Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 198 insertions, 0 deletions

diff --git a/plat/nxp/common/include/default/ch_3/soc_default_base_addr.h b/plat/nxp/common/include/default/ch_3/soc_default_base_addr.h
new file mode 100644
index 0000000..8d64f04
--- /dev/null
+++ b/plat/nxp/common/include/default/ch_3/soc_default_base_addr.h
@@ -0,0 +1,100 @@
+/*
+ * Copyright 2021-2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ *
+ */
+
+#ifndef SOC_DEFAULT_BASE_ADDR_H
+#define SOC_DEFAULT_BASE_ADDR_H
+
+/* CCSR mmu_def.h */
+#define NXP_CCSR_ADDR			0x1000000
+#define NXP_CCSR_SIZE			0xF000000
+
+#define NXP_DCSR_ADDR			0x700000000
+#define NXP_DCSR_SIZE			0x40000000
+
+/* Quad SPI Region #1 base address */
+#define NXP_QSPI_FLASH_ADDR		0x20000000
+
+/* IFC Region #1 base address */
+#define NXP_NOR_FLASH_ADDR		0x30000000
+
+/* MMU 500 */
+#define NXP_SMMU_ADDR			0x05000000
+
+#define NXP_SNVS_ADDR			0x01E90000
+
+#define NXP_DCFG_ADDR			0x01E00000
+#define NXP_PMU_CCSR_ADDR		0x01E30000
+#define NXP_PMU_DCSR_ADDR		0x700123000
+#define NXP_PMU_ADDR                    NXP_PMU_CCSR_ADDR
+#define NXP_SFP_ADDR			0x01E80000
+#define NXP_SCFG_ADDR			0x01FC0000
+#define NXP_I2C_ADDR			0x02000000
+#define NXP_ESDHC_ADDR			0x02140000
+#define NXP_ESDHC2_ADDR			0x02150000
+#ifndef NXP_UART_ADDR
+#define NXP_UART_ADDR			0x021C0500
+#endif
+#ifndef NXP_UART1_ADDR
+#define NXP_UART1_ADDR			0x021C0600
+#endif
+
+#define NXP_GPIO1_ADDR			0x02300000
+#define NXP_GPIO2_ADDR			0x02310000
+#define NXP_GPIO3_ADDR			0x02320000
+#define NXP_GPIO4_ADDR			0x02330000
+
+#define NXP_WDOG1_NS_ADDR		0x02390000
+#define NXP_WDOG2_NS_ADDR		0x023A0000
+#define NXP_WDOG1_TZ_ADDR		0x023B0000
+#define NXP_WDOG2_TZ_ADDR		0x023C0000
+
+#define NXP_TIMER_STATUS_ADDR		0x023F0000
+
+#define NXP_GICD_ADDR			0x06000000
+#define NXP_GICR_ADDR			0x06100000
+#define NXP_GICR_SGI_ADDR		0x06110000
+
+#define NXP_CAAM_ADDR			0x08000000
+
+#define NXP_TZC_ADDR			0x01100000
+#define NXP_TZC2_ADDR			0x01110000
+#define NXP_TZC3_ADDR			0x01120000
+
+#define NXP_RESET_ADDR			0x01E60000
+#define NXP_SEC_REGFILE_ADDR		0x01E88000
+
+#define NXP_RST_ADDR			0x01E88000
+
+/* DDR memory Map */
+#define NXP_DDR_ADDR			0x01080000
+#define NXP_DDR2_ADDR			0x01090000
+#define NXP_DDR3_ADDR			0x08210000
+
+/* QuadSPI base address */
+#define NXP_QSPI_ADDR			0x020C0000
+/* IFC base address */
+#define NXP_IFC_ADDR			0x02240000
+
+/* CCI400 base address */
+#define NXP_CCI_ADDR			0x04090000
+
+/* Global Generic Reference Timer base address */
+#define NXP_TIMER_ADDR			0x023E0000
+
+/* OCRAM TZPC base address */
+#define NXP_OCRAM_TZPC_ADDR		0x02200000
+
+#define NXP_EPU_ADDR			0x700060000
+
+#define NXP_CCN_ADDR			0x04000000
+#define NXP_CCN_HNI_ADDR		0x04080000
+#define NXP_CCN_HN_F_0_ADDR		0x04200000
+#define NXP_CCN_HN_F_1_ADDR		0x04210000
+
+#define TPMWAKEMR0_ADDR			0x700123c50
+
+#endif	/* SOC_DEFAULT_BASE_ADDR_H */
