diff options
Diffstat (limited to 'drivers/marvell/mochi/apn806_setup.c')
| -rw-r--r-- | drivers/marvell/mochi/apn806_setup.c | 297 |
1 files changed, 297 insertions, 0 deletions
diff --git a/drivers/marvell/mochi/apn806_setup.c b/drivers/marvell/mochi/apn806_setup.c new file mode 100644 index 0000000..5c71fed --- /dev/null +++ b/drivers/marvell/mochi/apn806_setup.c @@ -0,0 +1,297 @@ +/* + * Copyright (C) 2018 Marvell International Ltd. + * + * SPDX-License-Identifier: BSD-3-Clause + * https://spdx.org/licenses + */ + +/* AP806 Marvell SoC driver */ + +#include <common/debug.h> +#include <drivers/marvell/ccu.h> +#include <drivers/marvell/cache_llc.h> +#include <drivers/marvell/io_win.h> +#include <drivers/marvell/mci.h> +#include <drivers/marvell/mochi/ap_setup.h> +#include <lib/mmio.h> + +#include <a8k_plat_def.h> + +#define SMMU_sACR (MVEBU_SMMU_BASE + 0x10) +#define SMMU_sACR_PG_64K (1 << 16) + +#define CCU_GSPMU_CR (MVEBU_CCU_BASE(MVEBU_AP0) + \ + 0x3F0) +#define GSPMU_CPU_CONTROL (0x1 << 0) + +#define CCU_HTC_CR (MVEBU_CCU_BASE(MVEBU_AP0) + \ + 0x200) +#define CCU_SET_POC_OFFSET 5 + +#define DSS_CR0 (MVEBU_RFU_BASE + 0x100) +#define DVM_48BIT_VA_ENABLE (1 << 21) + +/* Secure MoChi incoming access */ +#define SEC_MOCHI_IN_ACC_REG (MVEBU_RFU_BASE + 0x4738) +#define SEC_MOCHI_IN_ACC_IHB0_EN (1) +#define SEC_MOCHI_IN_ACC_IHB1_EN (1 << 3) +#define SEC_MOCHI_IN_ACC_IHB2_EN (1 << 6) +#define SEC_MOCHI_IN_ACC_PIDI_EN (1 << 9) +#define SEC_IN_ACCESS_ENA_ALL_MASTERS (SEC_MOCHI_IN_ACC_IHB0_EN | \ + SEC_MOCHI_IN_ACC_IHB1_EN | \ + SEC_MOCHI_IN_ACC_IHB2_EN | \ + SEC_MOCHI_IN_ACC_PIDI_EN) +#define MOCHI_IN_ACC_LEVEL_FORCE_NONSEC (0) +#define MOCHI_IN_ACC_LEVEL_FORCE_SEC (1) +#define MOCHI_IN_ACC_LEVEL_LEAVE_ORIG (2) +#define MOCHI_IN_ACC_LEVEL_MASK_ALL (3) +#define SEC_MOCHI_IN_ACC_IHB0_LEVEL(l) ((l) << 1) +#define SEC_MOCHI_IN_ACC_IHB1_LEVEL(l) ((l) << 4) +#define SEC_MOCHI_IN_ACC_PIDI_LEVEL(l) ((l) << 10) + + +/* SYSRST_OUTn Config definitions */ +#define MVEBU_SYSRST_OUT_CONFIG_REG (MVEBU_MISC_SOC_BASE + 0x4) +#define WD_MASK_SYS_RST_OUT (1 << 2) + +/* Generic Timer System Controller */ +#define MVEBU_MSS_GTCR_REG (MVEBU_REGS_BASE + 0x581000) +#define MVEBU_MSS_GTCR_ENABLE_BIT 0x1 + +/* + * AXI Configuration. + */ + +/* Used for Units of AP-806 (e.g. SDIO and etc) */ +#define MVEBU_AXI_ATTR_BASE (MVEBU_REGS_BASE + 0x6F4580) +#define MVEBU_AXI_ATTR_REG(index) (MVEBU_AXI_ATTR_BASE + \ + 0x4 * index) + +#define XOR_STREAM_ID_REG(ch) (MVEBU_REGS_BASE + 0x410010 + (ch) * 0x20000) +#define XOR_STREAM_ID_MASK 0xFFFF +#define SDIO_STREAM_ID_REG (MVEBU_RFU_BASE + 0x4600) +#define SDIO_STREAM_ID_MASK 0xFF + +/* Do not use