Adding upstream version 1:2.3.19.1+dfsg1.upstream/1%2.3.19.1+dfsg1upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 212 insertions, 0 deletions

diff --git a/doc/wiki/Upgrading.2.3.txt b/doc/wiki/Upgrading.2.3.txt
new file mode 100644
index 0000000..8cda65f
--- /dev/null
+++ b/doc/wiki/Upgrading.2.3.txt
@@ -0,0 +1,212 @@
+Upgrading Dovecot v2.2 to v2.3
+==============================
+
+Downgrading is possible to v2.2.27 and later. (v2.2.27 accidentally broke
+dovecot.index* backwards compatibility a bit.)
+
+Settings Changes
+----------------
+
+ * 'director_consistent_hashing' setting removed. It's always assumed to be
+   "yes" now.
+    * *WARNING*: You can't run a director ring with mixed
+      'director_consistent_hashing' settings. If you already didn't have it set
+      to "yes", upgrading to v2.3 will require you to shutdown the entire
+      director ring. It may be safer to first do this setting change in v2.2
+      before the upgrade.
+       * If you really don't wish to shutdown the ring, an alternative would be
+         to set up a whole new director ring. Then start moving users to the
+         new ring in the Dovecot proxy. To avoid the same user having
+         connections to both rings at the same time (-> two backends at the
+         same time), this would need to be done so that passdb moves the user
+         to the new ring and old connections are kicked. See
+         <PasswordDatabase/ExtraFields/Proxy#moving>
+         [PasswordDatabase.ExtraFields.Proxy.txt]
+ * 'director_doveadm_port' setting removed. Name the 'inet_listener doveadm {
+   .. }' instead.
+ * 'mdbox_purge_preserve_alt' setting removed. It's always assumed to be "yes"
+   now.
+ * 'recipient_delimiter' setting used to be treated as a separator string. Now
+   it's instead treated as a list of alternative delimiter characters.
+ * Time interval based settings no longer default to "seconds". All numbers
+   must explicitly be followed by the time unit (except 0). This is important,
+   because some settings now support milliseconds as well.
+ * fs-posix: prefix=path parameter no longer automatically appends '/' to the
+   path if it's not there. This allows using it properly as a prefix, instead
+   of only a directory prefix. Make sure you have the '/' appended to the
+   prefix, or the "dir/filename" will be accessed just as "dirnamename".
+ * 'ssl_protocols' setting was replaced by 'ssl_min_protocol'. Now you only
+   specify the minimum ssl protocol version Dovecot accepts, defaulting to
+   TLSv1.
+ * 'ssl_parameters' was replaced with 'ssl_dh'. See <Diffie-Hellman Parameters
+   for SSL> [Upgrading.2.3.txt].
+ * 'SSLv2' is no longer supported in 'ssl_protocols'.
+
+Statistics Redesign
+-------------------
+
+The statistics code was redesigned.
+
+ * Statistics is no longer optional - it is always there.
+ * The old "stats" plugin was renamed to "old_stats".
+ * The "doveadm stats" command was renamed to "doveadm oldstats".
+    * There's a new "doveadm stats" command that isn't compatible with the old
+      one.
+ * The new stats code doesn't require a plugin, so make sure you remove 'stats'
+   from 'mail_plugin' setting. For more details see <Statistics.txt>.
+
+Config changes required to 2.2.x config to keep using the "old" stats:
+
+ * 'mail_plugins = stats' -> 'mail_plugins = old_stats'
+ * 'mail_plugins = imap_stats' -> 'mail_plugins = imap_old_stats'
+ * 'service stats' -> 'service old-stats'
+    * 'executable = stats' -> 'executable = old-stats'
+    * 'fifo_listener stats-mail' -> 'fifo_listener old-stats-mail'
+    * 'fifo_listener stats-user' -> 'fifo_listener old-stats-user'
+    * 'unix_listener stats' -> 'unix_listener old-stats'
+ * 'plugin { stats_refresh }' -> 'plugin { old_stats_refresh }'
+ * 'plugin { stats_notify_path }' -> 'plugin { old_stats_notify_path }'
+ * 'plugin { stats_track_cmds }' -> 'plugin { old_stats_track_cmds }'
+ * 'auth_stats' -> keep as 'auth_stats'
+ * 'stats_*' settings -> 'old_stats_*'
+
+Submission Service (new)
+------------------------
+
+Dovecot can now act as a submission service. See <Submission.txt> for more
+information.
