diff options
Diffstat (limited to 'plat/rpi/rpi4/include')
| -rw-r--r-- | plat/rpi/rpi4/include/plat.ld.S | 23 | ||||
| -rw-r--r-- | plat/rpi/rpi4/include/plat_macros.S | 20 | ||||
| -rw-r--r-- | plat/rpi/rpi4/include/platform_def.h | 140 | ||||
| -rw-r--r-- | plat/rpi/rpi4/include/rpi_hw.h | 114 |
4 files changed, 297 insertions, 0 deletions
diff --git a/plat/rpi/rpi4/include/plat.ld.S b/plat/rpi/rpi4/include/plat.ld.S new file mode 100644 index 0000000..9262fad --- /dev/null +++ b/plat/rpi/rpi4/include/plat.ld.S @@ -0,0 +1,23 @@ +/* + * Copyright (c) 2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + * + * Stub linker script to provide the armstub8.bin header before the actual + * code. If the GPU firmware finds a magic value at offset 240 in + * armstub8.bin, it will put the DTB and kernel load address in subsequent + * words. We can then read those values to find the proper NS entry point + * and find our DTB more flexibly. + */ + +MEMORY { + PRERAM (rwx): ORIGIN = 0, LENGTH = 4096 +} + +SECTIONS +{ + .armstub8 . : { + *armstub8_header.o(.text*) + KEEP(*(.armstub8)) + } >PRERAM +} diff --git a/plat/rpi/rpi4/include/plat_macros.S b/plat/rpi/rpi4/include/plat_macros.S new file mode 100644 index 0000000..6007d03 --- /dev/null +++ b/plat/rpi/rpi4/include/plat_macros.S @@ -0,0 +1,20 @@ +/* + * Copyright (c) 2016-2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ +#ifndef PLAT_MACROS_S +#define PLAT_MACROS_S + + /* --------------------------------------------- + * The below required platform porting macro + * prints out relevant platform registers + * whenever an unhandled exception is taken in + * BL31. + * Clobbers: x0 - x10, x16, x17, sp + * --------------------------------------------- + */ + .macro plat_crash_print_regs + .endm + +#endif /* PLAT_MACROS_S */ diff --git a/plat/rpi/rpi4/include/platform_def.h b/plat/rpi/rpi4/include/platform_def.h new file mode 100644 index 0000000..6787ebf --- /dev/null +++ b/plat/rpi/rpi4/include/platform_def.h @@ -0,0 +1,140 @@ +/* + * Copyright (c) 2015-2019, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef PLATFORM_DEF_H +#define PLATFORM_DEF_H + +#include <arch.h> +#include <common/tbbr/tbbr_img_def.h> +#include <lib/utils_def.h> +#include <plat/common/common_def.h> + +#include "rpi_hw.h" + +/* Special value used to verify platform parameters from BL2 to BL31 */ +#define RPI3_BL31_PLAT_PARAM_VAL ULL(0x0F1E2D3C4B5A6978) + +#define PLATFORM_STACK_SIZE ULL(0x1000) + +#define PLATFORM_MAX_CPUS_PER_CLUSTER U(4) +#define PLATFORM_CLUSTER_COUNT U(1) +#define PLATFORM_CLUSTER0_CORE_COUNT PLATFORM_MAX_CPUS_PER_CLUSTER +#define PLATFORM_CORE_COUNT PLATFORM_CLUSTER0_CORE_COUNT + +#define RPI_PRIMARY_CPU U(0) + +#define PLAT_MAX_PWR_LVL MPIDR_AFFLVL1 +#define PLAT_NUM_PWR_DOMAINS (PLATFORM_CLUSTER_COUNT + \ + PLATFORM_CORE_COUNT) + +#define PLAT_MAX_RET_STATE U(1) +#define PLAT_MAX_OFF_STATE U(2) + +/* Local power state for power domains in Run state. */ +#define PLAT_LOCAL_STATE_RUN U(0) +/* Local power state for retention. Valid only for CPU power domains */ +#define PLAT_LOCAL_STATE_RET U(1) +/* + * Local power state for OFF/power-down. Valid for CPU and cluster power + * domains. + */ +#define PLAT_LOCAL_STATE_OFF U(2) + +/* + * Macros used to parse state information from State-ID if it is using the + * recommended encoding for State-ID. + */ +#define PLAT_LOCAL_PSTATE_WIDTH U(4) +#define PLAT_LOCAL_PSTATE_MASK ((U(1) << PLAT_LOCAL_PSTATE_WIDTH) - 1) + +/* + * Some data must be aligned on the biggest cache line size in the platform. + * This is known only to the platform as it might have a combination of + * integrated and external caches. + */ +#define CACHE_WRITEBACK_SHIFT U(6) +#define CACHE_WRITEBACK_GRANULE (U(1) << CACHE_WRITEBACK_SHIFT) + +/* + * I/O registers. + */ +#define DEVICE0_BASE RPI_IO_BASE +#define DEVICE0_SIZE RPI_IO_SIZE + +/* + * Mailbox to control the secondary cores. All secondary cores are held in a + * wait loop in cold boot. To release them perform the following steps (plus + * any additional barriers that may be needed): + * + * uint64_t *entrypoint = (uint64_t *)PLAT_RPI3_TM_ENTRYPOINT; + * *entrypoint = ADDRESS_TO_JUMP_TO; + * + * uint64_t *mbox_entry = (uint64_t *)PLAT_RPI3_TM_HOLD_BASE; + * mbox_entry[cpu_id] = PLAT_RPI3_TM_HOLD_STATE_GO; + * + * sev(); + */ +/* The secure entry point to be used on warm reset by all CPUs. */ +#define PLAT_RPI3_TM_ENTRYPOINT 0x100 +#define PLAT_RPI3_TM_ENTRYPOINT_SIZE ULL(8) + +/* Hold entries for each CPU. */ +#define PLAT_RPI3_TM_HOLD_BASE (PLAT_RPI3_TM_ENTRYPOINT + \ + PLAT_RPI3_TM_ENTRYPOINT_SIZE) +#define PLAT_RPI3_TM_HOLD_ENTRY_SIZE ULL(8) +#define PLAT_RPI3_TM_HOLD_SIZE (PLAT_RPI3_TM_HOLD_ENTRY_SIZE * \ + PLATFORM_CORE_COUNT) + +#define PLAT_RPI3_TRUSTED_MAILBOX_SIZE (PLAT_RPI3_TM_ENTRYPOINT_SIZE + \ + PLAT_RPI3_TM_HOLD_SIZE) + +#define PLAT_RPI3_TM_HOLD_STATE_WAIT ULL(0) +#define PLAT_RPI3_TM_HOLD_STATE_GO ULL(1) +#define PLAT_RPI3_TM_HOLD_STATE_BSP_OFF ULL(2) + +/* + * BL31 specific defines. + * + * Put BL31 at the top of the Trusted SRAM. BL31_BASE is calculated using the + * current BL31 debug size plus a little space for growth. + */ +#define PLAT_MAX_BL31_SIZE ULL(0x80000) + +#define BL31_BASE ULL(0x1000) +#define BL31_LIMIT ULL(0x80000) +#define BL31_PROGBITS_LIMIT ULL(0x80000) + +#define SEC_SRAM_ID 0 +#define SEC_DRAM_ID 1 + +/* + * Other memory-related defines. + */ +#define PLAT_PHY_ADDR_SPACE_SIZE (ULL(1) << 32) +#define PLAT_VIRT_ADDR_SPACE_SIZE (ULL(1) << 32) + +#define MAX_MMAP_REGIONS 8 +#define MAX_XLAT_TABLES 4 + +#define MAX_IO_DEVICES U(3) +#define MAX_IO_HANDLES U(4) + +#define MAX_IO_BLOCK_DEVICES U(1) + +/* + * Serial-related constants. + */ +#define PLAT_RPI_MINI_UART_BASE RPI4_MINI_UART_BASE +#define PLAT_RPI_PL011_UART_BASE RPI4_PL011_UART_BASE +#define PLAT_RPI_PL011_UART_CLOCK RPI4_PL011_UART_CLOCK +#define PLAT_RPI_UART_BAUDRATE ULL(115200) + +/* + * System counter + */ +#define SYS_COUNTER_FREQ_IN_TICKS ULL(54000000) + +#endif /* PLATFORM_DEF_H */ diff --git a/plat/rpi/rpi4/include/rpi_hw.h b/plat/rpi/rpi4/include/rpi_hw.h new file mode 100644 index 0000000..0430d46 --- /dev/null +++ b/plat/rpi/rpi4/include/rpi_hw.h @@ -0,0 +1,114 @@ +/* + * Copyright (c) 2016-2021, ARM Limited and Contributors. All rights reserved. + * + * SPDX-License-Identifier: BSD-3-Clause + */ + +#ifndef RPI_HW_H +#define RPI_HW_H + +#include <lib/utils_def.h> + +/* + * Peripherals + */ + +#define RPI_IO_BASE ULL(0xFC000000) +#define RPI_IO_SIZE ULL(0x04000000) + +#define RPI_LEGACY_BASE (ULL(0x02000000) + RPI_IO_BASE) + +/* + * ARM <-> VideoCore mailboxes + */ +#define RPI3_MBOX_OFFSET