+=	$(addprefix plat/arm/board/fvp/fdts/,	\
+					${PLAT}_fw_config.dts		\
+					${PLAT}_tb_fw_config.dts	\
+					${PLAT}_soc_fw_config.dts	\
+					${PLAT}_nt_fw_config.dts	\
+				)
+
+FVP_FW_CONFIG		:=	${BUILD_PLAT}/fdts/${PLAT}_fw_config.dtb
+FVP_TB_FW_CONFIG	:=	${BUILD_PLAT}/fdts/${PLAT}_tb_fw_config.dtb
+FVP_SOC_FW_CONFIG	:=	${BUILD_PLAT}/fdts/${PLAT}_soc_fw_config.dtb
+FVP_NT_FW_CONFIG	:=	${BUILD_PLAT}/fdts/${PLAT}_nt_fw_config.dtb
+
+ifeq (${SPD},tspd)
+FDT_SOURCES		+=	plat/arm/board/fvp/fdts/${PLAT}_tsp_fw_config.dts
+FVP_TOS_FW_CONFIG	:=	${BUILD_PLAT}/fdts/${PLAT}_tsp_fw_config.dtb
+
+# Add the TOS_FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FVP_TOS_FW_CONFIG},--tos-fw-config,${FVP_TOS_FW_CONFIG}))
+endif
+
+ifeq (${SPD},spmd)
+
+ifeq ($(ARM_SPMC_MANIFEST_DTS),)
+ARM_SPMC_MANIFEST_DTS	:=	plat/arm/board/fvp/fdts/${PLAT}_spmc_manifest.dts
+endif
+
+FDT_SOURCES		+=	${ARM_SPMC_MANIFEST_DTS}
+FVP_TOS_FW_CONFIG	:=	${BUILD_PLAT}/fdts/$(notdir $(basename ${ARM_SPMC_MANIFEST_DTS})).dtb
+
+# Add the TOS_FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FVP_TOS_FW_CONFIG},--tos-fw-config,${FVP_TOS_FW_CONFIG}))
+endif
+
+# Add the FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FVP_FW_CONFIG},--fw-config,${FVP_FW_CONFIG}))
+# Add the TB_FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FVP_TB_FW_CONFIG},--tb-fw-config,${FVP_TB_FW_CONFIG}))
+# Add the SOC_FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FVP_SOC_FW_CONFIG},--soc-fw-config,${FVP_SOC_FW_CONFIG}))
+# Add the NT_FW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FVP_NT_FW_CONFIG},--nt-fw-config,${FVP_NT_FW_CONFIG}))
+
+FDT_SOURCES		+=	${FVP_HW_CONFIG_DTS}
+$(eval FVP_HW_CONFIG	:=	${BUILD_PLAT}/$(patsubst %.dts,%.dtb,$(FVP_HW_CONFIG_DTS)))
+
+# Add the HW_CONFIG to FIP and specify the same to certtool
+$(eval $(call TOOL_ADD_PAYLOAD,${FVP_HW_CONFIG},--hw-config,${FVP_HW_CONFIG}))
+endif
+
+# Enable Activity Monitor Unit extensions by default
+ENABLE_AMU			:=	1
+
+# Enable dynamic mitigation support by default
+DYNAMIC_WORKAROUND_CVE_2018_3639	:=	1
+
+ifeq (${ENABLE_AMU},1)
+BL31_SOURCES		+=	lib/cpus/aarch64/cpuamu.c		\
+				lib/cpus/aarch64/cpuamu_helpers.S
+
+ifeq (${HW_ASSISTED_COHERENCY}, 1)
+BL31_SOURCES		+=	lib/cpus/aarch64/cortex_a75_pubsub.c	\
+				lib/cpus/aarch64/neoverse_n1_pubsub.c
+endif
+endif
+
+ifeq (${RAS_EXTENSION},1)
+BL31_SOURCES		+=	plat/arm/board/fvp/aarch64/fvp_ras.c
+endif
+
+ifneq (${ENABLE_STACK_PROTECTOR},0)
+PLAT_BL_COMMON_SOURCES	+=	plat/arm/board/fvp/fvp_stack_protector.c
+endif
+
+ifeq (${ARCH},aarch32)
+    NEED_BL32 := yes
+endif
+
+# Enable the dynamic translation tables library.
