1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
|
/*
* Copyright (c) 2018-2022, Arm Limited. All rights reserved.
*
* SPDX-License-Identifier: BSD-3-Clause
*/
#include <common/debug.h>
#include <drivers/arm/css/css_mhu_doorbell.h>
#include <drivers/arm/css/scmi.h>
#include <drivers/arm/css/sds.h>
#include <drivers/arm/gic600_multichip.h>
#include <lib/mmio.h>
#include <lib/utils.h>
#include <plat/arm/common/plat_arm.h>
#include "n1sdp_def.h"
#include <platform_def.h>
/*
* Platform information structure stored in SDS.
* This structure holds information about platform's DDR
* size which will be used to zero out the memory before
* enabling the ECC capability as well as information
* about multichip setup
* - multichip mode
* - secondary_count
* - Local DDR size in GB, DDR memory in master board
* - Remote DDR size in GB, DDR memory in secondary board
*/
struct n1sdp_plat_info {
bool multichip_mode;
uint8_t secondary_count;
uint8_t local_ddr_size;
uint8_t remote_ddr_size;
} __packed;
static scmi_channel_plat_info_t n1sdp_scmi_plat_info = {
.scmi_mbx_mem = N1SDP_SCMI_PAYLOAD_BASE,
.db_reg_addr = PLAT_CSS_MHU_BASE + CSS_SCMI_MHU_DB_REG_OFF,
.db_preserve_mask = 0xfffffffe,
.db_modify_mask = 0x1,
.ring_doorbell = &mhu_ring_doorbell
};
static struct gic600_multichip_data n1sdp_multichip_data __init = {
.rt_owner_base = PLAT_ARM_GICD_BASE,
.rt_owner = 0,
.chip_count = 1,
.chip_addrs = {
PLAT_ARM_GICD_BASE >> 16,
PLAT_ARM_GICD_BASE >> 16
},
.spi_ids = {
{32, 479},
{512, 959}
}
};
static uintptr_t n1sdp_multichip_gicr_frames[3] = {
PLAT_ARM_GICR_BASE,
PLAT_ARM_GICR_BASE + PLAT_ARM_REMOTE_CHIP_OFFSET,
0
};
scmi_channel_plat_info_t *plat_css_get_scmi_info(int channel_id)
{
return &n1sdp_scmi_plat_info;
}
const plat_psci_ops_t *plat_arm_psci_override_pm_ops(plat_psci_ops_t *ops)
{
return css_scmi_override_pm_ops(ops);
}
/*
* N1SDP platform supports RDIMMs with ECC capability. To use the ECC
* capability, the entire DDR memory space has to be zeroed out before
* enabling the ECC bits in DMC620. Zeroing out several gigabytes of
* memory from SCP is quite time consuming so the following function
* is added to zero out the DDR memory from application processor which is
* much faster compared to SCP. Local DDR memory is zeroed out during BL2
* stage. If remote chip is connected, it's DDR memory is zeroed out here.
*/
void remote_dmc_ecc_setup(uint8_t remote_ddr_size)
{
uint64_t remote_dram2_size;
remote_dram2_size = (remote_ddr_size * 1024UL * 1024UL * 1024UL) -
N1SDP_REMOTE_DRAM1_SIZE;
/* multichip setup */
INFO("Zeroing remote DDR memories\n");
zero_normalmem((void *)N1SDP_REMOTE_DRAM1_BASE,
N1SDP_REMOTE_DRAM1_SIZE);
flush_dcache_range(N1SDP_REMOTE_DRAM1_BASE, N1SDP_REMOTE_DRAM1_SIZE);
zero_normalmem((void *)N1SDP_REMOTE_DRAM2_BASE, remote_dram2_size);
flush_dcache_range(N1SDP_REMOTE_DRAM2_BASE, remote_dram2_size);
INFO("Enabling ECC on remote DMCs\n");
/* Set DMCs to CONFIG state before writing ERR0CTLR0 register */
mmio_write_32(N1SDP_REMOTE_DMC0_MEMC_CMD_REG,
N1SDP_DMC_MEMC_CMD_CONFIG);
mmio_write_32(N1SDP_REMOTE_DMC1_MEMC_CMD_REG,
N1SDP_DMC_MEMC_CMD_CONFIG);
/* Enable ECC in DMCs */
mmio_setbits_32(N1SDP_REMOTE_DMC0_ERR0CTLR0_REG,
N1SDP_DMC_ERR0CTLR0_ECC_EN);
mmio_setbits_32(N1SDP_REMOTE_DMC1_ERR0CTLR0_REG,
N1SDP_DMC_ERR0CTLR0_ECC_EN);
/* Set DMCs to READY state */
mmio_write_32(N1SDP_REMOTE_DMC0_MEMC_CMD_REG, N1SDP_DMC_MEMC_CMD_READY);
mmio_write_32(N1SDP_REMOTE_DMC1_MEMC_CMD_REG, N1SDP_DMC_MEMC_CMD_READY);
}
void n1sdp_bl31_multichip_setup(void)
{
plat_arm_override_gicr_frames(n1sdp_multichip_gicr_frames);
gic600_multichip_init(&n1sdp_multichip_data);
}
void bl31_platform_setup(void)
{
int ret;
struct n1sdp_plat_info plat_info;
ret = sds_init();
if (ret != SDS_OK) {
ERROR("SDS initialization failed\n");
panic();
}
ret = sds_struct_read(N1SDP_SDS_PLATFORM_INFO_STRUCT_ID,
N1SDP_SDS_PLATFORM_INFO_OFFSET,
&plat_info,
N1SDP_SDS_PLATFORM_INFO_SIZE,
SDS_ACCESS_MODE_NON_CACHED);
if (ret != SDS_OK) {
ERROR("Error getting platform info from SDS\n");
panic();
}
/* Validate plat_info SDS */
if ((plat_info.local_ddr_size == 0)
|| (plat_info.local_ddr_size > N1SDP_MAX_DDR_CAPACITY_GB)
|| (plat_info.remote_ddr_size > N1SDP_MAX_DDR_CAPACITY_GB)
|| (plat_info.secondary_count > N1SDP_MAX_SECONDARY_COUNT)) {
ERROR("platform info SDS is corrupted\n");
panic();
}
if (plat_info.multichip_mode) {
n1sdp_multichip_data.chip_count = plat_info.secondary_count + 1;
n1sdp_bl31_multichip_setup();
}
arm_bl31_platform_setup();
/* Check if remote memory is present */
if ((plat_info.multichip_mode) && (plat_info.remote_ddr_size != 0))
remote_dmc_ecc_setup(plat_info.remote_ddr_size);
}
|
