Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 375 insertions, 0 deletions

diff --git a/plat/brcm/board/stingray/driver/swreg.c b/plat/brcm/board/stingray/driver/swreg.c
new file mode 100644
index 0000000..2b7c53b
--- /dev/null
+++ b/plat/brcm/board/stingray/driver/swreg.c
@@ -0,0 +1,375 @@
+/*
+ * Copyright (c) 2017 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+#include <errno.h>
+#include <stdint.h>
+
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+
+#include <sr_utils.h>
+#include <swreg.h>
+
+#define MIN_VOLT                760000
+#define MAX_VOLT                1060000
+
+#define BSTI_WRITE              0x1
+#define BSTI_READ               0x2
+#define BSTI_COMMAND_TA         0x2
+#define BSTI_COMMAND_DATA       0xFF
+#define BSTI_CONTROL_VAL        0x81
+#define BSTI_CONTROL_BUSY       0x100
+#define BSTI_TOGGLE_BIT         0x2
+#define BSTI_CONFI_DONE_MASK    0xFFFFFFFD
+#define BSTI_REG_DATA_MASK      0xFFFF
+#define BSTI_CMD(sb, op, pa, ra, ta, data) \
+	((((sb) & 0x3) << 30) | (((op) & 0x3) << 28) | \
+	(((pa) & 0x1F) << 23) | (((ra) & 0x1F) << 18) | \
+	(((ta) & 0x3) << 16) | (data))
+
+#define PHY_REG0        0x0
+#define PHY_REG1        0x1
+#define PHY_REG4        0x4
+#define PHY_REG5        0x5
+#define PHY_REG6        0x6
+#define PHY_REG7        0x7
+#define PHY_REGC        0xc
+
+#define IHOST_VDDC_DATA 0x560
+#define DDR_CORE_DATA   0x2560
+#define UPDATE_POS_EDGE(data, set)    ((data) | ((set) << 1))
+
+/*
+ * Formula for SR A2 reworked board:
+ * step = ((vol/(1.4117 * 0.98)) - 500000)/3125
+ * where,
+ *      vol    - input voltage
+ *      500000 - Reference voltage
+ *      3125   - one step value
+ */
+#define A2_VOL_REF         500000
+#define ONE_STEP_VALUE  3125
+#define VOL_DIV(vol)    (((vol*10000ull)/(14117*98ull)) * 100ull)
+#define STEP_VALUE(vol) \
+	((((((VOL_DIV(vol)) - A2_VOL_REF) / ONE_STEP_VALUE) & 0xFF) << 8) | 4)
+
+#define B0_VOL_REF         ((500000/100)*98)
+#define B0_ONE_STEP_VALUE  3125
+/*
+ * Formula for SR B0 chip for IHOST12/03 and VDDC_CORE
+ * step = ((vol/1.56) - (500000 * 0.98))/3125
+ * where,
+ *      vol    - input voltage
+ *      500000 - Reference voltage
+ *      3125   - one step value
+ */
+#define B0_VOL_DIV(vol)    (((vol)*100ull)/156)
+#define B0_STEP_VALUE(vol) \
+	((((((B0_VOL_DIV(vol)) - B0_VOL_REF) / B0_ONE_STEP_VALUE) \
+		& 0xFF) << 8) | 4)
+
+/*
+ * Formula for SR B0 chip for DDR-CORE
+ * step = ((vol/1) - (500000 * 0.98))/3125
+ * where,
+ *      vol    - input voltage
+ *      500000 - Reference voltage
+ *      3125   - one step value
+ */
+#define B0_DDR_VDDC_VOL_DIV(vol)    ((vol)/1)
+#define B0_DDR_VDDC_STEP_VALUE(vol) \