+ifeq ($(filter 1,${BL2_AT_EL3} ${ARM_XLAT_TABLES_LIB_V1}),)
+    ifeq (${ARCH},aarch32)
+        BL32_CPPFLAGS	+=	-DPLAT_XLAT_TABLES_DYNAMIC
+    else # AArch64
+        BL31_CPPFLAGS	+=	-DPLAT_XLAT_TABLES_DYNAMIC
+    endif
+endif
+
+ifeq (${ALLOW_RO_XLAT_TABLES}, 1)
+    ifeq (${ARCH},aarch32)
+        BL32_CPPFLAGS	+=	-DPLAT_RO_XLAT_TABLES
+    else # AArch64
+        BL31_CPPFLAGS	+=	-DPLAT_RO_XLAT_TABLES
+        ifeq (${SPD},tspd)
+            BL32_CPPFLAGS +=	-DPLAT_RO_XLAT_TABLES
+        endif
+    endif
+endif
+
+ifeq (${USE_DEBUGFS},1)
+    BL31_CPPFLAGS	+=	-DPLAT_XLAT_TABLES_DYNAMIC
+endif
+
+# Add support for platform supplied linker script for BL31 build
+$(eval $(call add_define,PLAT_EXTRA_LD_SCRIPT))
+
+ifneq (${BL2_AT_EL3}, 0)
+    override BL1_SOURCES =
+endif
+
+# Include Measured Boot makefile before any Crypto library makefile.
+# Crypto library makefile may need default definitions of Measured Boot build
+# flags present in Measured Boot makefile.
+ifeq (${MEASURED_BOOT},1)
+    RSS_MEASURED_BOOT_MK := drivers/measured_boot/rss/rss_measured_boot.mk
+    $(info Including ${RSS_MEASURED_BOOT_MK})
+    include ${RSS_MEASURED_BOOT_MK}
+
+    ifneq (${MBOOT_RSS_HASH_ALG}, sha256)
+        $(eval $(call add_define,TF_MBEDTLS_MBOOT_USE_SHA512))
+    endif
+
+    BL1_SOURCES		+=	${MEASURED_BOOT_SOURCES}
+    BL2_SOURCES		+=	${MEASURED_BOOT_SOURCES}
+endif
+
+include plat/arm/board/common/board_common.mk
+include plat/arm/common/arm_common.mk
+
+ifeq (${MEASURED_BOOT},1)
+BL1_SOURCES		+=	plat/arm/board/fvp/fvp_common_measured_boot.c	\
+				plat/arm/board/fvp/fvp_bl1_measured_boot.c	\
+				lib/psa/measured_boot.c
+
+BL2_SOURCES		+=	plat/arm/board/fvp/fvp_common_measured_boot.c	\
+				plat/arm/board/fvp/fvp_bl2_measured_boot.c	\
+				lib/psa/measured_boot.c
+
+# Note that attestation code does not depend on measured boot interfaces per se,
+# but the two features go together - attestation without boot measurements is
+# pretty much pointless...
+BL31_SOURCES		+=	lib/psa/delegated_attestation.c
+
+PLAT_INCLUDES		+=	-Iinclude/lib/psa
+
+# RSS is not supported on FVP right now. Thus, we use the mocked version
+# of the provided PSA APIs. They return with success and hard-coded data.
+PLAT_RSS_NOT_SUPPORTED	:= 1
+
+# Even though RSS is not supported on FVP (see above), we support overriding
+# PLAT_RSS_NOT_SUPPORTED from the command line, just for the purpose of building
+# the code to detect any build regressions. The resulting firmware will not be
+# functional.
+ifneq (${PLAT_RSS_NOT_SUPPORTED},1)
+    $(warning "RSS is not supported on FVP. The firmware will not be functional.")
