Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 102 insertions, 0 deletions

diff --git a/plat/rockchip/rk3399/drivers/pmu/m0_ctl.c b/plat/rockchip/rk3399/drivers/pmu/m0_ctl.c
new file mode 100644
index 0000000..cad76ac
--- /dev/null
+++ b/plat/rockchip/rk3399/drivers/pmu/m0_ctl.c
@@ -0,0 +1,102 @@
+/*
+ * Copyright (c) 2016, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <assert.h>
+
+#include <arch_helpers.h>
+#include <common/debug.h>
+#include <drivers/delay_timer.h>
+#include <lib/mmio.h>
+
+#include <m0_ctl.h>
+#include <plat_private.h>
+#include <rk3399_def.h>
+#include <secure.h>
+#include <soc.h>
+
+void m0_init(void)
+{
+	/* secure config for M0 */
+	mmio_write_32(SGRF_BASE + SGRF_PMU_CON(0), WMSK_BIT(7));
+	mmio_write_32(SGRF_BASE + SGRF_SOC_CON(6), WMSK_BIT(12));
+
+	/* document is wrong, PMU_CRU_GATEDIS_CON0 do not need set MASK BIT */
+	mmio_setbits_32(PMUCRU_BASE + PMUCRU_GATEDIS_CON0, 0x02);
+
+	/*
+	 * To switch the parent to xin24M and div == 1,
+	 *
+	 * We need to close most of the PLLs and clocks except the OSC 24MHz
+	 * durning suspend, and this should be enough to supplies the ddrfreq,
+	 * For the simple handle, we just keep the fixed 24MHz to supply the
+	 * suspend and ddrfreq directly.
+	 */
+	mmio_write_32(PMUCRU_BASE + PMUCRU_CLKSEL_CON0,
+		      BIT_WITH_WMSK(15) | BITS_WITH_WMASK(0x0, 0x1f, 8));
+
+	mmio_write_32(PMUCRU_BASE + PMUCRU_CLKGATE_CON2, WMSK_BIT(5));
+}
+
+void m0_configure_execute_addr(uintptr_t addr)
+{
+	/* set the execute address for M0 */
+	mmio_write_32(SGRF_BASE + SGRF_PMU_CON(3),
+		      BITS_WITH_WMASK((addr >> 12) & 0xffff,
+				      0xffffu, 0));
+	mmio_write_32(SGRF_BASE + SGRF_PMU_CON(7),
+		      BITS_WITH_WMASK((addr >> 28) & 0xf,
+				      0xfu, 0));
+}
+
+void m0_start(void)
+{
+	/* enable clocks for M0 */
+	mmio_write_32(PMUCRU_BASE + PMUCRU_CLKGATE_CON2,
+		      BITS_WITH_WMASK(0x0, 0xf, 0));
+
+	/* clean the PARAM_M0_DONE flag, mean that M0 will start working */
+	mmio_write_32(M0_PARAM_ADDR + PARAM_M0_DONE, 0);
+	dmbst();
+
+	mmio_write_32(PMUCRU_BASE + PMUCRU_SOFTRST_CON0,
+		      BITS_WITH_WMASK(0x0, 0x4, 0));
+
+	udelay(5);
+	/* start M0 */
+	mmio_write_32(PMUCRU_BASE + PMUCRU_SOFTRST_CON0,
+		      BITS_WITH_WMASK(0x0, 0x20, 0));
+	dmbst();
+}
+
+void m0_stop(void)
+{
+	/* stop M0 */
+	mmio_write_32(PMUCRU_BASE + PMUCRU_SOFTRST_CON0,
+		      BITS_WITH_WMASK(0x24, 0x24, 0));
+
+	/* disable clocks for M0 */
+	mmio_write_32(PMUCRU_BASE + PMUCRU_CLKGATE_CON2,
+		      BITS_WITH_WMASK(0xf, 0xf, 0));
+}
+
+void m0_wait_done(void)
+{
+	do {
+		/*
+		 * Don't starve the M0 for access to SRAM, so delay before
+		 * reading the PARAM_M0_DONE value again.
+		 */
+		udelay(5);
+		dsb();
+	} while (mmio_read_32(M0_PARAM_ADDR + PARAM_M0_DONE) != M0_DONE_FLAG);
+
+	/*
+	 * Let the M0 settle into WFI before we leave. This is so we don't reset
+	 * the M0 in a bad spot which can cause problems with the M0.
+	 */
+	udelay(10);
+	dsb();
+}