diff options
Diffstat (limited to 'pigeonhole/doc/example-config')
| -rw-r--r-- | pigeonhole/doc/example-config/Makefile.am | 10 | ||||
| -rw-r--r-- | pigeonhole/doc/example-config/Makefile.in | 755 | ||||
| -rw-r--r-- | pigeonhole/doc/example-config/conf.d/20-managesieve.conf | 84 | ||||
| -rw-r--r-- | pigeonhole/doc/example-config/conf.d/90-sieve-extprograms.conf | 44 | ||||
| -rw-r--r-- | pigeonhole/doc/example-config/conf.d/90-sieve.conf | 205 | ||||
| -rw-r--r-- | pigeonhole/doc/example-config/conf.d/Makefile.am | 10 | ||||
| -rw-r--r-- | pigeonhole/doc/example-config/conf.d/Makefile.in | 576 | ||||
| -rw-r--r-- | pigeonhole/doc/example-config/sieve-ldap.conf | 74 |
8 files changed, 1758 insertions, 0 deletions
diff --git a/pigeonhole/doc/example-config/Makefile.am b/pigeonhole/doc/example-config/Makefile.am new file mode 100644 index 0000000..f30c9fb --- /dev/null +++ b/pigeonhole/doc/example-config/Makefile.am @@ -0,0 +1,10 @@ +SUBDIRS = conf.d + +pkgsysconfdir = $(sysconfdir)/dovecot + +exampledir = $(dovecot_docdir)/example-config +example_DATA = \ + sieve-ldap.conf + +EXTRA_DIST = \ + $(example_DATA) diff --git a/pigeonhole/doc/example-config/Makefile.in b/pigeonhole/doc/example-config/Makefile.in new file mode 100644 index 0000000..b74a021 --- /dev/null +++ b/pigeonhole/doc/example-config/Makefile.in @@ -0,0 +1,755 @@ +# Makefile.in generated by automake 1.16.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = doc/example-config +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/dovecot.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/dummy-config.h \ + $(top_builddir)/pigeonhole-config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ + ctags-recursive dvi-recursive html-recursive info-recursive \ + install-data-recursive install-dvi-recursive \ + install-exec-recursive install-html-recursive \ + install-info-recursive install-pdf-recursive \ + install-ps-recursive install-recursive installcheck-recursive \ + installdirs-recursive pdf-recursive ps-recursive \ + tags-recursive uninstall-recursive +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(exampledir)" +DATA = $(example_DATA) +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +am__recursive_targets = \ + $(RECURSIVE_TARGETS) \ + $(RECURSIVE_CLEAN_TARGETS) \ + $(am__extra_recursive_targets) +AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ + distdir distdir-am +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +# Read a list of newline-separated strings from the standard input, +# and print each of them once, without duplicates. Input order is +# *not* preserved. +am__uniquify_input = $(AWK) '\ + BEGIN { nonempty = 0; } \ + { items[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in items) print i; }; } \ +' +# Make sure the list of sources is unique. This is necessary because, +# e.g., the same source file might be shared among _SOURCES variables +# for different programs/libraries. +am__define_uniq_tagged_files = \ + list='$(am__tagged_files)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | $(am__uniquify_input)` +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +am__DIST_COMMON = $(srcdir)/Makefile.in +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +am__relativize = \ + dir0=`pwd`; \ + sed_first='s,^\([^/]*\)/.*$$,\1,'; \ + sed_rest='s,^[^/]*/*,,'; \ + sed_last='s,^.*/\([^/]*\)$$,\1,'; \ + sed_butlast='s,/*[^/]*$$,,'; \ + while test -n "$$dir1"; do \ + first=`echo "$$dir1" | sed -e "$$sed_first"`; \ + if test "$$first" != "."; then \ + if test "$$first" = ".."; then \ + dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ + dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ + else \ + first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ + if test "$$first2" = "$$first"; then \ + dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ + else \ + dir2="../$$dir2"; \ + fi; \ + dir0="$$dir0"/"$$first"; \ + fi; \ + fi; \ + dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ + done; \ + reldir="$$dir2" +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BINARY_CFLAGS = @BINARY_CFLAGS@ +BINARY_LDFLAGS = @BINARY_LDFLAGS@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ +DLLTOOL = @DLLTOOL@ +DOVECOT_BINARY_CFLAGS = @DOVECOT_BINARY_CFLAGS@ +DOVECOT_BINARY_LDFLAGS = @DOVECOT_BINARY_LDFLAGS@ +DOVECOT_CFLAGS = @DOVECOT_CFLAGS@ +DOVECOT_COMPRESS_LIBS = @DOVECOT_COMPRESS_LIBS@ +DOVECOT_INSTALLED = @DOVECOT_INSTALLED@ +DOVECOT_LIBS = @DOVECOT_LIBS@ +DOVECOT_LUA_CFLAGS = @DOVECOT_LUA_CFLAGS@ +DOVECOT_LUA_LIBS = @DOVECOT_LUA_LIBS@ +DOVECOT_SQL_LIBS = @DOVECOT_SQL_LIBS@ +DOVECOT_SSL_LIBS = @DOVECOT_SSL_LIBS@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDAP_LIBS = @LDAP_LIBS@ +LDFLAGS = @LDFLAGS@ +LIBDOVECOT = @LIBDOVECOT@ +LIBDOVECOT_ACL_INCLUDE = @LIBDOVECOT_ACL_INCLUDE@ +LIBDOVECOT_AUTH_INCLUDE = @LIBDOVECOT_AUTH_INCLUDE@ +LIBDOVECOT_COMPRESS = @LIBDOVECOT_COMPRESS@ +LIBDOVECOT_COMPRESS_DEPS = @LIBDOVECOT_COMPRESS_DEPS@ +LIBDOVECOT_CONFIG_INCLUDE = @LIBDOVECOT_CONFIG_INCLUDE@ +LIBDOVECOT_DEPS = @LIBDOVECOT_DEPS@ +LIBDOVECOT_DOVEADM_INCLUDE = @LIBDOVECOT_DOVEADM_INCLUDE@ +LIBDOVECOT_DSYNC = @LIBDOVECOT_DSYNC@ +LIBDOVECOT_DSYNC_DEPS = @LIBDOVECOT_DSYNC_DEPS@ +LIBDOVECOT_DSYNC_INCLUDE = @LIBDOVECOT_DSYNC_INCLUDE@ +LIBDOVECOT_FTS_INCLUDE = @LIBDOVECOT_FTS_INCLUDE@ +LIBDOVECOT_IMAPC_INCLUDE = @LIBDOVECOT_IMAPC_INCLUDE@ +LIBDOVECOT_IMAP_INCLUDE = @LIBDOVECOT_IMAP_INCLUDE@ +LIBDOVECOT_IMAP_LOGIN_INCLUDE = @LIBDOVECOT_IMAP_LOGIN_INCLUDE@ +LIBDOVECOT_INCLUDE = @LIBDOVECOT_INCLUDE@ +LIBDOVECOT_LDA = @LIBDOVECOT_LDA@ +LIBDOVECOT_LDA_DEPS = @LIBDOVECOT_LDA_DEPS@ +LIBDOVECOT_LDA_INCLUDE = @LIBDOVECOT_LDA_INCLUDE@ +LIBDOVECOT_LIBFTS = @LIBDOVECOT_LIBFTS@ +LIBDOVECOT_LIBFTS_DEPS = @LIBDOVECOT_LIBFTS_DEPS@ +LIBDOVECOT_LIBFTS_INCLUDE = @LIBDOVECOT_LIBFTS_INCLUDE@ +LIBDOVECOT_LMTP_INCLUDE = @LIBDOVECOT_LMTP_INCLUDE@ +LIBDOVECOT_LOGIN = @LIBDOVECOT_LOGIN@ +LIBDOVECOT_LOGIN_DEPS = @LIBDOVECOT_LOGIN_DEPS@ +LIBDOVECOT_LOGIN_INCLUDE = @LIBDOVECOT_LOGIN_INCLUDE@ +LIBDOVECOT_LUA = @LIBDOVECOT_LUA@ +LIBDOVECOT_LUA_DEPS = @LIBDOVECOT_LUA_DEPS@ +LIBDOVECOT_LUA_INCLUDE = @LIBDOVECOT_LUA_INCLUDE@ +LIBDOVECOT_NOTIFY_INCLUDE = @LIBDOVECOT_NOTIFY_INCLUDE@ +LIBDOVECOT_POP3_INCLUDE = @LIBDOVECOT_POP3_INCLUDE@ +LIBDOVECOT_PUSH_NOTIFICATION_INCLUDE = @LIBDOVECOT_PUSH_NOTIFICATION_INCLUDE@ +LIBDOVECOT_SERVICE_INCLUDE = @LIBDOVECOT_SERVICE_INCLUDE@ +LIBDOVECOT_SQL = @LIBDOVECOT_SQL@ +LIBDOVECOT_SQL_DEPS = @LIBDOVECOT_SQL_DEPS@ +LIBDOVECOT_SQL_INCLUDE = @LIBDOVECOT_SQL_INCLUDE@ +LIBDOVECOT_SSL = @LIBDOVECOT_SSL@ +LIBDOVECOT_SSL_DEPS = @LIBDOVECOT_SSL_DEPS@ +LIBDOVECOT_STORAGE = @LIBDOVECOT_STORAGE@ +LIBDOVECOT_STORAGE_DEPS = @LIBDOVECOT_STORAGE_DEPS@ +LIBDOVECOT_STORAGE_INCLUDE = @LIBDOVECOT_STORAGE_INCLUDE@ +LIBDOVECOT_SUBMISSION_INCLUDE = @LIBDOVECOT_SUBMISSION_INCLUDE@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PIE_CFLAGS = @PIE_CFLAGS@ +PIE_LDFLAGS = @PIE_LDFLAGS@ +RANLIB = @RANLIB@ +RELRO_LDFLAGS = @RELRO_LDFLAGS@ +RUN_TEST = @RUN_TEST@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VALGRIND = @VALGRIND@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dovecot_docdir = @dovecot_docdir@ +dovecot_installed_moduledir = @dovecot_installed_moduledir@ +dovecot_moduledir = @dovecot_moduledir@ +dovecot_pkgincludedir = @dovecot_pkgincludedir@ +dovecot_pkglibdir = @dovecot_pkglibdir@ +dovecot_pkglibexecdir = @dovecot_pkglibexecdir@ +dovecot_statedir = @dovecot_statedir@ +dovecotdir = @dovecotdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +moduledir = @moduledir@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sieve_docdir = @sieve_docdir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +SUBDIRS = conf.d +pkgsysconfdir = $(sysconfdir)/dovecot +exampledir = $(dovecot_docdir)/example-config +example_DATA = \ + sieve-ldap.conf + +EXTRA_DIST = \ + $(example_DATA) + +all: all-recursive + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/example-config/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/example-config/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-exampleDATA: $(example_DATA) + @$(NORMAL_INSTALL) + @list='$(example_DATA)'; test -n "$(exampledir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(exampledir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(exampledir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(exampledir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(exampledir)" || exit $$?; \ + done + +uninstall-exampleDATA: + @$(NORMAL_UNINSTALL) + @list='$(example_DATA)'; test -n "$(exampledir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(exampledir)'; $(am__uninstall_files_from_dir) + +# This directory's subdirectories are mostly independent; you can cd +# into them and run 'make' without going through this Makefile. +# To change the values of 'make' variables: instead of editing Makefiles, +# (1) if the variable is set in 'config.status', edit 'config.status' +# (which will cause the Makefiles to be regenerated when you run 'make'); +# (2) otherwise, pass the desired values on the 'make' command line. +$(am__recursive_targets): + @fail=; \ + if $(am__make_keepgoing); then \ + failcom='fail=yes'; \ + else \ + failcom='exit 1'; \ + fi; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +ID: $(am__tagged_files) + $(am__define_uniq_tagged_files); mkid -fID $$unique +tags: tags-recursive +TAGS: tags + +tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + set x; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + $(am__define_uniq_tagged_files); \ + shift; \ + if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + if test $$# -gt 0; then \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + "$$@" $$unique; \ + else \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$unique; \ + fi; \ + fi +ctags: ctags-recursive + +CTAGS: ctags +ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) + $(am__define_uniq_tagged_files); \ + test -z "$(CTAGS_ARGS)$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && $(am__cd) $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) "$$here" +cscopelist: cscopelist-recursive + +cscopelist-am: $(am__tagged_files) + list='$(am__tagged_files)'; \ + case "$(srcdir)" in \ + [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ + *) sdir=$(subdir)/$(srcdir) ;; \ + esac; \ + for i in $$list; do \ + if test -f "$$i"; then \ + echo "$(subdir)/$$i"; \ + else \ + echo "$$sdir/$$i"; \ + fi; \ + done >> $(top_builddir)/cscope.files + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done + @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + $(am__make_dryrun) \ + || test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ + $(am__relativize); \ + new_distdir=$$reldir; \ + dir1=$$subdir; dir2="$(top_distdir)"; \ + $(am__relativize); \ + new_top_distdir=$$reldir; \ + echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ + echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ + ($(am__cd) $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$new_top_distdir" \ + distdir="$$new_distdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + am__skip_mode_fix=: \ + distdir) \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-recursive +all-am: Makefile $(DATA) +installdirs: installdirs-recursive +installdirs-am: + for dir in "$(DESTDIR)$(exampledir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +html-am: + +info: info-recursive + +info-am: + +install-data-am: install-exampleDATA + +install-dvi: install-dvi-recursive + +install-dvi-am: + +install-exec-am: + +install-html: install-html-recursive + +install-html-am: + +install-info: install-info-recursive + +install-info-am: + +install-man: + +install-pdf: install-pdf-recursive + +install-pdf-am: + +install-ps: install-ps-recursive + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: uninstall-exampleDATA + +.MAKE: $(am__recursive_targets) install-am install-strip + +.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \ + check-am clean clean-generic clean-libtool cscopelist-am ctags \ + ctags-am distclean distclean-generic distclean-libtool \ + distclean-tags distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exampleDATA install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ + uninstall-am uninstall-exampleDATA + +.PRECIOUS: Makefile + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/pigeonhole/doc/example-config/conf.d/20-managesieve.conf b/pigeonhole/doc/example-config/conf.d/20-managesieve.conf new file mode 100644 index 0000000..3f71b58 --- /dev/null +++ b/pigeonhole/doc/example-config/conf.d/20-managesieve.conf @@ -0,0 +1,84 @@ +## +## ManageSieve specific settings +## + +# Uncomment to enable managesieve protocol: +#protocols = $protocols sieve + +# Service definitions + +#service managesieve-login { + #inet_listener sieve { + # port = 4190 + #} + + #inet_listener sieve_deprecated { + # port = 2000 + #} + + # Number of connections to handle before starting a new process. Typically + # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0 + # is faster. <doc/wiki/LoginProcess.txt> + #service_count = 1 + + # Number of processes to always keep waiting for more connections. + #process_min_avail = 0 + + # If you set service_count=0, you probably need to grow this. + #vsz_limit = 64M +#} + +#service managesieve { + # Max. number of ManageSieve processes (connections) + #process_limit = 1024 +#} + +# Service configuration + +protocol sieve { + # Maximum ManageSieve command line length in bytes. ManageSieve usually does + # not involve overly long command lines, so this setting will not normally + # need adjustment + #managesieve_max_line_length = 65536 + + # Maximum number of ManageSieve connections allowed for a user from each IP + # address. + # NOTE: The username is compared case-sensitively. + #mail_max_userip_connections = 10 + + # Space separated list of plugins to load (none known to be useful so far). + # Do NOT try to load IMAP plugins here. + #mail_plugins = + + # MANAGESIEVE logout format string: + # %i - total number of bytes read from client + # %o - total number of bytes sent to client + # %{put_bytes} - Number of bytes saved using PUTSCRIPT command + # %{put_count} - Number of scripts saved using PUTSCRIPT command + # %{get_bytes} - Number of bytes read using GETCRIPT command + # %{get_count} - Number of scripts read using GETSCRIPT command + # %{get_bytes} - Number of bytes processed using CHECKSCRIPT command + # %{get_count} - Number of scripts checked using CHECKSCRIPT command + # %{deleted_count} - Number of scripts deleted using DELETESCRIPT command + # %{renamed_count} - Number of scripts renamed using RENAMESCRIPT command + #managesieve_logout_format = bytes=%i/%o + + # To fool ManageSieve clients that are focused on CMU's timesieved you can + # specify the IMPLEMENTATION capability that Dovecot reports to clients. + # For example: 'Cyrus timsieved v2.2.13' + #managesieve_implementation_string = Dovecot Pigeonhole + + # Explicitly specify the SIEVE and NOTIFY capability reported by the server + # before login. If left unassigned these will be reported dynamically + # according to what the Sieve interpreter supports by default (after login + # this may differ depending on the user). + #managesieve_sieve_capability = + #managesieve_notify_capability = + + # The maximum number of compile errors that are returned to the client upon + # script upload or script verification. + #managesieve_max_compile_errors = 5 + + # Refer to 90-sieve.conf for script quota configuration and configuration of + # Sieve execution limits. +} diff --git a/pigeonhole/doc/example-config/conf.d/90-sieve-extprograms.conf b/pigeonhole/doc/example-config/conf.d/90-sieve-extprograms.conf new file mode 100644 index 0000000..17dcb77 --- /dev/null +++ b/pigeonhole/doc/example-config/conf.d/90-sieve-extprograms.conf @@ -0,0 +1,44 @@ +# Sieve Extprograms plugin configuration + +# Don't forget to add the sieve_extprograms plugin to the sieve_plugins setting. +# Also enable the extensions you need (one or more of vnd.dovecot.pipe, +# vnd.dovecot.filter and vnd.dovecot.execute) by adding these to the +# sieve_extensions or sieve_global_extensions settings. Restricting these +# extensions to a global context using sieve_global_extensions