Adding upstream version 2.8.0+dfsg.upstream/2.8.0+dfsgupstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 2705 insertions, 0 deletions

diff --git a/plat/ti/k3/common/drivers/ti_sci/ti_sci.c b/plat/ti/k3/common/drivers/ti_sci/ti_sci.c
new file mode 100644
index 0000000..2cbfa3d
--- /dev/null
+++ b/plat/ti/k3/common/drivers/ti_sci/ti_sci.c
@@ -0,0 +1,1739 @@
+/*
+ * Texas Instruments System Control Interface Driver
+ *   Based on Linux and U-Boot implementation
+ *
+ * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <errno.h>
+#include <stdbool.h>
+#include <stddef.h>
+#include <string.h>
+
+#include <platform_def.h>
+
+#include <common/debug.h>
+#include <sec_proxy.h>
+
+#include "ti_sci_protocol.h"
+#include "ti_sci.h"
+
+#if USE_COHERENT_MEM
+__section("tzfw_coherent_mem")
+#endif
+static uint8_t message_sequence;
+
+/**
+ * struct ti_sci_xfer - Structure representing a message flow
+ * @tx_message:	Transmit message
+ * @rx_message:	Receive message
+ */
+struct ti_sci_xfer {
+	struct k3_sec_proxy_msg tx_message;
+	struct k3_sec_proxy_msg rx_message;
+};
+
+/**
+ * ti_sci_setup_one_xfer() - Setup one message type
+ *
+ * @msg_type:	Message type
+ * @msg_flags:	Flag to set for the message
+ * @tx_buf:	Buffer to be sent to mailbox channel
+ * @tx_message_size: transmit message size
+ * @rx_buf:	Buffer to be received from mailbox channel
+ * @rx_message_size: receive message size
+ *
+ * Helper function which is used by various command functions that are
+ * exposed to clients of this driver for allocating a message traffic event.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+static int ti_sci_setup_one_xfer(uint16_t msg_type, uint32_t msg_flags,
+				 void *tx_buf,
+				 size_t tx_message_size,
+				 void *rx_buf,
+				 size_t rx_message_size,
+				 struct ti_sci_xfer *xfer)
+{
+	struct ti_sci_msg_hdr *hdr;
+
+	/* Ensure we have sane transfer sizes */
+	if (rx_message_size > TI_SCI_MAX_MESSAGE_SIZE ||
+	    tx_message_size > TI_SCI_MAX_MESSAGE_SIZE ||
+	    rx_message_size < sizeof(*hdr) ||
+	    tx_message_size < sizeof(*hdr))
+		return -ERANGE;
+
+	hdr = (struct ti_sci_msg_hdr *)tx_buf;
+	hdr->seq = ++message_sequence;
+	hdr->type = msg_type;
+	hdr->host = TI_SCI_HOST_ID;
+	hdr->flags = msg_flags | TI_SCI_FLAG_REQ_ACK_ON_PROCESSED;
+
+	xfer->tx_message.buf = tx_buf;
+	xfer->tx_message.len = tx_message_size;
+
+	xfer->rx_message.buf = rx_buf;
+	xfer->rx_message.len = rx_message_size;
+
+	return 0;
+}
+
+/**
+ * ti_sci_get_response() - Receive response from mailbox channel
+ *
+ * @xfer:	Transfer to initiate and wait for response
+ * @chan:	Channel to receive the response
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+static inline int ti_sci_get_response(struct ti_sci_xfer *xfer,
+				      enum k3_sec_proxy_chan_id chan)
+{
+	struct k3_sec_proxy_msg *msg = &xfer->rx_message;
+	struct ti_sci_msg_hdr *hdr;
+	unsigned int retry = 5;
+	int ret;
+
+	for (; retry > 0; retry--) {
+		/* Receive the response */
+		ret = k3_sec_proxy_recv(chan, msg);
+		if (ret) {
+			ERROR("Message receive failed (%d)\n", ret);
+			return ret;
+		}
+
+		/* msg is updated by Secure Proxy driver */
+		hdr = (struct ti_sci_msg_hdr *)msg->buf;
+
+		/* Sanity check for message response */
+		if (hdr->seq == message_sequence)
+			break;
+		else
+			WARN("Message with sequence ID %u is not expected\n", hdr->seq);
+	}
+	if (!retry) {
+		ERROR("Timed out waiting for message\n");
+		return -EINVAL;
+	}
+
+	if (msg->len > TI_SCI_MAX_MESSAGE_SIZE) {
+		ERROR("Unable to handle %lu xfer (max %d)\n",
+		      msg->len, TI_SCI_MAX_MESSAGE_SIZE);
+		return -EINVAL;
+	}
+
+	if (!(hdr->flags & TI_SCI_FLAG_RESP_GENERIC_ACK))
+		return -ENODEV;
+
+	return 0;
+}
+
+/**
+ * ti_sci_do_xfer() - Do one transfer
+ *
+ * @xfer:	Transfer to initiate and wait for response
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+static inline int ti_sci_do_xfer(struct ti_sci_xfer *xfer)
+{
+	struct k3_sec_proxy_msg *msg = &xfer->tx_message;
+	int ret;
+
+	/* Clear any spurious messages in receive queue */
+	ret = k3_sec_proxy_clear_rx_thread(SP_RESPONSE);
+	if (ret) {
+		ERROR("Could not clear response queue (%d)\n", ret);
+		return ret;
+	}
+
+	/* Send the message */
+	ret = k3_sec_proxy_send(SP_HIGH_PRIORITY, msg);
+	if (ret) {
+		ERROR("Message sending failed (%d)\n", ret);
+		return ret;
+	}
+
+	/* Get the response */
+	ret = ti_sci_get_response(xfer, SP_RESPONSE);
+	if (ret) {
+		ERROR("Failed to get response (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_get_revision() - Get the revision of the SCI entity
+ *
+ * Updates the SCI information in the internal data structure.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_get_revision(struct ti_sci_msg_resp_version *rev_info)
+{
+	struct ti_sci_msg_hdr hdr;
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_VERSION, 0x0,
+				    &hdr, sizeof(hdr),
+				    rev_info, sizeof(*rev_info),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_device_set_state() - Set device state
+ *
+ * @id:		Device identifier
+ * @flags:	flags to setup for the device
+ * @state:	State to move the device to
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+static int ti_sci_device_set_state(uint32_t id, uint32_t flags, uint8_t state)
+{
+	struct ti_sci_msg_req_set_device_state req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_SET_DEVICE_STATE, flags,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.id = id;
+	req.state = state;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_device_get_state() - Get device state
+ *
+ * @id:		Device Identifier
+ * @clcnt:	Pointer to Context Loss Count
+ * @resets:	pointer to resets
+ * @p_state:	pointer to p_state
+ * @c_state:	pointer to c_state
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+static int ti_sci_device_get_state(uint32_t id,  uint32_t *clcnt,
+				   uint32_t *resets, uint8_t *p_state,
+				   uint8_t *c_state)
+{
+	struct ti_sci_msg_req_get_device_state req;
+	struct ti_sci_msg_resp_get_device_state resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	if (!clcnt && !resets && !p_state && !c_state)
+		return -EINVAL;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_GET_DEVICE_STATE, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.id = id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	if (clcnt)
+		*clcnt = resp.context_loss_count;
+	if (resets)
+		*resets = resp.resets;
+	if (p_state)
+		*p_state = resp.programmed_state;
+	if (c_state)
+		*c_state = resp.current_state;
+
+	return 0;
+}
+
+/**
+ * ti_sci_device_get() - Request for device managed by TISCI
+ *
+ * @id:		Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_get(uint32_t id)
+{
+	return ti_sci_device_set_state(id, 0, MSG_DEVICE_SW_STATE_ON);
+}
+
+/**
+ * ti_sci_device_get_exclusive() - Exclusive request for device managed by TISCI
+ *
+ * @id:		Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * NOTE: This _exclusive version of the get API is for exclusive access to the
+ * device. Any other host in the system will fail to get this device after this
+ * call until exclusive access is released with device_put or a non-exclusive
+ * set call.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_get_exclusive(uint32_t id)
+{
+	return ti_sci_device_set_state(id,
+				       MSG_FLAG_DEVICE_EXCLUSIVE,
+				       MSG_DEVICE_SW_STATE_ON);
+}
+
+/**
+ * ti_sci_device_idle() - Idle a device managed by TISCI
+ *
+ * @id:		Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_idle(uint32_t id)
+{
+	return ti_sci_device_set_state(id, 0, MSG_DEVICE_SW_STATE_RETENTION);
+}
+
+/**
+ * ti_sci_device_idle_exclusive() - Exclusive idle a device managed by TISCI
+ *
+ * @id:		Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * NOTE: This _exclusive version of the idle API is for exclusive access to
+ * the device. Any other host in the system will fail to get this device after
+ * this call until exclusive access is released with device_put or a
+ * non-exclusive set call.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_idle_exclusive(uint32_t id)
+{
+	return ti_sci_device_set_state(id,
+				       MSG_FLAG_DEVICE_EXCLUSIVE,
+				       MSG_DEVICE_SW_STATE_RETENTION);
+}
+
+/**
+ * ti_sci_device_put() - Release a device managed by TISCI
+ *
+ * @id:		Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_put(uint32_t id)
+{
+	return ti_sci_device_set_state(id, 0, MSG_DEVICE_SW_STATE_AUTO_OFF);
+}
+
+/**
+ * ti_sci_device_put_no_wait() - Release a device without requesting or waiting
+ *				 for a response.