the default Stream ID 0 */ +#define A806_STREAM_ID_BASE (0x1) + +static uintptr_t stream_id_reg[] = { + XOR_STREAM_ID_REG(0), + XOR_STREAM_ID_REG(1), + XOR_STREAM_ID_REG(2), + XOR_STREAM_ID_REG(3), + SDIO_STREAM_ID_REG, + 0 +}; + +enum axi_attr { + AXI_SDIO_ATTR = 0, + AXI_DFX_ATTR, + AXI_MAX_ATTR, +}; + +static void apn_sec_masters_access_en(uint32_t enable) +{ + /* Open/Close incoming access for all masters. + * The access is disabled in trusted boot mode + * Could only be done in EL3 + */ + if (enable != 0) { + mmio_clrsetbits_32(SEC_MOCHI_IN_ACC_REG, 0x0U, /* no clear */ + SEC_IN_ACCESS_ENA_ALL_MASTERS); +#if LLC_SRAM + /* Do not change access security level + * for PIDI masters + */ + mmio_clrsetbits_32(SEC_MOCHI_IN_ACC_REG, + SEC_MOCHI_IN_ACC_PIDI_LEVEL( + MOCHI_IN_ACC_LEVEL_MASK_ALL), + SEC_MOCHI_IN_ACC_PIDI_LEVEL( + MOCHI_IN_ACC_LEVEL_LEAVE_ORIG)); +#endif + } else { + mmio_clrsetbits_32(SEC_MOCHI_IN_ACC_REG, + SEC_IN_ACCESS_ENA_ALL_MASTERS, + 0x0U /* no set */); +#if LLC_SRAM + /* Return PIDI access level to the default */ + mmio_clrsetbits_32(SEC_MOCHI_IN_ACC_REG, + SEC_MOCHI_IN_ACC_PIDI_LEVEL( + MOCHI_IN_ACC_LEVEL_MASK_ALL), + SEC_MOCHI_IN_ACC_PIDI_LEVEL( + MOCHI_IN_ACC_LEVEL_FORCE_NONSEC)); +#endif + } +} + +static void setup_smmu(void) +{ + uint32_t reg; + + /* Set the SMMU page size to 64 KB */ + reg = mmio_read_32(SMMU_sACR); + reg |= SMMU_sACR_PG_64K; + mmio_write_32(SMMU_sACR, reg); +} + +static void init_aurora2(void) +{ + uint32_t reg; + + /* Enable GSPMU control by CPU */ + reg = mmio_read_32(CCU_GSPMU_CR); + reg |= GSPMU_CPU_CONTROL; + mmio_write_32(CCU_GSPMU_CR, reg); + +#if LLC_ENABLE + /* Enable LLC for AP806 in exclusive mode */ + llc_enable(0, 1); + + /* Set point of coherency to DDR. + * This is required by units which have + * SW cache coherency + */ + reg = mmio_read_32(CCU_HTC_CR); + reg |= (0x1 << CCU_SET_POC_OFFSET); + mmio_write_32(CCU_HTC_CR, reg); +#endif /* LLC_ENABLE */ + + errata_wa_init(); +} + + +/* MCIx indirect access register are based by default at 0xf4000000/0xf6000000 + * to avoid conflict of internal registers of units connected via MCIx, which + * can be based on the same address (i.e CP1 base is also 0xf4000000), + * the following routines remaps the MCIx indirect bases to another domain + */ +static void mci_remap_indirect_access_base(void) +{ + uint32_t mci; + + for (mci = 0; mci < MCI_MAX_UNIT_ID; mci++) + mmio_write_32(MCIX4_REG_START_ADDRESS_REG(mci), + MVEBU_MCI_REG_BASE_REMAP(mci) >> + MCI_REMAP_OFF_SHIFT); +} + +/* Set a unique stream id for all DMA capable devices */ +static void ap806_stream_id_init(void) +{ + int i; + + for (i = 0; stream_id_reg[i] != 