+    include drivers/arm/rss/rss_comms.mk
+    BL1_SOURCES		+=	${RSS_COMMS_SOURCES}
+    BL2_SOURCES		+=	${RSS_COMMS_SOURCES}
+    BL31_SOURCES	+=	${RSS_COMMS_SOURCES}		\
+				lib/psa/delegated_attestation.c
+
+    BL1_CFLAGS		+=	-DPLAT_RSS_COMMS_PAYLOAD_MAX_SIZE=0
+    BL2_CFLAGS		+=	-DPLAT_RSS_COMMS_PAYLOAD_MAX_SIZE=0
+    BL31_CFLAGS		+=	-DPLAT_RSS_COMMS_PAYLOAD_MAX_SIZE=0
+endif
+
+endif
+
+ifeq (${DRTM_SUPPORT}, 1)
+BL31_SOURCES   += plat/arm/board/fvp/fvp_drtm_addr.c	\
+		  plat/arm/board/fvp/fvp_drtm_dma_prot.c	\
+		  plat/arm/board/fvp/fvp_drtm_err.c	\
+		  plat/arm/board/fvp/fvp_drtm_measurement.c	\
+		  plat/arm/board/fvp/fvp_drtm_stub.c	\
+		  plat/arm/common/arm_dyn_cfg.c		\
+		  plat/arm/board/fvp/fvp_err.c
+endif
+
+ifeq (${TRUSTED_BOARD_BOOT}, 1)
+BL1_SOURCES		+=	plat/arm/board/fvp/fvp_trusted_boot.c
+BL2_SOURCES		+=	plat/arm/board/fvp/fvp_trusted_boot.c
+
+# FVP being a development platform, enable capability to disable Authentication
+# dynamically if TRUSTED_BOARD_BOOT is set.
+DYN_DISABLE_AUTH	:=	1
+endif
+
+# enable trace buffer control registers access to NS by default
+ENABLE_TRBE_FOR_NS		:= 1
+
+# enable branch record buffer control registers access in NS by default
+# only enable for aarch64
+# do not enable when ENABLE_RME=1
+ifeq (${ARCH}, aarch64)
+ifeq (${ENABLE_RME},0)
+	ENABLE_BRBE_FOR_NS		:= 1
+endif
+endif
+
+# enable trace system registers access to NS by default
+ENABLE_SYS_REG_TRACE_FOR_NS	:= 1
+
+# enable trace filter control registers access to NS by default
+ENABLE_TRF_FOR_NS		:= 1
+
+ifeq (${SPMC_AT_EL3}, 1)
+PLAT_BL_COMMON_SOURCES	+=	plat/arm/board/fvp/fvp_el3_spmc.c
+endif
diff --git a/plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c b/plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c
new file mode 100644
index 0000000..9ab36a6
--- /dev/null
+++ b/plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c
@@ -0,0 +1,121 @@
+/*
+ * Copyright (c) 2016-2022, Arm Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <bl32/sp_min/platform_sp_min.h>
+#include <common/debug.h>
+#include <lib/fconf/fconf.h>
+#include <lib/fconf/fconf_dyn_cfg_getter.h>
+#include <plat/arm/common/plat_arm.h>
+
+#include "../fvp_private.h"
+
+void plat_arm_sp_min_early_platform_setup(u_register_t arg0, u_register_t arg1,
+			u_register_t arg2, u_register_t arg3)
+{
+	const struct dyn_cfg_dtb_info_t *tos_fw_config_info __unused;
+
+	/* Initialize the console to provide early debug support */
+	arm_console_boot_init();
+
+#if !RESET_TO_SP_MIN && !BL2_AT_EL3
+
+	INFO("SP_MIN FCONF: FW_CONFIG address = %lx\n", (uintptr_t)arg1);
+	/* Fill the properties struct with the info from the config dtb */
+	fconf_populate("FW_CONFIG", arg1);
+
+	tos_fw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, TOS_FW_CONFIG_ID);
+	if (tos_fw_config_info != NULL) {
+		arg1 = tos_fw_config_info->config_addr;
+	}
+#endif /* !RESET_TO_SP_MIN && !BL2_AT_EL3 */
+
+	arm_sp_min_early_platform_setup((void *)arg0, arg1, arg2, (void *)arg3);
+
+	/* Initialize the platform config for future decision making */
+	fvp_config_setup();
+
+	/*
+	 * Initialize the correct interconnect for this cluster during cold
+	 * boot. No need for locks as no other CPU is active.