+ *
+ * @id:		Device Identifier
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_put_no_wait(uint32_t id)
+{
+	struct ti_sci_msg_req_set_device_state req;
+	struct ti_sci_msg_hdr *hdr;
+	struct k3_sec_proxy_msg tx_message;
+	int ret;
+
+	/* Ensure we have sane transfer size */
+	if (sizeof(req) > TI_SCI_MAX_MESSAGE_SIZE)
+		return -ERANGE;
+
+	hdr = (struct ti_sci_msg_hdr *)&req;
+	hdr->seq = ++message_sequence;
+	hdr->type = TI_SCI_MSG_SET_DEVICE_STATE;
+	hdr->host = TI_SCI_HOST_ID;
+	/* Setup with NORESPONSE flag to keep response queue clean */
+	hdr->flags = TI_SCI_FLAG_REQ_GENERIC_NORESPONSE;
+
+	req.id = id;
+	req.state = MSG_DEVICE_SW_STATE_AUTO_OFF;
+
+	tx_message.buf = (uint8_t *)&req;
+	tx_message.len = sizeof(req);
+
+	 /* Send message */
+	ret = k3_sec_proxy_send(SP_HIGH_PRIORITY, &tx_message);
+	if (ret) {
+		ERROR("Message sending failed (%d)\n", ret);
+		return ret;
+	}
+
+	/* Return without waiting for response */
+	return 0;
+}
+
+/**
+ * ti_sci_device_is_valid() - Is the device valid
+ *
+ * @id:		Device Identifier
+ *
+ * Return: 0 if all goes well and the device ID is valid, else return
+ *         appropriate error
+ */
+int ti_sci_device_is_valid(uint32_t id)
+{
+	uint8_t unused;
+
+	/* check the device state which will also tell us if the ID is valid */
+	return ti_sci_device_get_state(id, NULL, NULL, NULL, &unused);
+}
+
+/**
+ * ti_sci_device_get_clcnt() - Get context loss counter
+ *
+ * @id:		Device Identifier
+ * @count:	Pointer to Context Loss counter to populate
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_get_clcnt(uint32_t id, uint32_t *count)
+{
+	return ti_sci_device_get_state(id, count, NULL, NULL, NULL);
+}
+
+/**
+ * ti_sci_device_is_idle() - Check if the device is requested to be idle
+ *
+ * @id:		Device Identifier
+ * @r_state:	true if requested to be idle
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_is_idle(uint32_t id, bool *r_state)
+{
+	int ret;
+	uint8_t state;
+
+	if (!r_state)
+		return -EINVAL;
+
+	ret = ti_sci_device_get_state(id, NULL, NULL, &state, NULL);
+	if (ret)
+		return ret;
+
+	*r_state = (state == MSG_DEVICE_SW_STATE_RETENTION);
+
+	return 0;
+}
+
+/**
+ * ti_sci_device_is_stop() - Check if the device is requested to be stopped
+ *
+ * @id:		Device Identifier
+ * @r_state:	true if requested to be stopped
+ * @curr_state:	true if currently stopped
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_is_stop(uint32_t id, bool *r_state,  bool *curr_state)
+{
+	int ret;
+	uint8_t p_state, c_state;
+
+	if (!r_state && !curr_state)
+		return -EINVAL;
+
+	ret = ti_sci_device_get_state(id, NULL, NULL, &p_state, &c_state);
+	if (ret)
+		return ret;
+
+	if (r_state)
+		*r_state = (p_state == MSG_DEVICE_SW_STATE_AUTO_OFF);
+	if (curr_state)
+		*curr_state = (c_state == MSG_DEVICE_HW_STATE_OFF);
+
+	return 0;
+}
+
+/**
+ * ti_sci_device_is_on() - Check if the device is requested to be ON
+ *
+ * @id:		Device Identifier
+ * @r_state:	true if requested to be ON
+ * @curr_state:	true if currently ON and active
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_is_on(uint32_t id, bool *r_state,  bool *curr_state)
+{
+	int ret;
+	uint8_t p_state, c_state;
+
+	if (!r_state && !curr_state)
+		return -EINVAL;
+
+	ret =
+	    ti_sci_device_get_state(id, NULL, NULL, &p_state, &c_state);
+	if (ret)
+		return ret;
+
+	if (r_state)
+		*r_state = (p_state == MSG_DEVICE_SW_STATE_ON);
+	if (curr_state)
+		*curr_state = (c_state == MSG_DEVICE_HW_STATE_ON);
+
+	return 0;
+}
+
+/**
+ * ti_sci_device_is_trans() - Check if the device is currently transitioning
+ *
+ * @id:		Device Identifier
+ * @curr_state:	true if currently transitioning
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_is_trans(uint32_t id, bool *curr_state)
+{
+	int ret;
+	uint8_t state;
+
+	if (!curr_state)
+		return -EINVAL;
+
+	ret = ti_sci_device_get_state(id, NULL, NULL, NULL, &state);
+	if (ret)
+		return ret;
+
+	*curr_state = (state == MSG_DEVICE_HW_STATE_TRANS);
+
+	return 0;
+}
+
+/**
+ * ti_sci_device_set_resets() - Set resets for device managed by TISCI
+ *
+ * @id:			Device Identifier
+ * @reset_state:	Device specific reset bit field
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_set_resets(uint32_t id, uint32_t reset_state)
+{
+	struct ti_sci_msg_req_set_device_resets req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_SET_DEVICE_RESETS, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.id = id;
+	req.resets = reset_state;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_device_get_resets() - Get reset state for device managed by TISCI
+ *
+ * @id:			Device Identifier
+ * @reset_state:	Pointer to reset state to populate
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_device_get_resets(uint32_t id, uint32_t *reset_state)
+{
+	return ti_sci_device_get_state(id, NULL, reset_state, NULL, NULL);
+}
+
+/**
+ * ti_sci_clock_set_state() - Set clock state helper
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request,
+ *		Each device has its own set of clock inputs, This indexes
+ *		which clock input to modify
+ * @flags:	Header flags as needed
+ * @state:	State to request for the clock
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_set_state(uint32_t dev_id, uint8_t clk_id,
+			   uint32_t flags, uint8_t state)
+{
+	struct ti_sci_msg_req_set_clock_state req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_SET_CLOCK_STATE, flags,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.dev_id = dev_id;
+	req.clk_id = clk_id;
+	req.request_state = state;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_get_state() - Get clock state helper
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @programmed_state:	State requested for clock to move to
+ * @current_state:	State that the clock is currently in
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_get_state(uint32_t dev_id, uint8_t clk_id,
+			   uint8_t *programmed_state,
+			   uint8_t *current_state)
+{
+	struct ti_sci_msg_req_get_clock_state req;
+	struct ti_sci_msg_resp_get_clock_state resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	if (!programmed_state && !current_state)
+		return -EINVAL;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_GET_CLOCK_STATE, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.dev_id = dev_id;
+	req.clk_id = clk_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	if (programmed_state)
+		*programmed_state = resp.programmed_state;
+	if (current_state)
+		*current_state = resp.current_state;
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_get() - Get control of a clock from TI SCI
+
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @needs_ssc: 'true' iff Spread Spectrum clock is desired
+ * @can_change_freq: 'true' iff frequency change is desired
+ * @enable_input_term: 'true' iff input termination is desired
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_get(uint32_t dev_id, uint8_t clk_id,
+		     bool needs_ssc, bool can_change_freq,
+		     bool enable_input_term)
+{
+	uint32_t flags = 0;
+
+	flags |= needs_ssc ? MSG_FLAG_CLOCK_ALLOW_SSC : 0;
+	flags |= can_change_freq ? MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE : 0;
+	flags |= enable_input_term ? MSG_FLAG_CLOCK_INPUT_TERM : 0;
+
+	return ti_sci_clock_set_state(dev_id, clk_id, flags,
+				      MSG_CLOCK_SW_STATE_REQ);
+}
+
+/**
+ * ti_sci_clock_idle() - Idle a clock which is in our control
+
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ *
+ * NOTE: This clock must have been requested by get_clock previously.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_idle(uint32_t dev_id, uint8_t clk_id)
+{
+	return ti_sci_clock_set_state(dev_id, clk_id, 0,
+				      MSG_CLOCK_SW_STATE_UNREQ);
+}
+
+/**
+ * ti_sci_clock_put() - Release a clock from our control
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ *
+ * NOTE: This clock must have been requested by get_clock previously.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_put(uint32_t dev_id, uint8_t clk_id)
+{
+	return ti_sci_clock_set_state(dev_id, clk_id, 0,
+				      MSG_CLOCK_SW_STATE_AUTO);
+}
+
+/**
+ * ti_sci_clock_is_auto() - Is the clock being auto managed
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @req_state: state indicating if the clock is auto managed
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_is_auto(uint32_t dev_id, uint8_t clk_id, bool *req_state)
+{
+	uint8_t state = 0;
+	int ret;
+
+	if (!req_state)
+		return -EINVAL;
+
+	ret = ti_sci_clock_get_state(dev_id, clk_id, &state, NULL);
+	if (ret)
+		return ret;
+
+	*req_state = (state == MSG_CLOCK_SW_STATE_AUTO);
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_is_on() - Is the clock ON
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @req_state: state indicating if the clock is managed by us and enabled
+ * @curr_state: state indicating if the clock is ready for operation
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_is_on(uint32_t dev_id, uint8_t clk_id,
+		       bool *req_state, bool *curr_state)
+{
+	uint8_t c_state = 0, r_state = 0;
+	int ret;
+
+	if (!req_state && !curr_state)
+		return -EINVAL;
+
+	ret = ti_sci_clock_get_state(dev_id, clk_id, &r_state, &c_state);
+	if (ret)
+		return ret;
+
+	if (req_state)
+		*req_state = (r_state == MSG_CLOCK_SW_STATE_REQ);
+	if (curr_state)
+		*curr_state = (c_state == MSG_CLOCK_HW_STATE_READY);
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_is_off() - Is the clock OFF
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @req_state: state indicating if the clock is managed by us and disabled
+ * @curr_state: state indicating if the clock is NOT ready for operation
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_is_off(uint32_t dev_id, uint8_t clk_id,
+			bool *req_state, bool *curr_state)
+{
+	uint8_t c_state = 0, r_state = 0;
+	int ret;
+
+	if (!req_state && !curr_state)
+		return -EINVAL;
+
+	ret = ti_sci_clock_get_state(dev_id, clk_id, &r_state, &c_state);
+	if (ret)
+		return ret;
+
+	if (req_state)
+		*req_state = (r_state == MSG_CLOCK_SW_STATE_UNREQ);
+	if (curr_state)
+		*curr_state = (c_state == MSG_CLOCK_HW_STATE_NOT_READY);
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_set_parent() - Set the clock source of a specific device clock
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @parent_id:	Parent clock identifier to set
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_set_parent(uint32_t dev_id, uint8_t clk_id, uint8_t parent_id)
+{
+	struct ti_sci_msg_req_set_clock_parent req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_SET_CLOCK_PARENT, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.dev_id = dev_id;
+	req.clk_id = clk_id;
+	req.parent_id = parent_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_get_parent() - Get current parent clock source
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @parent_id:	Current clock parent
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_get_parent(uint32_t dev_id, uint8_t clk_id, uint8_t *parent_id)
+{
+	struct ti_sci_msg_req_get_clock_parent req;
+	struct ti_sci_msg_resp_get_clock_parent resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_GET_CLOCK_PARENT, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.dev_id = dev_id;
+	req.clk_id = clk_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	*parent_id = resp.parent_id;
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_get_num_parents() - Get num parents of the current clk source
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @num_parents: Returns he number of parents to the current clock.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_get_num_parents(uint32_t dev_id, uint8_t clk_id,
+				 uint8_t *num_parents)
+{
+	struct ti_sci_msg_req_get_clock_num_parents req;
+	struct ti_sci_msg_resp_get_clock_num_parents resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_GET_NUM_CLOCK_PARENTS, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.dev_id = dev_id;
+	req.clk_id = clk_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	*num_parents = resp.num_parents;
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_get_match_freq() - Find a good match for frequency
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @min_freq:	The minimum allowable frequency in Hz. This is the minimum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @target_freq: The target clock frequency in Hz. A frequency will be
+ *		processed as close to this target frequency as possible.
