diff options
Diffstat (limited to 'debian/rules')
| -rwxr-xr-x | debian/rules | 65 |
1 files changed, 65 insertions, 0 deletions
diff --git a/debian/rules b/debian/rules new file mode 100755 index 0000000..10bafab --- /dev/null +++ b/debian/rules @@ -0,0 +1,65 @@ +#!/usr/bin/make -f + +include /usr/share/dpkg/architecture.mk +include /usr/share/dpkg/buildtools.mk + +export DH_VERBOSE=1 +export TF_CFLAGS += -ffile-prefix-map=$(CURDIR)=. +export DEB_BUILD_MAINT_OPTIONS=hardening=+all + +# Enable verbose build by default, disable when terse is specified. +ifneq (,$(filter terse,$(DEB_BUILD_OPTIONS))) +VERBOSE=0 +else +VERBOSE=1 +endif + +platforms := g12a gxbb sun50i_h6 rk3328 rk3399 rpi3 rpi4 imx8mn +platforms_nodebug := sun50i_a64 imx8mq + +# By default, iMX8MN uses UART2 console. However, other boards supported +# upstream (e.g. Variscite VAR-SOM-MX8M-NANO board) uses UART4. +# Add two subplatforms for imx8mn platform: +# * imx8mn: default configuration +# * imx8mn_uart4: console set to UART4 +imx8mn_subplatforms := imx8mn imx8mn_uart4 +imx8mn_uart4_assigns := IMX_BOOT_UART_BASE=0x30a60000 + +# Always set CROSS_COMPILE, which also works for native builds. +define build_platform + $(eval platform := $(1)) + $(eval debug := $(2)) + $(eval buildtype := $(3)) + $(eval subplatforms := $(if $($(platform)_subplatforms), $($(platform)_subplatforms), $(platform))) + $(eval target := $(if $(filter rk3328 rk3399,$(platform)),bl31/bl31.elf,bl31.bin)) + $(foreach subplatform, $(subplatforms), \ + CROSS_COMPILE=aarch64-linux-gnu- CFLAGS=--param=min-pagesize=0 LDFLAGS= TF_LDFLAGS=--no-warn-rwx-segments dh_auto_build -- V=$(VERBOSE) DEBUG=$(debug) $($(subplatform)_assigns) PLAT=$(platform) bl31 ; \ + install -m644 build/$(platform)/$(buildtype)/$(target) -Dt build/renamed/$(subplatform) ; \ + # For each subplatform, make is called using the same PLAT variable. If + # the build is not cleaned between each call, objects will remain the + # same, without rebuilding them. + make DEBUG=$(debug) PLAT=$(platform) clean ; \ + ) +endef + +%: + dh $@ + +override_dh_auto_build: +# Disable building of arm-trusted-firmware-tools +ifeq ($(filter pkg.arm-trusted-firmware.notools,$(DEB_BUILD_PROFILES)),) + dh_auto_build --sourcedir=tools/fiptool -- DEBUG=1 V=$(VERBOSE) HOSTCC=$(CC) HOSTCCFLAGS="$(CFLAGS) $(CPPFLAGS)" + dh_auto_build --sourcedir=tools/cert_create -- DEBUG=1 V=$(VERBOSE) HOSTCC=$(CC) HOSTCCFLAGS="$(CFLAGS) $(CPPFLAGS) -std=c99 -DUSE_TBBR_DEFS=1" +endif +# Only build firmware on arm64. +ifeq ($(DEB_HOST_ARCH),arm64) + override_dh_auto_build: $(platforms) $(platforms_nodebug) + $(platforms): + $(call build_platform,$@,1,debug) + $(platforms_nodebug): + $(call build_platform,$@,0,release) +endif + +override_dh_installchangelogs: + dh_installchangelogs -parm-trusted-firmware docs/change-log.md + dh_installchangelogs -parm-trusted-firmware-tools |