Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 150 insertions, 0 deletions

diff --git a/plat/qti/common/src/qti_bl31_setup.c b/plat/qti/common/src/qti_bl31_setup.c
new file mode 100644
index 0000000..dac0253
--- /dev/null
+++ b/plat/qti/common/src/qti_bl31_setup.c
@@ -0,0 +1,150 @@
+/*
+ * Copyright (c) 2018, ARM Limited and Contributors. All rights reserved.
+ * Copyright (c) 2018-2020, The Linux Foundation. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <bl31/bl31.h>
+#include <common/debug.h>
+#include <common/desc_image_load.h>
+#include <drivers/console.h>
+#include <drivers/generic_delay_timer.h>
+#include <lib/bl_aux_params/bl_aux_params.h>
+#include <lib/coreboot.h>
+#include <lib/spinlock.h>
+
+#include <platform.h>
+#include <qti_interrupt_svc.h>
+#include <qti_plat.h>
+#include <qti_uart_console.h>
+#include <qtiseclib_interface.h>
+
+/*
+ * Placeholder variables for copying the arguments that have been passed to
+ * BL31 from BL2.
+ */
+static entry_point_info_t bl33_image_ep_info;
+
+/*
+ * Variable to hold counter frequency for the CPU's generic timer. In this
+ * platform coreboot image configure counter frequency for boot core before
+ * reaching TF-A.
+ */
+static uint64_t g_qti_cpu_cntfrq;
+
+/*
+ * Variable to hold bl31 cold boot status. Default value 0x0 means yet to boot.
+ * Any other value means cold booted.
+ */
+uint32_t g_qti_bl31_cold_booted;
+
+/*******************************************************************************
+ * Perform any BL31 early platform setup common to ARM standard platforms.
+ * Here is an opportunity to copy parameters passed by the calling EL (S-EL1
+ * in BL2 & S-EL3 in BL1) before they are lost (potentially). This needs to be
+ * done before the MMU is initialized so that the memory layout can be used
+ * while creating page tables. BL2 has flushed this information to memory, so
+ * we are guaranteed to pick up good data.
+ ******************************************************************************/
+void bl31_early_platform_setup(u_register_t from_bl2,
+			       u_register_t plat_params_from_bl2)
+{
+
+	g_qti_cpu_cntfrq = read_cntfrq_el0();
+
+	bl_aux_params_parse(plat_params_from_bl2, NULL);
+
+#if COREBOOT
+	if (coreboot_serial.baseaddr != 0) {
+		static console_t g_qti_console_uart;
+
+		qti_console_uart_register(&g_qti_console_uart,
+					  coreboot_serial.baseaddr);
+	}
+#endif
+
+	/*
+	 * Tell BL31 where the non-trusted software image
+	 * is located and the entry state information
+	 */
+	bl31_params_parse_helper(from_bl2, NULL, &bl33_image_ep_info);
+}
+
+void bl31_early_platform_setup2(u_register_t arg0, u_register_t arg1,
+				u_register_t arg2, u_register_t arg3)
+{
+	bl31_early_platform_setup(arg0, arg1);
+}
+
+/*******************************************************************************
+ * Perform the very early platform specific architectural setup here. At the
+ * moment this only intializes the mmu in a quick and dirty way.
+ ******************************************************************************/
+void bl31_plat_arch_setup(void)
+{
+	qti_setup_page_tables(
+			      BL31_START,
+			      BL31_END-BL31_START,
+			      BL_CODE_BASE,
+			      BL_CODE_END,
+			      BL_RO_DATA_BASE,
+			      BL_RO_DATA_END
+			     );
+	enable_mmu_el3(0);
+}
+
+/*******************************************************************************
+ * Perform any BL31 platform setup common to ARM standard platforms
+ ******************************************************************************/
+void bl31_platform_setup(void)
+{
+	generic_delay_timer_init();
+	/* Initialize the GIC driver, CPU and distributor interfaces */
+	plat_qti_gic_driver_init();
+	plat_qti_gic_init();
+	qti_interrupt_svc_init();
+	qtiseclib_bl31_platform_setup();
+
+	/* set boot state to cold boot complete. */
+	g_qti_bl31_cold_booted = 0x1;
+}
+
+/*******************************************************************************
+ * Return a pointer to the 'entry_point_info' structure of the next image for the
+ * security state specified. BL33 corresponds to the non-secure image type
+ * while BL32 corresponds to the secure image type. A NULL pointer is returned
+ * if the image does not exist.
+ ******************************************************************************/
+entry_point_info_t *bl31_plat_get_next_image_ep_info(uint32_t type)
+{
+	/* QTI platform don't have BL32 implementation. */
+	assert(type == NON_SECURE);
+	assert(bl33_image_ep_info.h.type == PARAM_EP);
+	assert(bl33_image_ep_info.h.attr == NON_SECURE);
+	/*
+	 * None of the images on the platforms can have 0x0
+	 * as the entrypoint.
+	 */
+	if (bl33_image_ep_info.pc) {
+		return &bl33_image_ep_info;
+	} else {
+		return NULL;
+	}
+}
+
+/*******************************************************************************
+ * This function is used by the architecture setup code to retrieve the counter
+ * frequency for the CPU's generic timer. This value will be programmed into the
+ * CNTFRQ_EL0 register. In Arm standard platforms, it returns the base frequency
+ * of the system counter, which is retrieved from the first entry in the
+ * frequency modes table. This will be used later in warm boot (psci_arch_setup)
+ * of CPUs to set when CPU frequency.
+ ******************************************************************************/
+unsigned int plat_get_syscnt_freq2(void)
+{
+	assert(g_qti_cpu_cntfrq != 0);
+	return g_qti_cpu_cntfrq;
+}