summaryrefslogtreecommitdiffstats
path: root/plat/nxp/soc-ls1028a/soc.def
diff options
context:
space:
mode:
Diffstat (limited to 'plat/nxp/soc-ls1028a/soc.def')
-rw-r--r--plat/nxp/soc-ls1028a/soc.def97
1 files changed, 97 insertions, 0 deletions
diff --git a/plat/nxp/soc-ls1028a/soc.def b/plat/nxp/soc-ls1028a/soc.def
new file mode 100644
index 0000000..c23c1bb
--- /dev/null
+++ b/plat/nxp/soc-ls1028a/soc.def
@@ -0,0 +1,97 @@
+#
+# Copyright 2018-2021 NXP
+#
+# SPDX-License-Identifier: BSD-3-Clause
+#
+#
+#------------------------------------------------------------------------------
+#
+# This file contains the basic architecture definitions that drive the build
+#
+# -----------------------------------------------------------------------------
+
+CORE_TYPE := a72
+
+CACHE_LINE := 6
+
+# Set to GIC400 or GIC500
+GIC := GIC500
+
+# Set to CCI400 or CCN504 or CCN508
+INTERCONNECT := CCI400
+
+# Layerscape chassis level - set to 3=LSCH3 or 2=LSCH2
+CHASSIS := 3_2
+
+# TZC used is TZC380 or TZC400
+TZC_ID := TZC400
+
+# CONSOLE is NS16550 or PL011
+CONSOLE := NS16550
+
+# DDR PHY generation to be used
+PLAT_DDR_PHY := PHY_GEN1
+
+PHYS_SYS := 64
+
+# Max Size of CSF header. Required to define BL2 TEXT LIMIT in soc.def
+# Input to CST create_hdr_esbc tool
+CSF_HDR_SZ := 0x3000
+
+# In IMAGE_BL2, compile time flag for handling Cache coherency
+# with CAAM for BL2 running from OCRAM
+SEC_MEM_NON_COHERENT := yes
+
+# OCRAM MAP for BL2
+# Before BL2
+# 0x18000000 - 0x18009fff -> Used by ROM code
+# 0x1800a000 - 0x1800dfff -> CSF header for BL2
+# For FlexSFlexSPI boot
+# 0x1800e000 - 0x18040000 -> Reserved for BL2 binary
+# For SD boot
+# 0x1800e000 - 0x18030000 -> Reserved for BL2 binary
+# 0x18030000 - 0x18040000 -> Reserved for SD buffer
+OCRAM_START_ADDR := 0x18000000
+OCRAM_SIZE := 0x40000
+
+# Area of OCRAM reserved by ROM code
+NXP_ROM_RSVD := 0xa000
+
+# Location of BL2 on OCRAM
+BL2_BASE_ADDR := $(shell echo $$(( $(OCRAM_START_ADDR) + $(NXP_ROM_RSVD) + $(CSF_HDR_SZ) )))
+
+# Covert to HEX to be used by create_pbl.mk
+BL2_BASE := $(shell echo "0x"$$(echo "obase=16; ${BL2_BASE_ADDR}" | bc))
+
+# BL2_HDR_LOC is at (BL2_BASE + NXP_ROM_RSVD)
+# This value BL2_HDR_LOC + CSF_HDR_SZ should not
+# overalp with BL2_BASE
+# Input to CST create_hdr_isbc tool
+BL2_HDR_LOC := 0x1800A000
+
+# SoC ERRATAS to be enabled
+ERRATA_SOC_A008850 := 1
+
+ERRATA_DDR_A009803 := 1
+ERRATA_DDR_A009942 := 1
+ERRATA_DDR_A010165 := 1
+
+# Enable dynamic memory mapping
+PLAT_XLAT_TABLES_DYNAMIC := 1
+
+# Define Endianness of each module
+NXP_GUR_ENDIANNESS := LE
+NXP_DDR_ENDIANNESS := LE
+NXP_SEC_ENDIANNESS := LE
+NXP_SFP_ENDIANNESS := LE
+NXP_SNVS_ENDIANNESS := LE
+NXP_ESDHC_ENDIANNESS := LE
+NXP_QSPI_ENDIANNESS := LE
+NXP_FSPI_ENDIANNESS := LE
+NXP_SCFG_ENDIANNESS := LE
+NXP_GPIO_ENDIANNESS := LE
+
+NXP_SFP_VER := 3_4
+
+# OCRAM ECC Enabled
+OCRAM_ECC_EN := yes