+	 */
+	fvp_interconnect_init();
+
+	/*
+	 * Enable coherency in interconnect for the primary CPU's cluster.
+	 * Earlier bootloader stages might already do this (e.g. Trusted
+	 * Firmware's BL1 does it) but we can't assume so. There is no harm in
+	 * executing this code twice anyway.
+	 * FVP PSCI code will enable coherency for other clusters.
+	 */
+	fvp_interconnect_enable();
+}
+
+void sp_min_plat_arch_setup(void)
+{
+	int rc __unused;
+	const struct dyn_cfg_dtb_info_t *hw_config_info __unused;
+	uintptr_t hw_config_base_align __unused;
+	size_t mapped_size_align __unused;
+
+	arm_sp_min_plat_arch_setup();
+
+	/*
+	 * For RESET_TO_SP_MIN systems, SP_MIN(BL32) is the first bootloader
+	 * to run. So there is no BL2 to load the HW_CONFIG dtb into memory
+	 * before control is passed to SP_MIN.
+	 * Also, BL2 skips loading HW_CONFIG dtb for BL2_AT_EL3 builds.
+	 * The code below relies on dynamic mapping capability, which is not
+	 * supported by xlat tables lib V1.
+	 * TODO: remove the ARM_XLAT_TABLES_LIB_V1 check when its support
+	 * gets deprecated.
+	 */
+#if !RESET_TO_SP_MIN && !BL2_AT_EL3 && !ARM_XLAT_TABLES_LIB_V1
+	hw_config_info = FCONF_GET_PROPERTY(dyn_cfg, dtb, HW_CONFIG_ID);
+	assert(hw_config_info != NULL);
+	assert(hw_config_info->config_addr != 0UL);
+
+	INFO("SP_MIN FCONF: HW_CONFIG address = %p\n",
+	     (void *)hw_config_info->config_addr);
+
+	/*
+	 * Preferrably we expect this address and size are page aligned,
+	 * but if they are not then align it.
+	 */
+	hw_config_base_align = page_align(hw_config_info->config_addr, DOWN);
+	mapped_size_align = page_align(hw_config_info->config_max_size, UP);
+
+	if ((hw_config_info->config_addr != hw_config_base_align) &&
+	    (hw_config_info->config_max_size == mapped_size_align)) {
+		mapped_size_align += PAGE_SIZE;
+	}
+
+	/*
+	 * map dynamically HW config region with its aligned base address and
+	 * size
+	 */
+	rc = mmap_add_dynamic_region((unsigned long long)hw_config_base_align,
+				     hw_config_base_align,
+				     mapped_size_align,
+				     MT_RO_DATA);
+	if (rc != 0) {
+		ERROR("Error while mapping HW_CONFIG device tree (%d).\n", rc);
+		panic();
+	}
+
+	/* Populate HW_CONFIG device tree with the mapped address */
+	fconf_populate("HW_CONFIG", hw_config_info->config_addr);
+
+	/* unmap the HW_CONFIG memory region */
+	rc = mmap_remove_dynamic_region(hw_config_base_align, mapped_size_align);
+	if (rc != 0) {
+		ERROR("Error while unmapping HW_CONFIG device tree (%d).\n",
+		      rc);
+		panic();
+	}
+#endif /* !RESET_TO_SP_MIN && !BL2_AT_EL3 && !ARM_XLAT_TABLES_LIB_V1 */
+}
diff --git a/plat/arm/board/fvp/sp_min/sp_min-fvp.mk b/plat/arm/board/fvp/sp_min/sp_min-fvp.mk
new file mode 100644
index 0000000..183d802
--- /dev/null
+++ b/plat/arm/board/fvp/sp_min/sp_min-fvp.mk
