diff options
Diffstat (limited to 'include/lib/xlat_tables/aarch64/xlat_tables_aarch64.h')
-rw-r--r-- | include/lib/xlat_tables/aarch64/xlat_tables_aarch64.h | 96 |
1 files changed, 96 insertions, 0 deletions
diff --git a/include/lib/xlat_tables/aarch64/xlat_tables_aarch64.h b/include/lib/xlat_tables/aarch64/xlat_tables_aarch64.h new file mode 100644 index 0000000..3014c8f --- /dev/null +++ b/include/lib/xlat_tables/aarch64/xlat_tables_aarch64.h @@ -0,0 +1,96 @@ +/* + * Copyright (c) 2017-2018, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef XLAT_TABLES_AARCH64_H +#define XLAT_TABLES_AARCH64_H + +#include <arch.h> +#include <lib/utils_def.h> +#include <lib/xlat_tables/xlat_tables_defs.h> + +#if !defined(PAGE_SIZE) +#error "PAGE_SIZE is not defined." +#endif + +/* + * Encode a Physical Address Space size for its use in TCR_ELx. + */ +unsigned long long tcr_physical_addr_size_bits(unsigned long long max_addr); + +/* + * In AArch64 state, the MMU may support 4 KB, 16 KB and 64 KB page + * granularity. For 4KB granularity, a level 0 table descriptor doesn't support + * block translation. For 16KB, the same thing happens to levels 0 and 1. For + * 64KB, same for level 1. See section D4.3.1 of the ARMv8-A Architecture + * Reference Manual (DDI 0487A.k) for more information. + * + * The define below specifies the first table level that allows block + * descriptors. + */ +#if PAGE_SIZE == PAGE_SIZE_4KB +# define MIN_LVL_BLOCK_DESC U(1) +#elif (PAGE_SIZE == PAGE_SIZE_16KB) || (PAGE_SIZE == PAGE_SIZE_64KB) +# define MIN_LVL_BLOCK_DESC U(2) +#endif + +#define XLAT_TABLE_LEVEL_MIN U(0) + +/* + * Define the architectural limits of the virtual address space in AArch64 + * state. + * + * TCR.TxSZ is calculated as 64 minus the width of said address space. + * The value of TCR.TxSZ must be in the range 16 to 39 [1] or 48 [2], + * depending on Small Translation Table Support which means that + * the virtual address space width must be in the range 48 to 25 or 16 bits. + * + * [1] See the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more + * information: + * Page 1730: 'Input address size', 'For all translation stages'. + * [2] See section 12.2.55 in the ARMv8-A Architecture Reference Manual + * (DDI 0487D.a) + */ +/* Maximum value of TCR_ELx.T(0,1)SZ is 39 */ +#define MIN_VIRT_ADDR_SPACE_SIZE (ULL(1) << (U(64) - TCR_TxSZ_MAX)) + +/* Maximum value of TCR_ELx.T(0,1)SZ is 48 */ +#define MIN_VIRT_ADDR_SPACE_SIZE_TTST \ + (ULL(1) << (U(64) - TCR_TxSZ_MAX_TTST)) +#define MAX_VIRT_ADDR_SPACE_SIZE (ULL(1) << (U(64) - TCR_TxSZ_MIN)) + +/* + * Here we calculate the initial lookup level from the value of the given + * virtual address space size. For a 4 KB page size, + * - level 0 supports virtual address spaces of widths 48 to 40 bits; + * - level 1 from 39 to 31; + * - level 2 from 30 to 22. + * - level 3 from 21 to 16. + * + * Small Translation Table (Armv8.4-TTST) support allows the starting level + * of the translation table from 3 for 4KB granularity. See section 12.2.55 in + * the ARMv8-A Architecture Reference Manual (DDI 0487D.a). In Armv8.3 and below + * wider or narrower address spaces are not supported. As a result, level 3 + * cannot be used as initial lookup level with 4 KB granularity. See section + * D4.2.5 in the ARMv8-A Architecture Reference Manual (DDI 0487A.j) for more + * information. + * + * For example, for a 35-bit address space (i.e. virt_addr_space_size == + * 1 << 35), TCR.TxSZ will be programmed to (64 - 35) = 29. According to Table + * D4-11 in the ARM ARM, the initial lookup level for an address space like that + * is 1. + * + * Note that this macro assumes that the given virtual address space size is + * valid. + */ +#define GET_XLAT_TABLE_LEVEL_BASE(_virt_addr_space_sz) \ + (((_virt_addr_space_sz) > (ULL(1) << L0_XLAT_ADDRESS_SHIFT)) \ + ? 0U \ + : (((_virt_addr_space_sz) > (ULL(1) << L1_XLAT_ADDRESS_SHIFT)) \ + ? 1U \ + : (((_virt_addr_space_sz) > (ULL(1) << L2_XLAT_ADDRESS_SHIFT)) \ + ? 2U : 3U))) + +#endif /* XLAT_TABLES_AARCH64_H */ |