+
+Localhost Auth Penalty
+----------------------
+
+Dovecot no longer disables auth penalty waits for clients connecting from
+localhost (or 'login_trusted_networks' in general). The previous idea was that
+it would likely be a webmail that would have its own delays, but there are no
+guarantees about this.
+
+If the old behavior is still wanted, it's possible to do nowadays even more
+generically with e.g. setting following as the first passdb:
+
+---%<-------------------------------------------------------------------------
+passdb {
+ driver = passwd-file
+ args = username_format=%{rip} /etc/dovecot/passdb
+ default_fields = noauthenticate=y
+}
+---%<-------------------------------------------------------------------------
+
+/etc/dovecot/passdb:
+
+---%<-------------------------------------------------------------------------
+127.0.0.1:::::::nodelay=yes
+192.168.10.124:::::::nodelay=yes
+---%<-------------------------------------------------------------------------
+
+Changed Setting Defaults
+------------------------
+
++--------------------------+-----------------------------+----------------------------------------------------------------------------------------------+
+| *Setting*                | *Old Default Value*         | *New Default Value*                                                                          |
++--------------------------+-----------------------------+----------------------------------------------------------------------------------------------+
+| 'mdbox_rotate_size'      | 2M                          | 10M                                                                                          |
++--------------------------+-----------------------------+----------------------------------------------------------------------------------------------+
+| 'mailbox_list_index'     | no                          | yes                                                                                          |
++--------------------------+-----------------------------+----------------------------------------------------------------------------------------------+
+| 'imap_logout_format'     | n=%i out=%o                 | in=%i out=%o deleted=%{deleted} expunged=%{expunged} trashed=%{trashed}                      |
+|                          |                             | hdr_count=%{fetch_hdr_count} hdr_bytes=%{fetch_hdr_bytes} body_count=%{fetch_body_count}     |
+|                          |                             | body_bytes=%{fetch_body_bytes}                                                               |
++--------------------------+-----------------------------+----------------------------------------------------------------------------------------------+
+| 'ssl_cipher_list'        | ALL:!LOW:!SSLv2:!EXP:!aNULL | ALL:!kRSA:!SRP:!kDHd:!DSS:!aNULL:!eNULL:!EXPORT:!DES:!3DES:!MD5:!PSK:!RC4:!ADH:!LOW@STRENGTH |
++--------------------------+-----------------------------+----------------------------------------------------------------------------------------------+
+| 'mail_log_prefix'        | "%s(%u): "                  | "%s(%u)<%{pid}><%{session}>: "                                                               |
++--------------------------+-----------------------------+----------------------------------------------------------------------------------------------+
+| mysql:                   | no                          | yes                                                                                          |
+| 'ssl_verify_server_cert' |                             |                                                                                              |
++--------------------------+-----------------------------+----------------------------------------------------------------------------------------------+
+| 'ssl_options'            |                             | no_compression is now the default, and a new compression option is introduced for enabling   |
+|                          |                             | compression                                                                                  |
++--------------------------+-----------------------------+----------------------------------------------------------------------------------------------+
+
+Diffie-Hellman Parameters for SSL
+---------------------------------
+
+ * ssl-parameters.dat file is now obsolete. You should use ssl_dh setting
+   instead:'ssl_dh=</etc/dovecot/dh.pem'
+    * You can convert an existing ssl-parameters.dat to dh.pem:
+
+      ---%<-------------------------------------------------------------------
+      dd if=/var/lib/dovecot/ssl-parameters.dat bs=1 skip=88 | openssl dhparam
+      -inform der > /etc/dovecot/dh.pem
+      ---%<-------------------------------------------------------------------
+
+ * ssl-params process has also been removed, as it is no longer used to
+   generate these parameters.
