1 files changed, 109 insertions, 0 deletions
diff --git a/plat/brcm/board/stingray/driver/plat_emmc.c b/plat/brcm/board/stingray/driver/plat_emmc.c
new file mode 100644
index 0000000..82085e1
--- /dev/null
+++ b/plat/brcm/board/stingray/driver/plat_emmc.c
@@ -0,0 +1,109 @@
+/*
+ * Copyright (c) 2016 - 2020, Broadcom
+ *
+ * SPDX-License-Identifier: BSD-3-Clause
+ */
+
+#include <stdint.h>
+
+#include <lib/mmio.h>
+
+#include <platform_def.h>
+
+#define ICFG_IPROC_IOPAD_CTRL_4 (IPROC_ROOT + 0x9c0)
+#define ICFG_IPROC_IOPAD_CTRL_5 (IPROC_ROOT + 0x9c4)
+#define ICFG_IPROC_IOPAD_CTRL_6 (IPROC_ROOT + 0x9c8)
+#define ICFG_IPROC_IOPAD_CTRL_7 (IPROC_ROOT + 0x9cc)
+
+#define IOPAD_CTRL4_SDIO0_CD_IND_R 30
+#define IOPAD_CTRL4_SDIO0_CD_SRC_R 31
+#define IOPAD_CTRL4_SDIO0_CD_HYS_R 29
+#define IOPAD_CTRL4_SDIO0_CD_PULL_R 28
+#define IOPAD_CTRL4_SDIO0_CD_DRIVE_R 24
+#define IOPAD_CTRL4_SDIO0_CLK_SDCARD_SRC_R 23
+#define IOPAD_CTRL4_SDIO0_CLK_SDCARD_HYS_R 21
+#define IOPAD_CTRL4_SDIO0_CLK_SDCARD_DRIVE_R 17
+
+#define IOPAD_CTRL4_SDIO0_DATA0_SRC_R 15
+#define IOPAD_CTRL4_SDIO0_DATA0_HYS_R 13
+#define IOPAD_CTRL4_SDIO0_DATA0_DRIVE_R 9
+#define IOPAD_CTRL4_SDIO0_DATA1_SRC_R 7
+#define IOPAD_CTRL4_SDIO0_DATA1_HYS_R 5
+#define IOPAD_CTRL4_SDIO0_DATA1_DRIVE_R 1
+
+#define IOPAD_CTRL5_SDIO0_DATA2_SRC_R 31
+#define IOPAD_CTRL5_SDIO0_DATA2_HYS_R 29
+#define IOPAD_CTRL5_SDIO0_DATA2_DRIVE_R 25
+#define IOPAD_CTRL5_SDIO0_DATA3_SRC_R 23
+#define IOPAD_CTRL5_SDIO0_DATA3_IND_R 22
+#define IOPAD_CTRL5_SDIO0_DATA3_HYS_R 21
+#define IOPAD_CTRL5_SDIO0_DATA3_DRIVE_R 17
+#define IOPAD_CTRL5_SDIO0_DATA4_SRC_R 15
+#define IOPAD_CTRL5_SDIO0_DATA4_HYS_R 13
+#define IOPAD_CTRL5_SDIO0_DATA4_DRIVE_R 9
+#define IOPAD_CTRL5_SDIO0_DATA5_SRC_R 7
+#define IOPAD_CTRL5_SDIO0_DATA5_HYS_R 5
+#define IOPAD_CTRL5_SDIO0_DATA5_DRIVE_R 1
+
+#define IOPAD_CTRL6_SDIO0_DATA6_SRC_R 31
+#define IOPAD_CTRL6_SDIO0_DATA6_HYS_R 29
+#define IOPAD_CTRL6_SDIO0_DATA6_DRIVE_R 25
+#define IOPAD_CTRL6_SDIO0_DATA7_SRC_R 23
