diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-28 09:13:47 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-28 09:13:47 +0000 |
commit | 102b0d2daa97dae68d3eed54d8fe37a9cc38a892 (patch) | |
tree | bcf648efac40ca6139842707f0eba5a4496a6dd2 /plat/nvidia/tegra/soc/t194/drivers/se | |
parent | Initial commit. (diff) | |
download | arm-trusted-firmware-upstream.tar.xz arm-trusted-firmware-upstream.zip |
Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'plat/nvidia/tegra/soc/t194/drivers/se')
-rw-r--r-- | plat/nvidia/tegra/soc/t194/drivers/se/se.c | 511 | ||||
-rw-r--r-- | plat/nvidia/tegra/soc/t194/drivers/se/se_private.h | 165 |
2 files changed, 676 insertions, 0 deletions
diff --git a/plat/nvidia/tegra/soc/t194/drivers/se/se.c b/plat/nvidia/tegra/soc/t194/drivers/se/se.c new file mode 100644 index 0000000..31b0e26 --- /dev/null +++ b/plat/nvidia/tegra/soc/t194/drivers/se/se.c @@ -0,0 +1,511 @@ +/* + * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved. + * Copyright (c) 2019-2020, NVIDIA CORPORATION. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#include <assert.h> +#include <errno.h> +#include <stdbool.h> + +#include <arch_helpers.h> +#include <bpmp_ipc.h> +#include <common/debug.h> +#include <drivers/delay_timer.h> +#include <lib/mmio.h> +#include <lib/psci/psci.h> +#include <se.h> +#include <tegra_platform.h> + +#include "se_private.h" + +/******************************************************************************* + * Constants and Macros + ******************************************************************************/ +#define ERR_STATUS_SW_CLEAR U(0xFFFFFFFF) +#define INT_STATUS_SW_CLEAR U(0xFFFFFFFF) +#define MAX_TIMEOUT_MS U(1000) /* Max. timeout of 1s */ +#define NUM_SE_REGS_TO_SAVE U(4) + +#define BYTES_IN_WORD U(4) +#define SHA256_MAX_HASH_RESULT U(7) +#define SHA256_DST_SIZE U(32) +#define SHA_FIRST_OP U(1) +#define MAX_SHA_ENGINE_CHUNK_SIZE U(0xFFFFFF) +#define SHA256_MSG_LENGTH_ONETIME U(0xFFFF) + +/******************************************************************************* + * Data structure and global variables + ******************************************************************************/ +static uint32_t se_regs[NUM_SE_REGS_TO_SAVE]; + +/* + * Check that SE operation has completed after kickoff. + * + * This function is invoked after an SE operation has been started, + * and it checks the following conditions: + * + * 1. SE_STATUS = IDLE + * 2. AHB bus data transfer is complete. + * 3. SE_ERR_STATUS is clean. + */ +static bool tegra_se_is_operation_complete(void) +{ + uint32_t val = 0, timeout = 0, sha_status, aes_status; + int32_t ret = 0; + bool se_is_busy, txn_has_errors, txn_successful; + + /* + * Poll the status register to check if the operation + * completed. + */ + do { + val = tegra_se_read_32(CTX_SAVE_AUTO_STATUS); + se_is_busy = ((val & CTX_SAVE_AUTO_SE_BUSY) != 0U); + + /* sleep until SE finishes */ + if (se_is_busy) { + mdelay(1); + timeout++; + } + + } while (se_is_busy && (timeout < MAX_TIMEOUT_MS)); + + /* any transaction