+ * @max_freq:	The maximum allowable frequency in Hz. This is the maximum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @match_freq:	Frequency match in Hz response.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_get_match_freq(uint32_t dev_id, uint8_t clk_id,
+				uint64_t min_freq, uint64_t target_freq,
+				uint64_t max_freq, uint64_t *match_freq)
+{
+	struct ti_sci_msg_req_query_clock_freq req;
+	struct ti_sci_msg_resp_query_clock_freq resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_QUERY_CLOCK_FREQ, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.dev_id = dev_id;
+	req.clk_id = clk_id;
+	req.min_freq_hz = min_freq;
+	req.target_freq_hz = target_freq;
+	req.max_freq_hz = max_freq;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	*match_freq = resp.freq_hz;
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_set_freq() - Set a frequency for clock
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @min_freq:	The minimum allowable frequency in Hz. This is the minimum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @target_freq: The target clock frequency in Hz. A frequency will be
+ *		processed as close to this target frequency as possible.
+ * @max_freq:	The maximum allowable frequency in Hz. This is the maximum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_set_freq(uint32_t dev_id, uint8_t clk_id, uint64_t min_freq,
+			  uint64_t target_freq, uint64_t max_freq)
+{
+	struct ti_sci_msg_req_set_clock_freq req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_SET_CLOCK_FREQ, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+	req.dev_id = dev_id;
+	req.clk_id = clk_id;
+	req.min_freq_hz = min_freq;
+	req.target_freq_hz = target_freq;
+	req.max_freq_hz = max_freq;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_clock_get_freq() - Get current frequency
+ *
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @freq:	Currently frequency in Hz
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_clock_get_freq(uint32_t dev_id, uint8_t clk_id, uint64_t *freq)
+{
+	struct ti_sci_msg_req_get_clock_freq req;
+	struct ti_sci_msg_resp_get_clock_freq resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_GET_CLOCK_FREQ, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.dev_id = dev_id;
+	req.clk_id = clk_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	*freq = resp.freq_hz;
+
+	return 0;
+}
+
+/**
+ * ti_sci_core_reboot() - Command to request system reset
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_core_reboot(void)
+{
+	struct ti_sci_msg_req_reboot req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TI_SCI_MSG_SYS_RESET, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+	req.domain = TI_SCI_DOMAIN_FULL_SOC_RESET;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_request() - Request a physical processor control
+ *
+ * @proc_id:	Processor ID this request is for
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_request(uint8_t proc_id)
+{
+	struct ti_sci_msg_req_proc_request req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_PROC_REQUEST, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_release() - Release a physical processor control
+ *
+ * @proc_id:	Processor ID this request is for
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_release(uint8_t proc_id)
+{
+	struct ti_sci_msg_req_proc_release req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_PROC_RELEASE, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_handover() - Handover a physical processor control to a host in
+ *                          the processor's access control list.
+ *
+ * @proc_id:	Processor ID this request is for
+ * @host_id:	Host ID to get the control of the processor
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_handover(uint8_t proc_id, uint8_t host_id)
+{
+	struct ti_sci_msg_req_proc_handover req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_PROC_HANDOVER, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+	req.host_id = host_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_set_boot_cfg() - Set the processor boot configuration flags
+ *
+ * @proc_id:		Processor ID this request is for
+ * @config_flags_set:	Configuration flags to be set
+ * @config_flags_clear:	Configuration flags to be cleared
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_set_boot_cfg(uint8_t proc_id, uint64_t bootvector,
+			     uint32_t config_flags_set,
+			     uint32_t config_flags_clear)
+{
+	struct ti_sci_msg_req_set_proc_boot_config req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_SET_PROC_BOOT_CONFIG, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+	req.bootvector_low = bootvector & TISCI_ADDR_LOW_MASK;
+	req.bootvector_high = (bootvector & TISCI_ADDR_HIGH_MASK) >>
+				TISCI_ADDR_HIGH_SHIFT;
+	req.config_flags_set = config_flags_set;
+	req.config_flags_clear = config_flags_clear;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_set_boot_ctrl() - Set the processor boot control flags
+ *
+ * @proc_id:			Processor ID this request is for
+ * @control_flags_set:		Control flags to be set
+ * @control_flags_clear:	Control flags to be cleared
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_set_boot_ctrl(uint8_t proc_id, uint32_t control_flags_set,
+			      uint32_t control_flags_clear)
+{
+	struct ti_sci_msg_req_set_proc_boot_ctrl req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_SET_PROC_BOOT_CTRL, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+	req.control_flags_set = control_flags_set;
+	req.control_flags_clear = control_flags_clear;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_set_boot_ctrl_no_wait() - Set the processor boot control flags
+ *					 without requesting or waiting for a
+ *					 response.
+ *
+ * @proc_id:			Processor ID this request is for
+ * @control_flags_set:		Control flags to be set
+ * @control_flags_clear:	Control flags to be cleared
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_set_boot_ctrl_no_wait(uint8_t proc_id,
+				      uint32_t control_flags_set,
+				      uint32_t control_flags_clear)
+{
+	struct ti_sci_msg_req_set_proc_boot_ctrl req;
+	struct ti_sci_msg_hdr *hdr;
+	struct k3_sec_proxy_msg tx_message;
+	int ret;
+
+	/* Ensure we have sane transfer size */
+	if (sizeof(req) > TI_SCI_MAX_MESSAGE_SIZE)
+		return -ERANGE;
+
+	hdr = (struct ti_sci_msg_hdr *)&req;
+	hdr->seq = ++message_sequence;
+	hdr->type = TISCI_MSG_SET_PROC_BOOT_CTRL;
+	hdr->host = TI_SCI_HOST_ID;
+	/* Setup with NORESPONSE flag to keep response queue clean */
+	hdr->flags = TI_SCI_FLAG_REQ_GENERIC_NORESPONSE;
+
+	req.processor_id = proc_id;
+	req.control_flags_set = control_flags_set;
+	req.control_flags_clear = control_flags_clear;
+
+	tx_message.buf = (uint8_t *)&req;
+	tx_message.len = sizeof(req);
+
+	 /* Send message */
+	ret = k3_sec_proxy_send(SP_HIGH_PRIORITY, &tx_message);
+	if (ret) {
+		ERROR("Message sending failed (%d)\n", ret);
+		return ret;
+	}
+
+	/* Return without waiting for response */
+	return 0;
+}
+
+/**
+ * ti_sci_proc_auth_boot_image() - Authenticate and load image and then set the
+ *                                 processor configuration flags
+ *
+ * @proc_id:	Processor ID this request is for
+ * @cert_addr:	Memory address at which payload image certificate is located
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_auth_boot_image(uint8_t proc_id, uint64_t cert_addr)
+{
+	struct ti_sci_msg_req_proc_auth_boot_image req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_PROC_AUTH_BOOT_IMIAGE, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+	req.cert_addr_low = cert_addr & TISCI_ADDR_LOW_MASK;
+	req.cert_addr_high = (cert_addr & TISCI_ADDR_HIGH_MASK) >>
+				TISCI_ADDR_HIGH_SHIFT;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_get_boot_status() - Get the processor boot status
+ *
+ * @proc_id:	Processor ID this request is for
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_get_boot_status(uint8_t proc_id, uint64_t *bv,
+				uint32_t *cfg_flags,
+				uint32_t *ctrl_flags,
+				uint32_t *sts_flags)
+{
+	struct ti_sci_msg_req_get_proc_boot_status req;
+	struct ti_sci_msg_resp_get_proc_boot_status resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_GET_PROC_BOOT_STATUS, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	*bv = (resp.bootvector_low & TISCI_ADDR_LOW_MASK) |
+	      (((uint64_t)resp.bootvector_high << TISCI_ADDR_HIGH_SHIFT) &
+	       TISCI_ADDR_HIGH_MASK);
+	*cfg_flags = resp.config_flags;
+	*ctrl_flags = resp.control_flags;
+	*sts_flags = resp.status_flags;
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_wait_boot_status() - Wait for a processor boot status
+ *
+ * @proc_id:			Processor ID this request is for
+ * @num_wait_iterations		Total number of iterations we will check before
+ *				we will timeout and give up
+ * @num_match_iterations	How many iterations should we have continued
+ *				status to account for status bits glitching.