+	((((((B0_DDR_VDDC_VOL_DIV(vol)) - B0_VOL_REF) / B0_ONE_STEP_VALUE) \
+		& 0xFF) << 8) | 4)
+
+#define MAX_SWREG_CNT       8
+#define MAX_ADDR_PER_SWREG  16
+#define MAX_REG_ADDR        0xF
+#define MIN_REG_ADDR        0x0
+
+static const char *sw_reg_name[MAX_SWREG_CNT] = {
+	"DDR_VDDC",
+	"IHOST03",
+	"IHOST12",
+	"IHOST_ARRAY",
+	"DDRIO_SLAVE",
+	"VDDC_CORE",
+	"VDDC1",
+	"DDRIO_MASTER"
+};
+
+/* firmware values for all SWREG for 3.3V input operation */
+static const uint16_t swreg_fm_data_bx[MAX_SWREG_CNT][MAX_ADDR_PER_SWREG] = {
+	/* DDR logic: Power Domains independent of 12v or 3p3v */
+	{0x25E0, 0x2D54, 0x0EC6, 0x01EC, 0x28BB, 0x1144, 0x0200, 0x69C0,
+	 0x0010, 0x0EDF, 0x90D7, 0x8000, 0x820C, 0x0003, 0x0001, 0x0000},
+
+	/* ihost03, 3p3V */
+	{0x05E0, 0x39E5, 0x03C1, 0x007C, 0x8BA9, 0x4444, 0x3300, 0x6B80,
+	 0x003F, 0x0FFF, 0x90D7, 0x8000, 0x240C, 0x0003, 0x0001, 0x0000},
+
+	/* ihost12 3p3v */
+	{0x05E0, 0x39E5, 0x03C1, 0x007C, 0x8BA9, 0x4444, 0x3300, 0x6B80,
+	 0x003F, 0x0FFF, 0x90D7, 0x8000, 0x240C, 0x0003, 0x0001, 0x0000},
+
+	/* ihost array */
+	{0x25E0, 0x2D94, 0x0EC6, 0x01EC, 0x2ABB, 0x1144, 0x0340, 0x69C0,
+	 0x0010, 0x0EDF, 0x90D7, 0x8000, 0x860C, 0x0003, 0x0001, 0x0000},
+
+	/* ddr io slave : 3p3v */
+	{0x0560, 0x4438, 0x0000, 0x001F, 0x8028, 0x4444, 0x0300, 0x4380,
+	 0x003F, 0x0FFF, 0x10D7, 0x8000, 0xA70C, 0x0003, 0x0001, 0x0000},
+
+	/* core master 3p3v */
+	{0x05E0, 0x39E5, 0x03C1, 0x007C, 0x8BA9, 0x4444, 0x3300, 0x6B80,
+	 0x003F, 0x0FFF, 0x90D7, 0x8000, 0x240C, 0x0003, 0x0001, 0x0000},
+
+	/* core slave 3p3v */
+	{0x0560, 0x4438, 0x0000, 0x001F, 0x8028, 0x4444, 0x0300, 0x4380,
+	 0x003F, 0x0FFF, 0x10D7, 0x8000, 0x240C, 0x0003, 0x0001, 0x0000},
+
+	/* ddr io master : 3p3v */
+	{0x05E0, 0x39E5, 0x03C1, 0x007C, 0x8BA9, 0x4444, 0x3300, 0x6B80,
+	 0x003F, 0x0FFF, 0x90D7, 0x8000, 0xA70C, 0x0003, 0x0001, 0x0000},
+};
+
+#define FM_DATA swreg_fm_data_bx
+
+static int swreg_poll(void)
+{
+	uint32_t data;
+	int retry = 100;
+
+	do {
+		data = mmio_read_32(BSTI_CONTROL_OFFSET);
+		if ((data & BSTI_CONTROL_BUSY) != BSTI_CONTROL_BUSY)
+			return 0;
+		retry--;
+		udelay(1);
+	} while (retry > 0);
+
+	return -ETIMEDOUT;
+}
+
+static int write_swreg_config(enum sw_reg reg_id, uint32_t addr, uint32_t data)
+{
+	uint32_t cmd;
+	int ret;
+
+	cmd = BSTI_CMD(0x1, BSTI_WRITE, reg_id, addr, BSTI_COMMAND_TA, data);
+	mmio_write_32(BSTI_CONTROL_OFFSET, BSTI_CONTROL_VAL);
+	mmio_write_32(BSTI_COMMAND_OFFSET, cmd);
+	ret = swreg_poll();
+	if (ret) {
+		ERROR("Failed to write swreg %s addr 0x%x\n",
+			sw_reg_name[reg_id-1], addr);
+		return ret;
+	}
+	return ret;
+}
+
