Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 89 insertions, 0 deletions

diff --git a/plat/arm/board/n1sdp/n1sdp_bl2_setup.c b/plat/arm/board/n1sdp/n1sdp_bl2_setup.c
new file mode 100644
index 0000000..5f8af9f
--- /dev/null
+++ b/plat/arm/board/n1sdp/n1sdp_bl2_setup.c
@@ -0,0 +1,89 @@
+/*
+ * Copyright (c) 2022, Arm Limited. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <common/debug.h>
+#include <drivers/arm/css/sds.h>
+#include <lib/mmio.h>
+#include <lib/utils.h>
+
+#include "n1sdp_def.h"
+#include <plat/arm/common/plat_arm.h>
+
+struct n1sdp_plat_info {
+	bool multichip_mode;
+	uint8_t secondary_count;
+	uint8_t local_ddr_size;
+	uint8_t remote_ddr_size;
+} __packed;
+
+/*
+ * N1SDP platform supports RDIMMs with ECC capability. To use the ECC
+ * capability, the entire DDR memory space has to be zeroed out before
+ * enabling the ECC bits in DMC620. Zeroing out several gigabytes of
+ * memory from SCP is quite time consuming so the following function
+ * is added to zero out the DDR memory from application processor which is
+ * much faster compared to SCP.
+ */
+
+void dmc_ecc_setup(uint8_t ddr_size_gb)
+{
+	uint64_t dram2_size;
+
+	dram2_size = (ddr_size_gb * 1024UL * 1024UL * 1024UL) -
+			ARM_DRAM1_SIZE;
+
+	INFO("Zeroing DDR memories\n");
+	zero_normalmem((void *)ARM_DRAM1_BASE, ARM_DRAM1_SIZE);
+	flush_dcache_range(ARM_DRAM1_BASE, ARM_DRAM1_SIZE);
+	zero_normalmem((void *)ARM_DRAM2_BASE, dram2_size);
+	flush_dcache_range(ARM_DRAM2_BASE, dram2_size);
+
+	INFO("Enabling ECC on DMCs\n");
+	/* Set DMCs to CONFIG state before writing ERR0CTLR0 register */
+	mmio_write_32(N1SDP_DMC0_MEMC_CMD_REG, N1SDP_DMC_MEMC_CMD_CONFIG);
+	mmio_write_32(N1SDP_DMC1_MEMC_CMD_REG, N1SDP_DMC_MEMC_CMD_CONFIG);
+
+	/* Enable ECC in DMCs */
+	mmio_setbits_32(N1SDP_DMC0_ERR0CTLR0_REG, N1SDP_DMC_ERR0CTLR0_ECC_EN);
+	mmio_setbits_32(N1SDP_DMC1_ERR0CTLR0_REG, N1SDP_DMC_ERR0CTLR0_ECC_EN);
+
+	/* Set DMCs to READY state */
+	mmio_write_32(N1SDP_DMC0_MEMC_CMD_REG, N1SDP_DMC_MEMC_CMD_READY);
+	mmio_write_32(N1SDP_DMC1_MEMC_CMD_REG, N1SDP_DMC_MEMC_CMD_READY);
+}
+
+void bl2_platform_setup(void)
+{
+	int ret;
+	struct n1sdp_plat_info plat_info;
+
+	ret = sds_init();
+	if (ret != SDS_OK) {
+		ERROR("SDS initialization failed\n");
+		panic();
+	}
+
+	ret = sds_struct_read(N1SDP_SDS_PLATFORM_INFO_STRUCT_ID,
+				N1SDP_SDS_PLATFORM_INFO_OFFSET,
+				&plat_info,
+				N1SDP_SDS_PLATFORM_INFO_SIZE,
+				SDS_ACCESS_MODE_NON_CACHED);
+	if (ret != SDS_OK) {
+		ERROR("Error getting platform info from SDS\n");
+		panic();
+	}
+	/* Validate plat_info SDS */
+	if ((plat_info.local_ddr_size == 0)
+		|| (plat_info.local_ddr_size > N1SDP_MAX_DDR_CAPACITY_GB)
+		|| (plat_info.remote_ddr_size > N1SDP_MAX_DDR_CAPACITY_GB)
+		|| (plat_info.secondary_count > N1SDP_MAX_SECONDARY_COUNT)) {
+		ERROR("platform info SDS is corrupted\n");
+		panic();
+	}
+
+	dmc_ecc_setup(plat_info.local_ddr_size);
+	arm_bl2_platform_setup();
+}