is recommended. + +plugin { + + # The directory where the program sockets are located for the + # vnd.dovecot.pipe, vnd.dovecot.filter and vnd.dovecot.execute extension + # respectively. The name of each unix socket contained in that directory + # directly maps to a program-name referenced from the Sieve script. + #sieve_pipe_socket_dir = sieve-pipe + #sieve_filter_socket_dir = sieve-filter + #sieve_execute_socket_dir = sieve-execute + + # The directory where the scripts are located for direct execution by the + # vnd.dovecot.pipe, vnd.dovecot.filter and vnd.dovecot.execute extension + # respectively. The name of each script contained in that directory + # directly maps to a program-name referenced from the Sieve script. + #sieve_pipe_bin_dir = /usr/lib/dovecot/sieve-pipe + #sieve_filter_bin_dir = /usr/lib/dovecot/sieve-filter + #sieve_execute_bin_dir = /usr/lib/dovecot/sieve-execute +} + +# An example program service called 'do-something' to pipe messages to +#service do-something { + # Define the executed script as parameter to the sieve service + #executable = script /usr/lib/dovecot/sieve-pipe/do-something.sh + + # Use some unprivileged user for executing the program + #user = dovenull + + # The unix socket located in the sieve_pipe_socket_dir (as defined in the + # plugin {} section above) + #unix_listener sieve-pipe/do-something { + # LDA/LMTP must have access + # user = vmail + # mode = 0600 + #} +#} + diff --git a/pigeonhole/doc/example-config/conf.d/90-sieve.conf b/pigeonhole/doc/example-config/conf.d/90-sieve.conf new file mode 100644 index 0000000..238bcf4 --- /dev/null +++ b/pigeonhole/doc/example-config/conf.d/90-sieve.conf @@ -0,0 +1,205 @@ +## +## Settings for the Sieve interpreter +## + +# Do not forget to enable the Sieve plugin in 15-lda.conf and 20-lmtp.conf +# by adding it to the respective mail_plugins= settings. + +# The Sieve interpreter can retrieve Sieve scripts from several types of +# locations. The default `file' location type is a local filesystem path +# pointing to a Sieve script file or a directory containing multiple Sieve +# script files. More complex setups can use other location types such as +# `ldap' or `dict' to fetch Sieve scripts from remote databases. +# +# All settings that specify the location of one ore more Sieve scripts accept +# the following syntax: +# +# location = [<type>:]path[;<option>[=<value>][;...]] +# +# If the type prefix is omitted, the script location type is 'file' and the +# location is interpreted as a local filesystem path pointing to a Sieve script +# file or directory. Refer to Pigeonhole wiki or INSTALL file for more +# information. + +plugin { + # The location of the user's main Sieve script or script storage. The LDA + # Sieve plugin uses this to find the active script for Sieve filtering at + # delivery. The "include" extension uses this location for retrieving + # :personal" scripts. This is also where the ManageSieve service will store + # the user's scripts, if supported. + # + # Currently only the 'file:' location type supports ManageSieve operation. + # Other location types like 'dict:' and 'ldap:' can currently only + # be used as a read-only script source (). + # + # For the 'file:' type: use the ';active=' parameter to specify where the + # active script symlink is located. + # For other types: use the ';name=' parameter to specify the name of the + # default/active script. + sieve = file:~/sieve;active=~/.dovecot.sieve + + # The default Sieve script when the user has none. This is the location of a + # global sieve script file, which gets executed ONLY if user's personal Sieve + # script doesn't exist. Be sure to pre-compile this script manually using the + # sievec command line tool if the binary is not stored in a global location. + # --> See sieve_before for executing scripts before the user's personal + # script. + #sieve_default = /var/lib/dovecot/sieve/default.sieve + + # The name by which the default Sieve script (as configured by the + # sieve_default setting) is visible to the user through ManageSieve. + #sieve_default_name = + + # Location for ":global" include scripts as used by the "include" extension. + #sieve_global = + + # The location of a Sieve script that is run for any message that is about to + # be discarded; i.e., it is not delivered anywhere by the normal Sieve + # execution. This only happens when the "implicit keep" is canceled, by e.g. + # the "discard" action, and no actions that deliver the message are executed. + # This "discard script" can prevent discarding the message, by executing + # alternative actions. If the discard script does nothing, the message is + # still discarded as it would be when no discard script is configured. + #sieve_discard = + + # Location Sieve of scripts that need to be executed before the user's + # personal script. If a 'file' location path points to a directory, all the + # Sieve scripts contained therein (with the proper `.sieve' extension) are + # executed. The order of execution within that directory is determined by the + # file names, using a normal 8bit per-character comparison. + # + # Multiple script locations can be specified by appending an increasing number + # to the setting name. The Sieve scripts found from these locations are added + # to the script execution sequence in the specified order. Reading the + # numbered sieve_before settings stops at