errors? */ + txn_has_errors = (tegra_se_read_32(SHA_ERR_STATUS) != 0U) || + (tegra_se_read_32(AES0_ERR_STATUS) != 0U); + + /* transaction successful? */ + sha_status = tegra_se_read_32(SHA_INT_STATUS) & SHA_SE_OP_DONE; + aes_status = tegra_se_read_32(AES0_INT_STATUS) & AES0_SE_OP_DONE; + txn_successful = (sha_status == SHA_SE_OP_DONE) && + (aes_status == AES0_SE_OP_DONE); + + if ((timeout == MAX_TIMEOUT_MS) || txn_has_errors || !txn_successful) { + ERROR("%s: Atomic context save operation failed!\n", + __func__); + ret = -ECANCELED; + } + + return (ret == 0); +} + +/* + * Wait for SE engine to be idle and clear any pending interrupts, before + * starting the next SE operation. + */ +static bool tegra_se_is_ready(void) +{ + int32_t ret = 0; + uint32_t val = 0, timeout = 0; + bool se_is_ready; + + /* Wait for previous operation to finish */ + do { + val = tegra_se_read_32(CTX_SAVE_AUTO_STATUS); + se_is_ready = (val == CTX_SAVE_AUTO_SE_READY); + + /* sleep until SE is ready */ + if (!se_is_ready) { + mdelay(1); + timeout++; + } + + } while (!se_is_ready && (timeout < MAX_TIMEOUT_MS)); + + if (timeout == MAX_TIMEOUT_MS) { + ERROR("%s: SE is not ready!\n", __func__); + ret = -ETIMEDOUT; + } + + /* Clear any pending interrupts from previous operation */ + tegra_se_write_32(AES0_INT_STATUS, INT_STATUS_SW_CLEAR); + tegra_se_write_32(AES1_INT_STATUS, INT_STATUS_SW_CLEAR); + tegra_se_write_32(RSA_INT_STATUS, INT_STATUS_SW_CLEAR); + tegra_se_write_32(SHA_INT_STATUS, INT_STATUS_SW_CLEAR); + + /* Clear error status for each engine seen from current port */ + tegra_se_write_32(AES0_ERR_STATUS, ERR_STATUS_SW_CLEAR); + tegra_se_write_32(AES1_ERR_STATUS, ERR_STATUS_SW_CLEAR); + tegra_se_write_32(RSA_ERR_STATUS, ERR_STATUS_SW_CLEAR); + tegra_se_write_32(SHA_ERR_STATUS, ERR_STATUS_SW_CLEAR); + + return (ret == 0); +} + +/* + * During System Suspend, this handler triggers the hardware context + * save operation. + */ +static int32_t tegra_se_save_context(void) +{ + int32_t ret = -ECANCELED; + + /* + * 1. Ensure all SE Driver including RNG1/PKA1 are shut down. + * TSEC/R5s are powergated/idle. All tasks on SE1~SE4, RNG1, + * PKA1 are wrapped up. SE0 is ready for use. + * 2. Clear interrupt/error in SE0 status register. + * 3. Scrub SE0 register to avoid false failure for illegal + * configuration. Probably not needed, dependent on HW + * implementation. + * 4. Check SE is ready for HW CTX_SAVE by polling + * SE_CTX_SAVE_AUTO_STATUS.SE_READY. + * + * Steps 1-4 are executed by tegra_se_is_ready(). + * + * 5. Issue context save command. + * 6. Check SE is busy with CTX_SAVE, the command in step5 was not + * dropped for ongoing traffic in any of SE port/engine. + * 7. Poll SE register or wait for SE APB interrupt for task completion + * a. Polling: Read SE_CTX_SAVE_AUTO_STATUS.BUSY till it reports IDLE + * b. Interrupt: After receiving interrupt from SE APB, read + * SE_CTX_SAVE_AUTO_STATUS.BUSY till it reports IDLE. + * 8. Check AES0 and SHA ERR_STATUS to ensure no error case. + * 9. Check AES0 and SHA INT_STATUS to