+#define IOPAD_CTRL6_SDIO0_DATA7_HYS_R 21
+#define IOPAD_CTRL6_SDIO0_DATA7_DRIVE_R 17
+
+void emmc_soft_reset(void)
+{
+	uint32_t val = 0;
+
+	val = (BIT(IOPAD_CTRL6_SDIO0_DATA7_SRC_R) |
+	       BIT(IOPAD_CTRL6_SDIO0_DATA7_HYS_R) |
+	       BIT(IOPAD_CTRL6_SDIO0_DATA7_DRIVE_R) |
+	       BIT(IOPAD_CTRL6_SDIO0_DATA6_SRC_R) |
+	       BIT(IOPAD_CTRL6_SDIO0_DATA6_HYS_R) |
+	       BIT(IOPAD_CTRL6_SDIO0_DATA6_DRIVE_R));
+
+	mmio_write_32(ICFG_IPROC_IOPAD_CTRL_6, val);
+
+	val = (BIT(IOPAD_CTRL5_SDIO0_DATA3_SRC_R) |
+	       BIT(IOPAD_CTRL5_SDIO0_DATA3_HYS_R) |
+	       BIT(IOPAD_CTRL5_SDIO0_DATA3_DRIVE_R) |
+	       BIT(IOPAD_CTRL5_SDIO0_DATA4_SRC_R) |
+	       BIT(IOPAD_CTRL5_SDIO0_DATA4_HYS_R) |
+	       BIT(IOPAD_CTRL5_SDIO0_DATA4_DRIVE_R) |
+	       BIT(IOPAD_CTRL5_SDIO0_DATA5_SRC_R) |
+	       BIT(IOPAD_CTRL5_SDIO0_DATA5_HYS_R) |
+	       BIT(IOPAD_CTRL5_SDIO0_DATA5_DRIVE_R));
+
+	mmio_write_32(ICFG_IPROC_IOPAD_CTRL_5, val);
+
+	val = (BIT(IOPAD_CTRL4_SDIO0_DATA0_SRC_R) |
+	       BIT(IOPAD_CTRL4_SDIO0_DATA0_HYS_R) |
+	       BIT(IOPAD_CTRL4_SDIO0_DATA0_DRIVE_R) |
+	       BIT(IOPAD_CTRL4_SDIO0_DATA1_SRC_R) |
+	       BIT(IOPAD_CTRL4_SDIO0_DATA1_HYS_R) |
+	       BIT(IOPAD_CTRL4_SDIO0_DATA1_DRIVE_R) |
+	       BIT(IOPAD_CTRL5_SDIO0_DATA2_SRC_R) |
+	       BIT(IOPAD_CTRL5_SDIO0_DATA2_HYS_R) |
+	       BIT(IOPAD_CTRL5_SDIO0_DATA2_DRIVE_R));
+
+	mmio_write_32(ICFG_IPROC_IOPAD_CTRL_6, val);
+
+	val = (BIT(IOPAD_CTRL4_SDIO0_CLK_SDCARD_SRC_R) |
+	       BIT(IOPAD_CTRL4_SDIO0_CLK_SDCARD_HYS_R) |
+	       BIT(IOPAD_CTRL4_SDIO0_CLK_SDCARD_DRIVE_R) |
+	       BIT(IOPAD_CTRL4_SDIO0_CD_SRC_R) |
+	       BIT(IOPAD_CTRL4_SDIO0_CD_HYS_R));
+
+	/*
+	 * set pull-down, clear pull-up=0
+	 * bit 12: pull-down  bit 11: pull-up
+	 * Note:  In emulation, this pull-down setting was not
+	 * sufficient.  Board design likely requires pull down on
+	 * this pin for eMMC.
+	 */
+
+	val |= BIT(IOPAD_CTRL4_SDIO0_CD_PULL_R);
+
+	mmio_write_32(ICFG_IPROC_IOPAD_CTRL_4, val);
+}