+ * You are encouraged to create at least 2048 bit parameters. 4096 is industry
+   recommendation.
+ * Note that it will take LONG TIME to generate the parameters, and it should
+   be done with a machine that has GOOD SOURCE OF ENTROPY. Running it on a
+   virtual machine is not recommended, unless there is some entropy
+   helper/driver installed. Running this on your production proxy can starve
+   connections due to lack of entropy.
+ * Since v2.3.3+ DH parameter usage is *optional* and can be omitted. You are
+   invited to amend ciphers to disallow non-ECC based DH algorithms, but if you
+   don't and someone does try to use them, error will be emitted.
+    * Example:
+      'ssl_cipher_list=ALL:!kRSA:!SRP:!kDHd:!DSS:!aNULL:!eNULL:!EXPORT:!DES:!3DES:!MD5:!PSK:!RC4:!ADH:!LOW:!DH@STRENGTH'
+
+Other Changes
+-------------
+
+ * Invalid 'postmaster_address' now causes a failure early on with
+   sieve/imap_sieve plugin enabled. It still defaults to 'postmaster@%d', which
+   expands to invalid 'postmaster@' address if your usernames do not contain a
+   domain, or are converted into domainless usernames by passdb/userdb. See
+   <DomainLost.txt>.
+ * Linux: Dovecot no longer enables core dumping for "setuid processes", which
+   most of them are.
+    * To enable them with Linux kernel v3.6+: Make sure core dumps get written
+      to a globally shared directory and enable them with:'sysctl -w
+      fs.suid_dumpable=2'
+       * With older Linux kernel versions you can set it to 1, but that's not
+         good for security of your system.
+    * You can also revert to old behavior with: 'import_environment =
+      $import_environment PR_SET_DUMPABLE'
+       * However, this also may have some security implications depending on
+         the setup. Mainly if you have system users and you've enabled
+         chrooting or mail_access_groups, this could allow the system users to
+         gain unintentional access.
+ * userdb nss was removed. Use userdb passwd instead.
+ * doveadm: table formatter prints the header now to stdout, not stderr
+ * doveadm: Removed mount commands
+ * OpenSSL version is required to be at least 1.0.1 for Dovecot to build
+ * subscriptions file is written in a new version 2 format. Dovecot v2.2.17 and
+   newer can read this file.
+ * mail_log plugin: Headers are logged as UTF-8 (instead of MIME-encoded)
+ * auth: When iterating users in userdb passwd, skip users that aren't in the
+   first/last_valid_gid range
+ * auth protocol has changed some error fields:
+    * temp -> code=temp_fail
+    * authz -> code=authz_fail
+    * user_disabled -> code=user_disabled
+    * pass_expired -> code=pass_expired
+ * auth now supports bcrypt algorithm by default.
+ * Some API changes have been made, if you have your own plugins please be
+   aware that they might require change(s) to be compatible again.
+ * Due to the new stats environment, for now some environments may get harmless
+   errors about not being able to connect to stats-writer socket. To avoid
+   these errors, give enough permissions for the processes to connect to the
+   stats-writer, for example:
+
+---%<-------------------------------------------------------------------------
+service stats {
+  client_limit = 10000 # make this large enough so all Dovecot processes
+(especially imap, pop3, lmtp) can connect to it
+  unix_listener stats-writer {
+    user = vmail
+    #mode = 0666 # Use only if nothing else works. It's a bit insecure, since
+it allows any user in the system to mess up with the statistics.
+  }
+}
+---%<-------------------------------------------------------------------------
+
+(This file was created from the wiki on 2019-06-19 12:42)