diff options
Diffstat (limited to 'plat/rpi/rpi3/include/rpi_hw.h')
| -rw-r--r-- | plat/rpi/rpi3/include/rpi_hw.h | 114 |
1 files changed, 114 insertions, 0 deletions
diff --git a/plat/rpi/rpi3/include/rpi_hw.h b/plat/rpi/rpi3/include/rpi_hw.h new file mode 100644 index 0000000..2aecab3 --- /dev/null +++ b/plat/rpi/rpi3/include/rpi_hw.h @@ -0,0 +1,114 @@ +/* + * Copyright (c) 2016-2018, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef RPI_HW_H +#define RPI_HW_H + +#include <lib/utils_def.h> + +/* + * Peripherals + */ + +#define RPI_IO_BASE ULL(0x3F000000) +#define RPI_IO_SIZE ULL(0x01000000) + +/* + * ARM <-> VideoCore mailboxes + */ +#define RPI3_MBOX_OFFSET ULL(0x0000B880) +#define RPI3_MBOX_BASE (RPI_IO_BASE + RPI3_MBOX_OFFSET) +/* VideoCore -> ARM */ +#define RPI3_MBOX0_READ_OFFSET ULL(0x00000000) +#define RPI3_MBOX0_PEEK_OFFSET ULL(0x00000010) +#define RPI3_MBOX0_SENDER_OFFSET ULL(0x00000014) +#define RPI3_MBOX0_STATUS_OFFSET ULL(0x00000018) +#define RPI3_MBOX0_CONFIG_OFFSET ULL(0x0000001C) +/* ARM -> VideoCore */ +#define RPI3_MBOX1_WRITE_OFFSET ULL(0x00000020) +#define RPI3_MBOX1_PEEK_OFFSET ULL(0x00000030) +#define RPI3_MBOX1_SENDER_OFFSET ULL(0x00000034) +#define RPI3_MBOX1_STATUS_OFFSET ULL(0x00000038) +#define RPI3_MBOX1_CONFIG_OFFSET ULL(0x0000003C) +/* Mailbox status constants */ +#define RPI3_MBOX_STATUS_FULL_MASK U(0x80000000) /* Set if full */ +#define RPI3_MBOX_STATUS_EMPTY_MASK U(0x40000000) /* Set if empty */ + +/* + * Power management, reset controller, watchdog. + */ +#define RPI3_IO_PM_OFFSET ULL(0x00100000) +#define RPI3_PM_BASE (RPI_IO_BASE + RPI3_IO_PM_OFFSET) +/* Registers on top of RPI3_PM_BASE. */ +#define RPI3_PM_RSTC_OFFSET ULL(0x0000001C) +#define RPI3_PM_RSTS_OFFSET ULL(0x00000020) +#define RPI3_PM_WDOG_OFFSET ULL(0x00000024) +/* Watchdog constants */ +#define RPI3_PM_PASSWORD U(0x5A000000) +#define RPI3_PM_RSTC_WRCFG_MASK U(0x00000030) +#define RPI3_PM_RSTC_WRCFG_FULL_RESET U(0x00000020) +/* + * The RSTS register is used by the VideoCore firmware when booting the + * Raspberry Pi to know which partition to boot from. The partition value is + * formed by bits 0, 2, 4, 6, 8 and 10. Partition 63 is used by said firmware + * to indicate halt. + */ +#define RPI3_PM_RSTS_WRCFG_HALT U(0x00000555) + +/* + * Hardware random number generator. + */ +#define RPI3_IO_RNG_OFFSET ULL(0x00104000) +#define RPI3_RNG_BASE (RPI_IO_BASE + RPI3_IO_RNG_OFFSET) +#define RPI3_RNG_CTRL_OFFSET ULL(0x00000000) +#define RPI3_RNG_STATUS_OFFSET ULL(0x00000004) +#define RPI3_RNG_DATA_OFFSET ULL(0x00000008) +#define RPI3_RNG_INT_MASK_OFFSET ULL(0x00000010) +/* Enable/disable RNG */ +#define RPI3_RNG_CTRL_ENABLE U(0x1) +#define RPI3_RNG_CTRL_DISABLE U(0x0) +/* Number of currently available words */ +#define RPI3_RNG_STATUS_NUM_WORDS_SHIFT U(24) +#define RPI3_RNG_STATUS_NUM_WORDS_MASK U(0xFF) +/* Value to mask interrupts caused by the RNG */ +#define RPI3_RNG_INT_MASK_DISABLE U(0x1) + +/* + * Serial ports: + * 'Mini UART' in the BCM docucmentation is the 8250 compatible UART. + * There is also a PL011 UART, multiplexed to the same pins. + */ +#define RPI3_IO_MINI_UART_OFFSET ULL(0x00215040) +#define RPI3_MINI_UART_BASE (RPI_IO_BASE + RPI3_IO_MINI_UART_OFFSET) +#define RPI3_IO_PL011_UART_OFFSET ULL(0x00201000) +#define RPI3_PL011_UART_BASE (RPI_IO_BASE + RPI3_IO_PL011_UART_OFFSET) +#define RPI3_PL011_UART_CLOCK ULL(48000000) + +/* + * GPIO controller + */ +#define RPI3_IO_GPIO_OFFSET ULL(0x00200000) +#define RPI3_GPIO_BASE (RPI_IO_BASE + RPI3_IO_GPIO_OFFSET) + +/* + * SDHost controller + */ +#define RPI3_IO_SDHOST_OFFSET ULL(0x00202000) +#define RPI3_SDHOST_BASE (RPI_IO_BASE + RPI3_IO_SDHOST_OFFSET) + +/* + * Local interrupt controller + */ +#define RPI3_INTC_BASE_ADDRESS ULL(0x40000000) +/* Registers on top of RPI3_INTC_BASE_ADDRESS */ +#define RPI3_INTC_CONTROL_OFFSET ULL(0x00000000) +#define RPI3_INTC_PRESCALER_OFFSET ULL(0x00000008) +#define RPI3_INTC_MBOX_CONTROL_OFFSET ULL(0x00000050) +#define RPI3_INTC_MBOX_CONTROL_SLOT3_FIQ ULL(0x00000080) +#define RPI3_INTC_PENDING_FIQ_OFFSET ULL(0x00000070) +#define RPI3_INTC_PENDING_FIQ_MBOX3 ULL(0x00000080) + +#endif /* RPI_HW_H */ |