ensure operation has successfully + * completed. + * + * Steps 6-9 are executed by tegra_se_is_operation_complete(). + */ + if (tegra_se_is_ready()) { + + /* Issue context save command */ + tegra_se_write_32(AES0_OPERATION, SE_OP_CTX_SAVE); + + /* Wait for operation to finish */ + if (tegra_se_is_operation_complete()) { + ret = 0; + } + } + + return ret; +} + +/* + * Check that SE operation has completed after kickoff + * This function is invoked after an SE operation has been started, + * and it checks the following conditions: + * 1. SE0_INT_STATUS = SE0_OP_DONE + * 2. SE0_STATUS = IDLE + * 3. SE0_ERR_STATUS is clean. + */ +static int32_t tegra_se_sha256_hash_operation_complete(void) +{ + uint32_t val = 0U; + + /* Poll the SE interrupt register to ensure H/W operation complete */ + val = tegra_se_read_32(SE0_INT_STATUS_REG_OFFSET); + while (SE0_INT_OP_DONE(val) == SE0_INT_OP_DONE_CLEAR) { + val = tegra_se_read_32(SE0_INT_STATUS_REG_OFFSET); + if (SE0_INT_OP_DONE(val) != SE0_INT_OP_DONE_CLEAR) { + break; + } + } + + /* Poll the SE status idle to ensure H/W operation complete */ + val = tegra_se_read_32(SE0_SHA_STATUS_0); + while (val != SE0_SHA_STATUS_IDLE) { + val = tegra_se_read_32(SE0_SHA_STATUS_0); + if (val == SE0_SHA_STATUS_IDLE) { + break; + } + } + + /* Ensure that no errors are thrown during operation */ + val = tegra_se_read_32(SE0_ERR_STATUS_REG_OFFSET); + if (val != 0U) { + ERROR("%s: error during SE operation! 0x%x", __func__, + val); + return -ENOTSUP; + } + + return 0; +} + +/* + * Security engine primitive normal operations + */ +static int32_t tegra_se_start_normal_operation(uint64_t src_addr, + uint32_t nbytes, uint32_t last_buf, uint32_t src_len_inbytes) +{ + uint32_t val = 0U; + uint32_t src_in_lo; + uint32_t src_in_msb; + uint32_t src_in_hi; + int32_t ret = 0; + + if ((src_addr == 0ULL) || (nbytes == 0U)) + return -EINVAL; + + src_in_lo = (uint32_t)src_addr; + src_in_msb = (uint32_t)((src_addr >> 32U) & 0xFFU); + src_in_hi = ((src_in_msb << SE0_IN_HI_ADDR_HI_0_MSB_SHIFT) | + (nbytes & MAX_SHA_ENGINE_CHUNK_SIZE)); + + /* set SRC_IN_ADDR_LO and SRC_IN_ADDR_HI*/ + tegra_se_write_32(SE0_IN_ADDR, src_in_lo); + tegra_se_write_32(SE0_IN_HI_ADDR_HI, src_in_hi); + + val = tegra_se_read_32(SE0_INT_STATUS_REG_OFFSET); + if (val > 0U) { + tegra_se_write_32(SE0_INT_STATUS_REG_OFFSET, 0x0U); + } + + /* Enable SHA interrupt for SE0 Operation */ + tegra_se_write_32(SE0_SHA_INT_ENABLE, 0x1aU); + + /* flush to DRAM for SE to use the updated contents */ + flush_dcache_range(src_addr, src_len_inbytes); + + /* Start SHA256 operation */ + if (last_buf == 1U) { + tegra_se_write_32(SE0_OPERATION_REG_OFFSET, SE0_OP_START | + SE0_UNIT_OPERATION_PKT_LASTBUF_FIELD); + } else { + tegra_se_write_32(SE0_OPERATION_REG_OFFSET, SE0_OP_START); + } + + return ret; +} + +static int32_t tegra_se_calculate_sha256_hash(uint64_t src_addr, + uint32_t src_len_inbyte) +{ + uint32_t val, last_buf, i; + int32_t ret = 0; + uint32_t operations; + uint64_t src_len_inbits; + uint32_t len_bits_msb; + uint32_t