summaryrefslogtreecommitdiffstats
path: root/include/drivers/arm/css/css_scpi.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/drivers/arm/css/css_scpi.h')
-rw-r--r--include/drivers/arm/css/css_scpi.h109
1 files changed, 109 insertions, 0 deletions
diff --git a/include/drivers/arm/css/css_scpi.h b/include/drivers/arm/css/css_scpi.h
new file mode 100644
index 0000000..68fc60a
--- /dev/null
+++ b/include/drivers/arm/css/css_scpi.h
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2014-2017, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef CSS_SCPI_H
+#define CSS_SCPI_H
+
+#include <stddef.h>
+#include <stdint.h>
+
+/*
+ * An SCPI command consists of a header and a payload.
+ * The following structure describes the header. It is 64-bit long.
+ */
+typedef struct {
+ /* Command ID */
+ uint32_t id : 7;
+ /* Set ID. Identifies whether this is a standard or extended command. */
+ uint32_t set : 1;
+ /* Sender ID to match a reply. The value is sender specific. */
+ uint32_t sender : 8;
+ /* Size of the payload in bytes (0 - 511) */
+ uint32_t size : 9;
+ uint32_t reserved : 7;
+ /*
+ * Status indicating the success of a command.
+ * See the enum below.
+ */
+ uint32_t status;
+} scpi_cmd_t;
+
+typedef enum {
+ SCPI_SET_NORMAL = 0, /* Normal SCPI commands */
+ SCPI_SET_EXTENDED /* Extended SCPI commands */
+} scpi_set_t;
+
+enum {
+ SCP_OK = 0, /* Success */
+ SCP_E_PARAM, /* Invalid parameter(s) */
+ SCP_E_ALIGN, /* Invalid alignment */
+ SCP_E_SIZE, /* Invalid size */
+ SCP_E_HANDLER, /* Invalid handler or callback */
+ SCP_E_ACCESS, /* Invalid access or permission denied */
+ SCP_E_RANGE, /* Value out of range */
+ SCP_E_TIMEOUT, /* Time out has ocurred */
+ SCP_E_NOMEM, /* Invalid memory area or pointer */
+ SCP_E_PWRSTATE, /* Invalid power state */
+ SCP_E_SUPPORT, /* Feature not supported or disabled */
+ SCPI_E_DEVICE, /* Device error */
+ SCPI_E_BUSY, /* Device is busy */
+};
+
+typedef uint32_t scpi_status_t;
+
+typedef enum {
+ SCPI_CMD_SCP_READY = 0x01,
+ SCPI_CMD_SET_CSS_POWER_STATE = 0x03,
+ SCPI_CMD_GET_CSS_POWER_STATE = 0x04,
+ SCPI_CMD_SYS_POWER_STATE = 0x05
+} scpi_command_t;
+
+/*
+ * Macros to parse SCP response to GET_CSS_POWER_STATE command
+ *
+ * [3:0] : cluster ID
+ * [7:4] : cluster state: 0 = on; 3 = off; rest are reserved
+ * [15:8]: on/off state for individual CPUs in the cluster
+ *
+ * Payload is in little-endian
+ */
+#define CLUSTER_ID(_resp) ((_resp) & 0xf)
+#define CLUSTER_POWER_STATE(_resp) (((_resp) >> 4) & 0xf)
+
+/* Result is a bit mask of CPU on/off states in the cluster */
+#define CPU_POWER_STATE(_resp) (((_resp) >> 8) & 0xff)
+
+/*
+ * For GET_CSS_POWER_STATE, SCP returns the power states of every cluster. The
+ * size of response depends on the number of clusters in the system. The
+ * SCP-to-AP payload contains 2 bytes per cluster. Make sure the response is
+ * large enough to contain power states of a given cluster
+ */
+#define CHECK_RESPONSE(_resp, _clus) \
+ (_resp.size >= (((_clus) + 1) * 2))
+
+typedef enum {
+ scpi_power_on = 0,
+ scpi_power_retention = 1,
+ scpi_power_off = 3,
+} scpi_power_state_t;
+
+typedef enum {
+ scpi_system_shutdown = 0,
+ scpi_system_reboot = 1,
+ scpi_system_reset = 2
+} scpi_system_state_t;
+
+int scpi_wait_ready(void);
+void scpi_set_css_power_state(unsigned int mpidr,
+ scpi_power_state_t cpu_state,
+ scpi_power_state_t cluster_state,
+ scpi_power_state_t css_state);
+int scpi_get_css_power_state(unsigned int mpidr, unsigned int *cpu_state_p,
+ unsigned int *cluster_state_p);
+uint32_t scpi_sys_power_state(scpi_system_state_t system_state);
+
+#endif /* CSS_SCPI_H */