diff --git a/plat/nxp/common/include/default/ch_3/soc_default_helper_macros.h b/plat/nxp/common/include/default/ch_3/soc_default_helper_macros.h
new file mode 100644
index 0000000..8e68367
--- /dev/null
+++ b/plat/nxp/common/include/default/ch_3/soc_default_helper_macros.h
@@ -0,0 +1,98 @@
+/*
+ * Copyright 2022 NXP
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+#ifndef SOC_DEFAULT_HELPER_MACROS_H
+#define SOC_DEFAULT_HELPER_MACROS_H
+
+#ifdef NXP_OCRAM_TZPC_ADDR
+#define TZPC_BLOCK_SIZE			0x1000
+#endif
+
+/* Reset block register offsets */
+#ifdef NXP_RESET_ADDR
+
+/* Register Offset */
+#define RST_RSTCR_OFFSET		0x0
+#define RST_RSTRQMR1_OFFSET		0x10
+#define RST_RSTRQSR1_OFFSET		0x18
+#define BRR_OFFSET			0x60
+
+/* helper macros */
+#define RSTRQMR_RPTOE_MASK		(1 << 19)
+#endif /* NXP_RESET_ADDR */
+
+#define PCIeRC_RN_I_NODE_ID_OFFSET	0x8
+#define PoS_CONTROL_REG_OFFSET		0x0
+#define POS_EARLY_WR_COMP_EN		0x20
+#define HNI_POS_EN			0x01
+#define POS_TERMINATE_BARRIERS		0x10
+#define SERIALIZE_DEV_nGnRnE_WRITES	0x200
+#define ENABLE_ERR_SIGNAL_TO_MN		0x4
+#define ENABLE_RESERVE_BIT53		0x400
+#define ENABLE_WUO			0x10
+
+#define PORT_S0_CTRL_REG_RNI		0x010
+#define PORT_S1_CTRL_REG_RNI		0x110
+#define PORT_S2_CTRL_REG_RNI		0x210
+#define ENABLE_FORCE_RD_QUO		0x20
+#define QOS_SETTING			0x00FF000C
+
+/* epu register offsets and values */
+#define EPU_EPGCR_OFFSET		0x0
+#define EPU_EPIMCR10_OFFSET		0x128
+#define EPU_EPCTR10_OFFSET		0xa28
+#define EPU_EPCCR10_OFFSET		0x828
+#ifndef EPU_EPCCR10_VAL
+#define EPU_EPCCR10_VAL			0xb2800000
+#endif
+#define EPU_EPIMCR10_VAL		0xba000000
+#define EPU_EPCTR10_VAL			0x0
+#define EPU_EPGCR_VAL			(1 << 31)
+
+#ifdef NXP_CCN_ADDR
+#define NXP_CCN_HN_F_1_ADDR		0x04210000
+
+#define CCN_HN_F_SAM_NODEID_MASK	0x7f
+#define CCN_HN_F_SNP_DMN_CTL_OFFSET	0x200
+#define CCN_HN_F_SNP_DMN_CTL_SET_OFFSET	0x210
+#define CCN_HN_F_SNP_DMN_CTL_CLR_OFFSET	0x220
+#define CCN_HN_F_SNP_DMN_CTL_MASK	0x80a00
+#define CCN_HNF_NODE_COUNT              8
+#define CCN_HNF_OFFSET                  0x10000
+
+#define SA_AUX_CTRL_REG_OFFSET		0x500
+#define NUM_HNI_NODE			2
+#define CCN_HNI_MEMORY_MAP_SIZE		0x10000
+
+#define PCIeRC_RN_I_NODE_ID_OFFSET	0x8
+#define PoS_CONTROL_REG_OFFSET		0x0
+#define POS_EARLY_WR_COMP_EN		0x20
+#define HNI_POS_EN			0x01
+#define POS_TERMINATE_BARRIERS		0x10
+#define SERIALIZE_DEV_nGnRnE_WRITES	0x200
+#define ENABLE_ERR_SIGNAL_TO_MN		0x4
+#define ENABLE_RESERVE_BIT53		0x400
+#define ENABLE_WUO			0x10
+#endif
+
+/* reset register bit */
+#define RSTRQMR_RPTOE_MASK		(1 << 19)
+
+/* secmon register offsets and bitfields */
+#define SECMON_HPCOMR_OFFSET		0x4
+#define SECMON_HPCOMR_NPSWAEN		0x80000000
+
+/* Secure-Register-File register offsets and bit masks */
+#ifdef NXP_RST_ADDR
+/* Register Offset */
+#define CORE_HOLD_OFFSET		0x140
+#endif
+
+#define DCFG_SBEESR2_ADDR		0x00100534
+#define DCFG_MBEESR2_ADDR		0x00100544
+/* SBEESR and MBEESR bit mask */
+#define OCRAM_EESR_MASK			0x00000008
+
+#endif /* SOC_DEFAULT_HELPER_MACROS_H */