0; i++) { + uint32_t mask = stream_id_reg[i] == SDIO_STREAM_ID_REG ? + SDIO_STREAM_ID_MASK : XOR_STREAM_ID_MASK; + + mmio_clrsetbits_32(stream_id_reg[i], mask, + i + A806_STREAM_ID_BASE); + } +} + +static void apn806_axi_attr_init(void) +{ + uint32_t index, data; + + /* Initialize AXI attributes for APN806 */ + + /* Go over the AXI attributes and set Ax-Cache and Ax-Domain */ + for (index = 0; index < AXI_MAX_ATTR; index++) { + switch (index) { + /* DFX works with no coherent only - + * there's no option to configure the Ax-Cache and Ax-Domain + */ + case AXI_DFX_ATTR: + continue; + default: + /* Set Ax-Cache as cacheable, no allocate, modifiable, + * bufferable + * The values are different because Read & Write + * definition is different in Ax-Cache + */ + data = mmio_read_32(MVEBU_AXI_ATTR_REG(index)); + data &= ~MVEBU_AXI_ATTR_ARCACHE_MASK; + data |= (CACHE_ATTR_WRITE_ALLOC | + CACHE_ATTR_CACHEABLE | + CACHE_ATTR_BUFFERABLE) << + MVEBU_AXI_ATTR_ARCACHE_OFFSET; + data &= ~MVEBU_AXI_ATTR_AWCACHE_MASK; + data |= (CACHE_ATTR_READ_ALLOC | + CACHE_ATTR_CACHEABLE | + CACHE_ATTR_BUFFERABLE) << + MVEBU_AXI_ATTR_AWCACHE_OFFSET; + /* Set Ax-Domain as Outer domain */ + data &= ~MVEBU_AXI_ATTR_ARDOMAIN_MASK; + data |= DOMAIN_OUTER_SHAREABLE << + MVEBU_AXI_ATTR_ARDOMAIN_OFFSET; + data &= ~MVEBU_AXI_ATTR_AWDOMAIN_MASK; + data |= DOMAIN_OUTER_SHAREABLE << + MVEBU_AXI_ATTR_AWDOMAIN_OFFSET; + mmio_write_32(MVEBU_AXI_ATTR_REG(index), data); + } + } +} + +static void dss_setup(void) +{ + /* Enable 48-bit VA */ + mmio_setbits_32(DSS_CR0, DVM_48BIT_VA_ENABLE); +} + +void misc_soc_configurations(void) +{ + uint32_t reg; + + /* Un-mask Watchdog reset from influencing the SYSRST_OUTn. + * Otherwise, upon WD timeout, the WD reset signal won't trigger reset + */ + reg = mmio_read_32(MVEBU_SYSRST_OUT_CONFIG_REG); + reg &= ~(WD_MASK_SYS_RST_OUT); + mmio_write_32(MVEBU_SYSRST_OUT_CONFIG_REG, reg); +} + +void ap_init(void) +{ + /* Setup Aurora2. */ + init_aurora2(); + + /* configure MCI mapping */ + mci_remap_indirect_access_base(); + + /* configure IO_WIN windows */ + init_io_win(MVEBU_AP0); + + /* configure CCU windows */ + init_ccu(MVEBU_AP0); + + /* configure DSS */ + dss_setup(); + + /* Set the stream IDs for DMA masters */ + ap806_stream_id_init(); + + /* configure the SMMU */ + setup_smmu(); + + /* Open APN incoming access for all masters */ + apn_sec_masters_access_en(1); + + /* configure axi for APN*/ + apn806_axi_attr_init(); + + /* misc configuration of the SoC */ + misc_soc_configurations(); +} + +void ap_ble_init(void) +{ +} + +int ap_get_count(void) +{ + return 1; +} + +void update_cp110_default_win(int cp_id) +{ +} |