+ *				This is to make sure that match occurs for
+ *				consecutive checks. This implies that the
+ *				worst case should consider that the stable
+ *				time should at the worst be num_wait_iterations
+ *				num_match_iterations to prevent timeout.
+ * @delay_per_iteration_us	Specifies how long to wait (in micro seconds)
+ *				between each status checks. This is the minimum
+ *				duration, and overhead of register reads and
+ *				checks are on top of this and can vary based on
+ *				varied conditions.
+ * @delay_before_iterations_us	Specifies how long to wait (in micro seconds)
+ *				before the very first check in the first
+ *				iteration of status check loop. This is the
+ *				minimum duration, and overhead of register
+ *				reads and checks are.
+ * @status_flags_1_set_all_wait	If non-zero, Specifies that all bits of the
+ *				status matching this field requested MUST be 1.
+ * @status_flags_1_set_any_wait	If non-zero, Specifies that at least one of the
+ *				bits matching this field requested MUST be 1.
+ * @status_flags_1_clr_all_wait	If non-zero, Specifies that all bits of the
+ *				status matching this field requested MUST be 0.
+ * @status_flags_1_clr_any_wait	If non-zero, Specifies that at least one of the
+ *				bits matching this field requested MUST be 0.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_wait_boot_status(uint8_t proc_id, uint8_t num_wait_iterations,
+				 uint8_t num_match_iterations,
+				 uint8_t delay_per_iteration_us,
+				 uint8_t delay_before_iterations_us,
+				 uint32_t status_flags_1_set_all_wait,
+				 uint32_t status_flags_1_set_any_wait,
+				 uint32_t status_flags_1_clr_all_wait,
+				 uint32_t status_flags_1_clr_any_wait)
+{
+	struct ti_sci_msg_req_wait_proc_boot_status req;
+	struct ti_sci_msg_hdr resp;
+
+	struct ti_sci_xfer xfer;
+	int ret;
+
+	ret = ti_sci_setup_one_xfer(TISCI_MSG_WAIT_PROC_BOOT_STATUS, 0,
+				    &req, sizeof(req),
+				    &resp, sizeof(resp),
+				    &xfer);
+	if (ret) {
+		ERROR("Message alloc failed (%d)\n", ret);
+		return ret;
+	}
+
+	req.processor_id = proc_id;
+	req.num_wait_iterations = num_wait_iterations;
+	req.num_match_iterations = num_match_iterations;
+	req.delay_per_iteration_us = delay_per_iteration_us;
+	req.delay_before_iterations_us = delay_before_iterations_us;
+	req.status_flags_1_set_all_wait = status_flags_1_set_all_wait;
+	req.status_flags_1_set_any_wait = status_flags_1_set_any_wait;
+	req.status_flags_1_clr_all_wait = status_flags_1_clr_all_wait;
+	req.status_flags_1_clr_any_wait = status_flags_1_clr_any_wait;
+
+	ret = ti_sci_do_xfer(&xfer);
+	if (ret) {
+		ERROR("Transfer send failed (%d)\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+/**
+ * ti_sci_proc_wait_boot_status_no_wait() - Wait for a processor boot status
+ *					    without requesting or waiting for
+ *					    a response.
+ *
+ * @proc_id:			Processor ID this request is for
+ * @num_wait_iterations		Total number of iterations we will check before
+ *				we will timeout and give up
+ * @num_match_iterations	How many iterations should we have continued
+ *				status to account for status bits glitching.
+ *				This is to make sure that match occurs for
+ *				consecutive checks. This implies that the
+ *				worst case should consider that the stable
+ *				time should at the worst be num_wait_iterations
+ *				num_match_iterations to prevent timeout.
+ * @delay_per_iteration_us	Specifies how long to wait (in micro seconds)
+ *				between each status checks. This is the minimum
+ *				duration, and overhead of register reads and
+ *				checks are on top of this and can vary based on
+ *				varied conditions.
+ * @delay_before_iterations_us	Specifies how long to wait (in micro seconds)
+ *				before the very first check in the first
+ *				iteration of status check loop. This is the
+ *				minimum duration, and overhead of register
+ *				reads and checks are.
+ * @status_flags_1_set_all_wait	If non-zero, Specifies that all bits of the
+ *				status matching this field requested MUST be 1.
+ * @status_flags_1_set_any_wait	If non-zero, Specifies that at least one of the
+ *				bits matching this field requested MUST be 1.
+ * @status_flags_1_clr_all_wait	If non-zero, Specifies that all bits of the
+ *				status matching this field requested MUST be 0.
+ * @status_flags_1_clr_any_wait	If non-zero, Specifies that at least one of the
+ *				bits matching this field requested MUST be 0.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_proc_wait_boot_status_no_wait(uint8_t proc_id,
+					 uint8_t num_wait_iterations,
+					 uint8_t num_match_iterations,
+					 uint8_t delay_per_iteration_us,
+					 uint8_t delay_before_iterations_us,
+					 uint32_t status_flags_1_set_all_wait,
+					 uint32_t status_flags_1_set_any_wait,
+					 uint32_t status_flags_1_clr_all_wait,
+					 uint32_t status_flags_1_clr_any_wait)
+{
+	struct ti_sci_msg_req_wait_proc_boot_status req;
+	struct ti_sci_msg_hdr *hdr;
+	struct k3_sec_proxy_msg tx_message;
+	int ret;
+
+	/* Ensure we have sane transfer size */
+	if (sizeof(req) > TI_SCI_MAX_MESSAGE_SIZE)
+		return -ERANGE;
+
+	hdr = (struct ti_sci_msg_hdr *)&req;
+	hdr->seq = ++message_sequence;
+	hdr->type = TISCI_MSG_WAIT_PROC_BOOT_STATUS;
+	hdr->host = TI_SCI_HOST_ID;
+	/* Setup with NORESPONSE flag to keep response queue clean */
+	hdr->flags = TI_SCI_FLAG_REQ_GENERIC_NORESPONSE;
+
+	req.processor_id = proc_id;
+	req.num_wait_iterations = num_wait_iterations;
+	req.num_match_iterations = num_match_iterations;
+	req.delay_per_iteration_us = delay_per_iteration_us;
+	req.delay_before_iterations_us = delay_before_iterations_us;
+	req.status_flags_1_set_all_wait = status_flags_1_set_all_wait;
+	req.status_flags_1_set_any_wait = status_flags_1_set_any_wait;
+	req.status_flags_1_clr_all_wait = status_flags_1_clr_all_wait;
+	req.status_flags_1_clr_any_wait = status_flags_1_clr_any_wait;
+
+	tx_message.buf = (uint8_t *)&req;
+	tx_message.len = sizeof(req);
+
+	 /* Send message */
+	ret = k3_sec_proxy_send(SP_HIGH_PRIORITY, &tx_message);
+	if (ret) {
+		ERROR("Message sending failed (%d)\n", ret);
+		return ret;
+	}
+
+	/* Return without waiting for response */
+	return 0;
+}
+
+/**
+ * ti_sci_enter_sleep - Command to initiate system transition into suspend.
+ *
+ * @proc_id: Processor ID.
+ * @mode: Low power mode to enter.
+ * @core_resume_addr: Address that core should be
+ *		      resumed from after low power transition.
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_enter_sleep(uint8_t proc_id,
+		       uint8_t mode,
+		       uint64_t core_resume_addr)
+{
+	struct ti_sci_msg_req_enter_sleep req;
+	struct ti_sci_msg_hdr *hdr;
+	struct k3_sec_proxy_msg tx_message;
+	int ret;
+
+	/* Ensure we have sane transfer size */
+	if (sizeof(req) > TI_SCI_MAX_MESSAGE_SIZE) {
+		return -ERANGE;
+	}
+
+	hdr = (struct ti_sci_msg_hdr *)&req;
+	hdr->seq = ++message_sequence;
+	hdr->type = TI_SCI_MSG_ENTER_SLEEP;
+	hdr->host = TI_SCI_HOST_ID;
+	/* Setup with NORESPONSE flag to keep response queue clean */
+	hdr->flags = TI_SCI_FLAG_REQ_GENERIC_NORESPONSE;
+
+	req.processor_id = proc_id;
+	req.mode = mode;
+	req.core_resume_lo = core_resume_addr & TISCI_ADDR_LOW_MASK;
+	req.core_resume_hi = (core_resume_addr & TISCI_ADDR_HIGH_MASK) >>
+			     TISCI_ADDR_HIGH_SHIFT;
+
+	tx_message.buf = (uint8_t *)&req;
+	tx_message.len = sizeof(req);
+
+	/* Send message */
+	ret = k3_sec_proxy_send(SP_HIGH_PRIORITY, &tx_message);
+	if (ret != 0) {
+		ERROR("Message sending failed (%d)\n", ret);
+		return ret;
+	}
+
+	/* Return without waiting for response */
+	return 0;
+}
+
+/**
+ * ti_sci_init() - Basic initialization
+ *
+ * Return: 0 if all goes well, else appropriate error message
+ */
+int ti_sci_init(void)
+{
+	struct ti_sci_msg_resp_version rev_info;
+	int ret;
+
+	ret = ti_sci_get_revision(&rev_info);
+	if (ret) {
+		ERROR("Unable to communicate with control firmware (%d)\n", ret);
+		return ret;
+	}
+
+	INFO("SYSFW ABI: %d.%d (firmware rev 0x%04x '%s')\n",
+	     rev_info.abi_major, rev_info.abi_minor,
+	     rev_info.firmware_revision,
+	     rev_info.firmware_description);
+
+	return 0;
+}
diff --git a/plat/ti/k3/common/drivers/ti_sci/ti_sci.h b/plat/ti/k3/common/drivers/ti_sci/ti_sci.h
new file mode 100644
index 0000000..06944a7
--- /dev/null
+++ b/plat/ti/k3/common/drivers/ti_sci/ti_sci.h
@@ -0,0 +1,232 @@
+/*
+ * Texas Instruments System Control Interface API
+ *   Based on Linux and U-Boot implementation
+ *
+ * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef TI_SCI_H
+#define TI_SCI_H
+
+#include <stdint.h>
+#include <stdbool.h>
+
+/**
+ * Device control operations
+ *
+ * - ti_sci_device_get - command to request for device managed by TISCI
+ * - ti_sci_device_get_exclusive - exclusively request a device
+ * - ti_sci_device_idle - Command to idle a device managed by TISCI
+ * - ti_sci_device_idle_exclusive - exclusively idle a device
+ * - ti_sci_device_put - command to release a device managed by TISCI
+ * - ti_sci_device_put_no_wait - release a device without waiting for response
+ * - ti_sci_device_is_valid - Is the device valid
+ * - ti_sci_device_get_clcnt - Get context loss counter
+ *              @count: Pointer to Context Loss counter to populate
+ * - ti_sci_device_is_idle - Check if the device is requested to be idle
+ *              @r_state: true if requested to be idle
+ * - ti_sci_device_is_stop - Check if the device is requested to be stopped
+ *              @r_state: true if requested to be stopped
+ *              @curr_state: true if currently stopped.