+static int read_swreg_config(enum sw_reg reg_id, uint32_t addr, uint32_t *data)
+{
+	uint32_t cmd;
+	int ret;
+
+	cmd = BSTI_CMD(0x1, BSTI_READ, reg_id, addr, BSTI_COMMAND_TA, PHY_REG0);
+	mmio_write_32(BSTI_CONTROL_OFFSET, BSTI_CONTROL_VAL);
+	mmio_write_32(BSTI_COMMAND_OFFSET, cmd);
+	ret = swreg_poll();
+	if (ret) {
+		ERROR("Failed to read swreg %s addr 0x%x\n",
+			sw_reg_name[reg_id-1], addr);
+		return ret;
+	}
+
+	*data = mmio_read_32(BSTI_COMMAND_OFFSET);
+	*data &= BSTI_REG_DATA_MASK;
+	return ret;
+}
+
+static int swreg_config_done(enum sw_reg reg_id)
+{
+	uint32_t read_data;
+	int ret;
+
+	ret = read_swreg_config(reg_id, PHY_REG0, &read_data);
+	if (ret)
+		return ret;
+
+	read_data &= BSTI_CONFI_DONE_MASK;
+	read_data |= BSTI_TOGGLE_BIT;
+	ret = write_swreg_config(reg_id, PHY_REG0, read_data);
+	if (ret)
+		return ret;
+
+	ret = read_swreg_config(reg_id, PHY_REG0, &read_data);
+	if (ret)
+		return ret;
+
+	read_data &= BSTI_CONFI_DONE_MASK;
+	ret = write_swreg_config(reg_id, PHY_REG0, read_data);
+	if (ret)
+		return ret;
+
+	return ret;
+}
+
+#ifdef DUMP_SWREG
+static void dump_swreg_firmware(void)
+{
+	enum sw_reg reg_id;
+	uint32_t data;
+	int addr;
+	int ret;
+
+	for (reg_id = DDR_VDDC; reg_id <= DDRIO_MASTER; reg_id++) {
+		INFO("SWREG: %s\n", sw_reg_name[reg_id - 1]);
+		for (addr = MIN_REG_ADDR; addr <= MAX_REG_ADDR; addr++) {
+			ret = read_swreg_config(reg_id, addr, &data);
+			if (ret)
+				ERROR("Failed to read offset %d\n", addr);
+			INFO("\t0x%x: 0x%04x\n", addr, data);
+		}
+	}
+}
+#endif
+
+int set_swreg(enum sw_reg reg_id, uint32_t micro_volts)
+{
+	uint32_t step, programmed_step;
+	uint32_t data = IHOST_VDDC_DATA;
+	int ret;
+
+	if ((micro_volts > MAX_VOLT) || (micro_volts < MIN_VOLT)) {
+		ERROR("input voltage out-of-range\n");
+		ret = -EINVAL;
+		goto failed;
+	}
+
+	ret = read_swreg_config(reg_id, PHY_REGC, &programmed_step);
+	if (ret)
+		goto failed;
+
+	if (reg_id == DDR_VDDC)
+		step = B0_DDR_VDDC_STEP_VALUE(micro_volts);
+	else
+		step = B0_STEP_VALUE(micro_volts);
+
+	if ((step >> 8) != (programmed_step >> 8)) {
+		ret = write_swreg_config(reg_id, PHY_REGC, step);
+		if (ret)
+			goto failed;
+
+		if (reg_id == DDR_VDDC)
+			data = DDR_CORE_DATA;
+
+		ret = write_swreg_config(reg_id, PHY_REG0,
+					UPDATE_POS_EDGE(data, 1));
+		if (ret)
+			goto failed;
+
+		ret = write_swreg_config(reg_id, PHY_REG0,
+					UPDATE_POS_EDGE(data, 0));
+		if (ret)
+			goto failed;
+	}
+
+	INFO("%s voltage updated to %duV\n", sw_reg_name[reg_id-1],
+		micro_volts);
+	return ret;
+
+failed:
+	/*
+	 * Stop booting if voltages are not set
+	 * correctly. Booting will fail at random point
+	 * if we continue with wrong voltage settings.
