summaryrefslogtreecommitdiffstats
path: root/include/drivers/ti/uart
diff options
context:
space:
mode:
Diffstat (limited to 'include/drivers/ti/uart')
-rw-r--r--include/drivers/ti/uart/uart_16550.h94
1 files changed, 94 insertions, 0 deletions
diff --git a/include/drivers/ti/uart/uart_16550.h b/include/drivers/ti/uart/uart_16550.h
new file mode 100644
index 0000000..bddd997
--- /dev/null
+++ b/include/drivers/ti/uart/uart_16550.h
@@ -0,0 +1,94 @@
+/*
+ * Copyright (c) 2015-2018, ARM Limited and Contributors. All rights reserved.
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#ifndef UART_16550_H
+#define UART_16550_H
+
+#include <drivers/console.h>
+
+/* UART16550 Registers */
+#define UARTTX 0x0
+#define UARTRX 0x0
+#define UARTDLL 0x0
+#define UARTIER 0x4
+#define UARTDLLM 0x4
+#define UARTIIR 0x8
+#define UARTFCR 0x8
+#define UARTLCR 0xc
+#define UARTMCR 0x10
+#define UARTLSR 0x14
+#define UARTMSR 0x18
+#define UARTSPR 0x1c
+#define UARTCSR 0x20
+/* Some instances have MDR1 defined as well */
+#define UARTMDR1 0x20
+#define UARTRXFIFOCFG 0x24
+#define UARTMIE 0x28
+#define UARTVNDR 0x2c
+#define UARTASR 0x3c
+
+/* FIFO Control Register bits */
+#define UARTFCR_FIFOMD_16450 (0 << 6)
+#define UARTFCR_FIFOMD_16550 (1 << 6)
+#define UARTFCR_RXTRIG_1 (0 << 6)
+#define UARTFCR_RXTRIG_4 (1 << 6)
+#define UARTFCR_RXTRIG_8 (2 << 6)
+#define UARTFCR_RXTRIG_16 (3 << 6)
+#define UARTFCR_TXTRIG_1 (0 << 4)
+#define UARTFCR_TXTRIG_4 (1 << 4)
+#define UARTFCR_TXTRIG_8 (2 << 4)
+#define UARTFCR_TXTRIG_16 (3 << 4)
+#define UARTFCR_DMAEN (1 << 3) /* Enable DMA mode */
+#define UARTFCR_TXCLR (1 << 2) /* Clear contents of Tx FIFO */
+#define UARTFCR_RXCLR (1 << 1) /* Clear contents of Rx FIFO */
+#define UARTFCR_FIFOEN (1 << 0) /* Enable the Tx/Rx FIFO */
+
+/* Line Control Register bits */
+#define UARTLCR_DLAB (1 << 7) /* Divisor Latch Access */
+#define UARTLCR_SETB (1 << 6) /* Set BREAK Condition */
+#define UARTLCR_SETP (1 << 5) /* Set Parity to LCR[4] */
+#define UARTLCR_EVEN (1 << 4) /* Even Parity Format */
+#define UARTLCR_PAR (1 << 3) /* Parity */
+#define UARTLCR_STOP (1 << 2) /* Stop Bit */
+#define UARTLCR_WORDSZ_5 0 /* Word Length of 5 */
+#define UARTLCR_WORDSZ_6 1 /* Word Length of 6 */
+#define UARTLCR_WORDSZ_7 2 /* Word Length of 7 */
+#define UARTLCR_WORDSZ_8 3 /* Word Length of 8 */
+
+/* Line Status Register bits */
+#define UARTLSR_RXFIFOEMT (1 << 9) /* Rx Fifo Empty */
+#define UARTLSR_TXFIFOFULL (1 << 8) /* Tx Fifo Full */
+#define UARTLSR_RXFIFOERR (1 << 7) /* Rx Fifo Error */
+#define UARTLSR_TEMT (1 << 6) /* Tx Shift Register Empty */
+#define UARTLSR_THRE (1 << 5) /* Tx Holding Register Empty */
+#define UARTLSR_BRK (1 << 4) /* Break Condition Detected */
+#define UARTLSR_FERR (1 << 3) /* Framing Error */
+#define UARTLSR_PERR (1 << 3) /* Parity Error */
+#define UARTLSR_OVRF (1 << 2) /* Rx Overrun Error */
+#define UARTLSR_RDR_BIT (0) /* Rx Data Ready Bit */
+#define UARTLSR_RDR (1 << UARTLSR_RDR_BIT) /* Rx Data Ready */
+
+#ifndef __ASSEMBLER__
+
+#include <stdint.h>
+
+/*
+ * Initialize a new 16550 console instance and register it with the console
+ * framework. The |console| pointer must point to storage that will be valid
+ * for the lifetime of the console, such as a global or static local variable.
+ * Its contents will be reinitialized from scratch.
+ * When |clock| has a value of 0, the UART will *not* be initialised. This
+ * means the UART should already be enabled and the baudrate and clock setup
+ * should have been done already, either by platform specific code or by
+ * previous firmware stages. The |baud| parameter will be ignored in this
+ * case as well.
+ */
+int console_16550_register(uintptr_t baseaddr, uint32_t clock, uint32_t baud,
+ console_t *console);
+
+#endif /*__ASSEMBLER__*/
+
+#endif /* UART_16550_H */