ULL(0x0000B880) +#define RPI3_MBOX_BASE (RPI_LEGACY_BASE + RPI3_MBOX_OFFSET) +/* VideoCore -> ARM */ +#define RPI3_MBOX0_READ_OFFSET ULL(0x00000000) +#define RPI3_MBOX0_PEEK_OFFSET ULL(0x00000010) +#define RPI3_MBOX0_SENDER_OFFSET ULL(0x00000014) +#define RPI3_MBOX0_STATUS_OFFSET ULL(0x00000018) +#define RPI3_MBOX0_CONFIG_OFFSET ULL(0x0000001C) +/* ARM -> VideoCore */ +#define RPI3_MBOX1_WRITE_OFFSET ULL(0x00000020) +#define RPI3_MBOX1_PEEK_OFFSET ULL(0x00000030) +#define RPI3_MBOX1_SENDER_OFFSET ULL(0x00000034) +#define RPI3_MBOX1_STATUS_OFFSET ULL(0x00000038) +#define RPI3_MBOX1_CONFIG_OFFSET ULL(0x0000003C) +/* Mailbox status constants */ +#define RPI3_MBOX_STATUS_FULL_MASK U(0x80000000) /* Set if full */ +#define RPI3_MBOX_STATUS_EMPTY_MASK U(0x40000000) /* Set if empty */ + +/* + * Power management, reset controller, watchdog. + */ +#define RPI3_IO_PM_OFFSET ULL(0x00100000) +#define RPI3_PM_BASE (RPI_LEGACY_BASE + RPI3_IO_PM_OFFSET) +/* Registers on top of RPI3_PM_BASE. */ +#define RPI3_PM_RSTC_OFFSET ULL(0x0000001C) +#define RPI3_PM_RSTS_OFFSET ULL(0x00000020) +#define RPI3_PM_WDOG_OFFSET ULL(0x00000024) +/* Watchdog constants */ +#define RPI3_PM_PASSWORD U(0x5A000000) +#define RPI3_PM_RSTC_WRCFG_MASK U(0x00000030) +#define RPI3_PM_RSTC_WRCFG_FULL_RESET U(0x00000020) +/* + * The RSTS register is used by the VideoCore firmware when booting the + * Raspberry Pi to know which partition to boot from. The partition value is + * formed by bits 0, 2, 4, 6, 8 and 10. Partition 63 is used by said firmware + * to indicate halt. + */ +#define RPI3_PM_RSTS_WRCFG_HALT U(0x00000555) + +/* + * Hardware random number generator. + */ +#define RPI3_IO_RNG_OFFSET ULL(0x00104000) +#define RPI3_RNG_BASE (RPI_LEGACY_BASE + RPI3_IO_RNG_OFFSET) +#define RPI3_RNG_CTRL_OFFSET ULL(0x00000000) +#define RPI3_RNG_STATUS_OFFSET ULL(0x00000004) +#define RPI3_RNG_DATA_OFFSET ULL(0x00000008) +#define RPI3_RNG_INT_MASK_OFFSET ULL(0x00000010) +/* Enable/disable RNG */ +#define RPI3_RNG_CTRL_ENABLE U(0x1) +#define RPI3_RNG_CTRL_DISABLE U(0x0) +/* Number of currently available words */ +#define RPI3_RNG_STATUS_NUM_WORDS_SHIFT U(24) +#define RPI3_RNG_STATUS_NUM_WORDS_MASK U(0xFF) +/* Value to mask interrupts caused by the RNG */ +#define RPI3_RNG_INT_MASK_DISABLE U(0x1) + +/* + * Serial ports: + * 'Mini UART' in the BCM docucmentation is the 8250 compatible UART. + * There is also a PL011 UART, multiplexed to the same pins. + */ +#define RPI4_IO_MINI_UART_OFFSET ULL(0x00215040) +#define RPI4_MINI_UART_BASE (RPI_LEGACY_BASE + RPI4_IO_MINI_UART_OFFSET) +#define RPI4_IO_PL011_UART_OFFSET ULL(0x00201000) +#define RPI4_PL011_UART_BASE (RPI_LEGACY_BASE + RPI4_IO_PL011_UART_OFFSET) +#define RPI4_PL011_UART_CLOCK ULL(48000000) + +/* + * GPIO controller + */ +#define RPI3_IO_GPIO_OFFSET ULL(0x00200000) +#define RPI3_GPIO_BASE (RPI_LEGACY_BASE + RPI3_IO_GPIO_OFFSET) + +/* + * SDHost controller + */ +#define RPI3_IO_SDHOST_OFFSET ULL(0x00202000) +#define RPI3_SDHOST_BASE (RPI_LEGACY_BASE + RPI3_IO_SDHOST_OFFSET) + +/* + * GIC interrupt controller + */ +#define RPI_HAVE_GIC +#define RPI4_GIC_GICD_BASE ULL(0xff841000) +#define RPI4_GIC_GICC_BASE ULL(0xff842000) + +#define RPI4_LOCAL_CONTROL_BASE_ADDRESS ULL(0xff800000) +#define RPI4_LOCAL_CONTROL_PRESCALER ULL(0xff800008) + +#endif /* RPI_HW_H */ |