+ * - ti_sci_device_is_on - Check if the device is requested to be ON
+ *              @r_state: true if requested to be ON
+ *              @curr_state: true if currently ON and active
+ * - ti_sci_device_is_trans - Check if the device is currently transitioning
+ *              @curr_state: true if currently transitioning.
+ * - ti_sci_device_set_resets - Command to set resets for
+ *                              device managed by TISCI
+ *              @reset_state: Device specific reset bit field
+ * - ti_sci_device_get_resets - Get reset state for device managed by TISCI
+ *              @reset_state: Pointer to reset state to populate
+ *
+ * NOTE: for all these functions, the following are generic in nature:
+ * @id:		Device Identifier
+ * Returns 0 for successful request, else returns corresponding error message.
+ *
+ * Request for the device - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_device with put_device. No refcounting is
+ * managed by driver for that purpose.
+ */
+int ti_sci_device_get(uint32_t id);
+int ti_sci_device_get_exclusive(uint32_t id);
+int ti_sci_device_idle(uint32_t id);
+int ti_sci_device_idle_exclusive(uint32_t id);
+int ti_sci_device_put(uint32_t id);
+int ti_sci_device_put_no_wait(uint32_t id);
+int ti_sci_device_is_valid(uint32_t id);
+int ti_sci_device_get_clcnt(uint32_t id, uint32_t *count);
+int ti_sci_device_is_idle(uint32_t id, bool *r_state);
+int ti_sci_device_is_stop(uint32_t id, bool *r_state,  bool *curr_state);
+int ti_sci_device_is_on(uint32_t id, bool *r_state,  bool *curr_state);
+int ti_sci_device_is_trans(uint32_t id, bool *curr_state);
+int ti_sci_device_set_resets(uint32_t id, uint32_t reset_state);
+int ti_sci_device_get_resets(uint32_t id, uint32_t *reset_state);
+
+/**
+ * Clock control operations
+ *
+ * - ti_sci_clock_get - Get control of a clock from TI SCI
+ *              @needs_ssc: 'true' iff Spread Spectrum clock is desired
+ *              @can_change_freq: 'true' iff frequency change is desired
+ *              @enable_input_term: 'true' iff input termination is desired
+ * - ti_sci_clock_idle - Idle a clock which is in our control
+ * - ti_sci_clock_put - Release a clock from our control
+ * - ti_sci_clock_is_auto - Is the clock being auto managed
+ *              @req_state: state indicating if the clock is auto managed
+ * - ti_sci_clock_is_on - Is the clock ON
+ *              @req_state: state indicating if the clock is managed by us and enabled
+ *              @curr_state: state indicating if the clock is ready for operation
+ * - ti_sci_clock_is_off - Is the clock OFF
+ *              @req_state: state indicating if the clock is managed by us and disabled
+ *              @curr_state: state indicating if the clock is NOT ready for operation
+ * - ti_sci_clock_set_parent - Set the clock source of a specific device clock
+ *              @parent_id: Parent clock identifier to set
+ * - ti_sci_clock_get_parent - Get current parent clock source
+ *              @parent_id: Current clock parent
+ * - ti_sci_clock_get_num_parents - Get num parents of the current clk source
+ *              @num_parents: Returns he number of parents to the current clock.
+ * - ti_sci_clock_get_match_freq - Find a good match for frequency
+ *              @match_freq: Frequency match in Hz response.
+ * - ti_sci_clock_set_freq - Set a frequency for clock
+ * - ti_sci_clock_get_freq - Get current frequency
+ *              @freq: Currently frequency in Hz
+ *
+ * NOTE: for all these functions, the following are generic in nature:
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has its own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @min_freq:	The minimum allowable frequency in Hz. This is the minimum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @target_freq: The target clock frequency in Hz. A frequency will be
+ *		processed as close to this target frequency as possible.
+ * @max_freq:	The maximum allowable frequency in Hz. This is the maximum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * Returns 0 for successful request, else returns corresponding error message.
+ *
+ * Request for the clock - NOTE: the client MUST maintain integrity of
+ * usage count by balancing get_clock with put_clock. No refcounting is
+ * managed by driver for that purpose.
+ */
+int ti_sci_clock_get(uint32_t dev_id, uint8_t clk_id,
+		     bool needs_ssc, bool can_change_freq,
+		     bool enable_input_term);
+int ti_sci_clock_idle(uint32_t dev_id, uint8_t clk_id);
+int ti_sci_clock_put(uint32_t dev_id, uint8_t clk_id);
+int ti_sci_clock_is_auto(uint32_t dev_id, uint8_t clk_id,
+			 bool *req_state);
+int ti_sci_clock_is_on(uint32_t dev_id, uint8_t clk_id,
+		       bool *req_state, bool *curr_state);
+int ti_sci_clock_is_off(uint32_t dev_id, uint8_t clk_id,
+			bool *req_state, bool *curr_state);
+int ti_sci_clock_set_parent(uint32_t dev_id, uint8_t clk_id,
+			    uint8_t parent_id);
+int ti_sci_clock_get_parent(uint32_t dev_id, uint8_t clk_id,
+			    uint8_t *parent_id);
+int ti_sci_clock_get_num_parents(uint32_t dev_id, uint8_t clk_id,
+				 uint8_t *num_parents);
+int ti_sci_clock_get_match_freq(uint32_t dev_id, uint8_t clk_id,
+				uint64_t min_freq, uint64_t target_freq,
+				uint64_t max_freq, uint64_t *match_freq);
+int ti_sci_clock_set_freq(uint32_t dev_id, uint8_t clk_id,
+			  uint64_t min_freq, uint64_t target_freq,
+			  uint64_t max_freq);
+int ti_sci_clock_get_freq(uint32_t dev_id, uint8_t clk_id, uint64_t *freq);
+
+/**
+ * Core control operations
+ *
+ * - ti_sci_core_reboot() - Command to request system reset
+ *
+ * Return: 0 if all went well, else returns appropriate error value.
+ */
+int ti_sci_core_reboot(void);
+
+/**
+ * Processor control operations
+ *
+ * - ti_sci_proc_request - Command to request a physical processor control
+ * - ti_sci_proc_release - Command to release a physical processor control
+ * - ti_sci_proc_handover - Command to handover a physical processor control to
+ *                          a host in the processor's access control list.
+ *              @host_id: Host ID to get the control of the processor
+ * - ti_sci_proc_set_boot_cfg - Command to set the processor boot configuration flags
+ *              @config_flags_set: Configuration flags to be set
+ *              @config_flags_clear: Configuration flags to be cleared.
+ * - ti_sci_proc_set_boot_ctrl - Command to set the processor boot control flags
+ *              @control_flags_set: Control flags to be set
+ *              @control_flags_clear: Control flags to be cleared
+ * - ti_sci_proc_set_boot_ctrl_no_wait - Same as above without waiting for response
+ * - ti_sci_proc_auth_boot_image - Command to authenticate and load the image
+ *                                 and then set the processor configuration flags.
+ *              @cert_addr: Memory address at which payload image certificate is located.
+ * - ti_sci_proc_get_boot_status - Command to get the processor boot status
+ * - ti_sci_proc_wait_boot_status - Command to wait for a processor boot status
+ * - ti_sci_proc_wait_boot_status_no_wait - Same as above without waiting for response
+ *
+ * NOTE: for all these functions, the following are generic in nature:
+ * @proc_id:	Processor ID
+ * Returns 0 for successful request, else returns corresponding error message.