len_bits_lsb; + uint32_t number_of_operations, max_bytes, bytes_left, remaining_bytes; + + if (src_len_inbyte > MAX_SHA_ENGINE_CHUNK_SIZE) { + ERROR("SHA input chunk size too big: 0x%x\n", src_len_inbyte); + return -EINVAL; + } + + if (src_addr == 0ULL) { + return -EINVAL; + } + + /* number of bytes per operation */ + max_bytes = (SHA256_HASH_SIZE_BYTES * SHA256_MSG_LENGTH_ONETIME); + + src_len_inbits = (uint32_t)(src_len_inbyte * 8U); + len_bits_msb = (uint32_t)(src_len_inbits >> 32U); + len_bits_lsb = (uint32_t)src_len_inbits; + + /* program SE0_CONFIG for SHA256 operation */ + val = (uint32_t)(SE0_CONFIG_ENC_ALG_SHA | SE0_CONFIG_ENC_MODE_SHA256 | + SE0_CONFIG_DEC_ALG_NOP | SE0_CONFIG_DST_HASHREG); + tegra_se_write_32(SE0_SHA_CONFIG, val); + + /* set SE0_SHA_MSG_LENGTH registers */ + tegra_se_write_32(SE0_SHA_MSG_LENGTH_0, len_bits_lsb); + tegra_se_write_32(SE0_SHA_MSG_LEFT_0, len_bits_lsb); + tegra_se_write_32(SE0_SHA_MSG_LENGTH_1, len_bits_msb); + + /* zero out unused SE0_SHA_MSG_LENGTH and SE0_SHA_MSG_LEFT */ + tegra_se_write_32(SE0_SHA_MSG_LENGTH_2, 0U); + tegra_se_write_32(SE0_SHA_MSG_LENGTH_3, 0U); + tegra_se_write_32(SE0_SHA_MSG_LEFT_1, 0U); + tegra_se_write_32(SE0_SHA_MSG_LEFT_2, 0U); + tegra_se_write_32(SE0_SHA_MSG_LEFT_3, 0U); + + number_of_operations = (src_len_inbyte / max_bytes); + remaining_bytes = (src_len_inbyte % max_bytes); + if (remaining_bytes > 0U) { + number_of_operations += 1U; + } + + /* + * 1. Operations == 1: program SE0_SHA_TASK register to initiate SHA256 + * hash generation by setting + * 1(SE0_SHA_CONFIG_HW_INIT_HASH) to SE0_SHA_TASK + * and start SHA256-normal operation. + * 2. 1 < Operations < number_of_operations: program SE0_SHA_TASK to + * 0(SE0_SHA_CONFIG_HW_INIT_HASH_DISABLE) to load + * intermediate SHA256 digest result from + * HASH_RESULT register to continue SHA256 + * generation and start SHA256-normal operation. + * 3. Operations == number_of_operations: continue with step 2 and set + * max_bytes to bytes_left to process final + * hash-result generation and start SHA256-normal + * operation. + */ + bytes_left = src_len_inbyte; + for (operations = 1U; operations <= number_of_operations; + operations++) { + if (operations == SHA_FIRST_OP) { + val = SE0_SHA_CONFIG_HW_INIT_HASH; + } else { + /* Load intermediate SHA digest result to + * SHA:HASH_RESULT(0..7) to continue the SHA + * calculation and tell the SHA engine to use it. + */ + for (i = 0U; (i / BYTES_IN_WORD) <= + SHA256_MAX_HASH_RESULT; i += BYTES_IN_WORD) { + val = tegra_se_read_32(SE0_SHA_HASH_RESULT_0 + + i); + tegra_se_write_32(SE0_SHA_HASH_RESULT_0 + i, + val); + } + val = SE0_SHA_CONFIG_HW_INIT_HASH_DISABLE; + if (len_bits_lsb <= (max_bytes * 8U)) { + len_bits_lsb = (remaining_bytes * 8U); + } else { + len_bits_lsb -= (max_bytes * 8U); + } + tegra_se_write_32(SE0_SHA_MSG_LEFT_0, len_bits_lsb); + } + tegra_se_write_32(SE0_SHA_TASK_CONFIG, val); + + max_bytes = (SHA256_HASH_SIZE_BYTES * + SHA256_MSG_LENGTH_ONETIME); + if (bytes_left < max_bytes) { + max_bytes = bytes_left; + last_buf = 1U; + } else { + bytes_left = bytes_left - max_bytes; + last_buf = 0U; + } + /* start operation */ + ret = tegra_se_start_normal_operation(src_addr, max_bytes, + last_buf, src_len_inbyte); + if (ret != 0) { + ERROR("Error during SE operation! 