+	 */
+	ERROR("Failed to set %s voltage to %duV\n", sw_reg_name[reg_id-1],
+		micro_volts);
+	assert(0);
+
+	return ret;
+}
+
+/* Update SWREG firmware for all power doman for A2 chip */
+int swreg_firmware_update(void)
+{
+	enum sw_reg reg_id;
+	uint32_t data;
+	int addr;
+	int ret;
+
+	/* write firmware values */
+	for (reg_id = DDR_VDDC; reg_id <= DDRIO_MASTER; reg_id++) {
+		/* write higher location first */
+		for (addr = MAX_REG_ADDR; addr >= MIN_REG_ADDR; addr--) {
+			ret = write_swreg_config(reg_id, addr,
+						 FM_DATA[reg_id - 1][addr]);
+			if (ret)
+				goto exit;
+		}
+	}
+
+	/* trigger SWREG firmware update */
+	for (reg_id = DDR_VDDC; reg_id <= DDRIO_MASTER; reg_id++) {
+		/*
+		 * Slave regulator doesn't have to be updated,
+		 * Updating Master is enough
+		 */
+		if ((reg_id == DDRIO_SLAVE) || (reg_id == VDDC1))
+			continue;
+
+		ret = swreg_config_done(reg_id);
+		if (ret) {
+			ERROR("Failed to trigger SWREG firmware update for %s\n"
+				, sw_reg_name[reg_id-1]);
+			return ret;
+		}
+	}
+
+	for (reg_id = DDR_VDDC; reg_id <= DDRIO_MASTER; reg_id++) {
+		/*
+		 * IHOST_ARRAY will be used on some boards like STRATUS and
+		 * there will not be any issue even if it is updated on other
+		 * boards where it is not used.
+		 */
+		if (reg_id == IHOST_ARRAY)
+			continue;
+
+		for (addr = MIN_REG_ADDR; addr <= MAX_REG_ADDR; addr++) {
+			ret = read_swreg_config(reg_id, addr, &data);
+			if (ret || (!ret &&
+				(data != FM_DATA[reg_id - 1][addr]))) {
+				ERROR("swreg fm update failed: %s at off %d\n",
+					sw_reg_name[reg_id - 1], addr);
+				ERROR("Read val: 0x%x, expected val: 0x%x\n",
+					data, FM_DATA[reg_id - 1][addr]);
+				return -1;
+			}
+		}
+	}
+
+	INFO("Updated SWREG firmware\n");
+
+#ifdef DUMP_SWREG
+	dump_swreg_firmware();
+#endif
+	return ret;
+
+exit:
+	/*
+	 * Stop booting if swreg firmware update fails.
+	 * Booting will fail at random point if we
+	 * continue with wrong voltage settings.
+	 */
+	ERROR("Failed to update firmware for %s SWREG\n",
+		sw_reg_name[reg_id-1]);
+	assert(0);
+
+	return ret;
+}