+ */
+int ti_sci_proc_request(uint8_t proc_id);
+int ti_sci_proc_release(uint8_t proc_id);
+int ti_sci_proc_handover(uint8_t proc_id, uint8_t host_id);
+int ti_sci_proc_set_boot_cfg(uint8_t proc_id, uint64_t bootvector,
+			     uint32_t config_flags_set,
+			     uint32_t config_flags_clear);
+int ti_sci_proc_set_boot_ctrl(uint8_t proc_id, uint32_t control_flags_set,
+			      uint32_t control_flags_clear);
+int ti_sci_proc_set_boot_ctrl_no_wait(uint8_t proc_id,
+				      uint32_t control_flags_set,
+				      uint32_t control_flags_clear);
+int ti_sci_proc_auth_boot_image(uint8_t proc_id, uint64_t cert_addr);
+int ti_sci_proc_get_boot_status(uint8_t proc_id, uint64_t *bv,
+				uint32_t *cfg_flags,
+				uint32_t *ctrl_flags,
+				uint32_t *sts_flags);
+int ti_sci_proc_wait_boot_status(uint8_t proc_id, uint8_t num_wait_iterations,
+				 uint8_t num_match_iterations,
+				 uint8_t delay_per_iteration_us,
+				 uint8_t delay_before_iterations_us,
+				 uint32_t status_flags_1_set_all_wait,
+				 uint32_t status_flags_1_set_any_wait,
+				 uint32_t status_flags_1_clr_all_wait,
+				 uint32_t status_flags_1_clr_any_wait);
+int ti_sci_proc_wait_boot_status_no_wait(uint8_t proc_id,
+					 uint8_t num_wait_iterations,
+					 uint8_t num_match_iterations,
+					 uint8_t delay_per_iteration_us,
+					 uint8_t delay_before_iterations_us,
+					 uint32_t status_flags_1_set_all_wait,
+					 uint32_t status_flags_1_set_any_wait,
+					 uint32_t status_flags_1_clr_all_wait,
+					 uint32_t status_flags_1_clr_any_wait);
+
+/**
+ * System Low Power Operations
+ *
+ * - ti_sci_enter_sleep - Command to initiate system transition into suspend.
+ *		@proc_id: Processor ID.
+ *		@mode: Low power mode to enter.
+ *		@core_resume_addr: Address that core should be resumed from
+ *				   after low power transition.
+ *
+ * NOTE: for all these functions, the following are generic in nature:
+ * Returns 0 for successful request, else returns corresponding error message.
+ */
+int ti_sci_enter_sleep(uint8_t proc_id,
+		       uint8_t mode,
+		       uint64_t core_resume_addr);
+
+/**
+ * ti_sci_init() - Basic initialization
+ *
+ * Return: 0 if all goes good, else appropriate error message.
+ */
+int ti_sci_init(void);
+
+#endif /* TI_SCI_H */
diff --git a/plat/ti/k3/common/drivers/ti_sci/ti_sci_protocol.h b/plat/ti/k3/common/drivers/ti_sci/ti_sci_protocol.h
new file mode 100644
index 0000000..d220612
--- /dev/null
+++ b/plat/ti/k3/common/drivers/ti_sci/ti_sci_protocol.h
@@ -0,0 +1,734 @@
+/*
+ * Texas Instruments System Control Interface (TISCI) Protocol
+ *
+ * Communication protocol with TI SCI hardware
+ * The system works in a message response protocol
+ * See: http://processors.wiki.ti.com/index.php/TISCI for details
+ *
+ * Copyright (C) 2018-2022 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef TI_SCI_PROTOCOL_H
+#define TI_SCI_PROTOCOL_H
+
+#include <stdint.h>
+
+/* Generic Messages */
+#define TI_SCI_MSG_ENABLE_WDT		0x0000
+#define TI_SCI_MSG_WAKE_RESET		0x0001
+#define TI_SCI_MSG_VERSION		0x0002
+#define TI_SCI_MSG_WAKE_REASON		0x0003
+#define TI_SCI_MSG_GOODBYE		0x0004
+#define TI_SCI_MSG_SYS_RESET		0x0005
+
+/* Device requests */
+#define TI_SCI_MSG_SET_DEVICE_STATE	0x0200
+#define TI_SCI_MSG_GET_DEVICE_STATE	0x0201
+#define TI_SCI_MSG_SET_DEVICE_RESETS	0x0202
+
+/* Low Power Mode Requests */
+#define TI_SCI_MSG_ENTER_SLEEP		0x0301
+
+/* Clock requests */
+#define TI_SCI_MSG_SET_CLOCK_STATE	0x0100
+#define TI_SCI_MSG_GET_CLOCK_STATE	0x0101
+#define TI_SCI_MSG_SET_CLOCK_PARENT	0x0102
+#define TI_SCI_MSG_GET_CLOCK_PARENT	0x0103
+#define TI_SCI_MSG_GET_NUM_CLOCK_PARENTS 0x0104
+#define TI_SCI_MSG_SET_CLOCK_FREQ	0x010c
+#define TI_SCI_MSG_QUERY_CLOCK_FREQ	0x010d
+#define TI_SCI_MSG_GET_CLOCK_FREQ	0x010e
+
+/* Processor Control Messages */
+#define TISCI_MSG_PROC_REQUEST		0xc000
+#define TISCI_MSG_PROC_RELEASE		0xc001
+#define TISCI_MSG_PROC_HANDOVER		0xc005
+#define TISCI_MSG_SET_PROC_BOOT_CONFIG	0xc100
+#define TISCI_MSG_SET_PROC_BOOT_CTRL	0xc101
+#define TISCI_MSG_PROC_AUTH_BOOT_IMIAGE	0xc120
+#define TISCI_MSG_GET_PROC_BOOT_STATUS	0xc400
+#define TISCI_MSG_WAIT_PROC_BOOT_STATUS	0xc401
+
+/**
+ * struct ti_sci_msg_hdr - Generic Message Header for All messages and responses
+ * @type:	Type of messages: One of TI_SCI_MSG* values
+ * @host:	Host of the message
+ * @seq:	Message identifier indicating a transfer sequence
+ * @flags:	Flag for the message
+ */
+struct ti_sci_msg_hdr {
+	uint16_t type;
+	uint8_t host;
+	uint8_t seq;
+#define TI_SCI_MSG_FLAG(val)			(1 << (val))
+#define TI_SCI_FLAG_REQ_GENERIC_NORESPONSE	0x0
+#define TI_SCI_FLAG_REQ_ACK_ON_RECEIVED		TI_SCI_MSG_FLAG(0)
+#define TI_SCI_FLAG_REQ_ACK_ON_PROCESSED	TI_SCI_MSG_FLAG(1)
+#define TI_SCI_FLAG_RESP_GENERIC_NACK		0x0
+#define TI_SCI_FLAG_RESP_GENERIC_ACK		TI_SCI_MSG_FLAG(1)
+	/* Additional Flags */
+	uint32_t flags;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_version - Response for a message
+ * @hdr:		Generic header
+ * @firmware_description: String describing the firmware
+ * @firmware_revision:	Firmware revision
+ * @abi_major:		Major version of the ABI that firmware supports
+ * @abi_minor:		Minor version of the ABI that firmware supports
+ *
+ * In general, ABI version changes follow the rule that minor version increments
+ * are backward compatible. Major revision changes in ABI may not be
+ * backward compatible.
+ *
+ * Response to a generic message with message type TI_SCI_MSG_VERSION
+ */
+struct ti_sci_msg_resp_version {
+	struct ti_sci_msg_hdr hdr;
+#define FIRMWARE_DESCRIPTION_LENGTH 32
+	char firmware_description[FIRMWARE_DESCRIPTION_LENGTH];
+	uint16_t firmware_revision;
+	uint8_t abi_major;
+	uint8_t abi_minor;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_reboot - Reboot the SoC
+ * @hdr:	Generic Header
+ * @domain:	Domain to be reset, 0 for full SoC reboot
+ *
+ * Request type is TI_SCI_MSG_SYS_RESET, responded with a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_reboot {
+	struct ti_sci_msg_hdr hdr;
+#define TI_SCI_DOMAIN_FULL_SOC_RESET	0x0
+	uint8_t domain;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_device_state - Set the desired state of the device
+ * @hdr:		Generic header
+ * @id:	Indicates which device to modify
+ * @reserved: Reserved space in message, must be 0 for backward compatibility
+ * @state: The desired state of the device.
+ *
+ * Certain flags can also be set to alter the device state:
+ * + MSG_FLAG_DEVICE_WAKE_ENABLED - Configure the device to be a wake source.
+ * The meaning of this flag will vary slightly from device to device and from
+ * SoC to SoC but it generally allows the device to wake the SoC out of deep
+ * suspend states.
+ * + MSG_FLAG_DEVICE_RESET_ISO - Enable reset isolation for this device.
+ * + MSG_FLAG_DEVICE_EXCLUSIVE - Claim this device exclusively. When passed
+ * with STATE_RETENTION or STATE_ON, it will claim the device exclusively.
+ * If another host already has this device set to STATE_RETENTION or STATE_ON,
+ * the message will fail. Once successful, other hosts attempting to set
+ * STATE_RETENTION or STATE_ON will fail.
+ *
+ * Request type is TI_SCI_MSG_SET_DEVICE_STATE, responded with a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_set_device_state {
+	/* Additional hdr->flags options */
+#define MSG_FLAG_DEVICE_WAKE_ENABLED	TI_SCI_MSG_FLAG(8)
+#define MSG_FLAG_DEVICE_RESET_ISO	TI_SCI_MSG_FLAG(9)
+#define MSG_FLAG_DEVICE_EXCLUSIVE	TI_SCI_MSG_FLAG(10)
+	struct ti_sci_msg_hdr hdr;
+	uint32_t id;
+	uint32_t reserved;
+
+#define MSG_DEVICE_SW_STATE_AUTO_OFF	0
+#define MSG_DEVICE_SW_STATE_RETENTION	1
+#define MSG_DEVICE_SW_STATE_ON		2
+	uint8_t state;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_device_state - Request to get device.
+ * @hdr:		Generic header
+ * @id:		Device Identifier
+ *
+ * Request type is TI_SCI_MSG_GET_DEVICE_STATE, responded device state
+ * information
+ */
+struct ti_sci_msg_req_get_device_state {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_device_state - Response to get device request.
+ * @hdr:		Generic header
+ * @context_loss_count: Indicates how many times the device has lost context. A
+ *	driver can use this monotonic counter to determine if the device has
+ *	lost context since the last time this message was exchanged.