the first missing setting, so no + # numbers may be skipped. + #sieve_before = /var/lib/dovecot/sieve.d/ + #sieve_before2 = ldap:/etc/sieve-ldap.conf;name=ldap-domain + #sieve_before3 = (etc...) + + # Identical to sieve_before, only the specified scripts are executed after the + # user's script (only when keep is still in effect!). Multiple script + # locations can be specified by appending an increasing number. + #sieve_after = + #sieve_after2 = + #sieve_after2 = (etc...) + + # Which Sieve language extensions are available to users. By default, all + # supported extensions are available, except for deprecated extensions or + # those that are still under development. Some system administrators may want + # to disable certain Sieve extensions or enable those that are not available + # by default. This setting can use '+' and '-' to specify differences relative + # to the default. For example `sieve_extensions = +imapflags' will enable the + # deprecated imapflags extension in addition to all extensions were already + # enabled by default. + #sieve_extensions = +notify +imapflags + + # Which Sieve language extensions are ONLY available in global scripts. This + # can be used to restrict the use of certain Sieve extensions to administrator + # control, for instance when these extensions can cause security concerns. + # This setting has higher precedence than the `sieve_extensions' setting + # (above), meaning that the extensions enabled with this setting are never + # available to the user's personal script no matter what is specified for the + # `sieve_extensions' setting. The syntax of this setting is similar to the + # `sieve_extensions' setting, with the difference that extensions are + # enabled or disabled for exclusive use in global scripts. Currently, no + # extensions are marked as such by default. + #sieve_global_extensions = + + # The Pigeonhole Sieve interpreter can have plugins of its own. Using this + # setting, the used plugins can be specified. Check the Dovecot wiki + # (wiki2.dovecot.org) or the pigeonhole website + # (http://pigeonhole.dovecot.org) for available plugins. + # The sieve_extprograms plugin is included in this release. + #sieve_plugins = + + # The maximum size of a Sieve script. The compiler will refuse to compile any + # script larger than this limit. If set to 0, no limit on the script size is + # enforced. + #sieve_max_script_size = 1M + + # The maximum number of actions that can be performed during a single script + # execution. If set to 0, no limit on the total number of actions is enforced. + #sieve_max_actions = 32 + + # The maximum number of redirect actions that can be performed during a single + # script execution. If set to 0, no redirect actions are allowed. + #sieve_max_redirects = 4 + + # The maximum number of personal Sieve scripts a single user can have. If set + # to 0, no limit on the number of scripts is enforced. + # (Currently only relevant for ManageSieve) + #sieve_quota_max_scripts = 0 + + # The maximum amount of disk storage a single user's scripts may occupy. If + # set to 0, no limit on the used amount of disk storage is enforced. + # (Currently only relevant for ManageSieve) + #sieve_quota_max_storage = 0 + + # The primary e-mail address for the user. This is used as a default when no + # other appropriate address is available for sending messages. If this setting + # is not configured, either the postmaster or null "<>" address is used as a + # sender, depending on the action involved. This setting is important when + # there is no message envelope to extract addresses from, such as when the + # script is executed in IMAP. + #sieve_user_email = + + # The path to the file where the user log is written. If not configured, a + # default location is used. If the main user's personal Sieve (as configured + # with sieve=) is a file, the logfile is set to <filename>.log by default. If + # it is not a file, the default user log file is ~/.dovecot.sieve.log. + #sieve_user_log = + + # Specifies what envelope sender address is used for redirected messages. + # The following values are supported for this setting: + # + # "sender" - The sender address is used (default). + # "recipient" - The final recipient address is used. + # "orig_recipient" - The original recipient is used. + # "user_email" - The user's primary address is used. This is + # configured with the "sieve_user_email" setting. If + # that setting is unconfigured, "user_mail" is equal to + # "recipient". + # "postmaster" - The postmaster_address configured for the LDA. + # "<user@domain>" - Redirected messages are always sent from user@domain. + # The angle brackets are mandatory. The null "<>" address + # is also supported. + # + # This setting is ignored when the envelope sender is "<>". In that case the + # sender of the redirected message is also always "<>". + #sieve_redirect_envelope_from = sender + + ## TRACE DEBUGGING + # Trace debugging provides detailed insight in the operations performed by + # the Sieve script. These settings apply to both the LDA Sieve plugin and the + # IMAPSIEVE plugin. + # + # WARNING: On a busy server, this functionality can quickly fill up the trace + # directory with a lot of trace files. Enable this only temporarily and as + # selective as possible. + + # The directory where trace files are written. Trace debugging is disabled if + # this setting is not