0x%x", ret); + return -EINVAL; + } + } + + return ret; +} + +static int32_t tegra_se_save_sha256_pmc_scratch(void) +{ + uint32_t val = 0U, hash_offset = 0U, scratch_offset = 0U; + int32_t ret; + + /* Check SE0 operation status */ + ret = tegra_se_sha256_hash_operation_complete(); + if (ret != 0) { + ERROR("SE operation complete Failed! 0x%x", ret); + return ret; + } + + for (scratch_offset = SECURE_SCRATCH_TZDRAM_SHA256_HASH_START; + scratch_offset <= SECURE_SCRATCH_TZDRAM_SHA256_HASH_END; + scratch_offset += BYTES_IN_WORD) { + val = tegra_se_read_32(SE0_SHA_HASH_RESULT_0 + hash_offset); + mmio_write_32((uint32_t)(TEGRA_SCRATCH_BASE + scratch_offset), + val); + hash_offset += BYTES_IN_WORD; + } + return 0; +} + +/* + * Handler to generate SHA256 and save HASH-result to pmc-scratch register + */ +int32_t tegra_se_calculate_save_sha256(uint64_t src_addr, + uint32_t src_len_inbyte) +{ + uint32_t security; + int32_t val = 0; + + /* Set SE_SOFT_SETTINGS=SE_SECURE to prevent NS process to change SE + * registers. + */ + security = tegra_se_read_32(SE0_SECURITY); + tegra_se_write_32(SE0_SECURITY, security | SE0_SECURITY_SE_SOFT_SETTING); + + /* Bootrom enable IN_ID bit in SE0_SHA_GSCID_0 register during SC7-exit, causing + * SE0 ignores SE0 operation, and therefore failure of 2nd iteration of SC7 cycle. + */ + tegra_se_write_32(SE0_SHA_GSCID_0, 0x0U); + + /* Calculate SHA256 of BL31 */ + val = tegra_se_calculate_sha256_hash(src_addr, src_len_inbyte); + if (val != 0) { + ERROR("%s: SHA256 generation failed\n", __func__); + return val; + } + + /* + * Reset SE_SECURE to previous value. + */ + tegra_se_write_32(SE0_SECURITY, security); + + /* copy sha256_dst to PMC Scratch register */ + val = tegra_se_save_sha256_pmc_scratch(); + if (val != 0) { + ERROR("%s: SE0 status Error.\n", __func__); + } + + return val; +} + +/* + * Handler to power down the SE hardware blocks - SE, RNG1 and PKA1. This + * needs to be called only during System Suspend. + */ +int32_t tegra_se_suspend(void) +{ + int32_t ret = 0; + + /* initialise communication channel with BPMP */ + assert(tegra_bpmp_ipc_init() == 0); + + /* Enable SE clock before SE context save */ + ret = tegra_bpmp_ipc_enable_clock(TEGRA194_CLK_SE); + assert(ret == 0); + + /* save SE registers */ + se_regs[0] = mmio_read_32(TEGRA_SE0_BASE + SE0_MUTEX_WATCHDOG_NS_LIMIT); + se_regs[1] = mmio_read_32(TEGRA_SE0_BASE + SE0_AES0_ENTROPY_SRC_AGE_CTRL); + se_regs[2] = mmio_read_32(TEGRA_RNG1_BASE + RNG1_MUTEX_WATCHDOG_NS_LIMIT); + se_regs[3] = mmio_read_32(TEGRA_PKA1_BASE + PKA1_MUTEX_WATCHDOG_NS_LIMIT); + + /* Save SE context. The BootROM restores it during System Resume */ + ret = tegra_se_save_context(); + if (ret != 0) { + ERROR("%s: context save failed (%d)\n", __func__, ret); + } + + /* Disable SE clock after SE context save */ + ret = tegra_bpmp_ipc_disable_clock(TEGRA194_CLK_SE); + assert(ret == 0); + + return ret; +} + +/* + * Handler to power up the SE hardware block(s) during System Resume. + */ +void tegra_se_resume(void) +{ + int32_t ret = 0; + + /* initialise communication channel with BPMP */ + assert(tegra_bpmp_ipc_init() == 0); + + /* Enable SE clock before SE context restore */ + ret = tegra_bpmp_ipc_enable_clock(TEGRA194_CLK_SE); + assert(ret == 0); + + /* + * When TZ takes over after System Resume, TZ should first reconfigure + * SE_MUTEX_WATCHDOG_NS_LIMIT, PKA1_MUTEX_WATCHDOG_NS_LIMIT, + * RNG1_MUTEX_WATCHDOG_NS_LIMIT and SE_ENTROPY_SRC_AGE_CTRL before + * other operations. + */ + mmio_write_32(TEGRA_SE0_BASE + SE0_MUTEX_WATCHDOG_NS_LIMIT, se_regs[0]); + mmio_write_32(TEGRA_SE0_BASE + SE0_AES0_ENTROPY_SRC_AGE_CTRL, se_regs[1]); + mmio_write_32(TEGRA_RNG1_BASE + RNG1_MUTEX_WATCHDOG_NS_LIMIT, se_regs[2]); + mmio_write_32(TEGRA_PKA1_BASE + PKA1_MUTEX_WATCHDOG_NS_LIMIT, se_regs[3]); + + /* Disable SE clock after SE context restore */ + ret = tegra_bpmp_ipc_disable_clock(TEGRA194_CLK_SE); + assert(ret == 0); +} diff --git a/plat/nvidia/tegra/soc/t194/drivers/se/se_private.h b/plat/nvidia/tegra/soc/t194/drivers/se/se_private.h new file mode 100644 index 0000000..fc118aa --- /dev/null +++ b/plat/nvidia/tegra/soc/t194/drivers/se/se_private.h @@ -0,0 +1,165 @@ +/* + * Copyright (c) 2020, ARM Limited and Contributors. All rights reserved. + * Copyright (c) 2019-2020, NVIDIA CORPORATION. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef SE_PRIVATE_H +#define SE_PRIVATE_H + +#include <lib/utils_def.h> +#include <tegra_def.h> + +/* SE0 security register */ +#define SE0_SECURITY U(0x18) +#define SE0_SECURITY_SE_SOFT_SETTING (((uint32_t)1) << 16U) + +/* SE0 SHA GSCID register */ +#define SE0_SHA_GSCID_0 U(0x100) + +/* SE0 config register */ +#define SE0_SHA_CONFIG U(0x104) +#define SE0_SHA_TASK_CONFIG U(0x108) +#define SE0_SHA_CONFIG_HW_INIT_HASH (((uint32_t)1) << 0U) +#define SE0_SHA_CONFIG_HW_INIT_HASH_DISABLE U(0) + +#define SE0_CONFIG_ENC_ALG_SHIFT U(12) +#define SE0_CONFIG_ENC_ALG_SHA \ + (((uint32_t)3) << SE0_CONFIG_ENC_ALG_SHIFT) +#define SE0_CONFIG_DEC_ALG_SHIFT U(8) +#define SE0_CONFIG_DEC_ALG_NOP \ + (((uint32_t)0) << SE0_CONFIG_DEC_ALG_SHIFT) +#define SE0_CONFIG_DST_SHIFT U(2) +#define SE0_CONFIG_DST_HASHREG \ + (((uint32_t)1) << SE0_CONFIG_DST_SHIFT) +#define SHA256_HASH_SIZE_BYTES U(256) + +#define SE0_CONFIG_ENC_MODE_SHIFT U(24) +#define SE0_CONFIG_ENC_MODE_SHA256 \ + (((uint32_t)5) << SE0_CONFIG_ENC_MODE_SHIFT) + +/* SHA input message length */ +#define SE0_IN_ADDR U(0x10c) +#define SE0_IN_HI_ADDR_HI U(0x110) +#define SE0_IN_HI_ADDR_HI_0_MSB_SHIFT U(24) + +/* SHA input message length */ +#define SE0_SHA_MSG_LENGTH_0 U(0x11c) +#define SE0_SHA_MSG_LENGTH_1 U(0x120) +#define SE0_SHA_MSG_LENGTH_2 U(0x124) +#define SE0_SHA_MSG_LENGTH_3 U(0x128) + +/* SHA input message left */ +#define SE0_SHA_MSG_LEFT_0 U(0x12c) +#define SE0_SHA_MSG_LEFT_1 U(0x130) +#define SE0_SHA_MSG_LEFT_2 U(0x134) +#define SE0_SHA_MSG_LEFT_3 