+ * @resets: Programmed state of the reset lines.
+ * @programmed_state:	The state as programmed by set_device.
+ *			- Uses the MSG_DEVICE_SW_* macros
+ * @current_state:	The actual state of the hardware.
+ *
+ * Response to request TI_SCI_MSG_GET_DEVICE_STATE.
+ */
+struct ti_sci_msg_resp_get_device_state {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t context_loss_count;
+	uint32_t resets;
+	uint8_t programmed_state;
+#define MSG_DEVICE_HW_STATE_OFF		0
+#define MSG_DEVICE_HW_STATE_ON		1
+#define MSG_DEVICE_HW_STATE_TRANS	2
+	uint8_t current_state;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_device_resets - Set the desired resets
+ *				configuration of the device
+ * @hdr:		Generic header
+ * @id:	Indicates which device to modify
+ * @resets: A bit field of resets for the device. The meaning, behavior,
+ *	and usage of the reset flags are device specific. 0 for a bit
+ *	indicates releasing the reset represented by that bit while 1
+ *	indicates keeping it held.
+ *
+ * Request type is TI_SCI_MSG_SET_DEVICE_RESETS, responded with a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_set_device_resets {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t id;
+	uint32_t resets;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_clock_state - Request to setup a Clock state
+ * @hdr:	Generic Header, Certain flags can be set specific to the clocks:
+ *		MSG_FLAG_CLOCK_ALLOW_SSC: Allow this clock to be modified
+ *		via spread spectrum clocking.
+ *		MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE: Allow this clock's
+ *		frequency to be changed while it is running so long as it
+ *		is within the min/max limits.
+ *		MSG_FLAG_CLOCK_INPUT_TERM: Enable input termination, this
+ *		is only applicable to clock inputs on the SoC pseudo-device.
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @request_state: Request the state for the clock to be set to.
+ *		MSG_CLOCK_SW_STATE_UNREQ: The IP does not require this clock,
+ *		it can be disabled, regardless of the state of the device
+ *		MSG_CLOCK_SW_STATE_AUTO: Allow the System Controller to
+ *		automatically manage the state of this clock. If the device
+ *		is enabled, then the clock is enabled. If the device is set
+ *		to off or retention, then the clock is internally set as not
+ *		being required by the device.(default)
+ *		MSG_CLOCK_SW_STATE_REQ:  Configure the clock to be enabled,
+ *		regardless of the state of the device.
+ *
+ * Normally, all required clocks are managed by TISCI entity, this is used
+ * only for specific control *IF* required. Auto managed state is
+ * MSG_CLOCK_SW_STATE_AUTO, in other states, TISCI entity assume remote
+ * will explicitly control.
+ *
+ * Request type is TI_SCI_MSG_SET_CLOCK_STATE, response is a generic
+ * ACK or NACK message.
+ */
+struct ti_sci_msg_req_set_clock_state {
+	/* Additional hdr->flags options */
+#define MSG_FLAG_CLOCK_ALLOW_SSC		TI_SCI_MSG_FLAG(8)
+#define MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE	TI_SCI_MSG_FLAG(9)
+#define MSG_FLAG_CLOCK_INPUT_TERM		TI_SCI_MSG_FLAG(10)
+	struct ti_sci_msg_hdr hdr;
+	uint32_t dev_id;
+	uint8_t clk_id;
+#define MSG_CLOCK_SW_STATE_UNREQ	0
+#define MSG_CLOCK_SW_STATE_AUTO		1
+#define MSG_CLOCK_SW_STATE_REQ		2
+	uint8_t request_state;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_state - Request for clock state
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to get state of.
+ *
+ * Request type is TI_SCI_MSG_GET_CLOCK_STATE, response is state
+ * of the clock
+ */
+struct ti_sci_msg_req_get_clock_state {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t dev_id;
+	uint8_t clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_state - Response to get clock state
+ * @hdr:	Generic Header
+ * @programmed_state: Any programmed state of the clock. This is one of
+ *		MSG_CLOCK_SW_STATE* values.
+ * @current_state: Current state of the clock. This is one of:
+ *		MSG_CLOCK_HW_STATE_NOT_READY: Clock is not ready
+ *		MSG_CLOCK_HW_STATE_READY: Clock is ready
+ *
+ * Response to TI_SCI_MSG_GET_CLOCK_STATE.
+ */
+struct ti_sci_msg_resp_get_clock_state {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t programmed_state;
+#define MSG_CLOCK_HW_STATE_NOT_READY	0
+#define MSG_CLOCK_HW_STATE_READY	1
+	uint8_t current_state;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_clock_parent - Set the clock parent
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to modify.
+ * @parent_id:	The new clock parent is selectable by an index via this
+ *		parameter.
+ *
+ * Request type is TI_SCI_MSG_SET_CLOCK_PARENT, response is generic
+ * ACK / NACK message.
+ */
+struct ti_sci_msg_req_set_clock_parent {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t dev_id;
+	uint8_t clk_id;
+	uint8_t parent_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_parent - Get the clock parent
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *		Each device has it's own set of clock inputs. This indexes
+ *		which clock input to get the parent for.
+ *
+ * Request type is TI_SCI_MSG_GET_CLOCK_PARENT, response is parent information
+ */
+struct ti_sci_msg_req_get_clock_parent {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t dev_id;
+	uint8_t clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_parent - Response with clock parent
+ * @hdr:	Generic Header
+ * @parent_id:	The current clock parent
+ *
+ * Response to TI_SCI_MSG_GET_CLOCK_PARENT.
+ */
+struct ti_sci_msg_resp_get_clock_parent {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t parent_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_num_parents - Request to get clock parents
+ * @hdr:	Generic header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *
+ * This request provides information about how many clock parent options
+ * are available for a given clock to a device. This is typically used
+ * for input clocks.
+ *
+ * Request type is TI_SCI_MSG_GET_NUM_CLOCK_PARENTS, response is appropriate
+ * message, or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_get_clock_num_parents {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t dev_id;
+	uint8_t clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_num_parents - Response for get clk parents
+ * @hdr:		Generic header
+ * @num_parents:	Number of clock parents
+ *
+ * Response to TI_SCI_MSG_GET_NUM_CLOCK_PARENTS
+ */
+struct ti_sci_msg_resp_get_clock_num_parents {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t num_parents;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_query_clock_freq - Request to query a frequency
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @target_freq_hz: The target clock frequency. A frequency will be found
+ *		as close to this target frequency as possible.
+ * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @clk_id:	Clock identifier for the device for this request.
+ *
+ * NOTE: Normally clock frequency management is automatically done by TISCI
+ * entity. In case of specific requests, TISCI evaluates capability to achieve
+ * requested frequency within provided range and responds with
+ * result message.
+ *
+ * Request type is TI_SCI_MSG_QUERY_CLOCK_FREQ, response is appropriate message,
+ * or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_query_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t dev_id;
+	uint64_t min_freq_hz;
+	uint64_t target_freq_hz;
+	uint64_t max_freq_hz;
+	uint8_t clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_query_clock_freq - Response to a clock frequency query
+ * @hdr:	Generic Header
+ * @freq_hz:	Frequency that is the best match in Hz.
+ *
+ * Response to request type TI_SCI_MSG_QUERY_CLOCK_FREQ. NOTE: if the request
+ * cannot be satisfied, the message will be of type NACK.
+ */
+struct ti_sci_msg_resp_query_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	uint64_t freq_hz;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_set_clock_freq - Request to setup a clock frequency
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @min_freq_hz: The minimum allowable frequency in Hz. This is the minimum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @target_freq_hz: The target clock frequency. The clock will be programmed
+ *		at a rate as close to this target frequency as possible.
+ * @max_freq_hz: The maximum allowable frequency in Hz. This is the maximum
+ *		allowable programmed frequency and does not account for clock
+ *		tolerances and jitter.
+ * @clk_id:	Clock identifier for the device for this request.
+ *
+ * NOTE: Normally clock frequency management is automatically done by TISCI
+ * entity. In case of specific requests, TISCI evaluates capability to achieve
+ * requested range and responds with success/failure message.
+ *
+ * This sets the desired frequency for a clock within an allowable
+ * range. This message will fail on an enabled clock unless
+ * MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE is set for the clock. Additionally,
+ * if other clocks have their frequency modified due to this message,
+ * they also must have the MSG_FLAG_CLOCK_ALLOW_FREQ_CHANGE or be disabled.
+ *
+ * Calling set frequency on a clock input to the SoC pseudo-device will
+ * inform the PMMC of that clock's frequency. Setting a frequency of
+ * zero will indicate the clock is disabled.
+ *
+ * Calling set frequency on clock outputs from the SoC pseudo-device will
+ * function similarly to setting the clock frequency on a device.
+ *
+ * Request type is TI_SCI_MSG_SET_CLOCK_FREQ, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_set_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t dev_id;
+	uint64_t min_freq_hz;
+	uint64_t target_freq_hz;
+	uint64_t max_freq_hz;
+	uint8_t clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_clock_freq - Request to get the clock frequency
+ * @hdr:	Generic Header
+ * @dev_id:	Device identifier this request is for
+ * @clk_id:	Clock identifier for the device for this request.
+ *
+ * NOTE: Normally clock frequency management is automatically done by TISCI
+ * entity. In some cases, clock frequencies are configured by host.
+ *
+ * Request type is TI_SCI_MSG_GET_CLOCK_FREQ, responded with clock frequency
+ * that the clock is currently at.
+ */
+struct ti_sci_msg_req_get_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	uint32_t dev_id;
+	uint8_t clk_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_resp_get_clock_freq - Response of clock frequency request
+ * @hdr:	Generic Header
+ * @freq_hz:	Frequency that the clock is currently on, in Hz.
+ *
+ * Response to request type TI_SCI_MSG_GET_CLOCK_FREQ.