@@ -0,0 +1,39 @@
+#
+# Copyright (c) 2016-2022, Arm Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+include common/fdt_wrappers.mk
+
+# SP_MIN source files specific to FVP platform
+BL32_SOURCES		+=	drivers/arm/fvp/fvp_pwrc.c			\
+				drivers/cfi/v2m/v2m_flash.c			\
+				lib/utils/mem_region.c				\
+				plat/arm/board/fvp/aarch32/fvp_helpers.S	\
+				plat/arm/board/fvp/fvp_pm.c			\
+				plat/arm/board/fvp/fvp_console.c		\
+				plat/arm/board/fvp/fvp_topology.c		\
+				plat/arm/board/fvp/sp_min/fvp_sp_min_setup.c	\
+				plat/arm/common/arm_nor_psci_mem_protect.c	\
+				${FVP_CPU_LIBS}					\
+				${FVP_GIC_SOURCES}				\
+				${FVP_INTERCONNECT_SOURCES}			\
+				${FVP_SECURITY_SOURCES}
+
+# Support for fconf in SP_MIN(BL32)
+# Added separately from the above list for better readability
+ifeq ($(filter 1,${BL2_AT_EL3} ${RESET_TO_SP_MIN}),)
+BL32_SOURCES		+=	lib/fconf/fconf.c				\
+				lib/fconf/fconf_dyn_cfg_getter.c		\
+				plat/arm/board/fvp/fconf/fconf_hw_config_getter.c \
+
+BL32_SOURCES		+=	${FDT_WRAPPERS_SOURCES}
+
+ifeq (${SEC_INT_DESC_IN_FCONF},1)
+BL32_SOURCES		+=	plat/arm/common/fconf/fconf_sec_intr_config.c
+endif
+
+endif
+
+include plat/arm/common/sp_min/arm_sp_min.mk
diff --git a/plat/arm/board/fvp/trp/trp-fvp.mk b/plat/arm/board/fvp/trp/trp-fvp.mk
new file mode 100644
index 0000000..a450541
--- /dev/null
+++ b/plat/arm/board/fvp/trp/trp-fvp.mk
@@ -0,0 +1,12 @@
+#
+# Copyright (c) 2021, Arm Limited. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# TRP source files specific to FVP platform
+
+RMM_SOURCES		+=	plat/arm/board/fvp/aarch64/fvp_helpers.S
+
+include plat/arm/common/trp/arm_trp.mk
+
diff --git a/plat/arm/board/fvp/tsp/fvp_tsp_setup.c b/plat/arm/board/fvp/tsp/fvp_tsp_setup.c
new file mode 100644
index 0000000..3c8a963
--- /dev/null
+++ b/plat/arm/board/fvp/tsp/fvp_tsp_setup.c
@@ -0,0 +1,17 @@
+/*
+ * Copyright (c) 2013-2015, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <plat/arm/common/plat_arm.h>
+
+#include "../fvp_private.h"
+
+void tsp_early_platform_setup(void)
+{
+	arm_tsp_early_platform_setup();
+
+	/* Initialize the platform config for future decision making */
+	fvp_config_setup();
+}
diff --git a/plat/arm/board/fvp/tsp/tsp-fvp.mk b/plat/arm/board/fvp/tsp/tsp-fvp.mk
new file mode 100644
index 0000000..ab3f225
--- /dev/null
+++ b/plat/arm/board/fvp/tsp/tsp-fvp.mk
@@ -0,0 +1,14 @@
+#
+# Copyright (c) 2013-2017, ARM Limited and Contributors. All rights reserved.
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+
+# TSP source files specific to FVP platform
+BL32_SOURCES		+=	drivers/arm/fvp/fvp_pwrc.c			\
+				plat/arm/board/fvp/aarch64/fvp_helpers.S	\
+				plat/arm/board/fvp/fvp_topology.c		\
+				plat/arm/board/fvp/tsp/fvp_tsp_setup.c		\
+				${FVP_GIC_SOURCES}
+
+include plat/arm/common/tsp/arm_tsp.mk