U(0x138) + +/* SE HASH-RESULT */ +#define SE0_SHA_HASH_RESULT_0 U(0x13c) + +/* SE OPERATION */ +#define SE0_OPERATION_REG_OFFSET U(0x17c) +#define SE0_UNIT_OPERATION_PKT_LASTBUF_SHIFT U(16) +#define SE0_UNIT_OPERATION_PKT_LASTBUF_FIELD \ + ((uint32_t)0x1 << SE0_UNIT_OPERATION_PKT_LASTBUF_SHIFT) +#define SE0_OPERATION_SHIFT U(0) +#define SE0_OP_START \ + (((uint32_t)0x1) << SE0_OPERATION_SHIFT) + +/* SE Interrupt */ +#define SE0_SHA_INT_ENABLE U(0x180) + +#define SE0_INT_STATUS_REG_OFFSET U(0x184) +#define SE0_INT_OP_DONE_SHIFT U(4) +#define SE0_INT_OP_DONE_CLEAR \ + (((uint32_t)0U) << SE0_INT_OP_DONE_SHIFT) +#define SE0_INT_OP_DONE(x) \ + ((x) & (((uint32_t)0x1U) << SE0_INT_OP_DONE_SHIFT)) + +/* SE SHA Status */ +#define SE0_SHA_STATUS_0 U(0x188) +#define SE0_SHA_STATUS_IDLE U(0) + +/* SE error status */ +#define SE0_ERR_STATUS_REG_OFFSET U(0x18c) +#define SE0_ERR_STATUS_CLEAR U(0) + +/* SE error status */ +#define SECURE_SCRATCH_TZDRAM_SHA256_HASH_START SECURE_SCRATCH_RSV68_LO +#define SECURE_SCRATCH_TZDRAM_SHA256_HASH_END SECURE_SCRATCH_RSV71_HI + +/* SE0_INT_ENABLE_0 */ +#define SE0_INT_ENABLE U(0x88) +#define SE0_DISABLE_ALL_INT U(0x0) + +/* SE0_INT_STATUS_0 */ +#define SE0_INT_STATUS U(0x8C) +#define SE0_CLEAR_ALL_INT_STATUS U(0x3F) + +/* SE0_SHA_INT_STATUS_0 */ +#define SHA_INT_STATUS U(0x184) +#define SHA_SE_OP_DONE (U(1) << 4) + +/* SE0_SHA_ERR_STATUS_0 */ +#define SHA_ERR_STATUS U(0x18C) + +/* SE0_AES0_INT_STATUS_0 */ +#define AES0_INT_STATUS U(0x2F0) +#define AES0_SE_OP_DONE (U(1) << 4) + +/* SE0_AES0_ERR_STATUS_0 */ +#define AES0_ERR_STATUS U(0x2F8) + +/* SE0_AES1_INT_STATUS_0 */ +#define AES1_INT_STATUS U(0x4F0) + +/* SE0_AES1_ERR_STATUS_0 */ +#define AES1_ERR_STATUS U(0x4F8) + +/* SE0_RSA_INT_STATUS_0 */ +#define RSA_INT_STATUS U(0x758) + +/* SE0_RSA_ERR_STATUS_0 */ +#define RSA_ERR_STATUS U(0x760) + +/* SE0_AES0_OPERATION_0 */ +#define AES0_OPERATION U(0x238) +#define OP_MASK_BITS U(0x7) +#define SE_OP_CTX_SAVE U(0x3) + +/* SE0_AES0_CTX_SAVE_CONFIG_0 */ +#define CTX_SAVE_CONFIG U(0x2D4) + +/* SE0_AES0_CTX_SAVE_AUTO_STATUS_0 */ +#define CTX_SAVE_AUTO_STATUS U(0x300) +#define CTX_SAVE_AUTO_SE_READY U(0xFF) +#define CTX_SAVE_AUTO_SE_BUSY (U(0x1) << 31) + +/* SE0_AES0_CTX_SAVE_AUTO_CTRL_0 */ +#define CTX_SAVE_AUTO_CTRL U(0x304) +#define SE_CTX_SAVE_AUTO_EN (U(0x1) << 0) +#define SE_CTX_SAVE_AUTO_LOCK_EN (U(0x1) << 1) + +/* SE0_AES0_CTX_SAVE_AUTO_START_ADDR_0 */ +#define CTX_SAVE_AUTO_START_ADDR U(0x308) + +/* SE0_AES0_CTX_SAVE_AUTO_START_ADDR_HI_0 */ +#define CTX_SAVE_AUTO_START_ADDR_HI U(0x30C) + +/******************************************************************************* + * Inline functions definition + ******************************************************************************/ + +static inline uint32_t tegra_se_read_32(uint32_t offset) +{ + return mmio_read_32((uint32_t)(TEGRA_SE0_BASE + offset)); +} + +static inline void tegra_se_write_32(uint32_t offset, uint32_t val) +{ + mmio_write_32((uint32_t)(TEGRA_SE0_BASE + offset), val); +} + +#endif /* SE_PRIVATE_H */ |