+ */
+struct ti_sci_msg_resp_get_clock_freq {
+	struct ti_sci_msg_hdr hdr;
+	uint64_t freq_hz;
+} __packed;
+
+#define TISCI_ADDR_LOW_MASK		0x00000000ffffffff
+#define TISCI_ADDR_HIGH_MASK		0xffffffff00000000
+#define TISCI_ADDR_HIGH_SHIFT		32
+
+/**
+ * struct ti_sci_msg_req_proc_request - Request a processor
+ *
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor
+ *
+ * Request type is TISCI_MSG_PROC_REQUEST, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_request {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_release - Release a processor
+ *
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor
+ *
+ * Request type is TISCI_MSG_PROC_RELEASE, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_release {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_handover - Handover a processor to a host
+ *
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor
+ * @host_id:		New Host we want to give control to
+ *
+ * Request type is TISCI_MSG_PROC_HANDOVER, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_proc_handover {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+	uint8_t host_id;
+} __packed;
+
+/* A53 Config Flags */
+#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_EN         0x00000001
+#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_NIDEN      0x00000002
+#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_SPIDEN     0x00000004
+#define PROC_BOOT_CFG_FLAG_ARMV8_DBG_SPNIDEN    0x00000008
+#define PROC_BOOT_CFG_FLAG_ARMV8_AARCH32        0x00000100
+
+/* R5 Config Flags */
+#define PROC_BOOT_CFG_FLAG_R5_DBG_EN            0x00000001
+#define PROC_BOOT_CFG_FLAG_R5_DBG_NIDEN         0x00000002
+#define PROC_BOOT_CFG_FLAG_R5_LOCKSTEP          0x00000100
+#define PROC_BOOT_CFG_FLAG_R5_TEINIT            0x00000200
+#define PROC_BOOT_CFG_FLAG_R5_NMFI_EN           0x00000400
+#define PROC_BOOT_CFG_FLAG_R5_TCM_RSTBASE       0x00000800
+#define PROC_BOOT_CFG_FLAG_R5_BTCM_EN           0x00001000
+#define PROC_BOOT_CFG_FLAG_R5_ATCM_EN           0x00002000
+
+/**
+ * struct ti_sci_msg_req_set_proc_boot_config - Set Processor boot configuration
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor
+ * @bootvector_low:	Lower 32bit (Little Endian) of boot vector
+ * @bootvector_high:	Higher 32bit (Little Endian) of boot vector
+ * @config_flags_set:	Optional Processor specific Config Flags to set.
+ *			Setting a bit here implies required bit sets to 1.
+ * @config_flags_clear:	Optional Processor specific Config Flags to clear.
+ *			Setting a bit here implies required bit gets cleared.
+ *
+ * Request type is TISCI_MSG_SET_PROC_BOOT_CONFIG, response is a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_set_proc_boot_config {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+	uint32_t bootvector_low;
+	uint32_t bootvector_high;
+	uint32_t config_flags_set;
+	uint32_t config_flags_clear;
+} __packed;
+
+/* ARMV8 Control Flags */
+#define PROC_BOOT_CTRL_FLAG_ARMV8_ACINACTM      0x00000001
+#define PROC_BOOT_CTRL_FLAG_ARMV8_AINACTS       0x00000002
+#define PROC_BOOT_CTRL_FLAG_ARMV8_L2FLUSHREQ    0x00000100
+
+/* R5 Control Flags */
+#define PROC_BOOT_CTRL_FLAG_R5_CORE_HALT        0x00000001
+
+/**
+ * struct ti_sci_msg_req_set_proc_boot_ctrl - Set Processor boot control flags
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor
+ * @config_flags_set:	Optional Processor specific Config Flags to set.
+ *			Setting a bit here implies required bit sets to 1.
+ * @config_flags_clear:	Optional Processor specific Config Flags to clear.
+ *			Setting a bit here implies required bit gets cleared.
+ *
+ * Request type is TISCI_MSG_SET_PROC_BOOT_CTRL, response is a generic ACK/NACK
+ * message.
+ */
+struct ti_sci_msg_req_set_proc_boot_ctrl {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+	uint32_t control_flags_set;
+	uint32_t control_flags_clear;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_proc_auth_start_image - Authenticate and start image
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor
+ * @cert_addr_low:	Lower 32bit (Little Endian) of certificate
+ * @cert_addr_high:	Higher 32bit (Little Endian) of certificate
+ *
+ * Request type is TISCI_MSG_PROC_AUTH_BOOT_IMAGE, response is a generic
+ * ACK/NACK message.
+ */
+struct ti_sci_msg_req_proc_auth_boot_image {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+	uint32_t cert_addr_low;
+	uint32_t cert_addr_high;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_get_proc_boot_status - Get processor boot status
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor
+ *
+ * Request type is TISCI_MSG_GET_PROC_BOOT_STATUS, response is appropriate
+ * message, or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_get_proc_boot_status {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+} __packed;
+
+/* ARMv8 Status Flags */
+#define PROC_BOOT_STATUS_FLAG_ARMV8_WFE			0x00000001
+#define PROC_BOOT_STATUS_FLAG_ARMV8_WFI			0x00000002
+#define PROC_BOOT_STATUS_FLAG_ARMV8_L2F_DONE		0x00000010
+#define PROC_BOOT_STATUS_FLAG_ARMV8_STANDBYWFIL2	0x00000020
+
+/* R5 Status Flags */
+#define PROC_BOOT_STATUS_FLAG_R5_WFE			0x00000001
+#define PROC_BOOT_STATUS_FLAG_R5_WFI			0x00000002
+#define PROC_BOOT_STATUS_FLAG_R5_CLK_GATED		0x00000004
+#define PROC_BOOT_STATUS_FLAG_R5_LOCKSTEP_PERMITTED	0x00000100
+
+/**
+ * \brief Processor Status Response
+ * struct ti_sci_msg_resp_get_proc_boot_status - Processor boot status response
+ * @hdr:		Generic Header
+ * @processor_id:	ID of processor
+ * @bootvector_low:	Lower 32bit (Little Endian) of boot vector
+ * @bootvector_high:	Higher 32bit (Little Endian) of boot vector
+ * @config_flags:	Optional Processor specific Config Flags set.
+ * @control_flags:	Optional Processor specific Control Flags.
+ * @status_flags:	Optional Processor specific Status Flags set.
+ *
+ * Response to TISCI_MSG_GET_PROC_BOOT_STATUS.
+ */
+struct ti_sci_msg_resp_get_proc_boot_status {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+	uint32_t bootvector_low;
+	uint32_t bootvector_high;
+	uint32_t config_flags;
+	uint32_t control_flags;
+	uint32_t status_flags;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_wait_proc_boot_status - Wait for a processor boot status
+ * @hdr:			Generic Header
+ * @processor_id:		ID of processor
+ * @num_wait_iterations		Total number of iterations we will check before
+ *				we will timeout and give up
+ * @num_match_iterations	How many iterations should we have continued
+ *				status to account for status bits glitching.
+ *				This is to make sure that match occurs for
+ *				consecutive checks. This implies that the
+ *				worst case should consider that the stable
+ *				time should at the worst be num_wait_iterations
+ *				num_match_iterations to prevent timeout.
+ * @delay_per_iteration_us	Specifies how long to wait (in micro seconds)
+ *				between each status checks. This is the minimum
+ *				duration, and overhead of register reads and
+ *				checks are on top of this and can vary based on
+ *				varied conditions.
+ * @delay_before_iterations_us	Specifies how long to wait (in micro seconds)
+ *				before the very first check in the first
+ *				iteration of status check loop. This is the
+ *				minimum duration, and overhead of register
+ *				reads and checks are.
+ * @status_flags_1_set_all_wait	If non-zero, Specifies that all bits of the
+ *				status matching this field requested MUST be 1.
+ * @status_flags_1_set_any_wait	If non-zero, Specifies that at least one of the
+ *				bits matching this field requested MUST be 1.
+ * @status_flags_1_clr_all_wait	If non-zero, Specifies that all bits of the
+ *				status matching this field requested MUST be 0.
+ * @status_flags_1_clr_any_wait	If non-zero, Specifies that at least one of the
+ *				bits matching this field requested MUST be 0.
+ *
+ * Request type is TISCI_MSG_WAIT_PROC_BOOT_STATUS, response is appropriate
+ * message, or NACK in case of inability to satisfy request.
+ */
+struct ti_sci_msg_req_wait_proc_boot_status {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t processor_id;
+	uint8_t num_wait_iterations;
+	uint8_t num_match_iterations;
+	uint8_t delay_per_iteration_us;
+	uint8_t delay_before_iterations_us;
+	uint32_t status_flags_1_set_all_wait;
+	uint32_t status_flags_1_set_any_wait;
+	uint32_t status_flags_1_clr_all_wait;
+	uint32_t status_flags_1_clr_any_wait;
+} __packed;
+
+/**
+ * struct ti_sci_msg_req_enter_sleep - Request for TI_SCI_MSG_ENTER_SLEEP.
+ *
+ * @hdr		    Generic Header
+ * @mode	    Low power mode to enter.
+ * @proc_id	    Processor id to be restored.
+ * @core_resume_lo  Low 32-bits of physical pointer to address for core
+ *		    to begin execution upon resume.
+ * @core_resume_hi  High 32-bits of physical pointer to address for core
+ *		    to begin execution upon resume.
+ *
+ * This message is to be sent after TI_SCI_MSG_PREPARE_SLEEP is sent from OS
+ * and is what actually triggers entry into the specified low power mode.
+ */
+struct ti_sci_msg_req_enter_sleep {
+	struct ti_sci_msg_hdr hdr;
+	uint8_t mode;
+	uint8_t processor_id;
+	uint32_t core_resume_lo;
+	uint32_t core_resume_hi;
+} __packed;
+
+#endif /* TI_SCI_PROTOCOL_H */