configured or if the directory does not exist. If the + # path is relative or it starts with "~/" it is interpreted relative to the + # current user's home directory. + #sieve_trace_dir = + + # The verbosity level of the trace messages. Trace debugging is disabled if + # this setting is not configured. Possible values are: + # + # "actions" - Only print executed action commands, like keep, + # fileinto, reject and redirect. + # "commands" - Print any executed command, excluding test commands. + # "tests" - Print all executed commands and performed tests. + # "matching" - Print all executed commands, performed tests and the + # values matched in those tests. + #sieve_trace_level = + + # Enables highly verbose debugging messages that are usually only useful for + # developers. + #sieve_trace_debug = no + + # Enables showing byte code addresses in the trace output, rather than only + # the source line numbers. + #sieve_trace_addresses = no +} diff --git a/pigeonhole/doc/example-config/conf.d/Makefile.am b/pigeonhole/doc/example-config/conf.d/Makefile.am new file mode 100644 index 0000000..8cea566 --- /dev/null +++ b/pigeonhole/doc/example-config/conf.d/Makefile.am @@ -0,0 +1,10 @@ +pkgsysconfdir = $(sysconfdir)/dovecot + +exampledir = $(dovecot_docdir)/example-config/conf.d +example_DATA = \ + 20-managesieve.conf \ + 90-sieve.conf \ + 90-sieve-extprograms.conf + +EXTRA_DIST = \ + $(example_DATA) diff --git a/pigeonhole/doc/example-config/conf.d/Makefile.in b/pigeonhole/doc/example-config/conf.d/Makefile.in new file mode 100644 index 0000000..68b0aa1 --- /dev/null +++ b/pigeonhole/doc/example-config/conf.d/Makefile.in @@ -0,0 +1,576 @@ +# Makefile.in generated by automake 1.16.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994-2018 Free Software Foundation, Inc. + +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +am__is_gnu_make = { \ + if test -z '$(MAKELEVEL)'; then \ + false; \ + elif test -n '$(MAKE_HOST)'; then \ + true; \ + elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ + true; \ + else \ + false; \ + fi; \ +} +am__make_running_with_option = \ + case $${target_option-} in \ + ?) ;; \ + *) echo "am__make_running_with_option: internal error: invalid" \ + "target option '$${target_option-}' specified" >&2; \ + exit 1;; \ + esac; \ + has_opt=no; \ + sane_makeflags=$$MAKEFLAGS; \ + if $(am__is_gnu_make); then \ + sane_makeflags=$$MFLAGS; \ + else \ + case $$MAKEFLAGS in \ + *\\[\ \ ]*) \ + bs=\\; \ + sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ + | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ + esac; \ + fi; \ + skip_next=no; \ + strip_trailopt () \ + { \ + flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ + }; \ + for flg in $$sane_makeflags; do \ + test $$skip_next = yes && { skip_next=no; continue; }; \ + case $$flg in \ + *=*|--*) continue;; \ + -*I) strip_trailopt 'I'; skip_next=yes;; \ + -*I?*) strip_trailopt 'I';; \ + -*O) strip_trailopt 'O'; skip_next=yes;; \ + -*O?*) strip_trailopt 'O';; \ + -*l) strip_trailopt 'l'; skip_next=yes;; \ + -*l?*) strip_trailopt 'l';; \ + -[dEDm]) skip_next=yes;; \ + -[JT]) skip_next=yes;; \ + esac; \ + case $$flg in \ + *$$target_option*) has_opt=yes; break;; \ + esac; \ + done; \ + test $$has_opt = yes +am__make_dryrun = (target_option=n; $(am__make_running_with_option)) +am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) +pkgdatadir = $(datadir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkglibexecdir = $(libexecdir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = doc/example-config/conf.d +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/dovecot.m4 \ + $(top_srcdir)/m4/libtool.m4 $(top_srcdir)/m4/ltoptions.m4 \ + $(top_srcdir)/m4/ltsugar.m4 $(top_srcdir)/m4/ltversion.m4 \ + $(top_srcdir)/m4/lt~obsolete.m4 $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +DIST_COMMON = $(srcdir)/Makefile.am $(am__DIST_COMMON) +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = $(top_builddir)/dummy-config.h \ + $(top_builddir)/pigeonhole-config.h +CONFIG_CLEAN_FILES = +CONFIG_CLEAN_VPATH_FILES = +AM_V_P = $(am__v_P_@AM_V@) +am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) +am__v_P_0 = false +am__v_P_1 = : +AM_V_GEN = $(am__v_GEN_@AM_V@) +am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) +am__v_GEN_0 = @echo " GEN " $@; +am__v_GEN_1 = +AM_V_at = $(am__v_at_@AM_V@) +am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) +am__v_at_0 = @ +am__v_at_1 = +SOURCES = +DIST_SOURCES = +am__can_run_installinfo = \ + case $$AM_UPDATE_INFO_DIR in \ + n|no|NO) false;; \ + *) (install-info --version) >/dev/null 2>&1;; \ + esac +am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; +am__vpath_adj = case $$p in \ + $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ + *) f=$$p;; \ + esac; +am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; +am__install_max = 40 +am__nobase_strip_setup = \ + srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` +am__nobase_strip = \ + for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" +am__nobase_list = $(am__nobase_strip_setup); \ + for p in $$list; do echo "$$p $$p"; done | \ + sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ + $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ + if (++n[$$2] == $(am__install_max)) \ + { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ + END { for (dir in files) print dir, files[dir] }' +am__base_list = \ + sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ + sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' +am__uninstall_files_from_dir = { \ + test -z "$$files" \ + || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ + || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ + $(am__cd) "$$dir" && rm -f $$files; }; \ + } +am__installdirs = "$(DESTDIR)$(exampledir)" +DATA = $(example_DATA) +am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) +am__DIST_COMMON = $(srcdir)/Makefile.in +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +BINARY_CFLAGS = @BINARY_CFLAGS@ +BINARY_LDFLAGS = @BINARY_LDFLAGS@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DISTCHECK_CONFIGURE_FLAGS = @DISTCHECK_CONFIGURE_FLAGS@ +DLLTOOL = @DLLTOOL@ +DOVECOT_BINARY_CFLAGS = @DOVECOT_BINARY_CFLAGS@ +DOVECOT_BINARY_LDFLAGS = @DOVECOT_BINARY_LDFLAGS@ +DOVECOT_CFLAGS = @DOVECOT_CFLAGS@ +DOVECOT_COMPRESS_LIBS = @DOVECOT_COMPRESS_LIBS@ +DOVECOT_INSTALLED = @DOVECOT_INSTALLED@ +DOVECOT_LIBS = @DOVECOT_LIBS@ +DOVECOT_LUA_CFLAGS = @DOVECOT_LUA_CFLAGS@ +DOVECOT_LUA_LIBS = @DOVECOT_LUA_LIBS@ +DOVECOT_SQL_LIBS = @DOVECOT_SQL_LIBS@ +DOVECOT_SSL_LIBS = @DOVECOT_SSL_LIBS@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDAP_LIBS = @LDAP_LIBS@ +LDFLAGS = @LDFLAGS@ +LIBDOVECOT = @LIBDOVECOT@ +LIBDOVECOT_ACL_INCLUDE = @LIBDOVECOT_ACL_INCLUDE@ +LIBDOVECOT_AUTH_INCLUDE = @LIBDOVECOT_AUTH_INCLUDE@ +LIBDOVECOT_COMPRESS = @LIBDOVECOT_COMPRESS@ +LIBDOVECOT_COMPRESS_DEPS = @LIBDOVECOT_COMPRESS_DEPS@ +LIBDOVECOT_CONFIG_INCLUDE = @LIBDOVECOT_CONFIG_INCLUDE@ +LIBDOVECOT_DEPS = @LIBDOVECOT_DEPS@ +LIBDOVECOT_DOVEADM_INCLUDE = @LIBDOVECOT_DOVEADM_INCLUDE@ +LIBDOVECOT_DSYNC = @LIBDOVECOT_DSYNC@ +LIBDOVECOT_DSYNC_DEPS = @LIBDOVECOT_DSYNC_DEPS@ +LIBDOVECOT_DSYNC_INCLUDE = @LIBDOVECOT_DSYNC_INCLUDE@ +LIBDOVECOT_FTS_INCLUDE = @LIBDOVECOT_FTS_INCLUDE@ +LIBDOVECOT_IMAPC_INCLUDE = @LIBDOVECOT_IMAPC_INCLUDE@ +LIBDOVECOT_IMAP_INCLUDE = @LIBDOVECOT_IMAP_INCLUDE@ +LIBDOVECOT_IMAP_LOGIN_INCLUDE = @LIBDOVECOT_IMAP_LOGIN_INCLUDE@ +LIBDOVECOT_INCLUDE = @LIBDOVECOT_INCLUDE@ +LIBDOVECOT_LDA = @LIBDOVECOT_LDA@ +LIBDOVECOT_LDA_DEPS = @LIBDOVECOT_LDA_DEPS@ +LIBDOVECOT_LDA_INCLUDE = @LIBDOVECOT_LDA_INCLUDE@ +LIBDOVECOT_LIBFTS = @LIBDOVECOT_LIBFTS@ +LIBDOVECOT_LIBFTS_DEPS = @LIBDOVECOT_LIBFTS_DEPS@ +LIBDOVECOT_LIBFTS_INCLUDE = @LIBDOVECOT_LIBFTS_INCLUDE@ +LIBDOVECOT_LMTP_INCLUDE = @LIBDOVECOT_LMTP_INCLUDE@ +LIBDOVECOT_LOGIN = @LIBDOVECOT_LOGIN@ +LIBDOVECOT_LOGIN_DEPS = @LIBDOVECOT_LOGIN_DEPS@ +LIBDOVECOT_LOGIN_INCLUDE = @LIBDOVECOT_LOGIN_INCLUDE@ +LIBDOVECOT_LUA = @LIBDOVECOT_LUA@ +LIBDOVECOT_LUA_DEPS = @LIBDOVECOT_LUA_DEPS@ +LIBDOVECOT_LUA_INCLUDE = @LIBDOVECOT_LUA_INCLUDE@ +LIBDOVECOT_NOTIFY_INCLUDE = @LIBDOVECOT_NOTIFY_INCLUDE@ +LIBDOVECOT_POP3_INCLUDE = @LIBDOVECOT_POP3_INCLUDE@ +LIBDOVECOT_PUSH_NOTIFICATION_INCLUDE = @LIBDOVECOT_PUSH_NOTIFICATION_INCLUDE@ +LIBDOVECOT_SERVICE_INCLUDE = @LIBDOVECOT_SERVICE_INCLUDE@ +LIBDOVECOT_SQL = @LIBDOVECOT_SQL@ +LIBDOVECOT_SQL_DEPS = @LIBDOVECOT_SQL_DEPS@ +LIBDOVECOT_SQL_INCLUDE = @LIBDOVECOT_SQL_INCLUDE@ +LIBDOVECOT_SSL = @LIBDOVECOT_SSL@ +LIBDOVECOT_SSL_DEPS = @LIBDOVECOT_SSL_DEPS@ +LIBDOVECOT_STORAGE = @LIBDOVECOT_STORAGE@ +LIBDOVECOT_STORAGE_DEPS = @LIBDOVECOT_STORAGE_DEPS@ +LIBDOVECOT_STORAGE_INCLUDE = @LIBDOVECOT_STORAGE_INCLUDE@ +LIBDOVECOT_SUBMISSION_INCLUDE = @LIBDOVECOT_SUBMISSION_INCLUDE@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MANIFEST_TOOL = @MANIFEST_TOOL@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_URL = @PACKAGE_URL@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +PIE_CFLAGS = @PIE_CFLAGS@ +PIE_LDFLAGS = @PIE_LDFLAGS@ +RANLIB = @RANLIB@ +RELRO_LDFLAGS = @RELRO_LDFLAGS@ +RUN_TEST = @RUN_TEST@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VALGRIND = @VALGRIND@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_AR = @ac_ct_AR@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dovecot_docdir = @dovecot_docdir@ +dovecot_installed_moduledir = @dovecot_installed_moduledir@ +dovecot_moduledir = @dovecot_moduledir@ +dovecot_pkgincludedir = @dovecot_pkgincludedir@ +dovecot_pkglibdir = @dovecot_pkglibdir@ +dovecot_pkglibexecdir = @dovecot_pkglibexecdir@ +dovecot_statedir = @dovecot_statedir@ +dovecotdir = @dovecotdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +moduledir = @moduledir@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +runstatedir = @runstatedir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +sieve_docdir = @sieve_docdir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +pkgsysconfdir = $(sysconfdir)/dovecot +exampledir = $(dovecot_docdir)/example-config/conf.d +example_DATA = \ + 20-managesieve.conf \ + 90-sieve.conf \ + 90-sieve-extprograms.conf + +EXTRA_DIST = \ + $(example_DATA) + +all: all-am + +.SUFFIXES: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ + && { if test -f $@; then exit 0; else break; fi; }; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/example-config/conf.d/Makefile'; \ + $(am__cd) $(top_srcdir) && \ + $(AUTOMAKE) --foreign doc/example-config/conf.d/Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__maybe_remake_depfiles);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh +$(am__aclocal_m4_deps): + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs +install-exampleDATA: $(example_DATA) + @$(NORMAL_INSTALL) + @list='$(example_DATA)'; test -n "$(exampledir)" || list=; \ + if test -n "$$list"; then \ + echo " $(MKDIR_P) '$(DESTDIR)$(exampledir)'"; \ + $(MKDIR_P) "$(DESTDIR)$(exampledir)" || exit 1; \ + fi; \ + for p in $$list; do \ + if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ + echo "$$d$$p"; \ + done | $(am__base_list) | \ + while read files; do \ + echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(exampledir)'"; \ + $(INSTALL_DATA) $$files "$(DESTDIR)$(exampledir)" || exit $$?; \ + done + +uninstall-exampleDATA: + @$(NORMAL_UNINSTALL) + @list='$(example_DATA)'; test -n "$(exampledir)" || list=; \ + files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ + dir='$(DESTDIR)$(exampledir)'; $(am__uninstall_files_from_dir) +tags TAGS: + +ctags CTAGS: + +cscope cscopelist: + + +distdir: $(BUILT_SOURCES) + $(MAKE) $(AM_MAKEFLAGS) distdir-am + +distdir-am: $(DISTFILES) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d "$(distdir)/$$file"; then \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ + find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ + fi; \ + cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ + else \ + test -f "$(distdir)/$$file" \ + || cp -p $$d/$$file "$(distdir)/$$file" \ + || exit 1; \ + fi; \ + done +check-am: all-am +check: check-am +all-am: Makefile $(DATA) +installdirs: + for dir in "$(DESTDIR)$(exampledir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + if test -z '$(STRIP)'; then \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + install; \ + else \ + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ + fi +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +html-am: + +info: info-am + +info-am: + +install-data-am: install-exampleDATA + +install-dvi: install-dvi-am + +install-dvi-am: + +install-exec-am: + +install-html: install-html-am + +install-html-am: + +install-info: install-info-am + +install-info-am: + +install-man: + +install-pdf: install-pdf-am + +install-pdf-am: + +install-ps: install-ps-am + +install-ps-am: + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-exampleDATA + +.MAKE: install-am install-strip + +.PHONY: all all-am check check-am clean clean-generic clean-libtool \ + cscopelist-am ctags-am distclean distclean-generic \ + distclean-libtool distdir dvi dvi-am html html-am info info-am \ + install install-am install-data install-data-am install-dvi \ + install-dvi-am install-exampleDATA install-exec \ + install-exec-am install-html install-html-am install-info \ + install-info-am install-man install-pdf install-pdf-am \ + install-ps install-ps-am install-strip installcheck \ + installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic \ + mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \ + uninstall-am uninstall-exampleDATA + +.PRECIOUS: Makefile + + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/pigeonhole/doc/example-config/sieve-ldap.conf b/pigeonhole/doc/example-config/sieve-ldap.conf new file mode 100644 index 0000000..0325ee5 --- /dev/null +++ b/pigeonhole/doc/example-config/sieve-ldap.conf @@ -0,0 +1,74 @@ +# This file needs to be accessible by the Sieve interpreter running in LDA/LMTP. +# This requires acces by the mail user. Don't use privileged LDAP credentials +# here as these may likely leak. Only search and read access is required. + +# Space separated list of LDAP hosts to use. host:port is allowed too. +hosts = localhost + +# LDAP URIs to use. You can use this instead of hosts list. Note that this +# setting isn't supported by all LDAP libraries. +#uris = + +# Distinguished Name - the username used to login to the LDAP server. +# Leave it commented out to bind anonymously. +#dn = + +# Password for LDAP server, if dn is specified. +#dnpass = + +# Use SASL binding instead of the simple binding. Note that this changes +# ldap_version automatically to be 3 if it's lower. +#sasl_bind = no +# SASL mechanism name to use. +#sasl_mech = +# SASL realm to use. +#sasl_realm = +# SASL authorization ID, ie. the dnpass is for this "master user", but the +# dn is still the logged in user. Normally you want to keep this empty. +#sasl_authz_id = + +# Use TLS to connect to the LDAP server. +#tls = no +# TLS options, currently supported only with OpenLDAP: +#tls_ca_cert_file = +#tls_ca_cert_dir = +#tls_cipher_suite = +# TLS cert/key is used only if LDAP server requires a client certificate. +#tls_cert_file = +#tls_key_file = +# Valid values: never, hard, demand, allow, try +#tls_require_cert = + +# Use the given ldaprc path. +#ldaprc_path = + +# LDAP library debug level as specified by LDAP_DEBUG_* in ldap_log.h. +# -1 = everything. You may need to recompile OpenLDAP with debugging enabled +# to get enough output. +#debug_level = 0 + +# LDAP protocol version to use. Likely 2 or 3. +#ldap_version = 3 + +# LDAP base. %variables can be used here. +# For example: dc=mail, dc=example, dc=org +base = + +# Dereference: never, searching, finding, always +#deref = never + +# Search scope: base, onelevel, subtree +#scope = subtree + +# Filter for user lookup. Some variables can be used: +# %u - username +# %n - user part in user@domain, same as %u if there's no domain +# %d - domain part in user@domain, empty if there's no domain +# %{name} - name of the Sieve script +#sieve_ldap_filter = (&(objectClass=posixAccount)(uid=%u)) + +# Attribute containing the Sieve script +#sieve_ldap_script_attr = mailSieveRuleSource + +# Attribute used for modification tracking +#sieve_ldap_mod_attr = modifyTimestamp |